Need about SCM in SAP?
Hi,
Could any one please send the SCM Documents for learning?
Early rpely is highely appriciable?
Thanks,
Chow.
Hi
As eevrybody said MRP type ND is No planning - means the material where MRP type is ND is not picked up by the MRP run for planning. There are many instances when a material is not planned could become relevant for planning so just by changing MRP type and updating other mandatory fields like controller etc material will be ready for Planning.
Thanks
Deepak
Similar Messages
-
Need some information about SCM - Module
dear freiends i have a small doubt,
sd, mm, this all modules are came under SCM.
IS THERE ANY ANOTHER MODULE LIKE '' SCM'' IN SAP.
Thanks inadvance
narasimhaHi,
SAP has business suite with some new dimensional products, SAP SCM is part of it. Previously all were emphasizing on the indivisual modules like SD, MM, PP, PM etc., but now SAP is changing direction and talking more about End to ENd Solutions.
On this road way they came up with these new dimension products.
SAP SCM,
SAP PLM,
SAP CRM,
SAP ERP
SAP HCM
For more details
http://www.sap.com/solutions/business-suite/scm/index.epx
Thanks,
Raja -
Need documents about SCM/APO/LC basis, thanks!
Hi!
I am a basis guy and I will support SCM/APO/LC soon.
I appreciate if you can provide some documents about SCM/APO/LC basis.
Thanks a lot!You can do a search in the "Articles" section in the menu
-
SAP SCM and SAP APO: Best practices, tips and recommendations
Hi,
I have been gathering useful information about SAP SCM and SAP APO (e.g., advanced supply chain planning, master data and transaction data for advanced planning, demand planning, cross-plant planning, production planning and detailed scheduling, deployment, global available-to-promise (global ATP), CIF (core interface), SAP APO DP planning tools (macros, statistical forecasting, lifecycle planning, data realignment, data upload into the planning area, mass processing u2013 background jobs, process chains, aggregation and disaggregation), and PP/DS heuristics for production planning).
I am especially interested about best practices, tips and recommendations for using and developing SAP SCM and SAP APO. For example, [CIF Tips and Tricks Version 3.1.1|https://service.sap.com/form/sapnet?_FRAME=CONTAINER&_OBJECT=011000358700006480652001E] and [CIF Tips and Tricks Version 4.0|https://service.sap.com/form/sapnet?_FRAME=CONTAINER&_OBJECT=011000358700000596412005E] contain pretty useful knowledge about CIF.
If you know any useful best practices, tips and recommendations for using and developing SAP SCM and SAP APO, I would appreciate if you could share those assets with me.
Thanks in advance of your help.
Regards,
Jarmo TuominenHi Jarmo,
Apart from what DB has suggested. you should give a good reading on the following.
-Consulting Notes (use the application component filters in search notes)
-Collective Notes (similar to the one above)
-Release Notes
-Release Restrictions
-If $$ permit subscribe to www.scmexpertonline.com. Good perspective on concepts around SAP SCM.
-There are a couple of blogs (e.g. www.apolemia.com) .. but all lack breadth.. some topics in depth.
-"Articles" section on this site (not all are classified well.. see in ECCops, mfg, SCM, Logistics etc)
-Serivce.sap.com- check the solution details overview in knowledge exchange tab. There are product presentations and collaterals for every release. Good breadth but no depth.
-Building Blocks - available for all application areas. This is limited to vanilla configuration of just making a process work and nothing more than that.
-Get the book "Sales and Operations Planning with SAP APO" by SAP Press. Its got plenty of easy to follow stuff, good perspective and lots of screen shots to make life easier.
-help.sap.com the last thing that most refer after all "handy" options (incl. this forum) are exhausted. Nevertheless, this is the superset of all "secondary" documents. But the maze of hyperlinks that start at APO might lead you to something like xml schema.
Key Tip: Appreciate that SAP SCM is largely driven by connected execution systems (SAP ECC/ERP). So the best place to start with should be a good overview of ERP OPS solution overview, at least at the significant level of depth.). Check this document at sdn wiki "ERP ops architecture overview".
I have some good collection of documents though many i havent read myself. If you need them let me know.
Regards,
Loknath -
Some basic question about SCM Installation
Hi Folks,
Could you please advice me about some basic questions about SCM and its installation -
Q1. Do I need to have an R/3 System to be able to practice OR demo the SCM system?
Q2. If, yes, which version of SCM is compatible with the ECC 5.0?
Q3. What are the basic requirements to install SCM (version compatible with ECC 5.0) and ECC on a oracle db and windows OS?
Q4. Does SCM have APO and BI as an inbuilt functionality OR does the user need to purchase these as an Add-On?
I know these are some basic questions, but these will help me give me a direction.
With best wishes,
KrishnaHello Krishna -
Q1. Do I need to have an R/3 System to be able to practice OR demo the SCM system?
---> There are various Modules in SCM Like APO (Sub Modules DP (stand alone), SNP Needs Master data from R/3 and has to pass on transactional Data to R/3, PPDS same as SNP, GATP same as SNP), ICH needs Data from R/3 to work with. Core Interface (CIF) connects R/3 to APO for transferring data.
Q2. If, yes, which version of SCM is compatible with the ECC 5.0?
-->For thorough understanding explore the following links
http://help.sap.com/saphelp_scm41/helpdata/en/9b/954d3baf755b67e10000000a114084/frameset.htm
http://help.sap.com/saphelp_scm50/helpdata/en/9b/954d3baf755b67e10000000a114084/frameset.htm
Q3. What are the basic requirements to install SCM (version compatible with ECC 5.0) and ECC on a oracle db and windows OS?
-->Refer Above
Q4. Does SCM have APO and BI as an inbuilt functionality OR does the user need to purchase these as an Add-On?
--> APO comes with a small BI inbuilt functionality. you can only perform certain functions using that BI.
Hope this helps.
Regards,
Suresh Garg -
Need to convert a SAP Script to Smart Form
Hello,
I need to convert a SAP script to a Smart form.
I am aware of converting it but have a question abt print program?
Can the print program which is currently attached to the SAP script supprot the Smart form?
Could some one let me know if i can use the same program or need to do some modifications in it?
Pointa rewareded if useful.
Thanks,
Krishnahi
t-code smartforms
utilities->migrate sapscript
check the link below it provides steps to convert sap scripts to smartforms
http://www.ficoexpertonline.com/downloads/Iyer_SmartForms.pdf
Check these threads.
Smartforms -> sapscript
Re: Convert SapScript to Smartforms ?
regards.
Kiran Sure -
Need interview questions on SAP-XI 3.0
HI all,
Can some body help me.
I am Explicitly luking for NEW (or updated ) interview questions and i am abt to start my interviews from tommorrow.
any idea where i can find more info on SPECIFIC XI interview questions/FAQS other than the available sdn.sap.com website.
Plz help me to go thru this..
I wud surely appreciate ur timely help.
Thanx
VKLHi V L
Some of them are:
-->Steps required to configure a scenario
-->Types of mapping
-->which all configurations you need to do in R/3
for an Idoc to file scenario
-->Questions regarding the interfaces you have worked
on
-->Qestions on adapters eg. Idoc , RFC etc
-->How to configure JDBC Adapter(Sender & Receiver)
-->Qestions on Content conversion
-->Questions on BPM and the step types in BPM.
-->Questions on ALERTS. How to configure Alerts, alert rules, etc.
-->Architecture of XI.
Also check XI FAQs by Michael:
/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions
Kindly go through this link where you will find many interview questions:
/message/1209232#1209232 [original link is broken]
Re: Interview for TCS
Prequisite need in XI and SAP
Re: Provide me some IDOC related docs.
All the very best for your interviews.
---Satish -
After upgrading to Mountain Lion from Lion, Mail, Safari and Note need about five minutes to start.
After starting, Mail answers are very very slow. The same for Note. Instead of, sending mails is only a bit slower than before upgrading.
In Safari, I choose Goggle as starting page in Preferences, but at every restart misses that starting page and the search strip says "Seek Google or instert an address".Well, I found the solution here in another thread.
i just want to mention that the samw thing was happening also for the notes and the reminders apps!! (they quit unexpectedly!!).
So I found the solution here.
Thank you graphicsluc!!! -
I have one of the oriignal IPOD's circo 2006. I've got about 150 tunes on it which has been fine but today tried to add another 200 or so and was advised I need about 848 MB to load them. Is there any solution. I have 2 playlists. One with the original 150 tunes and one with the addiitional 200 tunes. Thoughts as now my IPOD won't sync at all and I don't want to delete any of the songs if I don't have to.
How much storage on the IPOD - I have one that has 60GB on it. Also have an IPOD shuffle that held less songs.
As your IPOD does not have enough storage for all of your songs, you have to create a list to sync to it that does not exceed the storage size.
For instance my IPOD shuffle had its only list of songs that did not exceed storage.
The IPOD gets them all because I only loaded the songs from my CDs that I really liked into ITUNES - leaving out the ones I skipped over. -
What technical components are needed for integration of SAP BI and BO?
Hello,
What technical components are needed for integration of SAP BI and BO?Hi,
you need to setup a BOBJ server (eg. BusinessObjects Enterprise XI 3.1 or BO Edge 3.1) and then install the BusinessObjects integration Kit for SAP on the same machine your BOBJ server runs.
In order to build reports you can either use Crystal Reports (eg Install Crystal Report Designer 2008 V1 if you have an XI 3.1 server installed), WebIntelligence (Install the Business Objects XI 3.1 Client Tools in order to be able to build universes), BusinessObjects Voyager or XCelsius. Please note that you have to always install the BOBJ integration Kit for SAP (should be the same version as your server and client installation) on your clients AFTER you installed one or more of the above client tools.
Please take again a look at the following link for more detailed information (from Ingo) on this:
[https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a00ee3b2-5283-2b10-f1bf-8c6413e0898f]
Regards,
Stratos -
New to SAP PI, I need more information on SAP PI Topics
Hi Guys,
I'm New to SAP PI, I need more information on SAP PI Topics which are related to Development and configuration.
i have gather some information please add more topics and major scenarios if i missed out.
SAP PI Topics:
1. Mapping
u2022 Standard Functions
u2022 User-defined Functions
u2022 Message Mapping
u2022 Multi-Mapping
u2022 Java, XSLT mapping overview
2. Business Process Management
u2022 BP Modeling
u2022 BP Engine
3. Design and Configuration
u2022 System Landscape Directory
u2022 Enterprise Services Repository
u2022 Integration Directory
4. Runtime
u2022 Integration Engine
u2022 Different installations of Adapter Engines
u2022 Runtime Workbench / Monitoring
u2022 Architecture
5. PI as Component of SAP NetWeaver
u2022 Positioning
6. Overview and Basic Concepts
u2022 Adapters & J2EE Adapter framework
u2022 Business Process Management
u2022 Mapping
7. Adapters
8. Technical Connectivity for communication with SAP and non-SAP systems
u2022 File/FTP(S) (File Systems / FTP Servers)
u2022 JDBC (RDBMS systems)
u2022 JMS (Messaging systems, e. g. MQSeries, SonicMQ)
u2022 SOAP (Web Services based on SOAP)
u2022 WS-RM (Web Services based on WS Reliable Messaging)
u2022 HTTP_AAE Adapter
u2022 Plain HTTP(S)
u2022 Mail (Mail Servers via SMTP, IMAP4, POP3)
u2022 SAP Business Connector (SAP BC)
u2022 Marketplace (SAP Marketplaces)
9. Application Connectivity
u2022 RFC
u2022 IDOC_AAE Adapter
u2022 IDoc
u2022 Proxy (ABAP and Java)
10. SAP Industry Business Packages (contain adapters and content)
u2022 RNIF 2.0 (RosettaNet)
u2022 RNIF 1.1 (RosettaNet)
u2022 CIDX (RNIF 1.1)
11. Advanced Adapter Engine Extended u2013 AAE
u2022 PI as Infrastructure for Service Oriented Architecture (SOA)
SAP PI Scenarios:
u2022 SOAP to JDBC scenario
u2022 RFC to FILE scenario
u2022 Multiple IDOC's to File scenario
u2022 File to File scenario
u2022 File to RFC scenario using BPM
u2022 File to JDBC scenario
u2022 Idoc to File scenario
u2022 Abap Proxy to XI scenario
u2022 Idoc Flatfile to Idoc XML ScenarioYou may search for all basic topics on SCN and you will get required information. Such basic questions should be searched before posting. Thread locked.
Regards,
Prateek Raj Srivastava -
Need Consignment report in SAP
Hello all MM Gurus,
Is there any report in SAP that shows the total consignment stock arrival and consignment stock consumption in a given plant. The report should show the consignment stock arrival/consumption, value of the stock, material number, etcetc.
Please let me know. I have suggested my user that we can use MB51 or MB54. But I am afraid, my user would get confused if he/she uses these transactions. Hence, I need a report in SAP that is particularly made for consignment stock.
Thanks and Regards,
Umakanth
Moderator message: we are the ABAP gurus, please have a look in the ERP MM forums.
Edited by: Thomas Zloch on Nov 26, 2010 2:20 PMHi,
I recommend the PCA standard drill-down or interactive reports accessible via the follwoing menu path:
Accounting --> Enterprise Controlling --> PCA --> Infosystem --> Reports for PCA
There are several reports which allow entering profitcenter groups or profitcenters.
Long Text is not possible. Makes also no sense to report on Long Text.
Best regards,
Andreas -
Hi gurus, can any one explain me about patches in SAP?
Hi gurus,
Can any one explain me about patches in SAP?
Regards
RaghuHi Raghu,
If you do bit of googleing you will get information.
http://help.sap.com/saphelp_smehp1/helpdata/en/30/1fea80d9b44f5a88fc0038d3dabb76/content.htm
http://help.sap.com/saphelp_smehp1/helpdata/en/57/4e0eb0eae6457ea69b509813048989/content.htm
http://help.sap.com/saphelp_nwce10/helpdata/en/a8/02784278b66255e10000000a155106/content.htm
http://www.saptechies.com/support-package-stack-guide-sap-netweaver-70/
http://www.sapdev.co.uk/upgrade/sap-patching.htm
http://www.erpgreat.com/basis/sap-patch-administration.htm
Regards,
Deepanshu Sharma -
I need a report in SAP which allows multiple Profit centers selection with
Hi,
Cany anybody help me with below issue -
I need a report in SAP which allowing multiple Profit centers selection with :
- Profit Center #
- Profit center Name
- Profit center long text
- Profit Center group
- the related PC node showing the BU and the product category group.
Let me know is there any report which can provide us with all this details.
With regards.Hi,
I recommend the PCA standard drill-down or interactive reports accessible via the follwoing menu path:
Accounting --> Enterprise Controlling --> PCA --> Infosystem --> Reports for PCA
There are several reports which allow entering profitcenter groups or profitcenters.
Long Text is not possible. Makes also no sense to report on Long Text.
Best regards,
Andreas -
In CMOD Wht ever I did , Shuld I need to save in SAP package?
Hi Experts,
pls. one simple doubts that,
When I am trying to do <i><b>FIELD ENHANCEMENT via CMOD->MENU->GO TO->TEXT ENHANCEMENTS->NEW DE cust...???</b></i> its not allowing me to save in Z_MY_SD_PACKAGE, (its prompted me to save in SAP package; mine KATR6 field relavent is BV package)
1 - So, Shuld I save it SAP package?
2- I mean, Wht even we did in CMOD, Shuld we need to save in SAP packages, NOT in Z_MY_PACKAGES??
thanq.
Message was edited by:
SrikharSo, Shuld I save it SAP package?
2- I mean, Wht even we did in CMOD, Shuld we need to save in SAP packages, NOT in Z_MY_PACKAGES??
If you modify the sap standards then you should not give custom(Z) type of package.
Simple example - I have done many things to sales order user exit.
MV45AFZZ Include is the sap standard include,if you modify this include,system will not prompt Package,it asks directly Transport request.
Your case i do not know since i did not your user enhancement.
Srikhar ,
Personal note : Once you get solution,Please give answer,so that other's can use..
Thanks
Seshu
Maybe you are looking for
-
IPhone keeps asking for an Apple ID that's years old
Hopefully someone can help. I've been using my Apple ID for two plus years and I just got the 5s. I did an iCloud backup with my old iphone 4 which used my normal Apple ID. On the new phone after I set it up from the cloud backup and it shows my norm
-
F-44 clearing with multiple line item
Hi All, When I am trying to clear 24 invoices of one vendor with payment line item in f-44, in simulation mode it is showing only the last line item amount but when posting the same it is clearing all the invoices. Just need to clarify if it is corre
-
Apple ID needs to be entered every time
Hi there, Since my update from iOS 5 to iOS5.1.1 I experience that the ipad is asking me permanently for my apple id details when I start or re-launch an app. I find this very annoying. Can sb tell me how I can switch this off? Thx.
-
Passing data to a separate jpf
What is the best practice for passing data from one jpf to another? I have a collection of jpf's generated from rowset controls. And, I would like some of them to restrict their query only to the parent row as selected in a previous screen. What is t
-
Popup2 to open page in new window
I want to open up a new page (page alias named 'ZIP') when the user double clicks in a field. I added the code below to the Element attributes of the field, but it can't find the page. What am I missing? ondblclick="javascript:popUp2('f?p=&APP_ID.:ZI