Need advice for buying a mini pci wireless card

Hi,
I have a Toshiba laptop that I have bought almost two years ago. This laptop has a Intel 2200BG wireless chipset which does work, but the connection quality is quite low. Sometimes the connection speed jumps, sometimes it drops altogether. I've tried all the driver upgrades, power management tricks and all that could be found on the net. Some of those help, but there is always something that does not work as it should.
Long story short, I've decided to buy a Wireless mini pci card. The problem is that these cards are nowhere to find. There is nothing on Toshiba's site and apart from some offers on eBay there is almost nothing to choose from. I know there are other options, but I prefer a mini pci card.
Can anyone help me on this issue?
Thank you,
Peter.

Hi Peter!
I had the same problem with my Satellite M70 and Intel PRO/Wireless 2200BG card. I had noticed that ping response (e.g. with WinMTR application) to router was very poor and there was a even 3 seconds delay and many packets lost. It was impossible to me to make any VoIP call. Other laptops of course work fine in the network. I was said in Toshiba service that it should be like this, and they cannot exchange the card.
The only solution that I found is to change card configuration to work only in "B" mode.
Try:
1. Go to Start/Connect To/Wireless Network Connection/.
2. Click "Change advanced settings".
3. Click Configure and choose Advanced tab.
4. Find "Wireless network mode", change to 802.11b only!
It will reduce maximum network connection rate to 11MB/s (important only if you are sharing huge files in local network) but stability will be significantly better. Ping will be never less than 0,05s.
Other solution is of course buying a Atheros mini-pci card. Try to find it in shops specialized in wireless communication.
Best regards
Chris

Similar Messages

  • Startup gets 'Network cable unplugged' on mini-PCI wireless card

    I recently installed a Netgear DG834GT wireless router and now have an intermittent problem connecting my Tecra 9100 to it. If the 9100 has been shutdown for a while (like overnight), when I restart I always get 'Network cable unplugged' for the wireless connection. Rebooting a number of times (anything from 3 upwards) I eventually get connected to the router and all then works fine for hours. Even a quick restart at this point (i.e. once the wireless card has connected) does not cause a problem but as soon as I leave the machine shutdown for a length of time it fails again at reboot.
    There are no errors in the Event log.
    I am using the built in mini-PCI wireless card and have already upgraded to the latest driver.
    Any ideas gratefully recieved, at the moment each morning is a 20-30 minute frustration of rebooting trying to get my connection working.
    (Running Win2K Professional)

    Checking other boards for help (Netgear etc.) it seems that the 'Network cable unplugged' is a common message when wireless connectivity is failing. However, to prove the point, I have disabled the other LAN card (for which I was also getting 'network cable unplugged' but as expected since it was). I still get the same issue with the wireless card, although now the reboots are slightly more predictable - it normally seems to succeed on the third reboot. I guess disabling the other card has changed the startup timing slightly and in that way made things slightly better.
    Again, any other suggestions gratefully received. As this seems to be a timing issue at startup, I am suspicious that one of the other things that runs at that time is causing the problem.

  • Startup gets 'Network cable unplugged' on mini-PCI wireless card (again)

    Reposting as previous topic has been locked although has not been resolved. Original post below, please see previous post for more details
    I recently installed a Netgear DG834GT wireless router and now have an intermittent problem connecting my Tecra 9100 to it. If the 9100 has been shutdown for a while (like overnight), when I restart I always get 'Network cable unplugged' for the wireless connection. Rebooting a number of times (anything from 3 upwards) I eventually get connected to the router and all then works fine for hours. Even a quick restart at this point (i.e. once the wireless card has connected) does not cause a problem but as soon as I leave the machine shutdown for a length of time it fails again at reboot.
    There are no errors in the Event log.
    I am using the built in mini-PCI wireless card and have already upgraded to the latest driver.
    Any ideas gratefully recieved, at the moment each morning is a 20-30 minute frustration of rebooting trying to get my connection working.
    (Running Win2K Professional)

    More info : I have found that this is time related rather than related to the number of reboots. It always fails on the first reboot after being shut down for a period of time. At this point, however long I wait the connection never comes up. However, if I wait a few minutes and then reboot, the second reboot will always successfully establish the connection.
    On this basis, the problem has become slightly less annoying as I have a workaround - boot once, wait a few minutes and reboot. That being said, any information on how I can isolate this further (e.g. tracing what is running at startup) would be gratefully recieved.

  • 1802 Error Message on installation of Broadcom Mini-PCI Wireless Card

    I am getting an 1802 error message on boot when I install the Broadcom Mini-PCI wireless card. I know it has something to do with some code IBM put into the BIOS or CMOS to check the cards for manufacturer or something like that. Is there anyway around this message or do I have to try and find an IBM mini-PCI wireless card for this machine?
    Solved!
    Go to Solution.

    All depends on how one defines success...
    To put it this way: A3x machines are very unpredictable and moody when it comes to these issues, and you're talking to someone who has owned over a hundred A31p ThinkPads, not counting A30/p and A31 units along the way. More than once I've faced a scenario where the card that worked "out of the box" in one machine required a hack in the next one...
    But to answer your question:
    Can it be done? Absolutely.
    Do I recommend it? Absolutely not.
    IBM-issued (with a proper FRU number) Intel 2200BG should work in your machine with no hack. Some people have reported this experience even with generic card of the same type.
    Hope this helps.
    Cheers,
    George
    In daily use: R60F, R500F, T61, T410
    Collecting dust: T60
    Enjoying retirement: A31p, T42p,
    Non-ThinkPads: Panasonic CF-31 & CF-52, HP 8760W
    Starting Thursday, 08/14/2014 I'll be away from the forums until further notice. Please do NOT send private messages since I won't be able to read them. Thank you.

  • A20p, got a mini-pci wireless card working on it

    I had thought this impossible. Everywhere i'd looked i couldn't find one person who'd got this working.
    Today i've just done it. I had an SMC wireless router which had failed, it kept powering itself off all of the time so i'd bought a new router. Before i chucked the old router out i took it apart to have a look to see if i could find what had failed. To my surprise it had a mini-pci wireless card mounted in a slot on the mainboard (to give it wireless functionality i guess). I got the wireless card out and left the antenna leads still connected to the antennas on the back panel of the router.
    Then i removed the mini-ethernet/56K modem card (IBM FRU-08K3125) from the A20p mini-pci slot and put the mini-pci wireless card in it's place. For the time being i left the antenna wires hanging out of the bottom with the router back panel and antenna still attached.
    I hadn't got a clue who the manufacturer of the wireless card was but what i did have was the chipset number "TNETW1130GVF" which i obviously got off the chip on the mini-pci card. After a quick search i found some drivers that should be compatible with the chipset:-
    http://www.safecom.cn/code/support/DMF.aspx?pid=316#
    I've also tried these (actually the same thing):-
    http://www.wireless-driver.com/download/other/2007-6-26/TI-TNETW1130GVF-Chipset-Driver.htm
    I loaded them up and it worked!!!!!!!!!!!!!! Both driver downloads work!!!!
    Now i've just got to find some internal antenna and wire them into the case!
    Edit: i forgot to mention that the card is being recognised as a Texas instruments 802.11g MiniPCI card in Windows Device Manager (which is no surprise as it's a Texas Instruments Chipset). Also i'm on WinXP Pro SP3.
    Message Edited by snowbum on 03-08-2009 12:48 PM
    Message Edited by snowbum on 03-08-2009 01:12 PM

    Who would have known? I wouldn't have expected a router to use a mini-PCI card.
    Message Edited by ortegaluis on 03-08-2009 12:32 PM
    \\ I do not respond to PM regarding individual tech support. Keep discussions in the forum for the benefit of others //

  • How To Install mini-pci wireless card in 1955-S805 ?

    I'm trying to install a new mini-pci wireless card in my Satellite 1955-S805. I was able to pry off the black shiny strip above the keyboard, and unscrew the two screws holding down the keyboard. But under the keyboard is a silver metal plate. There doesn't appear to be a way to get past that. Everything I've read seems to say that the mini-pci card goes under the keyboard.
    Does anyone know how to install a mini-pci card in these 1955-S805 notebooks? Or does anyone have a tech manual on this model?
    Thanks,
    Pat

    Hi Pat
    I am not sure but you have an US model. I have 1900-703 notebook. It is a European model and I had no problem to install mini-pci wireless card.
    Your unit has also wireless keyboard. Am I right?
    If you want to built in wireless card you must remove the keyboard from notebook using keyboard releases on the left and right side of your unit. After that you can see small cover on the place of keyboard and this cover is fixed with one screw. Under this small cover there is wireless card slot.

  • Need advice for deploy adf web fusion application created in Jdev11gTp4

    hello,
    need advice for deploy adf web fusion application created in Jdev11gTp4
    and it will be nice if you have helper sites
    thanks
    greenApple

    Is there something specific in TP4 that you want to use TP4 - as John suggests, it might be an idea to use the full production release (11g). As for resources for information you can check out
    [Jdev Home|http://otn.oracle.com/products/jdev] this page contains links to the developers guides and various how tos etc etc. The follownig page is also useful and is focused more to those who are less familiar with Java
    [JDev for Forms|http://otn.oracle.com/formsdesignerj2ee]
    Hope this helps and maybe if you can be more specific we can better guide you.
    Regards
    Grant

  • External antenna on mini PCI WiFi card

    Hello,
        The stock mini PCI WiFi card on the MEGA 865 has terrible range.  I can not connect to an access point beyond 20 feet.  Can an external antenna be added to the card?  Does someone sell a mini PCI WiFi with external antenna?  The new MEGA 865 PRO has an external antenna!!!!!  Where can I buy this 865 PRO WiFi card and antenna?  My PCI slot is filled and USB keys seem to have about the same range. 
         In another computer I have a D Link PCI card 802.11 a/b/g with external antenna with excellent signal at 100 feet.
    Thanks for your help!

    ahh ha! success...
    I got new Intel drivers for my wireless Mini-PCI card from the Intel site itself.
    It now is very stable...transferred more than 5gig at once without dropouts
    Only problem is that the speed is sacrificed a bit...i was getting slightly higher transfer rates with the original drivers(which came with the card).. now im getting max 2MByte/s(16Mbits/s) with these new drivers....also Windows can see the wireless network connection as "Status:Excellent"..so im pleased with the stability
    Can any1 explain how(even when 2 wireless-G devices are sitting next to each other) they can never reach 54MBit/s ??? So then 108MB/s must be an absolute load of crap ..and not even reach 54MBit/s properly
    I should be getting around 54MBit/s ..after all why say its 54MBit/s when its not ....grrrr

  • Fitting a mini pci wifi card to a T21 HELP PLEASE! :D

    hello you lovely people
    I currently have USB2.0 functionality and wifi on my T21 courtesy of a dongle and power from the 5v mouse socket
    what i want to do is put a mini pci wifi card inside my T21 so i dont have a dongle sticking out like a sore thumb
    1. is this possible or is it only the T23 you can do this too?
    2. can anyone show me the specific card and aerial i would need
    i cant find any help on the net for the T21 in particular
    hoping someone here might shed some light on this
    thanks for any help or pointers you can give
    D
    T42 - T21 - Tecra 8200 all xp

    Your best bet would be to find a complete lid with integrated wireless from a T23, and add an internal card, Broadcom 4306 or 4309 (b/g and a/b/g respectively) have been proven to work well in these machines.
    Hope this helps.
    Cheers,
    George
    In daily use: R60F, R500F, T61, T410
    Collecting dust: T60
    Enjoying retirement: A31p, T42p,
    Non-ThinkPads: Panasonic CF-31 & CF-52, HP 8760W
    Starting Thursday, 08/14/2014 I'll be away from the forums until further notice. Please do NOT send private messages since I won't be able to read them. Thank you.

  • 3rd party PCI Wireless cards

    OK, so I've decided to finally install broadband at home.
    I've had an Airport Express (AE) for several months to use when traveling, etc.
    I have a PowerBook with an Airport Extreme card in it and I use its wireless capability all the time.
    My older G4 tower (Digital Audio) does NOT have a wireless card.
    I want to install a wireless card in the G4 tower, since I suspect that will be the easiest way to get both of my computers online. I know I could buy a wired router instead, but...
    Anyways, my G4 tower would need the old original Airport card, which costs way more than the new Airport Extreme cards. So then, like my title says...
    Are there any known issues with using a 3rd party PCI Wireless card?
    For instance, Belkin's F5D7001.
    I thought I saw somewhere that Belkin supports OS X, but some people had problems in Tiger. Others may have had problems with various wireless encryption methods.
    Am I better off just biting the bullet and finding an old Airport card for $100?
    Sorry if this topic has been covered, I tried a search but didn't get much info on this particular topic.
    I am running Panther on both my machines.
    Thanks, folks!

    I am using a Belkin F5D7000 in a AGP G4 Tower. The chipset is by Ralink. Free OS X version drivers are available here:
    http://www.ralinktech.com/supp-1.htm
    While not as elegant as Airport software, of course, the driver and card work excellent.
    If you can find a wireless PCI card using the original Broadcom chip sets, just like the Airport card, then it will be recognized as an Airport card and use the Apple software. These are hard to find now however.
    Here is an excellent article on what you are trying to do:
    http://homepage.mac.com/techedgeezine/2005_0217-54g-inyourmac1.htm

  • How can I turn on the mini-PCI WiFi card on Satellite 1905-S301?

    greetz! I have installed an optional mini-PCI wireless LAN card into my Toshiba Satellite 1905-s301 notebook and turned on its power switch. MS WXP Pro SP2 recognized the hardware and installed its drivers - there is no cross or question mark next to the Atheros AR5001X+ Wireless Network Adapter in the Device Manager. However the Wireless Network Connection Manager is telling me there is no wireless adapter present. When hitting Fn+F8 a window pops up saying There is no build-in wireless LAN.
    What do I need to do to enable my optional wireless LAN mini-PCI card??? If possible, email your suggestions to my email, please!

    Hi
    You have to enable the WLan switch at the notebook side!!!
    Additional select the WLan card properties and check the Advanced tab.
    There should be an option called Radio on/off. You have to set it to on.
    greetings

  • Netgear PCI Wireless Card in a Power Mac G4

    I have a Netgear PCI Wireless Card MA311 and I'm trying to make it work in my Power Mac G4. Does anyone know of any drivers I can use or any way I can get online with it? An alternate option is the Linksys Wireless-B USB adapter (ver.2.8) that I have around here somewhere.

    Generally speaking, if you are planning on buying a PCI wireless card, do make sure that it is Mac compatible. Mac drivers for such cards or for USB wireless adapters can often be difficult or impossible to find.
    Another option could be a wireless Ethernet bridge (also known as a gaming adapter) connected to the Ethernet port. These devices (examples include Belkin F5D7330, D-Link DWL-G810, D-Link DWL-G820, Linksys WET54G, Linksys WGA600N and Netgear WGE111) do not normally require special driver software, and can be used under almost any operating system. WPA security may or may not be supported for a certain unit, so study the specifications (a firmware update can solve this in some cases).
    Jan

  • Satellite 1905-S303 PCI wireless card won't start code 10

    I've put a broadcom BCM94306PM PCI wireless card in my laptop. The laptop is equipped with antenae however one is damaged and can't be connected, these cards can work with one side only and I've even read somewhere that they can work over a short range with no antenae. My problem is device manager states that the device cannot start code 10. I have a clean install of XP Pro with SP1 (not from the original restore disc). With this in mind I suspect that there must be some Toshiba utility or driver missing to allow the card to work. Any help appreciated.

    I've downloaded drivers that others have stated are for this wireless card but I'm not able to find drivers that work. I've heard speak of a Toshiba Wireless LAN manager type of utility but I can't find any other reference to this on Toshiba site. This is not an original Toshiba wireless card, but I thought you could just plug any mini PCI device in and install drivers to suit. Is this not the case? The person that I purchased the card from says that some manufacturers prevent use of third party PCI devices. I find this unlikely. Could this card really be broken?

  • Is there example code for using Ni488 and PCI-GPIB card in non controller mode?

    Is there example code for using Ni488 and PCI-GPIB card in non controller mode?

    cymrieg,
    Your code looks good to me. What is the problem? What happens when it fails? What is the IBSTA value on the controller, and at what point in the code does it stop? What is the IBSTA value on the slave, and at what point does it stop?
    One thing is that you might not want to call IBCLR() in a loop on the device. At the beginning of the program is fine...This will send a clear command to the device and will clear out any LACS and TACS bits that might be set. Also your IBDEV call shouldn't be in a loop.
    Hope this helps, but let me know if you need more information.
    Scott B.
    GPIB Software
    National Instruments

  • Compatibility issue between MSI MS-6575E and a Linksys PCI wireless card

    Hi all,
    I have a Compaq Pavilion a249.pt with a MSI MS-6575E motherboard. I bought a Linksys PCI wireless card to access to network.
    The problem is when I plug in the PCI card the system don't boot. It remains in the HP logo and doesn't jump to system start.
    I plug the card in another computer and I get no problems...
    Do you have any idea about what can be wrong?
    Yhanks,
    CC

    Thanks for your comments and help. The problem is solved! 
    Here are the steps I took:
    1 - Try to find help in HP support team: they don't help me in any way!!!! 
    2 - Try to find help in Linksys support team: they help me isolating the problem and they didn't have any kind of error report regarding with Linksys card and MS motherboard. They told me to try the linksys card in another computer to ensure that the card was in perfect conditions. And it was.
    3 - Download of MSI motherboard manual to find any clue.
    4 - Search for a forum (like this!) and ask for help. You were the only with straight and usefull ideas  . Thanks!!!!!
    And now the solution: After checking the BIOS parameters regarding with LAN boot (you told me to disable it), I switched the card to PCI slot 3. The boot was OK.
    Again, many thanks to you all.

Maybe you are looking for

  • Indisign scripting and cross-media export - Xhtml / Dreamweaver

    Hi. I've searched for the solution but haven't found it yet. Hope you'll help me. I need to write a script which will transform all indd files in the selected folder to xhtml. But I cannot find methods for exporting files to xhtml in JS (like menu ->

  • Hp pavillion 15-b142dx usb 3.0 driver for windows 7

    Have a hp sleekbook 15-b142dx and down graded from windows 8 to windows 7. Can't find the right driver to make the two USB 3.0 ports work. The 2.0 USB port works just fine. This question was solved. View Solution.

  • Using mouse click to return image coordinates.

    Ok so I've been trying to figure out how to do this and it seems very complicated for something that really seems straightforward. Anyway. I have a camera that updates an image object on the front panel using a while loop. I have another image object

  • Why "Please sign in" when using navigation?

    I have bought regular and legal Nokia E72 from Telecom and my navigation/GPS has been working perfectly, of course without any connection to the internet.  Recently, I decided to update my maps, and now  when I want to use my navigation I must sign i

  • Count of Sales Orders ?

    Hello Experts, I have Salesorder, customer, period infobjects in the ODS. In the report I need to show the Period, Customer, Number of sales orders. Wondering if this possible. Could you please suggest me the methods to acheive this. There is one 'Co