Need a solution of publishing video and audio together

we hope to implement something like below:
fms publish a stream to one client,while the client receive
the stream,the client publish the received stream and the audio
stream which record from the client's microphone together.and fms
publish the client's stream to others client.
but we failed to republish the received stream to fms.
the republish code(not all):
var nc:NetConnection=new NetConnection();
var ns:NetStream=new NetStream(nc);
ns.play("test");//fms stream
ns.attachAudio(Microphone.getMicrophone(0));
ns.publish("fromclient","live");

Hi Kai
What do you mean by lines in infopackage, is that no of records

Similar Messages

  • How can you use one NetStream to publish video and audio from another NetStream in AS3?

    Let's say one of your client programs in AS3 is able to receive live video and audio from a NetStream and play it on the screen.  How could you make it also take that video/audio stream that it's receiving, copy it over into another NetStream, and publish it elsewhere?  I need to know how to do with this regardless of whether RTMP, RTMFP, or some mixture is involved.  The reason why the stream needs to be relayed this way is a real long story, but it's necessary in this particular case. Thanks!

    RTMP is TCP, which has higher overhead and latency because it guarantees packets are delivered (handshaking, causing latency and overhead). It also doesn't allow you to share connections directly between clients forcing the server to do all the work.
    RTMFP uses UDP, which is a choice protocol for streaming video because it's the opposite. It's lossy which decreases latency and overhead from no retransmissions and most importantly (in some applications) allows you to connect directly from one Flash Player to another Flash Player (p2p) so the server overhead is dramatically reduced. The server is only required to negotiate the initial connection and then it's up to the clients to continue to facilitate that.
    How you code your one to many or many to many relationship broadcast network will be based entirely on which of those you choose.
    URLStream is very common to use in p2p. Here's an older Adobe article on p2p and an alternate quick old video tutorial (FP10) as a quick simple example of p2p over RTMFP you can view the source of.

  • Can't get video and audio together on mpeg

    Hey..... I need to know this is very simple terms...... I'm really ignorant to all of the technical terms, etc. I've followed the procedure for compressing out of fcp and when it finally finishes, there is no audio. some projects are fcp, some are QT brought into fcp. Can anyone give me a simple step by step procedure for this? I'm using the Weyland book right now.

    so you need elementary stream files, bcz DVDSP would mux it for you.
    ok, just use compressor and create 2 files, one for the audio and one for the video.
    of course i am assuming that you are using compressor 2. when you select a preset, you can set video and audio. make sure its dolby (2.0) if its stereo.
    if you have compressor 1, then use compressor only for the video and use A.Pack for the audio.
    both of the above mentioned methods will provide you with 2 files, a video file with the extension *.m2v and a audio file with the extension *.ac3.
    both of these files can be imported into DVD SP.
    Mikey

  • Are there any 30 pin female to lightning adapters that support video and audio together?

    I have a wowwee cinemin slice projector and I wondering if there are any products that will convert the 30 pin to lightning that supports audio and video, since the Wowwee Cinemin Slice plays video through the iPhone, but currently only has the 30 pin adapter?  Thanks so much.

    yeah, and I can't believe that you can't buy sushi for breakfast, but there it is. Chris CA is right. Lightning will NOT support analog video out. It will do audio, though. So...your best bet would be to buy a Lightning digital AV adapter (2nd generation) then try to find an HDMI to 30 pin cable. I'm presuming that the wowee has a 30 pin socket on it... I see.... it also has a VGA and a mini-HDMI port on it, so you'll have to use the last two, perhaps, unless you can find  cable that goes from HDMI to 30 pin male end, then 30 pin female to female, to finally connect with the wowee. I  have yet to see a 30 pin female to female adapter, and I suspect there will never be one.  I can't believe many things, either, scoody. Apple is not known for going backwards, once it has introduced a new standard. It may try to acommodate some people, but it will never be able to please everyone.  In any event,  I think it was mentioned by Apple that, in moving to Lightning, some 30 pin stuff might not work, and the wowee cinemin slice is probably one of those things...
    welp--there you go
    John B

  • Resizing Video and Audio At Once

    I need to resize both the Video and Audio concurrently. However, following these directions as provided for in the Manual is not working; only one or the other will resize. What am I doing wrong? - Thanks, Lyman
    "To resize both video and audio tracks at once:
    Hold down the Shift key, then drag any track boundary to resize it. All tracks in the Timeline are resized by the same amount."

    Naw, not that...seriously, this is not working pursuant to the Manual which leads me to believe if perhaps some errata is present in the manual? This is one time where the problem does not lay between the chair and monitor!
    Thanks,
    Lyman

  • CS4 Pro saving video, and audio.. seperate

    I need to have the video and audio together.. not two seperate files, my project is due in two days and I have no idea how to get them both together.. I'm using cs4 master collection!

    >export the file to a dvd
    You do not export the file TO a DVD... you export FOR a DVD
    Exporting video and audio as 2 files is by design... or you may export as AVI and use that in Encore
    You then open ENCORE and have it read your 2 files and you AUTHOR to DVD, and then Encore will write the DVD
    Since you want many copiers, you would author with Encore and then instead of writing a DVD you would tell encore to write an ISO file to your hard drive, and use the FREE http://www.imgburn.com/index.php?act=download to write to DVD

  • How can I use QuickTime to make a screen recording that has both video and audio?

    How do use QuickTime to make a screen recording that can be saved with both video and audio together?

    do you know of any software that would record a QT movie playing on my Mac screen with both audio and video?
    I have used Ambrosia's Snapz Pro X ($69) for years, but they are currently upgrading their Kext (Kernel Extension) software for changes inroduced by the Lion release so it might not be your best bet at this time. I also use ScreenFlow but it is a combination capture and editing utility which runs $99 and may include more features than you may need or will use. Have also tried Screenflick ($29) which, to some extent, appears to have a functionality somewhere between that of Snapz Pro X and ScreenFlow. It is a bit more complicated to set up but for the price might be the best bargin at this point. All three can capture the entire screen or a portion thereof, with or without mic/line and/or system audio. (Or at least they all will as soon as Ambrosia updates its Kext routine.)
    Here is a URL link posted by QTKirk three days ago to an article that recaps of a number of currently available third-party screen capture apps from around the world several of which may interest you: http://mac.appstorm.net/roundups/utilities-roundups/10-screen-recording-tools-fo r-mac/

  • What do I need to transfer video and audio from my 2009 Macbook to my television?

    I want to watch a movie with my family tonight, but the DVD is broken. I was planning on renting the movie online and transferring the video and audio from my Macbook to the television. What cables will I need to accomplish this? Also, does anyone know, were I to use a Windows instead, would transferring the audio be simpler? (And what would I need to do that?)

    Try doing it without a cable!
    Use AirDrop, described here:
    http://support.apple.com/kb/HT4783
    UPDATE - Oh, sorry, I see the article points out the MacBook is too old for AirDrop.
    Message was edited by: sberman

  • I need to connect Lightning to RCA componet for both Video and Audio

    I have an Ipad  2nd generation and use a 30 pin to RCA Componet adapter from rockfish and its work great for video and audio.  I now have a IPad mini 5 gen and I bought a lightning to 30 pin adapter and tried to use my Ipad mini to watch video and audio.  Audio works but video does not. Does anyone have a solution for this for the new Ipad Mini and iphone 5s.

    Nope.
    There is no lightning to RCA.
    The 30 pin adaptor clearly states it does not support video out.

  • Video and audio players will not show in Firefox. Players show in Safari and Chrome. (Mac computers). Do I need a plug-in?

    Tested on 3 apple mac computers:
    Mac Pro, Mini Mac and Macbook Pro.
    Each computer running Mountain Lion and Firefox 11.8.800.94
    Video and audio players not showing on website (video player is JWPlayer)
    Error on video player placeholder says 'No video with supported format and MIME type found'
    When the same site is access via either Chrome or Safari then the video and audio players show with all of the controls.

    You get this error if the video tag is used and not an object or embed tag that specifies a Flash player.<br />
    So this doesn't look like a problem with the Flash player as it is most likely not used in this case.<br />
    If there is fall back code to use a Flash player then it isn't working.
    Clear the cache and the cookies from websites that cause problems.
    "Clear the Cache":
    *Firefox > Preferences > Advanced > Network > Cached Web Content: "Clear Now"
    "Remove Cookies" from sites causing problems:
    *Firefox > Preferences > Privacy > Cookies: "Show Cookies"

  • Kichat: FAQ 3 - How do I get Video and Audio Chats with PCs ?

    Disclaimer: Apple does not necessarily endorse any suggestions, solutions, or third-party software products that may be mentioned in the topic below. Apple encourages you to first seek a solution at Apple Support. The following links are provided as is, with no guarantee of the effectiveness or reliability of the information. Apple does not guarantee that these links will be maintained or functional at any given time. Use the information below at your own discretion.
    How do I get Video and Audio Chats with PCs ? iChat FAQ 3 (Updated 3/4/2009)
    Applies to iChat 2.x, iChat 3.x and iChat 4.x to any version of AIM on a PC before AIM 6.1
    See bottom section on AIM 6.5 and 6.8 on XP and Vista.
    This piece is designed for those trying to connect Mac to PC for Video and Audio chats. Any iChat version Panther and up.
    Glossary For This FAQ
    This bit is designed for clarity.
    Video is the sending and /or receiving of pictures and sound.
    Audio is the sending and or receiving of sound only.
    One-Way is the ability to start either an Audio or Video chat from one end to a recipient who can not match your capabilities (or Vice Versa)
    What is needed
    At the Mac end
    A Mac running OS 10.3.x and iChat AV ver 2.1 or 10.4 plus iChat 3 or Leopard and iChat 4
    A DSL/Cable/Fibre (Broadband) connection of at least an up link speed of 256kbs.
    An AIM , @mac.com or MobileMe (@me.com) account name.
    (hosting Multiple person Mac to Mac AV chats requires higher specs and broadband uplink speed).
    At the PC end
    1 PC running windows XP (home or Pro). THIS A MUST
    The AIM Standalone Application, currently at ver. 5.9 at this link. AIM (the Site) now call this version Classic and it cannot be Installed On Vista
    Note: there is also Trillian which has a Pro version for $25 that can also Video and Audio chat. The Basic version just Texts and Audio Chats (AIM does not Audio chat)
    Some need the aimrtc12.exe file from Here Mostly Earlier than XP or Pre Service Pack 2 XP versions of Windows
    An AIM account/screen name (AOL or Netscape count as well)
    Service Pack 2 info. This info will allow the PC user to enable AIM thorough the XP Firewall. The Windows Firewall did not exist as such before this.
    Between both of you.
    At least one camera (Mac end works better)
    A sound input device (the camera, if it has one is ok)
    Your Buddies screen/account name in each others Buddy Lists
    Other tweaks
    For some people, using AIM on a PC, may also have to make sure their preferences (properties) are set in the AIM Buddy list, for their camera and /or Mic. (Tuning at Message 570)
    This is an icon button lower right on the Buddy List marked "Prefs" (AIM 5.5). This leads to the Preferences. Drop down the list until you read Live Video. Click on this. In the new window that opens click the button that says Tuning Video and Audio. Follow the instructions in the wizard that opens up. Access in AIM 5.9 for this is in the My AIM menu at the top of the Buddy list and then Options
    To Start
    You should now be able to chat to each other.
    If each of you has a camera it can be full Video , as described in the Glossary at the top.
    To start from the Mac end, select (highlight) your Buddy with one click. His camera icon should be dark. Click on the icon near his name or the one at the bottom of the Buddy List. (You do not have to start a text chat).
    To start from the PC end you need to start a text chat, then select the Video icon at the bottom of the chat window.
    If one of you has a camera and the other has a Mic then you will be able to video chat One Way but sound will be both ways.
    To start this type of chat from the Mac end you will have to go to the menu item "Buddies" and drop down to the item "Invite to One Way Video Chat"
    To start this from a PC follow the directions in the paragraph above. You may need to change the tab to the incoming Video at the back of the two to see the Video. These tabs are added when the Video chat starts and the front one normally states you do not have a camera and shows a connection to buy one.
    It is also possible to chat One Way if the other person does not have a Mic: replies will have to be typed in a Text chat.
    No Camera and No Mic will cause iChat to End the chat with "No Data Received for 10 Secs"
    Summary
    PC end gets AIM 5.9 or Trillian Pro.
    The PC end allows the app through the XP Firewall.
    AIM 5.9 needs "Tuning" to Camera and Mic.
    For any sort of sound to a PC using AIM, (Talk in PC or Audio in iChat) the Mac will need a camera. The other person can have a Mic and then live chats with sound both ways and Pictures (Video) One-Way.
    NOTE: At This Time It Is NOT Possible to Audio (sound only) between Mac & PC with AIM & iChat
    Trillian Basic can Audio. Trillian Pro can Video and has a bigger picture and can do Full Screen.
    Another explanation of the set up can be found Here about AIM 5.5 but is transferable to AIM 5.9.
    And Also here
    My Web Pages particularly all of Page 12: What if your Girlfriend Lives a Long Way Away ? have more information.
    <hr>
    AIM 6.5 and 6.8 On Vista and XP
    AIM 5.9 or earlier can not be installed on Vista.
    AIM 6.5 and 6.8 use a new video codec with a description of "Real Time IM"
    AIM have an FAQ page about this
    Below the pics is this quote
    What do I need to use Real-Time IM?
    You and your buddy need to be using AIM® 6.8 or higher to use Real-Time IM. Unfortunately, Real-Time IM does not yet work with older AIM clients, iChat®, or AIM® for Mac®.
    See items 5 through 13 on this page for alternatives including Web Browser based ones.
    I may receive some form of compensation, financial or otherwise, from my recommendation or link.
    This is the 2nd version of this tip. It was submitted on Saturday; April 4, 2009, 9:52 PM by Ralph Jonhs (UK).
    Do you want to provide feedback on this User Contributed Tip or contribute your own? If you have achieved Level 2 status, visit the User Tips Library Contributions forum for more information.

    This is the one I have been wating for
    http://discussions.apple.com/thread.jspa?threadID=406152
    kichat: Look and sound great in iChat!
    Ian's First FAQ
    Also New Today
    http://discussions.apple.com/thread.jspa?threadID=121775
    kichat: FAQ 2 - How to get my router to work with iChat?
    And
    http://discussions.apple.com/thread.jspa?threadID=121665
    kichat: FAQ 1 - What do I need to start in iChat ?
    11:20 PM Thursday; March 16, 2006

  • Embedding video and audio for internet flipbook

    Dear All,
    first of all, sorry if it's been asked before but I could not find direct answer.
    My company, small translation agency in Poland, plans on to buy InDesign to improve quality of our output documents, but we have one more feature in mind and we don't know if InDesign CS6 supports this.
    In a movie http://tv.adobe.com/watch/cs55-design-standard-feature-tour/create-more-compelling-ebooks- with-indesign-cs55/ Terry White presents how to make an eBook with embedded video. We need a solution to create a similar effect, but the final document would be accessible from WWW (eg. http://essentialabsurdities.com/dance/ - there is no video in the example) - we want people to be able to browse content like in a book (flipbook?) and access video and audio (embedded or stored on a serwer along the document) when needed.
    Does InDesign support this? What should be the final format of such a document? Interactive PDF? SWF? Everybody says Flash is going to be retired soon (Apple does not support it, Android devices are soon to follow, the same for PCs in the nearest future probably) so we do not want to use this.
    Many thanks for your opinions on the issue.
    Best wishes,
    Michal Kornacki

    I have no incoming video for my Jabber account. I was doing some testing for one of my customers who had this issue. Here is what I found. I have a EX90 registered to VCS on a corporate network. I have my Jabber Express client I downloaded and installed. When I call to or from either I don't receive video on Jabber Express but I get audio from the EX90. I get Audio and video on the EX90 from Jabber. What I found when I was troubleshooting is that if you leave the call up for 30 seconds I finally start recieving video on Jabber from the EX90. After testing a few calls this happened every time. I then checked the call settings on both sides during the call. Both endpoints are experiencing 50% or so packet loss until the video started being sent to Jabber and then the packet loss dropped to 0. So I would assume there is something wrong on the Jabber Express end that is causing a 30 second or so delay when the video is being sent through the proxy. Has anyone else had this exact issue?

  • HT1583 When I render my project in IDVD, video and audio runs properly, but when I burn it in professional quality and burning is finished there was no audio on the last two chapters, one audio is attached to the clip and the other one is from itunes, pls

    Hi, please help me When I render my project in IDVD, video and audio runs properly, but when I burn it in professional quality and burning is finished there was no audio on the last two chapters, one audio is attached to the clip and the other one is from itunes, pls help

    Hi
    My first two thoughts
    • Shared to Media Browser - BUT as Large or HD - try Medium !
    • audio from iTunes - use to go silent
    - in iTunes
    - Create a new PlayList with needed audio
    - BURN this as a standard Audio-CD (.aiff) - NOT .mp3
    - use the files on this CD in Your Movie project - I ALWAYS DO - and only use .aiff ever - never .mp3'
    My notes on this:
    No audio on DVD disc.
    Most common origin. 
    1. Imported audio from iTunes.
    • In iTunes copy out as an Audio-CD .aiff (Same as played on standard Stereo CD - no .mp3)
    • Use this in Your movie project
    2. Low - Free Space on Start-up/Boot/Internal/Mac OS Hard disk makes it hard for iMovie to work as intended.
    Down to 1.3 GB and it doesn’t work - especially audio don’t migrate over to Media Browser
    (iM’08 & 09)
    3. Material in iMovie’08 & 09 - Shared to Media Browser and here selected as Large
    large.m4v. It silenced out this project in iDVD. By making a slight alteration - provoking it to ask for a new Share/Publish to Media Browser and here selecting 640x480 - and audio was back when a new iDVD project was created including this movie.
    Minuscular - - 176x144
    Mobile - - - - - 480x360
    Medium - - - - 640x480
    Large - - - - - - 720x540    960x540
    HD - - - - - - - - 1280x720
    4. Strange audio formats like .mp3, .avi etc.
    • Change them to .aiff. Use an audio editor like Audacity (free)
    5. Main audio is set to off in System Preferences - Does this by it self - Don’t know why
    Cheque Audio-Out resp. Audio-In
    6. Ed Hanna
    Had the same problem; some Googling around gave me a kludgy, but effective fix
    Downgrade Perian from recent versions back to version 1.0.
    That worked for me, and so far I haven't encountered any deficiencies — except it takes more advanced versions of Perian to enable QuickTime to handle subtitles in .srt format — that I have noticed.
    7. GarageBand fix.
    In this set audio to 44.1 kHz (Klaus1 suggestion)
    (if this don’t work try 48 kHz - me guessing)
    Before burning the DVD.
    • Do a DiskImage (File menu and down)
    • Double click on the .img file
    • Test it with Apple DVD-player
    If it’s OK then make Your DVD.
    Burn at x1 speed.... (or x4)
    • In iDVD 08 - or - 09
    • Burn from DiskImage with Apple’s Disk Utilities application
    • OR burn with Roxio Toast™ if You got it
    Yours Bengt W

  • Sync of Video and Audio streams

    I got a main project to make a video conferance system. And i'm not sure how to sync the video and Audio streams. (Audio need to have higher priority than video)
    Video is all moust real-time but audio is around 0.5 sec delay at the fastest.
    I realy need to find out how to sync them since its one of my main subjects in the project.
    So if anyone know how to, plz let me know.

    Hello,
    I try to implement a videoconference in Java with JMF. At the reception, audio and vid�o aren't synchronizing. I'm looking for a solution to resolve this problem because i think in this kind of application, audio and video tracks must be synchronized. I'd like to know when and how can i do the synchronization : at the capture, before transmission, or at the reception ?

  • Update to kichat: FAQ 3 - How do I get Video and Audio Chats with PCs ?

    kichat: FAQ 3 - How do I get Video and Audio Chats with PCs ?
    (To Replace http://discussions.apple.com/thread.jspa?threadID=406147 if Accepted. )
    How do I get Video and Audio Chats with PCs ? iChat FAQ 3 (Updated 7/12/2008)
    Applies to iChat 2.x, iChat 3.x and iChat 4.x to any version of AIM on a PC before AIM 6.1
    This piece is designed for those trying to connect Mac to PC for Video and Audio chats. Any iChat version Panther and up.
    Glossary For This FAQ
    This bit is designed for clarity.
    Video is the sending and /or recieving of pictures and sound.
    Audio is the sending and or receiving of sound only.
    One-Way is the ablity to start either an Audio or Video chat from one end to a receipient who can not match your capabilities (or Vice Versa)
    What is needed
    At the Mac end
    A Mac running OS 10.3.x and iChat AV ver 2.1 or 10.4 plus iChat 3 or Leopard and iChat 4
    A DSL/Cable/Fibre (Broadband) connection of at least an up link speed of 256kbs.
    An AIM , @mac.com or MobileMe (@me.com) account name.
    (hosting Multiple person Mac to Mac AV chats requires higher specs and broadband uplink speed).
    At the PC end
    1 PC running windows XP (home or Pro). THIS A MUST
    The AIM Standalone Application, currently at ver. 5.9 at this link. AIM (the Site) now call this version Classic and it cannot be Installed On Vista
    Note: there is also Trillian which has a Pro version for $25 that can also Video and Audio chat. The Basic version just Texts and Audio Chats (AIM does not Audio chat)
    Some need the aimrtc12.exe file from Here Mostly Earlier than XP or Pre Service Pack 2 XP versions of Windows
    Note: It has been noted that this file is now apparently included in Windows XP after Service Pack 2 and above.
    An AIM account/screen name (AOL or Netscape count as well)
    Service Pack 2 info. This info will allow the PC user to enable AIM thorough the XP Firewall. The Windows Firewall did not exist as such before this
    Between both of you.
    At least one camera (Mac end)
    A sound input device (the camera, if it has one is ok)
    Your Buddies screen/account name in each others Buddy Lists
    Other tweaks
    For some people, using AIM on a PC, may also have to make sure their preferences (properties) are set in the AIM Buddy list, for their camera and /or Mic. (Tuning at Message 570)
    This is an icon button lower right on the Buddy List marked "Prefs" (AIM 5.5). This leads to the Preferences. Drop down the list until you read Live Video. Click on this. In the new window that opens click the button that says Tuning Video and Audio. Follow the instructions in the wizard that opens up. Access in AIM 5.9 for this is in the My AIM menu at the top of the Buddy list and then Options
    To Start
    You should now be able to chat to each other.
    If each of you has a camera it can be full Video , as described in the Glossary at the top.
    To start from the Mac end, select (highlight) your Buddy with one click. His camera icon should be dark. Click on the icon near his name or the one at the bottom of the Buddy List. (You do not have to start a text chat).
    To start from the PC end you need to start a text chat, then select the Video icon at the bottom of the chat window.
    If one of you has a camera and the other has a Mic then you will be able to chat One Way but have sound will be both ways.
    To start this type of chat from the Mac end you will have to go to the menu item "Buddies" and drop down to the item "Invite to One Way Video Chat"
    To start this from a PC follow the directions in the pargraph above. You may need to change the tab to the incoming Video at the back of the two to see the Video. These tabs are added when the Video chat starts and the front one normally states you do not have a camera and shows a connection to buy one.
    It is also possible to chat One Way if the other person does not have a Mic: replies will have to be typed in a Text chat.
    No Camera and No Mic will cause iChat to End the chat with "No Data Received for 10 Secs"
    Summary
    For any sort of sound to a PC using AIM, (Talk in PC or Audio in iChat) the Mac will need a camera. The other person can have a Mic and then live chats with sound both ways and Pictures (Video) the other.
    NOTE: At This Time It Is NOT Possible to Audio (sound only) between Mac & PC with AIM & iChat
    Trillian Basic can Audio. Trillian Pro can Video and has a bigger picture and can do Full Screen.
    Another explanation of the set up can be found Here about AIM 5.5 but is transferable.
    And Also here
    My Web Pages particularly all of Page 12: What if your Girlfriend Lives a Long Way Away ? have more information.
    I may receive some form of compensation, financial or otherwise, from my recommendation or link.
    4:24 PM Sunday; December 7, 2008

    kichat: FAQ 3 - How do I get Video and Audio Chats with PCs ?
    (To Replace http://discussions.apple.com/thread.jspa?threadID=406147 if Accepted. )
    How do I get Video and Audio Chats with PCs ? iChat FAQ 3 (Updated 7/12/2008)
    Applies to iChat 2.x, iChat 3.x and iChat 4.x to any version of AIM on a PC before AIM 6.1
    This piece is designed for those trying to connect Mac to PC for Video and Audio chats. Any iChat version Panther and up.
    Glossary For This FAQ
    This bit is designed for clarity.
    Video is the sending and /or recieving of pictures and sound.
    Audio is the sending and or receiving of sound only.
    One-Way is the ablity to start either an Audio or Video chat from one end to a receipient who can not match your capabilities (or Vice Versa)
    What is needed
    At the Mac end
    A Mac running OS 10.3.x and iChat AV ver 2.1 or 10.4 plus iChat 3 or Leopard and iChat 4
    A DSL/Cable/Fibre (Broadband) connection of at least an up link speed of 256kbs.
    An AIM , @mac.com or MobileMe (@me.com) account name.
    (hosting Multiple person Mac to Mac AV chats requires higher specs and broadband uplink speed).
    At the PC end
    1 PC running windows XP (home or Pro). THIS A MUST
    The AIM Standalone Application, currently at ver. 5.9 at this link. AIM (the Site) now call this version Classic and it cannot be Installed On Vista
    Note: there is also Trillian which has a Pro version for $25 that can also Video and Audio chat. The Basic version just Texts and Audio Chats (AIM does not Audio chat)
    Some need the aimrtc12.exe file from Here Mostly Earlier than XP or Pre Service Pack 2 XP versions of Windows
    Note: It has been noted that this file is now just another link to the Standalone application. This might be an error by AIM or a newer version that includes the file.
    An AIM account/screen name (AOL or Netscape count as well)
    Service Pack 2 info. This info will allow the PC user to enable AIM thorough the XP Firewall. The Windows Firewall did not exist as such before this
    Between both of you.
    At least one camera (Mac end)
    A sound input device (the camera, if it has one is ok)
    Your Buddies screen/account name in each others Buddy Lists
    Other tweaks
    For some people, using AIM on a PC, may also have to make sure their preferences (properties) are set in the AIM Buddy list, for their camera and /or Mic. (Tuning at Message 570)
    This is an icon button lower right on the Buddy List marked "Prefs" (AIM 5.5). This leads to the Preferences. Drop down the list until you read Live Video. Click on this. In the new window that opens click the button that says Tuning Video and Audio. Follow the instructions in the wizard that opens up. Access in AIM 5.9 for this is in the My AIM menu at the top of the Buddy list and then Options
    To Start
    You should now be able to chat to each other.
    If each of you has a camera it can be full Video , as described in the Glossary at the top.
    To start from the Mac end, select (highlight) your Buddy with one click. His camera icon should be dark. Click on the icon near his name or the one at the bottom of the Buddy List. (You do not have to start a text chat).
    To start from the PC end you need to start a text chat, then select the Video icon at the bottom of the chat window.
    If one of you has a camera and the other has a Mic then you will be able to chat One Way but have sound will be both ways.
    To start this type of chat from the Mac end you will have to go to the menu item "Buddies" and drop down to the item "Invite to One Way Video Chat"
    To start this from a PC follow the directions in the pargraph above. You may need to change the tab to the incoming Video at the back of the two to see the Video. These tabs are added when the Video chat starts and the front one normally states you do not have a camera and shows a connection to buy one.
    It is also possible to chat One Way if the other person does not have a Mic: replies will have to be typed in a Text chat.
    No Camera and No Mic will cause iChat to End the chat with "No Data Received for 10 Secs"
    Summary
    For any sort of sound to a PC using AIM, (Talk in PC or Audio in iChat) the Mac will need a camera. The other person can have a Mic and then live chats with sound both ways and Pictures (Video) the other.
    NOTE: At This Time It Is NOT Possible to Audio (sound only) between Mac & PC with AIM & iChat
    Trillian Basic can Audio. Trillian Pro can Video and has a bigger picture and can do Full Screen.
    Another explanation of the set up can be found Here about AIM 5.5 but is transferable.
    And Also here
    My Web Pages particularly all of Page 12: What if your Girlfriend Lives a Long Way Away ? have more information.
    I may receive some form of compensation, financial or otherwise, from my recommendation or link.
    9:19 PM Friday; December 12, 2008

Maybe you are looking for

  • Can't launch Hyperion Configuration Tool

    I am installing Hyperion Shared Services 9.2.1 in AIX 5.3 After SS installation, the installer asks about to launch the Configuration Utility to complete the installation, activation and configuration. i am using Xterm in order to see a GUI for insta

  • BAdi for fetching Time Writing hours

    Hi all, I want to know is there any BAdi available for fetching approved Time Writing Hours. I came to know about one BAdi -> BADI CATS_APPROVAL  where i could not find the appropriate method. Please help me. Thanks in advance. Regards, Kani.

  • Deleted "High Ratings" playlist, how do I add back

    I know how to add playlists, but the high ratings playlist will update the list on the fly. I deleted that playlist (dont ask why) and now want to add it back in with the same functionality. Any one know how without having to hit re-store?

  • Checkbox with javascript unexpectedly unchecks other checkboxs

    Hi, I have a checkbox called applicant_isemailaddress which has onchange javascript if (this.rawValue) {Page1.doYouEmail.presence = "visible";Page1.applicant_allEmailAddresses.presence = "visible";}else {Page1.doYouEmail.presence = "hidden";Page1.app

  • About application module

    Hi, I want to call executeWithParams method in one of application modules view object.. what is the syntax?