Need additional BOMMAT idoc to be posted for a particular plant value

Hi Friends
Need some urgent help on my scenario, File to BOMMAT idoc, situation is , we need to send an additional idoc with BOMusage field to be Z whenever the plant number is 4050, otherwise the existing idoc should be sent, how can we achieve this , can anybody throw some light on this.

Hello,
we need to send an additional idoc with BOMusage field to be Z whenever the plant number is 4050, otherwise the existing idoc should be sent
In your interface determination, specify the two idocs. In the condition editor:
1.) For the standard idoc, your condition should be similiar to this:
Left Operand     Operator      Right Operand
/Root/PlantNumber !=              4050
2.) For the other idoc:
Left Operand     Operator      Right Operand
/Root/PlantNumber =              4050
Hope this helps,
Mark

Similar Messages

Invoices Posted for a material plant combination

Hi Experts
I need to get the list of invoices posted for a material-plant combination.
Is there any reports available or which table i can check this?
Thanks
Raja

Hello Raja,
Use the table RSEG - Document Item: Incoming Invoice
Fields:
BELNR - Accounting Document Number
GJAHR - Fiscal Year
EBELN - Purchasing Document Number
EBELP - Item Number of Purchasing Document
MATNR - Material Number
WERKS - Plant
Regards
Gregory Mathews

How to find whether an Invoice is been posted for a particular PO

Hi,
How to find whether an Invoice is been posted for a particular PO.
I have a scenario where I fetch data into an internal table T_CDHDR(It has PO and other details). For each and every entry(PO) in that internal table I have to see whether an Invoice is been posted or not. They told to use <b>EKBE(Purchasing document history)</b> table. But, I don't know which field to check for and based on what conditions.
Can someone help me with sample code or some valuable inputs.
Thanks in advance.
Regards,
Paddu.

HI,
TABLE IS RIGHT.
IN THAT TABLE FOR THE FIELD BEWTP CHECK WHETHER ENTRY IS "Q".
Q STANDS FOR IR-L THAT MEANS INVOICE IS DONE.
ON THE SELECTION SCREEN OF EKBE TABLE ENTER THE PO NUMBER.
THEN CHECK WHETHER IT HAS ENTRY FOR BEWTP 'Q'.
YOU CAN CROSS-CHECK THIS DATA FROM TABLE WITH THAT IN ACTUAL PO IN T.CODE - ME23N.
ENTER PO NUMBER ,THEN IN ITEM DETAILS , IN HISTORY TAB SEE FOR THAT INVOICE NO.

How to get list of customers for a particular plant.

Hello All,
I have a requirement of the customer aging analysis report where I need to get the details of the customer for a particular plant.I have searched the tables T001w and Kna1 but found no result for my requirement.can any body tell me how to solve this issue or tell me any tables which give the information regarding the customers based on a particular plant.
Regards,
Pavani.

Thank u all...for the reply
But while creating a customer in XD01 we are not maintaing any plant data in that we are just giving the sales area data and the company code data in the initial screen. A particular customer can be used for any no of plants in our organisation than in that case how is it posible to get the data for the required plant.Here the plant is not same as the customer or vendor.
Regards,
Pavani.
Edited by: Pavani Rayappureddi on Mar 16, 2009 4:19 PM

Opening and closing balance for Excise duties for a particular plant

Dear Experts,
Please suggest how I can get balance of excise duties for a particular plant at a given date in registers(RG23A & RG23C PartII).
Thanks
Lokesh

Dear Lokesh,
Just find the Google with "J33_BPP_32_CHEM_EN_IN" you will find the Word document for standard SAP document
With all the steps in details

Sale Orders and Delivery Orders for a Particular Plant?

Hi,
Could you please tell me which tables or reports are to be used to
find
a) Sale Orders for a particular Plant
b) Delivery Orders for a particular Plant?
Regrds,
Binayak

You can see sales order for Particular Plant by using VA05, in that report you can find plant column. On that column you can sort out.
In Vl06 you can find the deliveries according to the Shipping point. Each shipping point is assigned to plant. So, indirectly you can find the delivered orders from the shipping pont and plants
Reward points if it is helpful

Depreciation posting for a particular asset

Hi,
I have a requirement to post depreciation for a particular asset.
When I run AFAB, System is showing document in test run mode, whereas in liverun mode, system is not posting the depreciation.
Could anyone of you, help me what could be the problem , why the system is not posting the depreciation for aparticular asset.
Thanks in advance
Regards
Uma

Hi
In AFAB trans. parameters for Test run sub screen remove the Test Run check box while run the depreciation then it will post.

Change number mandatory Routing for a particular Plant

Dear All,
i have requirement to make change no field mandatory for only one plant. this field should not be mandatory for other plant. I tried with OP5A tcode, using plant as influencing field, change no as modified field and content as plant no. so its working but,
it doesnt work for the 1st time execution. from 2nd time only its working. like this user will be able to make the changes without change number in every login 1st time.
So i set the plant as user parameter in user profile and made it working. but its not full proof soluton. can any one suggest some solution??
please suggest.
Thanks & Regards
Vinay
Edited by: vinay upadhyay on Sep 7, 2009 9:46 AM

Hello Santosh
The change number requirements on CS02 is controlled by the authorization object C_STUE_ROH.
Note 420878 provides more information about this scenario.
Check the relevant information provided on the note below:
Symptom
In Customizing of the BOM, the history requirement is set or a BOM requires a history. Despite this, it is possible to process BOMS without engineering change management. The system only processes a warning message (29 045) which can be skipped.
Additional key words
CS02, change number, OS27, W045(29)
Cause and prerequisites
Authorization profile
Solution
Check the authorization profile of the respective user.
Example:
         C_STUE_NOH <OBJ>
            &_SAP_ALL    <AUT>
                NOHIS      <FLD>
would have the authorization to process BOMs requiring history without a change number. In this case, if you change '*' to ' ' in NOHIS, you will no longer receive a warning, but rather an error message.
BR
Caetano

Error in printout for mb1a movement type 221 for a particular plant

Hi All,
While printing through MB90 for the material document which processed through MB1A and movement type. The following error is appearing for only one particular plant , i am getting the following error.
Text ID F14 language EN not found
Message no. TD600
Diagnosis
You want to read a text which does not exist in the data base (or update memory).
System Response
Reading could not be carried out.
Procedure
You need to create this text:
1. Initialization (module INIT_TEXT)
2. Save (module SAVE_TEXT)
Please send me any solution if any gets same error.
Thanks,
Suresh.

Hi Bijay,
Thanks for your relpy. I tried to add the plant and storage location, I am getting the below error.
Entry LT91 does not exist in TSP03 (check entry)
Message no. 00058
Diagnosis
Input values must be defined in Table TSP03. The value or values 'LT91 ' are not specified in this table.
Procedure
Check whether the input is correct and correct if necessary.
Procedure for System Administration
If this is not an incorrect entry, check the system settings and change them if necessary.
If there is a connection to the Customizing system, you can maintain the system settings by choosing Customizing in the Performance Assistant or Maintain Entries (F5) when displaying the help in a modal dialog box.
Thanks,
Suresh.

Transaction for data particular plant number from BW to APO is not loaded

Hi gurus,
Transaction for data for particular plant number from BW to APO is not loaded . I checked the transfer rules and update rules there is no restrictions for this plant number. pls help guys.
Regards
shekar reddy

Hi Shekhar,
What is the mechanism you are using to export data (APD, Open Hub or any other)?
Check if the data is getting extracted in the proper source in BI system itself.
Regards,
Durgesh.

Allowed Movement types for a Particular plant..

Hi All,
Please let me know is there any option available in SAP to configure the allowable movement types for particular plant ?
Most urgent
Thanks
Chandru

Did you ever find a way to do this? We have a similar requirement that we want to allow some of our users to use movement type 501 but not all. We would also like to restrict another movement to only be allowed in certain plants within our company. Our basis person is saying that this can't be done but I was certain that it could.

How to query a collection for a particular feild value

I have a service called as RevenueItemsService and iam calling the below operation:
<wsdl:operation name="GetRevenueItems">
<wsdl:input message="tns:GetRevenueItemsSoapIn" />
<wsdl:output message="tns:GetRevenueItemsSoapOut" />
</wsdl:operation>
and in the response i get array of UserDefinedField as a part of response The array is of below type :
<s:complexType name="UserDefinedField">
<s:attribute name="Name" type="s:string" />
<s:attribute name="Version" type="s:decimal" use="required" />
<s:attribute name="UDFType" type="tns:UDFType" use="required" />
<s:attribute name="Enabled" type="s:boolean" use="required" />
<s:attribute name="Required" type="s:boolean" use="required" />
<s:attribute name="Index" type="s:int" use="required" />
<s:attribute name="Value" type="s:string" />
<s:attribute name="ForBizLogicEntity" type="s:string" />
</s:complexType>
My question is when i get array(assume i got 5 userdefined feilds as the array)
I want to query the xpath in such a way that in the array if i ask for a particular version in the userdefined feilds then it has to give me that particular index value.
Example:
we have a array of following :
Array1:
name: xxx
version : 1.0
UDF type: udf1
Index: 1
Array 2
name: YYY
version : 2.0
UDF Type : Udf2
index : 2
etccc.....upto n .
so my question is , i want the result in such a way if i say version=2.0 then it has to return me the corresponding index as 2. How do i do that in BPEL.
Please provide me some suggestions.
Or .
you can provide me some link where i can find the answer
Any suggestions are appreciated.
Regards
Pavan

little example :
<element name="assignInArrayProcessRequest">
<complexType>
   <sequence>
    <element name="array" maxOccurs="unbounded">
     <complexType>
      <sequence>
       <element name="name" type="string"/>
       <element name="version" type="string"/>
      </sequence>
     </complexType>
    </element>
   </sequence>
</complexType>
</element>so the array element is unbound.
this is the process payload
<ns1:array>
<ns1:name>test1</ns1:name>
<ns1:version>213562363</ns1:version>
</ns1:array>
<ns1:array>
<ns1:name>test2</ns1:name>
<ns1:version>yeryeryer</ns1:version>
</ns1:array>
<ns1:array>
<ns1:name>test3</ns1:name>
<ns1:version>fytetr</ns1:version>
</ns1:array> now you can use this peace of code
        <assign name="setArrayValue">
            <copy>
                <from expression="string('1.9999')"/>
                <to variable="inputVariable" part="payload"
                    query="/client:assignInArrayProcessRequest/client:array[1]/client:version"/>
            </copy>
        </assign>to update the value of version in the first element of the array.
in this example you can also create some loop and use the 'index' , the [1] value dynamic to update more then 1 values in the array-element
the response after the update
<ns1:array>
<ns1:name>test1</ns1:name>
<ns1:version>1.9999</ns1:version>
</ns1:array>
<ns1:array>
<ns1:name>test2</ns1:name>
<ns1:version>yeryeryer</ns1:version>
</ns1:array>
<ns1:array>
<ns1:name>test3</ns1:name>
<ns1:version>fytetr</ns1:version>
</ns1:array>Maybe you can use it :)

Stock posting for warehouse managed plant

Dear All,
Our plant is warehouse managed.
I am unable to post the stock using 561 or 501 Movement types.
How to post the stock if the plant is warehouse managed?
Is there any spcial indicators available?
Kindly suggest?
Mullairaja

Hi,
I think, my question is not phrased well.
My question is, if the plant is warehouse managed, do we need to use different movement types to post the stock?
Because, I was unable to post the stock using the movement types 561 or 501.
Please clarify.
Regards,
Mullairaja

Cannot do posting for a particular profit center

Hi SAP Experts,
There is one strange issue that i am facing. I have one company code and when i try to do FB50 with a 520000 profit center then the system throws errors msg.
Profit center 520000 not valid, Message no. ZFI000.
If i use other profit cneter they system allows to do the posting, even if a create a new profit center still i can use that profit center for the company code
I have check that this profit center is active and co codes is assinged.
I am not able to understand why system is behaving in such a manner ??
Regards.

Hi,
your message indicates that validation applicable for this PC,
Discuss with your business user, is there any business requirement to restruct the postings for this PC. or
Check validation logic through : T.Code *GGB0 * here you come to know what is the business requirement.
Regards,
Viswa

To Get material group for a particular Plant

HI,
I need some info like to find all the materil groups and the related plants for the same.
Regards,
Ramesh.

SELECT MARAMATNR MARAMATKL MARC~WERKS FROM MARA
INNER JOIN MARC ON MARAMATNR = MARCMATNR
WHERE MARC~WERKS = PLANT.
If you want for specific plant you can include that in the where clause like i have shown here
Regards,
Ravi
Note : Please mark all the helpful answers

Need additional BOMMAT idoc to be posted for a particular plant value

Similar Messages

Maybe you are looking for