Need a suggestion to repair a troublesome Nano
A co-worker of mine asked me to look at her Nano for her - being the sucker that I am, I agreed - 'because it won't turn on' as she put it. It's an iPod Nano (2GB Black) purchased around 4 months ago.
OK, the symptoms are these: When it is plugged in to a computer it shows the apple logo, then a battery about 1/4 full with a lightning bolt. The battery icon flickers every five seconds or so, but never changes. This is where it stays. I've had it here next to me plugged in for about an hour and a half so far. When it is unplugged the icon gets distorted and eventually fades, and the ipod is unresponsive.
This is where it gets weird. I looked up how to reset it and did so. Once it resets it goes right back to the same screen as before. So i tried disk only mode. When I try this I see the 'do not disconnect' screen for about a second, then it resets itself and goes back to the charging battery again. I even held the buttons to enter disk mode, and it seems to loop while I hold them, resetting and trying to enter disk mode, returning to the battery once I release.
I can't even attempt a restore because the system doesn't see it. Neither the Finder, nor iTunes, nor even disk utility.
With that long-winded description out of the way, my question is this: Does anyone have any other suggestions for me to try before I simply tell her to get it repaired/replaced? Any help would be appreciated.
See these.
iPod won't turn on.
iPod battery doesn't charge.
iPod doesn't appear in iTunes or on the Mac desktop
iPod does not appear in iPod Updater or iTunes in Mac OS X.
To be honest it sounds as if this iPod needs service.
You can arrange online service here.
Service request.</a
Similar Messages
-
I purchased my iphone 4s from US, my lock button is not working, I need to get it repaired in India. Please suggest
There is nothing you can do except take it back to the US. The warranty is not international and no authorized service center will touch your US phone in India.
-
Need a suggestion for change in cv02n tcode
Hi all,
Need a suggestion to update the additional tab / classification in cv02n transaction.
I want to update the charecterstics(custom) in the additional tab(and also in classification tab).
Thanks & regards
PavanHi all,
Found solution -
I installed Lion online and i ran disk repair and found that i needed to do a repair but i have no start up disk. How do i repair without burning a disk?
Lion creates a Recovery partition on your harddrive. You will need to boot from startup.
click here
http://support.apple.com/kb/HT4718 -
Query performance tuning need your suggestions
Hi,
Below is the sql query and explain plan which is taking 2 hours to execute and sometime it is breaking up( erroring out) due to memory issue.
Below it the query which i need to improve the performance of the code please need your suggestion in order to tweak so that time take for execution become less and also in less memory consumption
select a11.DATE_ID DATE_ID,
sum(a11.C_MEASURE) WJXBFS1,
count(a11.PKEY_GUID) WJXBFS2,
count(Case when a11.C_MEASURE <= 10 then a11.PKEY_GUID END) WJXBFS3,
count(Case when a11.STATUS = 'Y' and a11.C_MEASURE > 10 then a11.PKEY_GUID END) WJXBFS4,
count(Case when a11.STATUS = 'N' then a11.PKEY_GUID END) WJXBFS5,
sum(((a11.C_MEASURE ))) WJXBFS6,
a17.DESC_DATE_MM_DD_YYYY DESC_DATE_MM_DD_YYYY,
a11.DNS DNS,
a12.VVALUE VVALUE,
a12.VNAME VNAME,
a13.VVALUE VVALUE0,
a13.VNAME VNAME0,
9 a14.VVALUE VVALUE1,
a14.VNAME VNAME1,
a15.VVALUE VVALUE2,
a15.VNAME VNAME2,
a16.VVALUE VVALUE3,
a16.VNAME VNAME3,
a11.PKEY_GUID PKEY_GUID,
a11.UPKEY_GUID UPKEY_GUID,
a17.DAY_OF_WEEK DAY_OF_WEEK,
a17.D_WEEK D_WEEK,
a17.MNTH_ID DAY_OF_MONTH,
a17.YEAR_ID YEAR_ID,
a17.DESC_YEAR_FULL DESC_YEAR_FULL,
a17.WEEK_ID WEEK_ID,
a17.WEEK_OF_YEAR WEEK_OF_YEAR
from ACTIVITY_F a11
join (SELECT A.ORG as ORG,
A.DATE_ID as DATE_ID,
A.TIME_OF_DAY_ID as TIME_OF_DAY_ID,
A.DATE_HOUR_ID as DATE_HOUR_ID,
A.TASK as TASK,
A.PKEY_GUID as PKEY_GUID,
A.VNAME as VNAME,
A.VVALUE as VVALUE
FROM W_ORG_D A join W_PERSON_D B on
(A.TASK = B.TASK AND A.ORG = B.ID
AND A.VNAME = B.VNAME)
WHERE B.VARIABLE_OBJ = 1 ) a12
on (a11.PKEY_GUID = a12.PKEY_GUID and
a11.DATE_ID = a12.DATE_ID and
a11.ORG = a12.ORG)
join (SELECT A.ORG as ORG,
A.DATE_ID as DATE_ID,
A.TIME_OF_DAY_ID as TIME_OF_DAY_ID,
A.DATE_HOUR_ID as DATE_HOUR_ID,
A.TASK as TASK,
A.PKEY_GUID as PKEY_GUID,
A.VNAME as VNAME,
A.VVALUE as VVALUE
FROM W_ORG_D A join W_PERSON_D B on
(A.TASK = B.TASK AND A.ORG = B.ID
AND A.VNAME = B.VNAME)
WHERE B.VARIABLE_OBJ = 2) a13
on (a11.PKEY_GUID = a13.PKEY_GUID and
a11.DATE_ID = a13.DATE_ID and
a11.ORG = a13.ORG)
join (SELECT A.ORG as ORG,
A.DATE_ID as DATE_ID,
A.TIME_OF_DAY_ID as TIME_OF_DAY_ID,
A.DATE_HOUR_ID as DATE_HOUR_ID,
A.TASK as TASK,
A.PKEY_GUID as PKEY_GUID,
A.VNAME as VNAME,
A.VVALUE as VVALUE
FROM W_ORG_D A join W_PERSON_D B on
(A.TASK = B.TASK AND A.ORG = B.ID
AND A.VNAME = B.VNAME)
WHERE B.VARIABLE_OBJ = 3 ) a14
on (a11.PKEY_GUID = a14.PKEY_GUID and
a11.DATE_ID = a14.DATE_ID and
a11.ORG = a14.ORG)
join (SELECT A.ORG as ORG,
A.DATE_ID as DATE_ID,
A.TIME_OF_DAY_ID as TIME_OF_DAY_ID,
A.DATE_HOUR_ID as DATE_HOUR_ID,
A.TASK as TASK,
A.PKEY_GUID as PKEY_GUID,
A.VNAME as VNAME,
A.VVALUE as VVALUE
FROM W_ORG_D A join W_PERSON_D B on
(A.TASK = B.TASK AND A.ORG = B.ID
AND A.VNAME = B.VNAME)
WHERE B.VARIABLE_OBJ = 4) a15
on (a11.PKEY_GUID = a15.PKEY_GUID and
89 a11.DATE_ID = a15.DATE_ID and
a11.ORG = a15.ORG)
join (SELECT A.ORG as ORG,
A.DATE_ID as DATE_ID,
A.TIME_OF_DAY_ID as TIME_OF_DAY_ID,
A.DATE_HOUR_ID as DATE_HOUR_ID,
A.TASK as TASK,
A.PKEY_GUID as PKEY_GUID,
A.VNAME as VNAME,
A.VVALUE as VVALUE
FROM W_ORG_D A join W_PERSON_D B on
(A.TASK = B.TASK AND A.ORG = B.ID
AND A.VNAME = B.VNAME)
WHERE B.VARIABLE_OBJ = 9) a16
on (a11.PKEY_GUID = a16.PKEY_GUID and
a11.DATE_ID = a16.DATE_ID and
A11.ORG = A16.ORG)
join W_DATE_D a17
ON (A11.DATE_ID = A17.ID)
join W_SALES_D a18
on (a11.TASK = a18.ID)
where (a17.TIMSTAMP between To_Date('2001-02-24 00:00:00', 'YYYY-MM-DD HH24:MI:SS') and To_Date('2002-09-12 00:00:00', 'YYYY-MM-DD HH24:MI:SS')
and a11.ORG in (12)
and a18.SRC_TASK = 'AX012Z')
group by a11.DATE_ID,
a17.DESC_DATE_MM_DD_YYYY,
a11.DNS,
a12.VVALUE,
a12.VNAME,
a13.VVALUE,
a13.VNAME,
a14.VVALUE,
a14.VNAME,
a15.VVALUE,
a15.VNAME,
a16.VVALUE,
a16.VNAME,
a11.PKEY_GUID,
a11.UPKEY_GUID,
a17.DAY_OF_WEEK,
a17.D_WEEK,
a17.MNTH_ID,
a17.YEAR_ID,
a17.DESC_YEAR_FULL,
a17.WEEK_ID,
a17.WEEK_OF_YEAR;
Explained.
PLAN_TABLE_OUTPUT
| Id | Operation | Name | Rows | Bytes | Cost (%CPU)| Time |
| 0 | SELECT STATEMENT | | 1 | 1245 | 47 (9)| 00:00:01 |
| 1 | HASH GROUP BY | | 1 | 1245 | 47 (9)| 00:00:01 |
|* 2 | HASH JOIN | | 1 | 1245 | 46 (7)| 00:00:01 |
|* 3 | HASH JOIN | | 1 | 1179 | 41 (5)| 00:00:01 |
|* 4 | HASH JOIN | | 1 | 1113 | 37 (6)| 00:00:01 |
|* 5 | HASH JOIN | | 1 | 1047 | 32 (4)| 00:00:01 |
|* 6 | HASH JOIN | | 1 | 981 | 28 (4)| 00:00:01 |
| 7 | NESTED LOOPS | | 1 | 915 | 23 (0)| 00:00:01 |
| 8 | NESTED LOOPS | | 1 | 763 | 20 (0)| 00:00:01 |
| 9 | NESTED LOOPS | | 1 | 611 | 17 (0)| 00:00:01 |
| 10 | NESTED LOOPS | | 1 | 459 | 14 (0)| 00:00:01 |
| 11 | NESTED LOOPS | | 1 | 307 | 11 (0)| 00:00:01 |
| 12 | NESTED LOOPS | | 1 | 155 | 7 (0)| 00:00:01 |
| 13 | NESTED LOOPS | | 1 | 72 | 3 (0)| 00:00:01 |
| 14 | TABLE ACCESS BY INDEX ROWID| W_SALES_D | 1 | 13 | 2 (0)| 00:00:01 |
|* 15 | INDEX UNIQUE SCAN | CONS_UNQ_W_SALES_D_SRC_ID | 1 | | 1 (0)| 00:00:01 |
| 16 | TABLE ACCESS BY INDEX ROWID| W_DATE_D | 1 | 59 | 1 (0)| 00:00:01 |
|* 17 | INDEX UNIQUE SCAN | UIDX_DD_TIMSTAMP | 1 | | 0 (0)| 00:00:01 |
| 18 | TABLE ACCESS BY INDEX ROWID | ACTIVITY_F | 1 | 83 | 4 (0)| 00:00:01 |
|* 19 | INDEX RANGE SCAN | PK_ACTIVITY_F | 1 | | 3 (0)| 00:00:01 |
|* 20 | TABLE ACCESS BY INDEX ROWID | W_ORG_D | 1 | 152 | 4 (0)| 00:00:01 |
|* 21 | INDEX RANGE SCAN | IDX_FK_CVSF_PKEY_GUID | 10 | | 3 (0)| 00:00:01 |
|* 22 | TABLE ACCESS BY INDEX ROWID | W_ORG_D | 1 | 152 | 3 (0)| 00:00:01 |
|* 23 | INDEX RANGE SCAN | IDX_FK_CVSF_PKEY_GUID | 10 | | 3 (0)| 00:00:01 |
|* 24 | TABLE ACCESS BY INDEX ROWID | W_ORG_D | 1 | 152 | 3 (0)| 00:00:01 |
|* 25 | INDEX RANGE SCAN | IDX_FK_CVSF_PKEY_GUID | 10 | | 3 (0)| 00:00:01 |
|* 26 | TABLE ACCESS BY INDEX ROWID | W_ORG_D | 1 | 152 | 3 (0)| 00:00:01 |
|* 27 | INDEX RANGE SCAN | IDX_FK_CVSF_PKEY_GUID | 10 | | 3 (0)| 00:00:01 |
|* 28 | TABLE ACCESS BY INDEX ROWID | W_ORG_D | 1 | 152 | 3 (0)| 00:00:01 |
|* 29 | INDEX RANGE SCAN | IDX_FK_CVSF_PKEY_GUID | 10 | | 3 (0)| 00:00:01 |
|* 30 | TABLE ACCESS FULL | W_PERSON_D | 1 | 66 | 4 (0)| 00:00:01 |
|* 31 | TABLE ACCESS FULL | W_PERSON_D | 1 | 66 | 4 (0)| 00:00:01 |
|* 32 | TABLE ACCESS FULL | W_PERSON_D | 1 | 66 | 4 (0)| 00:00:01 |
|* 33 | TABLE ACCESS FULL | W_PERSON_D | 1 | 66 | 4 (0)| 00:00:01 |
|* 34 | TABLE ACCESS FULL | W_PERSON_D | 1 | 66 | 4 (0)| 00:00:01 |
-----------------------------------------------------------------------------------------------------------------------Hi,
I'm not a tuning expert but I can suggest you to post your request according to this template:
Thread: HOW TO: Post a SQL statement tuning request - template posting
HOW TO: Post a SQL statement tuning request - template posting
Then:
a) you should posting a code which is easy to read. What about formatting? Your code had to be fixed in a couple of lines.
b) You could simplify your code using the with statement. This has nothing to do with the tuning but it will help the readability of the query.
Check it below:
WITH tab1 AS (SELECT a.org AS org
, a.date_id AS date_id
, a.time_of_day_id AS time_of_day_id
, a.date_hour_id AS date_hour_id
, a.task AS task
, a.pkey_guid AS pkey_guid
, a.vname AS vname
, a.vvalue AS vvalue
, b.variable_obj
FROM w_org_d a
JOIN
w_person_d b
ON ( a.task = b.task
AND a.org = b.id
AND a.vname = b.vname))
SELECT a11.date_id date_id
, SUM (a11.c_measure) wjxbfs1
, COUNT (a11.pkey_guid) wjxbfs2
, COUNT (CASE WHEN a11.c_measure <= 10 THEN a11.pkey_guid END) wjxbfs3
, COUNT (CASE WHEN a11.status = 'Y' AND a11.c_measure > 10 THEN a11.pkey_guid END) wjxbfs4
, COUNT (CASE WHEN a11.status = 'N' THEN a11.pkey_guid END) wjxbfs5
, SUM ( ( (a11.c_measure))) wjxbfs6
, a17.desc_date_mm_dd_yyyy desc_date_mm_dd_yyyy
, a11.dns dns
, a12.vvalue vvalue
, a12.vname vname
, a13.vvalue vvalue0
, a13.vname vname0
, a14.vvalue vvalue1
, a14.vname vname1
, a15.vvalue vvalue2
, a15.vname vname2
, a16.vvalue vvalue3
, a16.vname vname3
, a11.pkey_guid pkey_guid
, a11.upkey_guid upkey_guid
, a17.day_of_week day_of_week
, a17.d_week d_week
, a17.mnth_id day_of_month
, a17.year_id year_id
, a17.desc_year_full desc_year_full
, a17.week_id week_id
, a17.week_of_year week_of_year
FROM activity_f a11
JOIN tab1 a12
ON ( a11.pkey_guid = a12.pkey_guid
AND a11.date_id = a12.date_id
AND a11.org = a12.org
AND a12.variable_obj = 1)
JOIN tab1 a13
ON ( a11.pkey_guid = a13.pkey_guid
AND a11.date_id = a13.date_id
AND a11.org = a13.org
AND a13.variable_obj = 2)
JOIN tab1 a14
ON ( a11.pkey_guid = a14.pkey_guid
AND a11.date_id = a14.date_id
AND a11.org = a14.org
AND a14.variable_obj = 3)
JOIN tab1 a15
ON ( a11.pkey_guid = a15.pkey_guid
AND a11.date_id = a15.date_id
AND a11.org = a15.org
AND a15.variable_obj = 4)
JOIN tab1 a16
ON ( a11.pkey_guid = a16.pkey_guid
AND a11.date_id = a16.date_id
AND a11.org = a16.org
AND a16.variable_obj = 9)
JOIN w_date_d a17
ON (a11.date_id = a17.id)
JOIN w_sales_d a18
ON (a11.task = a18.id)
WHERE (a17.timstamp BETWEEN TO_DATE ('2001-02-24 00:00:00', 'YYYY-MM-DD HH24:MI:SS')
AND TO_DATE ('2002-09-12 00:00:00', 'YYYY-MM-DD HH24:MI:SS')
AND a11.org IN (12)
AND a18.src_task = 'AX012Z')
GROUP BY a11.date_id, a17.desc_date_mm_dd_yyyy, a11.dns, a12.vvalue
, a12.vname, a13.vvalue, a13.vname, a14.vvalue
, a14.vname, a15.vvalue, a15.vname, a16.vvalue
, a16.vname, a11.pkey_guid, a11.upkey_guid, a17.day_of_week
, a17.d_week, a17.mnth_id, a17.year_id, a17.desc_year_full
, a17.week_id, a17.week_of_year;
{code}
I hope I did not miss anything while reformatting the code. I could not test it not having the proper tables.
As I said before I'm not a tuning expert nor I pretend to be but I see this:
1) Table W_PERSON_D is read in full scan. Any possibility of using indexes?
2) Tables W_SALES_D, W_DATE_D, ACTIVITY_F and W_ORG_D have TABLE ACCESS BY INDEX ROWID which definitely is not fast.
You should provide additional information for tuning your query checking the post I mentioned previously.
Regards.
Al -
Tune the SQL Query need a Suggestion
Hi,
There is a view created which takes 17seconds to execute the query, When i split the query and execute each query takes .15 seconds to execute. Below it the query which i need to improve the performance of the code please need your suggestion in order to tweek so that time take for execution become less
SELECT 'Parature' "Source",
NULL "Distibutor",
reseller_name "Reseller",
NULL "Reseller City",
NULL "Reseller State",
A.Country "Reseller Country",
DECODE (a.state, 'APAC', 'APAC', 'EMEA', 'EMEA', NULL, 'Unknown', 'US' ) "Reseller Theater",
NULL "Customer Name",
NULL "Customer City",
NULL "Customer State",
NULL "Customer Country",
NULL "Customer Theater",
NULL "Sales Book Date",
NULL "Ship Date",
c.sales_order_number "Sales Order Number",
C.Po_Number "PO Number",
controller_model_number_1 "Product Name",
TRIM (UPPER (serial_number_1)) "Product Serial Number",
c.contract_id "Contract ID",
product_name "Support Name",
TO_DATE (c.contract_purchase_date) "Start Date",
TO_DATE (c.contract_expiration_date) "Expire Date",
NULL "Header Status",
NULL "Line Status",
NULL "Line Type",
NULL "Termination Reason",
NULL "Location_id",
NULL "Product_id"
FROM edb_assets c,
edb_accounts a
WHERE controller_model_number_1 != 'NULL'
AND Serial_Number_1 != 'NULL'
AND C.Amid = A.Amid(+)
UNION
SELECT 'Parature' "Source",
NULL "Distibutor",
reseller_name "Reseller",
NULL "Reseller City",
NULL "Reseller State",
A.Country "Reseller Country",
DECODE (a.state, 'APAC', 'APAC', 'EMEA', 'EMEA', NULL, 'Unknown', 'US' ) "Reseller Theater",
NULL "Customer Name",
NULL "Customer City",
NULL "Customer State",
NULL "Customer Country",
NULL "Customer Theater",
NULL "Sales Book Date",
NULL "Ship Date",
c.sales_order_number "Sales Order Number",
C.Po_Number "PO Number",
controller_model_number_2 "Product Name",
TRIM (UPPER (serial_number_2)) "Product Serial Number",
c.contract_id "Contract ID",
product_name "Support Name",
TO_DATE (c.contract_purchase_date) "Start Date",
TO_DATE (c.contract_expiration_date) "Expire Date",
NULL "Header Status",
NULL "Line Status",
NULL "Line Type",
NULL "Termination Reason",
NULL "Location_id",
NULL "Product_id"
FROM edb_assets c,
edb_accounts a
WHERE controller_model_number_2 != 'NULL'
AND serial_number_2 != 'NULL'
AND C.Amid = A.Amid(+)
UNION
SELECT 'Parature' "Source",
NULL "Distibutor",
reseller_name "Reseller",
NULL "Reseller City",
NULL "Reseller State",
A.Country "Reseller Country",
DECODE (a.state, 'APAC', 'APAC', 'EMEA', 'EMEA', NULL, 'Unknown', 'US' ) "Reseller Theater",
NULL "Customer Name",
NULL "Customer City",
NULL "Customer State",
NULL "Customer Country",
NULL "Customer Theater",
NULL "Sales Book Date",
NULL "Ship Date",
c.sales_order_number "Sales Order Number",
C.Po_Number "PO Number",
controller_model_number_3 "Product Name",
TRIM (UPPER (serial_number_3)) "Product Serial Number",
c.contract_id "Contract ID",
product_name "Support Name",
TO_DATE (c.contract_purchase_date) "Start Date",
TO_DATE (c.contract_expiration_date) "Expire Date",
NULL "Header Status",
NULL "Line Status",
NULL "Line Type",
NULL "Termination Reason",
NULL "Location_id",
NULL "Product_id"
FROM edb_assets c,
edb_accounts a
WHERE controller_model_number_3 != 'NULL'
AND serial_number_3 != 'NULL'
AND C.Amid = A.Amid(+)
UNION
SELECT 'Parature' "Source",
NULL "Distibutor",
reseller_name "Reseller",
NULL "Reseller City",
NULL "Reseller State",
A.Country "Reseller Country",
DECODE (a.state, 'APAC', 'APAC', 'EMEA', 'EMEA', NULL, 'Unknown', 'US' ) "Reseller Theater",
NULL "Customer Name",
NULL "Customer City",
NULL "Customer State",
NULL "Customer Country",
NULL "Customer Theater",
NULL "Sales Book Date",
NULL "Ship Date",
c.sales_order_number "Sales Order Number",
C.Po_Number "PO Number",
controller_model_number_4 "Product Name",
TRIM (UPPER (serial_number_4)) "Product Serial Number",
c.contract_id "Contract ID",
product_name "Support Name",
TO_DATE (c.contract_purchase_date) "Start Date",
TO_DATE (c.contract_expiration_date) "Expire Date",
NULL "Header Status",
NULL "Line Status",
NULL "Line Type",
NULL "Termination Reason",
NULL "Location_id",
NULL "Product_id"
FROM edb_assets c,
edb_accounts a
WHERE controller_model_number_4 != 'NULL'
AND serial_number_4 != 'NULL'
AND C.Amid = A.Amid(+)
UNION
SELECT 'Parature' "Source",
NULL "Distibutor",
reseller_name "Reseller",
NULL "Reseller City",
NULL "Reseller State",
A.Country "Reseller Country",
DECODE (a.state, 'APAC', 'APAC', 'EMEA', 'EMEA', NULL, 'Unknown', 'US' ) "Reseller Theater",
NULL "Customer Name",
NULL "Customer City",
NULL "Customer State",
NULL "Customer Country",
NULL "Customer Theater",
NULL "Sales Book Date",
NULL "Ship Date",
c.sales_order_number "Sales Order Number",
C.Po_Number "PO Number",
controller_model_number_5 "Product Name",
TRIM (UPPER (serial_number_5)) "Product Serial Number",
c.contract_id "Contract ID",
product_name "Support Name",
TO_DATE (c.contract_purchase_date) "Start Date",
TO_DATE (c.contract_expiration_date) "Expire Date",
NULL "Header Status",
NULL "Line Status",
NULL "Line Type",
NULL "Termination Reason",
NULL "Location_id",
NULL "Product_id"
FROM edb_assets c,
edb_accounts a
WHERE controller_model_number_5 != 'NULL'
AND serial_number_5 != 'NULL'
AND C.Amid = A.Amid(+)
UNION
SELECT 'ERP' "Source",
Imv.Bill_To "Distibutor",
Imv.Ship_To "Reseller",
Ship_To_City "Reseller City",
Ship_To_State "Reseller State",
Edb2_Global.Country_Name_Theater(Imv.Ship_To_Country ,'COUNTRY') "Reseller Country",
Edb2_Global.Country_Name_Theater(Imv.Ship_To_Country ,'THEATER') "Reseller Theater",
Cl.Company_Name "Customer Name",
Cl.City "Customer City",
Cl.State "Customer State",
Edb2_Global.Country_Name_Theater(Cl.Country,'COUNTRY') "Customer Country",
Edb2_Global.Country_Name_Theater(Cl.Country,'THEATER') "Customer Theater",
Imv.So_Booked_Date "Sales Book Date",
Imv.Ship_Date "Ship Date",
Imv.Order_Number "Sales Order Number",
Imv.Cust_Po_Number "PO Number",
Cp.Item_Name "Product Name",
Cp.Product_Serial_Number "Product Serial Number",
TO_CHAR(Imv.contract_number)"Contract ID",
Imv.Service_Description "Support Name",
Imv.Service_Start_Date "Start Date",
Imv.Service_End_Date "Expire Date",
Imv.Header_Status "Header Status",
Imv.Line_Status "Line Status",
Imv.Line_Type "Line Type",
Imv.Termination_Reason "Termination Reason",
Cl.Location_Id "Location_id",
cp.id "Product_id"
FROM ib_support_contracts_mv imv,
customer_products cp,
customer_locations cl
WHERE Upper (Trim (Imv.Serial_Number)) = Upper (Trim (Cp.Product_Serial_Number(+)))
AND Cp.Location_Id = Cl.Location_Id(+)
There is a union for each and every query, Please suggest how to tweek
Thanks
SudhirTry
select distinct a.*
from (SELECT 'Parature' "Source",
NULL "Distibutor",
reseller_name "Reseller",
NULL "Reseller City",
NULL "Reseller State",
A.Country "Reseller Country",
DECODE (a.state, 'APAC', 'APAC', 'EMEA', 'EMEA', NULL, 'Unknown', 'US' ) "Reseller Theater",
NULL "Customer Name",
NULL "Customer City",
NULL "Customer State",
NULL "Customer Country",
NULL "Customer Theater",
NULL "Sales Book Date",
NULL "Ship Date",
c.sales_order_number "Sales Order Number",
C.Po_Number "PO Number",
controller_model_number_1 "Product Name",
TRIM (UPPER (serial_number_1)) "Product Serial Number",
c.contract_id "Contract ID",
product_name "Support Name",
TO_DATE (c.contract_purchase_date) "Start Date",
TO_DATE (c.contract_expiration_date) "Expire Date",
NULL "Header Status",
NULL "Line Status",
NULL "Line Type",
NULL "Termination Reason",
NULL "Location_id",
NULL "Product_id"
FROM edb_assets c,
edb_accounts a
WHERE controller_model_number_1 != 'NULL'
AND Serial_Number_1 != 'NULL'
AND C.Amid = A.Amid(+)
union all
SELECT 'Parature' "Source",
NULL "Distibutor",
reseller_name "Reseller",
NULL "Reseller City",
NULL "Reseller State",
A.Country "Reseller Country",
DECODE (a.state, 'APAC', 'APAC', 'EMEA', 'EMEA', NULL, 'Unknown', 'US' ) "Reseller Theater",
NULL "Customer Name",
NULL "Customer City",
NULL "Customer State",
NULL "Customer Country",
NULL "Customer Theater",
NULL "Sales Book Date",
NULL "Ship Date",
c.sales_order_number "Sales Order Number",
C.Po_Number "PO Number",
controller_model_number_2 "Product Name",
TRIM (UPPER (serial_number_2)) "Product Serial Number",
c.contract_id "Contract ID",
product_name "Support Name",
TO_DATE (c.contract_purchase_date) "Start Date",
TO_DATE (c.contract_expiration_date) "Expire Date",
NULL "Header Status",
NULL "Line Status",
NULL "Line Type",
NULL "Termination Reason",
NULL "Location_id",
NULL "Product_id"
FROM edb_assets c,
edb_accounts a
WHERE controller_model_number_2 != 'NULL'
AND serial_number_2 != 'NULL'
AND C.Amid = A.Amid(+)
union all
SELECT 'Parature' "Source",
NULL "Distibutor",
reseller_name "Reseller",
NULL "Reseller City",
NULL "Reseller State",
A.Country "Reseller Country",
DECODE (a.state, 'APAC', 'APAC', 'EMEA', 'EMEA', NULL, 'Unknown', 'US' ) "Reseller Theater",
NULL "Customer Name",
NULL "Customer City",
NULL "Customer State",
NULL "Customer Country",
NULL "Customer Theater",
NULL "Sales Book Date",
NULL "Ship Date",
c.sales_order_number "Sales Order Number",
C.Po_Number "PO Number",
controller_model_number_3 "Product Name",
TRIM (UPPER (serial_number_3)) "Product Serial Number",
c.contract_id "Contract ID",
product_name "Support Name",
TO_DATE (c.contract_purchase_date) "Start Date",
TO_DATE (c.contract_expiration_date) "Expire Date",
NULL "Header Status",
NULL "Line Status",
NULL "Line Type",
NULL "Termination Reason",
NULL "Location_id",
NULL "Product_id"
FROM edb_assets c,
edb_accounts a
WHERE controller_model_number_3 != 'NULL'
AND serial_number_3 != 'NULL'
AND C.Amid = A.Amid(+)
union all
SELECT 'Parature' "Source",
NULL "Distibutor",
reseller_name "Reseller",
NULL "Reseller City",
NULL "Reseller State",
A.Country "Reseller Country",
DECODE (a.state, 'APAC', 'APAC', 'EMEA', 'EMEA', NULL, 'Unknown', 'US' ) "Reseller Theater",
NULL "Customer Name",
NULL "Customer City",
NULL "Customer State",
NULL "Customer Country",
NULL "Customer Theater",
NULL "Sales Book Date",
NULL "Ship Date",
c.sales_order_number "Sales Order Number",
C.Po_Number "PO Number",
controller_model_number_4 "Product Name",
TRIM (UPPER (serial_number_4)) "Product Serial Number",
c.contract_id "Contract ID",
product_name "Support Name",
TO_DATE (c.contract_purchase_date) "Start Date",
TO_DATE (c.contract_expiration_date) "Expire Date",
NULL "Header Status",
NULL "Line Status",
NULL "Line Type",
NULL "Termination Reason",
NULL "Location_id",
NULL "Product_id"
FROM edb_assets c,
edb_accounts a
WHERE controller_model_number_4 != 'NULL'
AND serial_number_4 != 'NULL'
AND C.Amid = A.Amid(+)
union all
SELECT 'Parature' "Source",
NULL "Distibutor",
reseller_name "Reseller",
NULL "Reseller City",
NULL "Reseller State",
A.Country "Reseller Country",
DECODE (a.state, 'APAC', 'APAC', 'EMEA', 'EMEA', NULL, 'Unknown', 'US' ) "Reseller Theater",
NULL "Customer Name",
NULL "Customer City",
NULL "Customer State",
NULL "Customer Country",
NULL "Customer Theater",
NULL "Sales Book Date",
NULL "Ship Date",
c.sales_order_number "Sales Order Number",
C.Po_Number "PO Number",
controller_model_number_5 "Product Name",
TRIM (UPPER (serial_number_5)) "Product Serial Number",
c.contract_id "Contract ID",
product_name "Support Name",
TO_DATE (c.contract_purchase_date) "Start Date",
TO_DATE (c.contract_expiration_date) "Expire Date",
NULL "Header Status",
NULL "Line Status",
NULL "Line Type",
NULL "Termination Reason",
NULL "Location_id",
NULL "Product_id"
FROM edb_assets c,
edb_accounts a
WHERE controller_model_number_5 != 'NULL'
AND serial_number_5 != 'NULL'
AND C.Amid = A.Amid(+)
union all
SELECT 'ERP' "Source",
Imv.Bill_To "Distibutor",
Imv.Ship_To "Reseller",
Ship_To_City "Reseller City",
Ship_To_State "Reseller State",
Edb2_Global.Country_Name_Theater(Imv.Ship_To_Country ,'COUNTRY') "Reseller Country",
Edb2_Global.Country_Name_Theater(Imv.Ship_To_Country ,'THEATER') "Reseller Theater",
Cl.Company_Name "Customer Name",
Cl.City "Customer City",
Cl.State "Customer State",
Edb2_Global.Country_Name_Theater(Cl.Country,'COUNTRY') "Customer Country",
Edb2_Global.Country_Name_Theater(Cl.Country,'THEATER') "Customer Theater",
Imv.So_Booked_Date "Sales Book Date",
Imv.Ship_Date "Ship Date",
Imv.Order_Number "Sales Order Number",
Imv.Cust_Po_Number "PO Number",
Cp.Item_Name "Product Name",
Cp.Product_Serial_Number "Product Serial Number",
TO_CHAR(Imv.contract_number)"Contract ID",
Imv.Service_Description "Support Name",
Imv.Service_Start_Date "Start Date",
Imv.Service_End_Date "Expire Date",
Imv.Header_Status "Header Status",
Imv.Line_Status "Line Status",
Imv.Line_Type "Line Type",
Imv.Termination_Reason "Termination Reason",
Cl.Location_Id "Location_id",
cp.id "Product_id"
FROM ib_support_contracts_mv imv,
customer_products cp,
customer_locations cl
WHERE Upper (Trim (Imv.Serial_Number)) = Upper (Trim (Cp.Product_Serial_Number(+)))
AND Cp.Location_Id = Cl.Location_Id(+)) a
Edited by: HuaMin on May 9, 2012 2:58 PM -
Need a suggestion about Hierarchy ...
Hi All,
Greeting.
I have a requirement to change Hierarchy dynamically.
e.g. Cost Center Hierarchy
Node 1 ==> Level 1
Node 1.2 ==> Level 2
Node 1.3 ==> Level 3
CC 100001
Node 2 ==> Level 1
Node 2.2 ==> Level 2
CC 100002
Requirement:
1. Add CC 100002 under Node 1.2
2. Delete Node 2.2
My Question is whether there is Interface that user can play with hierarchy so user can add/delete the node.
Perhaps, the interface can be in ABAP program / Javascript / etc.
My Idea is like this:
1. I download the Hierarchy, with that Interface I can play with the Hierarchy.
2. Using that Hierarchy, I can generate some CSV file, than I upload the Hierarchy using the flat-file.
3. But before I upload it, I erase the Hierarchy first.
But now, I'm still confuse with what the Interface it, that can make user play with the Hierarchy.
Really need your suggestion ..
Thanks a lot all and have a good day,
Best regards,
Daniel N.Either use java.net.URLConnection or Jakarta's HttpClient. Either way, you will need to familiarize yourself with Java's I/O package java.io. In particular, you will want to see how java.io.InputStream works. There are extensive I/O tutorials on this site and the Net in general.
- Saish -
Need help with re-registering a 2nd nano
Need help! I'm a new nano owner. I have 2 nanos (the 2nd is my boyfriend's). We have one computer. I unknowingly registered both under the same usename. How do I reinstall the 2nd under a new username so as to distinguish into 2 separate music libraries?
Thank you for the help. However, I ran into another problem. I choose "method three" - create a separate iTunes library for each iPod. I did just that and created a new library, named and saved it. Worked great! However, now I can't find the first library, which contains all MY selections of music. Please help. I am not well versed with the computer, so please explain in detail. Thanks!
-
WM to be streamlined - Need Expert Suggestions
Hi experts,
I need your suggestions on the below scenario.
I have been handovered with responsiblity to streamline the WMS system by resloving issue and fixing the gaps.
Problem is Client was not using WMS sytem from last 9 months and it is still connected to MM.
Hence everyday corresponding WM docuements are generated relevant to MM and other process which is still in open status.
Now i am in dilemma how to tackle this situation !
I have the below plan :
1.Resolving and closing all existing issues in production server.
2.Stock correction in IM and WM
3.Identifying and fixing the gaps
But what if i found that the existing process conifured in SAP doesn't need the business requirement ? And need to implement again ?
Believe me that any help on this will be highly appreciated.
Thanks in advance.Hi Manish,
Thanks a lot for sharing your views on this plan.
I found some congigurations changes to be done.
So my plan is to first resolve the productions issues and then disconnect WM from IM.
2) They were not using WM but WM was still active as per SAP WM, for any movement system create TO without TO confirmation you can not post a delivery. How are they managing today if there is some alternate way they can move back to the same. Try to understand that ?
Ans)They were able to issue the stock by using allow negative stock functionality
But now the major challenge is to clear the negative stock from interim storage types(911,914,921,922)
So is there any short cut method to clear this negative stocks lying in interim storage types as now i am doing it manually but there are thousands of -ve stock entries.
It is getting horrible to clear those bulk -ve entries !
Thank you.. -
Hi need good suggestion for future
hi experts,
i need good suggestion for my future _
i have 3 + exp as a ABAP consultant,
i am looking for a change, i wish to add some thing to ABAP? but, i couldn't understand what to do? pls help me in this regard..
my skills are : very good in ABAP
vey weak in OOPS.
waiting for good advice
thanks in advancethe future will depends on the OOPS only . for all the companies started working on OOPS only they are upgrading to the oops from the general abap...be aware of that ..
it is better to learn XI or HRABAP it is good for you i think. -
Need 3 suggestions on upgrading a G3 to Panther
I'm upgrading my mothers old G3 350mhz iMac to Panther. I need 3 suggestions please. Please keep in mind that she does basic things like Mail & Browse the net - nothing intensive.
1) She has 192 megs of ram. I'm I correct to assume it has 2 slots and probably one has 64 and a 128 ram chip in it. I'm guessing I could ditch the 64 chip and add a 256 or 512 in that slot and it would suffice for her needs?
2) She'll need a larger internal HD. I like Seagate. What type of HD does this take? I ordered from Egghead.com last time and was pleased, could someone please tell me which Seagates (either an 80 gig or larger) that they sell that would suffice for her. By the way, what's the max. HD it can take (like my cube, 125 gigs?)
3) Anyone that has a reputable link to a vendor that can sell me a copy of OS X Panther would be much appreciated.
By the way, she was hoping I could pull this off for around $150, but I'm wondering if it will take more like $200.Newegg.com is exactly where I just ordered a new HD for it. In fact, I ordered the same exact HD for it that I put in my Cube a month ago, which is a 120 gig Seagate (hope it worx & is compatible). I was going to get an 80 gig, but for just 12$ more I got the 120 gig so it seemed like a no brainer. I'm guessing this iMac also has the 125 gig limitation as the cube, so I didn't go beyond 120 gigs.
Ordered 512 megs of ram from OWC and also I ordered the retail Panther CD's from OWC. Panther cost a little more than the ram, but after racking my brain on eBay looking at the Panther computer specific cd's (for example, Panther for eMac, Panther for Powerbook, etc...) I just decided to get the Universal CD which should be guaranteed to work. OWC also guarantees it for 90 days, so I feel confident about the purchase.
The idea of buying a $30 iMac 400mhz firewire motherboard off of eBay has intrigued me, but at this point I don't want to do that much surgery on the unit - that can be a future upgrade if needed.
Mom will be mostly using Safari, Mail, and dabbling with digital photos from time to time (just saving them and viewing them, no intensive post processing). I think these upgrades will suffice her for atleast 2 more years (I hope).
My one concern is that she is using Netflix now and asked me if she'll be able to preview the Media Player movie trailers there (she can't now as her media player for os 9.1 just doesn't seem to play many of the trailers). I'm concerned here because I read where media player 9's recommended speed is somewhere in the range of a 450mhz G3. Anyone know if it will still work at 350mhz speed with the upgrades I'll be making? -
Hello,
I am not able to pass multiple values for single import parameter..i tired calling function module in loop and also tried RANGES..Need some suggestion on this..
Thanks and Regards,
sapdev86
Moderator Message: Basic Question
Edited by: kishan P on Oct 14, 2010 11:46 AMHi,
BAPI is nothing but a function module and also RFC enabled. So u can call that fm from outside SAP. U can call that BAPI using some logic or u can make hardcoding the parameters, its depends mainly on ur requirement.
Regards
Amitava -
Attempt to install Mountain Lion has highlighted need for internal disk repair. Even after "repair" ML still says disk is damaged. Attempt to restore from Time Machine back-up failed - cannot 'see' internal HD to restore to. Help! Has attempt to install ML caused these problems or just highlighted existing need to Repair Disk? Even so, why can back-up from Time Machine not see the internal drive to restore to?
Csound1, William & Sig .... thanks for taking the trouble to reply. I fear you are right - I'll need a new disk. I'm booked in at the Apple Genius Bar in Bordeaux, France on Wed ... quite a challenge as my French isn't great! The current internal disk is 500gb, does anyone know whether I can upgrade my 21.5" iMac (circa Oct-2009 vintage) to a larger size internal disk, 1Tb or even 2Tb? I already have one external 2Tb drive and another one on order (I have masses of media stored and more planned as I've just taken up photography). Seems a bit of a pain managing with only 500gb internal storage. OR, can you advise me on how I can store all my photos on my new 2Tb external drive - I can't seem to figure out how to set the path for iPhoto to see them (I can't even figure out where they are stored right now!). Same with iTunes, how do I set the default storage to the external drive (I moved everything manually and then imported them all from the new drive - it worked but seemed very convoluted). Any advice on how to manage multiple drives gratefully received. And thanks again for previous replies.
-
Need serious Suggestion and Help
Well,
Hi to all this is my first post so expecting correct reply to my prob actuallly in this programming era i want to get certified in java and ORACLE but first concentrating on java so first of all i need how to start up guide and finish by certification can any body provide me the clear info how to get started how to go as i am in dilema of listening j2me j2ee etc like that i need a plan how to perfectly start and cover all these whch one to cover first and which one has to cover later and i need good suggestions from all users hope u can understand my postiion
thank u ,
saipothuriBuy a good introductory book on Java programming, plus do these tutorials:
http://java.sun.com/docs/books/tutorial/index.html
....Among those tutorial, when you tackle JDBC: http://java.sun.com/docs/books/tutorial/jdbc/index.html
use Oracle as a local DB and a DB served on network by a Web application.
For Web application and J2EE, you will have to buy another introductory book. -
Hi! I am about to implement sound for a program and I need a suggestion on what to use to do so. The program is an applet which consists of six JPanels and a button interface (START/STOP/RESETetc.) On each panel, I have a sorting algorithm doing its job on a set of dots, sorting them into a line. I would like to add sound to each panel. The sound should be activated when the user clicks on the panel. Also, the pitch should increase as the algorithm gets closer and closer to finish. Does anybody know what interface, or APIs I should use in order to play the sound and modify the pitch, as the program is running?
Thanks,
Cunduro.Check out the Java "Sound" tutorial link found on this page:
http://java.sun.com/docs/books/tutorial/
Maybe you are looking for
-
Field catalog in two languages.
Hi friends, first of all, a very happy belated friendship day for all of u. I have a problem with me that I have to print the column headings in two languages i.e. our logon language and another language in brackets. Even in selection screen also I s
-
Hi all, Can u please send me blogs of csv to file scenario. Thanks in advance
-
When I select "Choose Library" the itunes library file is subdued. I copied the library file off of Time Machine and put it back in itunes, but it remains subdued. I'm running OS X 10.6.8 and iTunes 10.4.1. Help?
-
Oracle R12 Solutions Architect (Oracle E-business Suite, SOA, OBIEE)
Hi All can any one help to find documents concept & implementation of integeration between Oracle E-business Suite R12, SOA and OBIEE ?? Thanks a lot Mohamed
-
I have a second laptop. How do I find which add-ons i have on my first laptop?
I recently bought a second laptop. How can I determine which add-ons I currently have installed on my first computer?