Need a Table Name
Hello Every One,
I need a table name which can list all the process chains which is built on an infoobject or infoprovider
Thanks in advance,
Thanks,
Nalin
If you are looking for process chains that are loading infoproviders or master data try <b>RSPCCHAIN</b> where version='A' and Process Type='LOADING'.
You may need info in <b>RSLDPIO</b> (and/or <b>RSLDPIOT</b>) to get the infosource name and infopackage name.
Hope this helps.
Similar Messages
-
I NEED THE TABLE NAME FOR THE FIELD DESCRIPTION GIVEN!
I NEED THE TABLE NAME FOR THE FIELD DESCRIPTION GIVEN!
Partner Type
Partner Type Desc
Partner no
Partner Name
Partner Address 1
Partner Address 2
Partner Address 3
Partner Address 4Hi Jyotirmoy ,
You can get all partners and their type in table EDPP1, depending of the partner type you need to go to specific table for address and other details, like for partner type KU(customer) goto KNA1,etc for partner type LI(vendor) goto LFA1 etc for partner type B(bank) goto BNKA etc ....
Sirish -
How can I get actual table name for Bom_Bo_Pub.Bom_Revision_Tbl_Type? I am trying to confirm if this particular table has a "REVISION_LABEL" column in 11.5.9.
Duplicate post.
Need to know actual table name for actual table name for Bom_Bo_Pub.Bom_Rev
Need to know actual table name for actual table name for Bom_Bo_Pub.Bom_Rev -
Need description & table name of following field
Hi,
I came across following fields, but not aware of decription & table name.
KSCHL
VKORGAU
VKORG
PSTYV
DATAB
DATBI
please any one can give me description or field name of above fields.
Regards,KSCHL - Condition Type
Data Type CHAR Character String
Length 4 Decimal Places 0
VKORG - Sales Organization
Data Type CHAR Character String
Length 4 Decimal Places 0
PSTYV - Sales document item category
Data Type CHAR Character String
Length 4 Decimal Places 0
DATUM - Valid-From Date
Data Type DATS Date field (YYYYMMDD) stored
Length 8 Decimal Places 0
DATUM - Valid to Date
Data Type DATS Date field (YYYYMMDD) stored
Length 8 Decimal Places 0
You can check more information about them at SE11 placing them at the Table Field.
There you can see the "Where used" key that will show you where they are used (probably many tables...)
Good Luck !
Plauto
Edited by: Plauto Abreu on Feb 25, 2011 9:23 PM -
Related to ACD(Add chage Delete) for extend button need update table name.
In which table the data(new material number , the plant number etc.) are updated for ACD(Add Change Delete) when a new material is included in plant or extend from one plant to another plant in material Management(MM).Any pointer from any side will help me a lot...
Thanks in advance
Azizur.Hi,
You can check all the material master tables and
other material related tables from t-code SE11.
There in the table name area you have to write
MA* and press F4,it will fetch you all the material
related tables in a drop down.
Hope it helps
Regards
Mansi -
Need of Tables names that link Purchase Order and the Confirmation Number
Hi All,
Can any one help me please regarding EBP tables. I am new to EBP so not aware of data flow in the EBP data dictionary.
Please can anyone explain the tables which link the Purchase order number and the Confirmation(Goods Receipt).
Please do the needful.
Thanks in advance.Hi,
You can query the tables BBP_PDHGP and BBP_PDIGP to get teh refernce doc no for PO and then use FM BBP_PD_CONF_GETDETAIL to get the details fo a particular confirmation.ALso you can search confirmations by "Reference Document", use BBP_PD_CONF_GETLIST, with parameter I_REF_DOC_NO, and then use BBP_PD_CONF_GETDETAIL for the found confirmations.
HTH.
BR,
Disha.
PLs reward points for helpful answers -
Dear All,
If we do some changes in purchasing document (PR, PO etc..) where does the data will be saved and how can we retry from the table.
Functinally we can find this under the environment menu with Item changes.
Rgds
Srinihello,
Check the following tables :
EBAN Purchase Requisition
EBKN Purchase Requisition Account Assignment
EBUB Index for Stock Transport Requisitions for Material
Logical databases: BAM, BKM, BBM
EKAN Vendor Address: Purchasing Document
EKBE History of Purchasing Document
EKBZ History of Purchasing Document - Delivery Costs
EKET Delivery Schedules
EKKN Account Assignment in Purchasing Document
EKKO Purchasing Document Header
EKPO Purchasing Document Item
EKPB "Material Provided" Item in Purchasing Document
EKPV Shipping-Specific Data on Stock Tfr. for Purch. Doc. Item
EINA Purchasing Info Record - General Data
EINE Purchasing Info Record - Purchasing Organization Data
EIPA Order Price History, Info Record
EIKP Export/import header data
EIPO Export/Import Item Data
KONH Conditions (Header)
KONP Conditions (Item)
KONM Conditions (1 Dimensional Quantity Scales)
KONW Conditions (1 Dimensional Value Scales)
Logical databases: IFM, ILM
Regards,
Mansi. -
Hi,
I need to know how get a source table name. I need to get a source table name and do some transformation. I am adding the step in IKM to do this and therefore need source table name in there.
<%=odiRef.getSrcTablesList("","[RES_NAME]","","")%> gives work table name (C$_0XXXXX) whereas actual source table name is expected.
Could someone please help?
Thanks.Hi,
May i add a point?
In IKM level, if u use this API it will always return u C$ table name only since for IKM C$ is the source. You need to capture and use this API in LKM level.
In LKM add a step in Command on target and technology as Jython and try the below code.
mySourceTable= '<%=odiRef.getSrcTablesList("", "[RES_NAME]", ", ", "")%>'
And later in IKM use this variable for ur transformation.
Thanks,
Guru -
Table name for the status Cstd
Hi
Need the table name for the sales order line item status Cstd
Steps
Go to the sales order line item
go to the Tab status
under that in processing status--> system status
here Cstd is there but we are not able to find the table name for that
Strecture is RV45A and field name is STTXT
we are planing to restrict the PP order being released if the status is not Cstd
PP order should release if the status in Sales order line item is Cstd
Can you help to findout the table name foth above field
Thanks
Kameshwar RaoHi
Table name is VBUP and the method to check the creation of Production order is BADI workorder_update
I would rather prefer to have a COSTED status as a part of the incompletion Log in SD module so that you cant save a SO if SO is not costed... See if that is possible for you
OR you can also change your Req Class settings to auto calculate SO cost estimate upon Saving SO
br, Ajay M -
PO item Condition Record number and delivery address of PO - Need a table n
Hello Experts,
I need some help as I have searched enough but did not find any solution.
I need a table name where I can find Condition Record number for PO line item.
As I have to create a new PO Layout in which I have to mention each & every condition type with value for line item.
I need to know one more thing that from which table I will get delivery address number so on the basis of that I can read entries from table ADRC.
Thanks in advance.
BhagatHI,
The First Question is regarding the PO Conditions.
For Extracting the same. we have to Go to The Table EKKI and in this table pass the PO Number and after entering the PO NUmber ,at each item level we will have a condition record number KNUMV created,
collect the condition record number and pass the value in KONV table ,in that table we will get all the conditions and its values maintained.
The second question is the delivery Address
the Delivey address comes from four ways
Plant
EKPO -Pass PO NUmber - collect the plant and pass in table T001W to get the address number
and pass the address number to ADRC table
Customer (third party)
IN table EKPO -collect the customer Number-KUNNR and pass that value to KNA1 table and then get the address number and then get the address from ADRC table.
Direct address number ( created by t code MEAN- Type ME01)
This adress number-ADRNR can be taken from EKPO table and pass this value to adrc table to get the address.
Vendor ( subcontracting)
In this IN EKPO we will have the vendor field -LIFNR and this field collect the vendor number and pass in LFA1 and get the address number and then pass the address number to ADRC table
If in EKPO,the address number and customer vendor field are blank then it picked from the plant and we have to default the Plant Address
Hope so it helps
Regards
Anjanna. -
Hi
I need the table name that contains all script form names and print program namesHi,
TNAPR Table stores all the Script form names and Print Program Names.
You can find all the Standard Script Names in table TNAPR
Regards,
Priyanka. -
Table name for the AMOUNT field in header details of costomer invoice
hi experts,
I need the table name for the field AMOUNT(wrbtr) which is in header details in fb70 tcode .I have checked many tables like bseg bsid, there its showing the amount but at item level.Hi,
the table behind structure INVFO is RBKP (Header level).
For item level you have table RSEG.
These tables refer to MM.
Once the MM documents are completed and you post the corresponding invoice RBKP data goes to BKPF and RSEG data goes to BSEG data.
The relattion between MM(RBKP/RSEG) and FI(BKPF/BSEG) documents is in field BKPF-AWKEY. This field usually contains (RBKP-BELNRRBKP-GJAHR that is MM documentMM year).
e.g. (BKPF-AWKEY = 51056024412009)
Best regards. -
Table name for serial number assigned to delivery
Hi,
How can I find the table having serial number assigned in a Inbound Delivery(VL31N).
I need SAP Table having details of serial number assigned to a Inbound delivery
regards
bobbyHi Meet,
I don't want to configure any thing, I am making a report in that I need to show the serial numbers assigned to an Inbound delivery Item Qty. , therefore I need the table name from which I can pick the serial number assigned to delivery.
like
Inbound Deliver Numbers Matnr Qty Serial No.
10000018 PENCIL 2 1234466788
10000018 PENCIL 2 1234466989
thanks
bobby -
HI Everone,
I need database table name for GPARN field, I Appreciate if any one can shareHi Everyone,
I got the answer below and i am closing the thread
table name WYT3, Field PARNR which i am looking for,
Thanks for Everybody
Bharath -
Table names for Datasource mapping and Replication details in BI 7.0
Hi All,
I need the table names for InfoSource to Datasource mapping as well as table containing replication details of OLTP sources in BW. I need these for BI 7.0 datasources (object type RSDS).
I know that tables RSISOSMAP and RSOLTPSOURCE give me the above information, but only for 3.x datasources. I want the corresponding tables giving same information for 7.0 datasources.
Any pointers to these tables would be well appreciated and suitably rewarded.
Thanks,
SaurabhHi,
Check in ROOSOURCE table, may be helpful............
Hope this helps in solving u r problem
Regards
Ramakrishna Kamurthy
Maybe you are looking for
-
Printing pages in reverse order as a default for Mac os 10.6.3
Help! Not sure what happened ... I'm trying to print document from all applications and as a default the driver is printing pages (E.G 20page doc) with page 1 first and the 2 on top, then 3 etc (pages face up as is ink jet fashion...) finally with pa
-
How do I sort data in columns using Pages
How do I sort data in columns (alphabetically) using Pages?
-
Trying to understand QT Export's size choices
Hey guys, I'm hoping to see if you guys can shed some light on a little thing - it irks me that I don't know this. It's not expressly about an FCE feature, it's more part of the Quicktime Export module, but I figured you experts here have experience
-
1KE0 - plan values not reflection in GLPCT table
Hello Gurus The users are uploading the plan values for profit center through T.code 1KE0. The file is getting uplaoded without issues.The plan values are getting updated in table COSP and for some reason only the first profit center in the upload fi
-
On the iPad air, When I tap to plus for new tab in safari, safari crash and go to home screen.