Need a table for the texts of the field names of a table

Hi Experts,
I need to find out a table wchich has the following fields,
Table name,Fieldname and fieldname Text,.
I have tried , but not found such table.
Thanks in advance,
Harshit Rungta

Hi Jay,
Thanks for your answer ,
But dd03l does not have field texts
Also i have tried dd03t,
but its not showing the expected enteries.
I have tried searching DD* , but no luck still..
regards,
]Harshit Rungta

Similar Messages

  • Table For Header Text Old Value

    Hi,
    Could Anyone helpme in finding the table for Header text of the PO , as We know  to find the current PO Header Text,by usinf th FM READ_text but i want to to find the header text for the po before Updated , Thanks in advance
    Regards
    Priyanka M Jain

    Hi,
    I believe that you need the text just after entering in PO during the runtime.
    just enter the text and go in the debugg mode, check for table text / textline in the global parameters and you will find the text.
    Hope this helps,
    Raj

  • What are the tables for Partner Fuction regarding the Vendors Purchasing ?

    Hello Gurus,
    What are the tables for Partner Fuction regarding the Vendors Purchasing Organisation. I need the Partner Function Key, Parner Function Name, Number and the Name of the Number.
    Thanx in advance,
    Ramona

    Hi Jürgen,
    I know that table but it is only showing me the technical name of the Partner Function and I need also the rest: the text(name), number and the number name (text). I presume there are other tables for those infos.
    I am not sure if I understand what are these. I just want the table to upload the data to BW.

  • The text in the tables is hazy when printed in the new version of pages. How can I get this to the same clear text as before?

    In the new version of Pages, the text in the tables are no long clear and sharp as before, they look embedded on all print outs. How can I change this.

    You can do a check for corrupted fonts and other font issues:
    *http://www.thexlab.com/faqs/multipleappsquit.html - Font Book 2.0 Help: Checking for damaged fonts
    *http://www.creativetechs.com/iq/garbled_fonts_troubleshooting_guide.html

  • How do I convert a pdf-presentation into Powerpoint, which it is said that I can do? I can convert into Word, but that is of no help as I need to change the text in the document.

    How do I convert a pdf-presentation into Powerpoint, which it is said that I can do? I can convert into Word, but that is of no help as I need to change the text in the document.

    Hi Sara!
    Yes this sounds interesting. Can I update to that from the PDF Export I have just renewed? How much would that cost?
    Thanks for your quick answer.
    Best Regards
    Per-Olof Egli                                         Logga Egli C.I.S
    Managing Director
    Egli C.I.S. Consulting
    Lapphundsgränd 43
    SE-128 62 SKÖNDAL
    Sweden/Швеция
    Phone:         +46 708 23 03 53
    <http://www.eglicisconsulting.se/> www.eglicisconsulting.se
    <mailto:[email protected]> [email protected]
    Skype: eglipo
    Från: Sara.Forsberg 
    Skickat: den 10 september 2014 22:11
    Till: P-o Egli
    Ämne:  How do I convert a pdf-presentation into Powerpoint, which it is said that I can do? I can convert into Word, but that is of no help as I need to change the text in the document.
    How do I convert a pdf-presentation into Powerpoint, which it is said that I can do? I can convert into Word, but that is of no help as I need to change the text in the document.
    created by Sara.Forsberg <https://forums.adobe.com/people/Sara.Forsberg>  n Adobe ExportPDF - View the full discussion <https://forums.adobe.com/message/6718870#6718870>

  • I'm using apple's bluetooth keyboard and I need an easy way to switch between the text and numbers fields instead of tapping on the screen

    I'm using apple's bluetooth keyboard and I need an easy way to switch between the text and numbers fields instead of tapping on the screen

    While not in edit mode:
    - if start typing numbers, then it enters number mode.
    - if start typing text, then it enters text mode.
    Using the arrow keys exits edit mode. So this should work for you:
    1 Type text into a cell, which enters text mode.
    2 Press Return to move to the next cell.
    3 Press right arrow key to exit edit mode.
    4 Press left arrow key to get back to the cell.
    5 Type a number, which enters number mode.
    Another method that requires more planning ahead of time is to format the cells as text or number before starting the data entry. Then when you navigate to a cell while in edit mode, you will be in the appropriate mode (without having to exit edit mode).
    This all works fine for me. Hopefullly it does for you also.

  • How to display header title for 0MATERIAL texts in the query output?

    Dear Bwers,
    I have a requirement where i need to display headers titles for 0MATERIAL texts in the query output. (example "Material description"). Any ideas on how to do this?
    Thanks
    Raj

    Kamal,
    Its is as below:
    <b>Vendor</b>    <b>Vendor Name</b>
    1001 ---            Bright Industries
    1002 ---            Glow Industries
    I want to display the header title "Vendor Name" as the  title in the column instead of displaying the text without any header title.
    Thanks
    Raj
    Message was edited by:
            Raj Singh
    Message was edited by:
            Raj Singh

  • I just statred Flash CC for the first time and it seems that the text within the pop-up window (dialog box) is mis-aligned and not allowing me access to the command buttons, nor all the text. (ie: the NEW Template Box, can't see but 2/3 of the content)

    I just statred Flash CC for the first time and it seems that the text within the pop-up window (dialog box) is mis-aligned and not allowing me access to the command buttons, nor all the text. (ie: the NEW Template Box, can't see but 2/3 of the content) is there a fix to this problem? using 8.1, Monitor is a high res.2560x1440.

    Another View.
    the GUI is so hard to read (so small) I enlarge my Ps UI by the instructions below...which helped a lot.

  • Float is not working? I need the text to the right of the image but my CSS isn't working. Help pls

    Hi,
    I am having some unusual difficulty getting my images to float left/right in order to have the text beside the image.  In the image I provided, the red arrow is where I'd like the text to be but no matter what I put in the CSS file, the text begins to the lower right of the image floated left.  Can anyone help me figure out what is going on?  The code for the HTML is located here http://codeviewer.org/view/code:1f51  The code for the CSS is here: http://codeviewer.org/view/code:1f52 
    I am using the CSS code from a website I designed that works fine in that website.  Why isn't it working here?  The image name is "fundraiser.jpg"
    Thanks for your help!

    Problem is due to you not declaring the correct instructions for the class .float-left css selector:
    Change this:
    .float-left {
    margin: 5px 10px 0 0;
    To this:
    .float-left {
    float: left;
    margin: 5px 10px 0 0;

  • Authorisation object for "PO text in the material master"

    Hi,
    My requirement is as below:
    "All users can see the Purchase Order Text as usual, but only a few users should be allowed to create / change the PO Long Text.
    For other users, the same should appear in display mode only (both in creation & in change mode, MM01 & MM02)."
    Please let me know, How to map this.
    As per my knowledge thsi is possible only thru authorisation. But I want to know what is the authorisation object for "PO text in the material master" (Pl note that only for PO text in the material master field). we want control on "PO text of material master"
    Regards.
    Chinna

    Hi,
    The authorisation object is "M_MATE_MAT", pl check
    Regards
    Merwyn

  • TS3276 Hi.  Just started using Mac Mail on a macbookpro v10.6.8.  I tried to send a message with two excel (for mac) files attached.  One attached as a file, one inserted all the text into the message body.  Help?

    Just started using my Mac Mail program instead of web mail.  When I went to attach two pdf files, one attached as a file, the other inserted all the text into the body of the email message.  How do I get it to attach both pdf's as files?

    I think you're confusing two different things. If you attached PDF files and one of them displayed the PDF icon in the message window, that means it was more than one page. If you saw what appeared to be the actual document for the other PDF file, that means it's only one page and it's normal for it to display that way.
    However, I seem to recall there may (or should) be a button at the bottom-right of the message window that allows you to display those files as icons, even if they're one page. If not, there's a third-party addition you can use to add that feature:
    http://lokiware.info/Attachment-Tamer

  • Searching for a text in the file.

    I have a to search for a particular text, in the file.
    Since my file is of large size, I do not want to read the file line by line searching for the text.
    Is there any API which will help me do this?

    arc_g wrote:
    Having found the text in the file, I want to read from that point/index to the end of the file.That I can do using RandomAcessFile.
    The point is to find the text in the fileIf your problem is related to http://forums.sun.com/thread.jspa?threadID=5378628&tstart=0 then you do not want to search from the front of the file.

  • How do I enlarge the text in the toolbar of Safari 5. I need to be able to see the bookmarks that I've placed there. Also I would really like to be able to enlarge the icon size in the Safari toolbar too.

    I am hunting for help in being able to see the text in the toolbar on Safari... also, it would be helpful, too, if I could even enlarge the icons there. I'm dealing with a vision problem and finding that it's quite frustrating when I discover I've clicked on the wrong thing or I can't find what I want to click on up there. Any help will be greatly appreciated!
    Thank you!

    Hi Dorothy,
    Took me awhile to get on a Mac that has Safari 5 on it, (I hate Safari past 3.x, so never update or use it).
    Anyway, I see no options for that at all, though I think it was rumored that 10.4, 10.5, 10.6, 10.7, 10.8 would have it!
    I think your only options are to use the Zoom in Key Combo of CMD & +, or if you don't have a numeric Keypad then CMD+Shift+equal sign, or in System Preferences>Universal Access>Seeing tab, turn Zoom on, then Option+CMD+= will Zoom it in, Option+CMS+minus sign zooms out again.
    There may be some 3rd party system hacks around the text part, but they usually cause problems sooner or later.

  • I need MS office for Chinese online banking.The Apple website says the Air can use the latest MS Office if it has a 32bit processor, but the tech specs dont say which Airs have a 32bit processor.  Where can I find out?

    I need MS office for Chinese online banking.The Apple website says the Air can use the latest MS Office if it has a 32bit processor, but the tech specs dont say which Airs have a 32bit processor.  Where can I find out?

    john howkins wrote:
    Thanks, but the website says I need a 32 bit processor so presumably a 64 bit processor is no good? Or can a 64 bit automatically do everything a 32 bit one can do?
    Where is the link that says you need a 32 bit processor?  On my MBA, in the past I've ran both Office for Mac and Windows 7 (MS Office) via Parallels (Bootcamp does the same thing).  I chose installing Windows 7 in the 32 bit mode ONLY because I have a couple of other legacy Windows programs that only run in 32 bit mode.

  • HT3412 Last night I proofed my book before ordering.  Larry L.  was a great help.  Now I need to insert text under two pictures but have not been successful.  The rest of the text in the book is visible.

    Last night I proofed my book before ordering.  Larry L's directions were perfect.  How do I correct for the missing text.  All text shows with the exception of two pictures.  Don't want to order the book without the text.

    Try the following:
    1 - delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your
         User/Home/Library/ Preferences folder.
    2 - delete iPhoto's cache file delete the contents the following folder:
    User/Library/Containers/com.apple.iPhoto/
    Data/Library/Caches/com.apple.iPhoto
    3 - reboot, launch iPhoto and try again.
    NOTE: For Mavericks, 10.9,  go to your Home folder and use the View ➙ Show View Options menu to bring the this window:
    where you can check the Show Library Folder checkbox.

  • How LONG I'll need to wait for Apple GENIUS fix the incompatibility

    I need to work....How LONG I'll need to wait for Apple GENIUS fix the incompatibility # KEYNOTE and LION???
    What is the best thing I've to do???
    Downgrade the OS??? Change the Plataform????

    Each region has little differences that need to be changed and setup in order for it to work on your phone correctly. Just need to sit and wait...
    Nokia 5800 XpressMusic Red V52.0.007
    Hit the Kudos if I helped!

Maybe you are looking for