Need advice for connecting MIDI-apparat to pc

Hello,
I have a digital piano which i want to connect to my computer. So i can use some software to record notes being played.
Which would be the most obvious way in connecting it? Just a MIDI-USB data cable (or a MIDI-Gameport. I still have an old SBLive) or do I need to buy an MIDI interface like for example a M-Audio MIDIman?
Is there anyone who could give advice in what is the easiest way? Because I dont want to spend weeks on how to get things working. I had that before with other stuff
Thanks.

A Midi-USB cable will work, but be wary of any cheap brands as this can give problems with unofficial extensions like Yamaha's XG or Roland's GS (or like above, high latency) I have an E-MU X-midi 1x1 USB Tab myself. Works fine with my keyboard, both ways, but I can't transfer any songs into the database (not sure whether it's the cable of Yamaha's crappy software).
Last edited by Cilph (2011-09-02 01:50:37)

Similar Messages

Need advice for deploy adf web fusion application created in Jdev11gTp4

hello,
need advice for deploy adf web fusion application created in Jdev11gTp4
and it will be nice if you have helper sites
thanks
greenApple

Is there something specific in TP4 that you want to use TP4 - as John suggests, it might be an idea to use the full production release (11g). As for resources for information you can check out
[Jdev Home|http://otn.oracle.com/products/jdev] this page contains links to the developers guides and various how tos etc etc. The follownig page is also useful and is focused more to those who are less familiar with Java
[JDev for Forms|http://otn.oracle.com/formsdesignerj2ee]
Hope this helps and maybe if you can be more specific we can better guide you.
Regards
Grant

Need Information For Connecting Access point to WLC 4402

Hi Friends
I need Some information for Connecting my New Access point ( Cisco AIRLAP 1242AG) with WLC(4402) Controller
In our network set up we have two WLC(4402) we needs to Connect this New Accesspoint To one of our WLC
My Access point is brand New. I need to Know what all i have to do inorder to connect this AP to the controller (from Acesspoint perspective & WLC perspective)
I need to Know what I need to do in AP to connect to the Controller
Do i need to Assign Static IP Address forAP or after connecting to the switch it automatically gets ip from DHCP and regsiter with controller??
Do i Need to Configure my AP with default gateway(the switch to which is connected ?) & DO i need to configure the AP with Controller Ip address ??
Pls Assist
Regards
Safwan

Hi Scot...
We tried Connecting the Access Point yesterday, but it failed....
We are using Cisco 3500 Access point ...
when we connected , first it automatically got an ip address using DHCP but following error occurred
P70ca.9bd5.77c6#
AP70ca.9bd5.77c6#
AP70ca.9bd5.77c6#
Not in Bound state.
*Mar 1 00:13:56.539: %CAPWAP-3-ERRORLOG: Invalid event 38 & state 2 combination
*Mar 1 00:13:56.555: %DHCP-6-ADDRESS_ASSIGN: Interface GigabitEthernet0 assigne
d DHCP address 10.50.11.26, mask 255.255.0.0, hostname AP70ca.9bd5.77c6
*Mar 1 00:14:04.564: %CAPWAP-3-UNSUPPORTED_WLC_VERSION: Unsupported version 6.0
.182.0 on WLC USSTLController01
*Mar 1 00:14:14.564: %CAPWAP-3-UNSUPPORTED_WLC_VERSION: Unsupported version 6.0
.182.0 on WLC USSTLController01
*Mar 1 00:14:24.564: %CAPWAP-3-UNSUPPORTED_WLC_VERSION: Unsupported
version 6.0
.182.0
version 6.0
.182.0
on WLC USSTLController01
version 6.0
.182.0
Then I COnfigured Ap with Static ip address & default gateway & controller Ip but tht too didnt work...
.182.0 on WLC USSTLController01
AP70ca.9bd5.77c6>
AP70ca.9bd5.77c6>
AP70ca.9bd5.77c6>
AP70ca.9bd5.77c6>
*Mar 1 00:13:40.908: %CDP_PD-2-POWER_LOW: All radios disabled - NEGOTIATED WS-C
3750X-48P (e05f.b907.9a20)
AP70ca.9bd5.77c6>
AP70ca.9bd5.77c6>
AP70ca.9bd5.77c6>en
Password:
AP70ca.9bd5.77c6#
*Mar 1 00:13:48.033: %CAPWAP-3-DHCP_RENEW: Could not discover WLC using DHCP IP
. Renewing DHCP IP.
AP70ca.9bd5.77c6#
AP70ca.9bd5.77c6#
AP70ca.9bd5.77c6#
P70ca.9bd5.77c6>
*Mar 1 00:13:40.908: %CDP_PD-2-POWER_LOW: All radios disabled - NEGOTIATED WS-C
3750X-48P (e05f.b907.9a20)
AP70ca.9bd5.77c6>
AP70ca.9bd5.77c6>
AP70ca.9bd5.77c6>en
Password:
AP70ca.9bd5.77c6#
*Mar 1 00:13:48.033: %CAPWAP-3-DHCP_RENEW: Could not discover WLC using DHCP IP
. Renewing DHCP IP.
I also Need to Know Cisco Access point 3500 can be associated with WLC 4402 ( version 6.0.182.0) ??
Pls Advice How to proceed further

Need advice for installing flex application in touch screen Kiosks

Hello,
We have a requirement in one of our project to create touch screen interfaces and I am intending to user Adobe Flex for the development and run them in Adobe Air because, definitely it saves development time and great look and feel.
However, I need advice on how to connect the application to a touch screen events like we do on Keyborad and mouse events like, click() or onFocus etc.
Please advice.
Best Regards,
Jai Kishan Shah

Bar Code Scanners are no different than keyboards in my experience. It just sends the text to whatever application is open. Integrating it with Flex requires no effort. You just have to be sure that Flex is the current application and the field you want to put the data in is given focus.
In a point of sale application with very specific use case and limited interface, it is easy to force the app to give focus to the input field that needs to accept your input.
Credit card swipers work the same way.
I don't know about a weighing scale, but I bet it is very similar. If not, you may want to use Java for scale integration and then use Merapi to integrate with the Java applet.

Need advice for escalating warranty repair

hi all,
around easter I noticed my daughters 2007 C2D macbook(white) developing hairline cracks in the backcase near three stress points, near the tabs on both sides that hold it off the topcase and in the middle from constant opening of the machine. the local genius said applecare would cover it but she needed it for school so I delayed sending it in. My Bad. She comes home with a chip in the topcase and about 12-14 dead pixels in the display. Sent it off for repair and Apple said the screen showed signs of abuse( not completely out of the question) due to one section that seems to have been "bruised" and is leaking. Unless she or a spurned lover took an icepick to the screen I don't see how she caused over a dozen pixels scattered all over the display to fail but I am not an engineer. The problem is they will not perform the case repair unless I agree to the $800 LCD replacement. The reason being they can't perform a partial repair. The way I heard it is until I replace the LCD at my expense apple in unable to do any warranty repairs and i have 14 Months of Applecare left. My local apple store is closed for renovations or I would go there where they recognize me for advice. Powerbook Medic quotes $250 for screen replacement. should I do that and then resubmit the machine to Apple for case repair? Is there a Phone number for customer service other than tech support I could try to escalate this case with? The only one I see is the Apple Store CS for orders and such. Anyone have any thoughts or recommendations?
Thanks,
Frank

Is there a Phone number for customer service other than tech support
You call the support line and asked to be transferred to customer relations.

Need advice for wireless iTunes access (have router already)

I'm having a hard time sifting through all the info to find the best solution. I have a MacBook Pro that I'll soon be upgrading to Lion from Snow Leopard, as well as an iPhone, with a second iPhone soon to enter the family. We also plan to get an iPad. We actually have an older iMac that we won't be upgrading, so we're going to move our iTunes library from the iMac over to the MacBook (basically turning the MacBook into our primary computer). We want to be able to play iTunes without having to keep the MacBook plugged into wired speakers. That seems a bit pointless.
We have a wireless router already (a D-Link), so I don't need AirPort Express to act as a router. (We have a 1 bedroom condo, really no reason to extend the network or anything like that.) We have a printer that works wirelessly with the MacBook already. All I'm really trying to figure out is the best way to set it up so that we can have iTunes on the MacBook, playing over speakers (either the ones we currently have our iMac plugged into, or our stereo speakers that we have our TV setup with). Ideally if we could do the same from the iPhone and (future) iPad, that would be great, too.
Does it make any sense for us to get an AirPort Express to do this, or would it just be more straightforward to get wireless speakers that can work over Bluetooth (like the Creative D200 ones in the Apple store)? I feel like the AirPort has the potential to be overkill for our usage, especially since I can't seem to figure out if you can use AirTunes with an iPad, and we don't need it for the wireless printing functions.
Any advice would be appreciated. Thanks in advance!

Thanks Leo! Yeah, I was confused about the 2500 series too because they push the Flex 7500 so much as the "real" solution.
Now that I'm looking in the right spot, it looks like NCS Prime Infrastructure is for the serious folks and we could probably get away without it, right? So that would leave the access points, the controller, and the basic network stuff.

Need Advices for Nokia Asha 503

Dear SIr,
Please give me advices for two major things for Nokia Asha 503 purchase.
1- Good Benifets
2- Bad Benifets
Your prompt reply/partispation will be appriciated.
Arshad Mahmood
Lahore Pakistan

look at gsm arena for advice and reviews good and bad pointed out there but only from a comparison perspective.All phones have good and bad points each persons needs is different.
If i have helped at all a click on the white star below would be nice thanks.
Now using the Lumia 1520

Need help for connecting internet in solaris 10

Hello ,
I am new to Sunsolaris, recently i installed solaris 10 in my HP laptop. In my lap vista is the host and i installed Virtual box 3.0. Inside virtual box i installed solaris. My problem is not able to connect to internet. Iam using a wireless modem for connecting internet which is configured in vista. Solaris is not identifying wireless modem. Virtual box host adaptor is the ethernet iam using. I want to connect solaris to vista and access the internet( i have a guest open suse Linux in my lap, this is able to connect to internet through vista) can anybody give me a solution to get internet in solaris(ie through vista)
Biju

Hi,
What is the gateway used by Solaris. Please send the result of ifconfig -a on the Sun OS.
Sunil.

Need advice for SAP installation on External Hard disk

Hi Gurus,
I have HP laptop with configuration of 512 MB RAM and 50 GB hard disk...i recently bought 250 GB segate external hard disk for SAP installation...My doubt here is if i install SAP in external hard disk and will it work properly if i connect my laptop?
ur advice is much appreciated
Regards
Dinesh

Hi Dinesh,
I have installed SAP on external harddisk.
And it will work properly.
But i think you need to increase your RAM.
After installation, please keep in mind one thing.
You will have to attach your external harddisk before your machine starts, because your OS will be in internal harddisk, so SAP and oracel services won't be able to run without external hard-disk.
and in case you attach after system startup, please start all services.
Regards,
Payal Patel

Need advice for future design and hardware I should purchase now.

I was wondering if someone could assist me in making a decision on where I should take the future design of my network. Currently the design has no redundancy and I've been told recently that my company has a bit of money to spend and that it needs to spend it within the next 2 weeks. I am fairly new to the company so haven't been able to really think about future redundant designs nor have I studied much about designing networks. There are about 200-300 people that may be using my network at once, all users aren't at the location in question but they may be asking for resources from our servers.
I've included a basic design of the "core" of my network and would like any suggestions for creating redundancy in the future and also optimizing the way data travels to our servers. Do people generally have redundant Layer 3 switches for the core in small networks such as mine? I will be replacing the 2811 since it only has 100Mbps connections and was thinking, perhaps replace this with a Layer 3 switch with the plan to have another identical Layer 3 switch installed to offer redundancy in the future.
Also, would it be a good idea to move the servers into a vlan on the core? Thanks for any advice on what I should be purchasing now with plans for redundancy being implemented over a year. -Mark

40k Can go pretty quick depending on the scope. Your server farm especially should be dual-homed capable of surviving link, hardware, routing, and software failure.
It's going to be best practice your server farm be in it's logical subnet, so failover mechanism can be controlled routing protocols, as opposed to FHRP's such as HSRP/VRRP/GLBP. Especially since you adjust routing timers to sub-second convergence.
Budget will be the primary limitation (as it always it) but ideally dual 6500's running VSS and FWSM would be the ideal way. Data centers should be designed with high availability in mind, hence the need to 2x devices.
Depending on the size of the SAN/Virtual infrastructure Nexus might want to be considered but you will chew up 40k before you know it.
Also make sure the server farm is scaled properly. Your server farms should be oversubscribed in a much higher ratio compared to your access layer.
CCNP, CCIP, CCDP, CCNA: Security/Wireless
Blog: http://ccie-or-null.net/

Need advice for installing win7 64 bit via oem dvd builders disk.

My current system = late 2009 iMac. I am wanting to install Win7 Pro in Boot Camp. I have been told that by using the lesser cost system builders disk there should be know significant glitches providing for the downloads of system files to fat 32 USB stick.
Question #1 How large should the boot camp partitions be for the install?
Question#2 How large shoud the USB stick be? Can a directly connected firewire drive be used instead?
Question#3 Any other advice will be greatly appreciated with regards to this software install.
Question#4 Is it true that I will need a wired mouse for the install? and will a apple wirless mouse work with win7 in boot camp?
Thanks!

1. 60GB or greater
2. 2GB or greater
3. Read the directions thoroughly and backup before you start.
4. You should have a wired mouse and keyboard available, just in case.
4b An Apple Bluetooth Mouse (Magic Mouse) will work with Windows once Windows is installed completely.

Need Advice-Adobe Connect and tracking student grades

I know that Adobe Connect can be used as a LMS, I need to know how to track grades for each student. Also each student has to pay for the class, How can I limit or control who logs in to the class. I dont want the link to be passed around for any one to use. I,ll take all the help I can get. Thanks for any help or advice.

The question is, how do I "track each individuals progress through your training, and you will be able to pull reports that show that." When I have the reports published to Adobe Connect, all I see are aggregate results. I can find no way to get individual results.

Need advice for starting a Managed Cloud Service for Small Businesses

I hope this is in the right forum. I have done a lot of research and searching but havent found anything that specifically answers, in total, what I am wanting to accomplish. I live in a small town and want to start a Managed Cloud Services for
small to small-medium business in my area (2-30 users for each business). I want to market this to have businesses replace their in-house server(s) to virtual ones I would host in a local Data Center with my own equipment that I would maintain. I
am just starting off so I don't have any clients I do this for currently, but I get asked about this frequently. I want to run a 2012 R2 Domain Controller and a Hyper-V 2012 R2 server. The virtual servers I will host are going to be for AD, RDS,
FTP, and files. Software examples that people are going to be using these virtual servers for are Quickbooks, Sage Accounting, Remote Desktop or RemoteApp, custom CRM or small database software, Office 2013, etc. No Exchange currently but will
probably configure something for that in the future (maybe run 1-3 virtually for now if someone asks, but will only do it if the user base is fairly small ~under 10 users). I only have 1 static IP to work with over a 100Mbps connection up and down.
For hardware, I am figuring something along the lines of this:
(1) 1U, single CPU w/2-4 cores, 8GB, 2x73GB SAS 10k RAID 1, Dual PSU, running Windows Server 2012 R2
Domain Controller
(1) 2U, 2x 8-core Xeon ~2.6Ghz, 80GB RAM, 8x600GB SAS 15k in Raid 10 for Storage (VHDX files, etc), RAID 1 small Basic drives (or USB stick) for OS, Dual PSU, Quad GB Nic which I can use for load balancing/teaming, Hyper-V
2012 R2
Hyper-V Virtual Server
(1) GB Unmanaged Network Switch & (1) Cisco 5510 Firewall
Most of my questions are about the best way to configure this. I am planning on managing my Hyper-V from the physical Domain Controller server. Each virtual server will have RDS & (possibly) AD services on a single server.
1) I want to replicate the physical Domain Controller. Should I get another server or just virtualize the replica in Hyper-V? I understand that if the Hyper-V goes down, so does my DC replica.
2) Should I use my Domain Controller to manage ALL users on each virtual Server, by creating separate Organizational Units for each business?
3) Should I setup my domain controller with Hyper-V management and then each Virtual Server I setup be a separate domain (Ex. mydomain.local, business1.local, business2.local, etc)? Each one has no connection to any
other, completely seperate. Or should I do subdomains (business1.mydomain.local).
4) What I have read is that Subdomains are a pain to manage with user rights, etc. I want to keep each server complete separated from one another over a network connection, I suppose the VLan through Hyper-V options
do this? I dont want wondering users to stumble upon another businesses files (I know they would probably be prompted with a login for that business/domain).
5) For each virtual server, I want to create and have an HTTP subdomain point to that server from my domain name. (Ex: business1.mydomain.com, business2.mydomain.com, etc.) I want them to be able to have access to
only their RemoteApps or be able to type that address in their Remote Desktop program as the host name. This would be for viewing the RemoteApp login page and RemoteApps for that business over HTTP/S through a browser.
6) If I do not have separate DC's in each virtual and my main DC manages each one, is their a way to connect up each companies RemoteApps using a single site that only shows what they are assigned to based upon their login?
(Ex. http://login.mydomain.com which then shows that user what they are assigned on their own virtual server)
7) Since each business will use the same ports for RemoteApp (443) & RDC (3389 unless I change it), how would I setup the subdomains to point to their correct server and not overlap for mess with any of the other servers
since its all over 1 static WAN IP for all servers. Thats why I figured setting up IIS subdomains would solve this.
8) For backups or Hyper-V replication, is it better to have software that backs up the ENTIRE Hyper-V server (Acronis Advanced Backup for Hyper-V) as well as replication or just backups? Or should I do separate file
backup on each virtual with a replica? Can a replica be a slower server since its just a backup? (Ex. 1x 8 core, 80GB, 8x600GB 10k SAS)
9) For the servers that will be using FTP, can I again rely on the subdomains to determine which server to connect to on port 21 without changing each FTP servers ports? I just want each business/person to type in
the subdomain for their business and it connect up to their assigned FTP directory over port 21.
10) If the physical DC manages DNS for all Virtual servers, can I forward sub domain requests to the proper virtual server so they connect to the correct RemoteApp screen etc. Again all I have is 1 IP.
I hope all of these questions make sense. I just want every business to be independent of each other on the Hyper-V, each on their own virtual server, all without changing default ports on each server, each server running RDS, (possibly) AD, (a few) FTP,
and all over a common single WAN IP. Hoping subdomains (possibly managed through IIS on the physical DC) will redirect users to their appropriate virtual server.

If you really want to run your own multi-tenant service provider cloud, Microsoft has defined the whole setup needed.
They call it Infrastructure as a Service Product Line Architecture. You can find the full documentation here -
http://blogs.technet.com/b/yuridiogenes/archive/2014/04/17/infrastructure-as-a-service-product-line-architecture.aspx
There are several different ways of configuring and installing it. Here is a document I authored that provides step-by-step instructions for deploying into a Cisco UCS and EMC VSPEX environment -
http://www.cisco.com/c/dam/en/us/td/docs/unified_computing/ucs/UCS_CVDs/ucs_mspc_fasttrack40_phase1.pdf
This document contains the basic infrastructure required to manage a private cloud. I will soon be publishing a document to add the Windows Azure Pack components onto the above configuration. That is what would more easily provide a multi-tenant
experience with a Azure look and feel. It is not Azure, but the Azure pack is a series of applications, some of which came from Azure, the provides Azure-like capabilities only in a service provider type of environment.
Whether you use my document or not (which has actually corrected errors found in the Microsoft documentation), you should take a look at it to see what it takes to put something like this up, if you are really serious about it. It is not a small undertaking.
It requires a lot of moving pieces to be coordinated. Yes, my document is designed to scale to a large environment, but you need the components that are there. No need re-inventing the wheel. Microsoft's documentation is based on a lot of
real hands on experience of their consulting organization that has been doing this for customers for years. This one is also know as Fast Track 4. I've done 2 (2008 R2) and 3 (2012), also and it just keeps getting more complicated based on customer
demands and expectations.
Good luck!
. : | : . : | : . tim

Need advice for an application that restricts access to other applications using a smart card

Hello everybody,
I am developing a system that uses a smart card reader attached to a USB port of a PC.
What the system should provide is:
When computer boots up and shows the users login screen, a user, previously registered, can use his smart card to access the system, instead of entering his password
Once the user is logged in, when he tries to launch an application, which has previously marked as "secured", a dialog box is shown indicating that the user has to present his smart card. If the smart card has access to the application, the application
is launched, otherwise an error message is shown to the user and the application is not executed.
I develop in C++ and C#. I have already created a library (in Visual C++) that manages the smart card reader and provides the card presented to it.
Now I am developing the applicastion (in C#) that will configure the security (assigning cards to users and applications).
Concerning this, I have 2 questions regarding each point above:
Is it possible to create the centralized application that lists all users and allows to assign cards to them? Then, when the users login screen is shown, the system must access that data before logging in, so that it can check which card was presented and
what user it corresponds to. I have seen in laptops, that have embedded fingerprint readers, a user must login to his account first and then he can register his fingerprints. In fact, what I need to do is something similar but with smart card reader instead
of fingerprint reader. So, perhaps, user must login into his account first and then he will be able to add his card and store that information somewhere (in windows registry maybe).
How can I launch my application when other application is executed but before its interface is actually shown? this is similar to what antivirus programs do, because they check the executable before it is actually ran. What is the best method to address
the application? by executable file name? process name? or other? if the best is by process name, how can I know the process name without actually running the application?
Well, that is all what I need to do. Please advice regarding this subject.
I look forward to hearing from you,
Best regards,
Jaime
Powered by C++

> what was the guidance?
1. Research other software that does similar things (not just exactly the same) as you need. If you like something in their solutions, copy it :)
The only software I know that does that is an antivirus, but I am unlucky to find some code in c++ that allows to intercept the program execution before actually executing it.
2. If a kernel driver would fit in your solution, go for it (google for what is available for free, or find a consultant to write it for you).
There are a lot of information about kernel drivers, but the question is, is that really the solution?
Otherwise, you can just hide the application from user's reach and substitute the executable in shortcuts, etc. to run your program instead.
Definetly this is not the way to go
What is the best method to address the application? by executable file name? process name? or other?
By executable file name, like in the Windows Applocker, I think. Processes do not have names (they are artifact of Task manager and debugging tools, to represent the processes for user somehow). Or, only by the filename part of the full path.
I agree with that
if the best is by process name, how can I know the process name without actually running the application?
When the user runs the application, the driver will detect this and do its magic.
I have found this page: http://stackoverflow.com/questions/3556048/how-to-detect-win32-process-creation-termination-in-c. They mention WMI, but I will study it tommorow... it is so late for today :-)
Regards,
-- pa
Regards
Jaime
Powered by C++

Need help for connecting Ms Acces with java Swing in Mac OS

Hi all,
i need to connect to Ms Access in MAc os through my java swing program.
Is it possible for accessing Ms access through dsn in Mac OS.
If Possible which driver shall i use for Establishing Connection with MS Access in Mac OS.
Suggestion is needed urgently.
Can anybody help me out regarding this..
Thanks in advance.
Regards,
sreand

if I don't find a better solution I'll try your 2nd option but what do you mean by "combo" update?
My understanding is to simply insert the OS 10.5 installation CD, reinstall the OS and the just keep updating it via the OS SSoftware update panel and stop untill I see the scary Java 8 update. Is that what you meant?
While you can do it that way, the combo update picks up operating system updates through a collection of releases. When dealing with operating system upgrades, I've found using the combo updates to be more reliable than Software Update, as sometimes Software Update doesn't apply updates correctly, and weird things can happen. Doesn't happen often though, thankfully.
So the OS X 10.5.5 Combo update contains all updates between 10.5.0 and 10.5. The 10.5.8 combo update contains the updates from 10.5 thru 10.8. Here are the updates:
10.5 combo update: http://support.apple.com/kb/DL692
10.8 combo update: http://support.apple.com/kb/DL866
If you go down the combo path, repair permissions before and after doing each update. Then do Software Update for any other non-OS X updates, and don't apply the Java Update 8.

Need advice for connecting MIDI-apparat to pc

Similar Messages

Maybe you are looking for