Need advice for future design and hardware I should purchase now.

I was wondering if someone could assist me in making a decision on where I should take the future design of my network. Currently the design has no redundancy and I've been told recently that my company has a bit of money to spend and that it needs to spend it within the next 2 weeks. I am fairly new to the company so haven't been able to really think about future redundant designs nor have I studied much about designing networks. There are about 200-300 people that may be using my network at once, all users aren't at the location in question but they may be asking for resources from our servers.
I've included a basic design of the "core" of my network and would like any suggestions for creating redundancy in the future and also optimizing the way data travels to our servers. Do people generally have redundant Layer 3 switches for the core in small networks such as mine? I will be replacing the 2811 since it only has 100Mbps connections and was thinking, perhaps replace this with a Layer 3 switch with the plan to have another identical Layer 3 switch installed to offer redundancy in the future.
Also, would it be a good idea to move the servers into a vlan on the core? Thanks for any advice on what I should be purchasing now with plans for redundancy being implemented over a year. -Mark

40k Can go pretty quick depending on the scope. Your server farm especially should be dual-homed capable of surviving link, hardware, routing, and software failure.
It's going to be best practice your server farm be in it's logical subnet, so failover mechanism can be controlled routing protocols, as opposed to FHRP's such as HSRP/VRRP/GLBP. Especially since you adjust routing timers to sub-second convergence.
Budget will be the primary limitation (as it always it) but ideally dual 6500's running VSS and FWSM would be the ideal way. Data centers should be designed with high availability in mind, hence the need to 2x devices.
Depending on the size of the SAN/Virtual infrastructure Nexus might want to be considered but you will chew up 40k before you know it.
Also make sure the server farm is scaled properly. Your server farms should be oversubscribed in a much higher ratio compared to your access layer.
CCNP, CCIP, CCDP, CCNA: Security/Wireless
Blog: http://ccie-or-null.net/

Similar Messages

Arch workflow design advice for a designer?

Sorry for the ambiguous title, I couldn't figure out what to call this post.
I'm new to Arch, though not Linux, and I must say, this is an amazing distro (I'm on the 64bit version). Dead simple, super fast, and nearly as flexible as a Gentoo system (that can use binaries!). Pacman is rockin'.
I'm a designer by trade: Web, video, and image. And I STILL boot into Windows for important tasks like Flash work, video work, and ftp work. I would obviously like to reduce that dependency, though there is little hope in the video department, right now.
But for web, I see no reason I couldn't do it all in linux. But I'm not sure how to go about it. Here is the workflow I need, and I was wondering if you could advise how I might set up such a system (I have just a base system with Gnome installed right now):
* WYSIWYG html and CSS editting (NVU/Kompose is fine for html, but NOT for CSS) for the design phase
* A way to output image slices with html (does GIMP do this?)
* Accurate web fonts
* Reliable ftp, preferably one with drag n' drop functionality (I use filezilla on Windows, but I think the linux version lacks the drag n' drop)
It's not a real complicated workflow, I just need to save time wherever possible because I need to work very fast. In windows, it's like having a ball and chain strapped to your leg, but it does work. With linux, I will very much appreciate access to terminal and file management advantages.
I'm not stuck on Gnome, I just like the simplicity. I'm mainly interested in speed and efficiency (NOTE efficiency... I like time savers and fluxbox always seems to add clicks to my tasks). Let me know what you think! I may be able to move my flash work over with a little help from VirtualBox too, but I think I'm stuck when it comes to video . Thanks for any advice you might have!

No offense, but using WYSIWYG to design web pages doesn't sound very professional imo. They just don't offer the control that one would want with the code. I have tried a few (Frontpage, Dreamweaver, NVU, Bluefish, ...) and they all suck. They just don't do what you want it to. You drag something or add some formatting and it just messes up the code. It's better to just use a text editor and view the results in browser. Maybe that's slow or inefficient for you, but I find that's the best way to do it.
As for image slicing, I find that annoying as well. In Photoshop I never really liked the way it worked. I sliced a few images and then trashed most of the others. I tend to go for simple designs and focus on making it mostly CSS, so when I slice images it's usually a 1px wide/high gradient which would get repeated. I don't need image slicing for that. As for graphic intensive sites... well... really, you should review that. People still have slow connections and having a lot of graphics is just bad, even if your client wants it. You might as well go with flash, and waste some more bandwidth
If you really want to do it though, I think Inkscape is quite a nice tool. I do all my designing in it, and though I don't use slicing, you can do it quite easily (though it's a bit hackish) by adding a layer and creating transparent rectangles around the stuff you want, then just select the rectangle and export it. I'm not sure if there's a more automatic way - there are plenty of tutorials.
The MS-fonts should be fine, I just want to know that I am looking at an accurate representation of what I my windows customers will see.
Fonts won't help you much there. You know most people use IE, so you need to view the website in IE regardless, and that means you need Windows (I think wine uses some weird IE version which uses gecko). Maybe there's some good Linux alternative for viewing stuff in IE, but I just view it on Windows. Also the font shouldn't change the general layout of the site... I don't see how that would be a problem unless it's some weird font that not everyone has, in which case you'd use @font-face anyway...

What is the Best Power MAC G5 for Graphic Design and Video Edit

I need the Best Power MAC G5 Processor CPU
and Ram HDD Graphic card for Graphic Design and Video Edit
and the name of the Processor
how much the price

Hi GabreilKnight;
You are aware that the PowerMac G5 is no longer being produced hence if you find one it will be on the used market?
For what you are looking at doing I would suggest that you consider a Mac Pro instead.
Allan

About ODMr for product design and development.

how ODMr can be used to find patterns of desingers' behaviors when they create new design for a product?
In general, designers tend to change their design to satisfy needs required by customers or technicians.
Is ODMr able to find which design parameters are most contributive to the performance of a product?
Is it ok to use Decision Tree if I have hypothesis space for desing parameters and training data?
I want to use ODMr to improve R&D process.
But I'm sure it is a smart way to use ODMr for product design and development.
If anyone has good idea or other algorithm available for that field, please let me know~~
Have fun~!

I would think if you are going to run both of those programs at the same time, or even one at a time, a system with discrete graphic would be a better fit for you.
The next question is if you are doing web design do you really need a retina display. At this time only apple has them so everyother computer viewing your web designs wouldn't see the difference, if there is any to begin with.

Need advice for deploy adf web fusion application created in Jdev11gTp4

hello,
need advice for deploy adf web fusion application created in Jdev11gTp4
and it will be nice if you have helper sites
thanks
greenApple

Is there something specific in TP4 that you want to use TP4 - as John suggests, it might be an idea to use the full production release (11g). As for resources for information you can check out
[Jdev Home|http://otn.oracle.com/products/jdev] this page contains links to the developers guides and various how tos etc etc. The follownig page is also useful and is focused more to those who are less familiar with Java
[JDev for Forms|http://otn.oracle.com/formsdesignerj2ee]
Hope this helps and maybe if you can be more specific we can better guide you.
Regards
Grant

I want to set up 5 different ipods to sync from one library, but want to be able to control what is synced to each ipod and have it remember that for future synching and just look for new songs and not sync all the other music in the library

I want to set up 5 different ipods to sync from one library, but want to be able to control what is synced to each ipod and have it remember that for future synching and just look for new songs and not sync all the other music in the library

Click here for options.
(58961)

I got this error message when I want to activate the CS6. The error message is "We are unable to validate this serial number for CS6 Design and web Premium. Please contact "Customer Support ""

I got this error message when I want to activate the CS6. The error message is "We are unable to validate this serial number for CS6 Design and web Premium. Please contact "Customer Support ""

Hi islandschool,
Please try the suggestion given in the link:- http://helpx.adobe.com/creative-suite/kb/unable-validate-serial-number-ccm.html
Regards,
Sarika

Hi we have apple credentials for downloading OS and creating Provisioning profiles. Now we are trying to upgrade the Mac OS 10.7.3 version. do we need should buy this version from appStore. or can it be download from the apple site for free? Many thanks

Hi we have apple credentials for downloading OS and creating Provisioning profiles. Now we are trying to upgrade the Mac OS 10.7.3 version. do we need should buy this version from appStore. or can it be download from the apple site for free? Many thanks in advance!

Whether you need to buy Mac OS X 10.7.3 depends on what version of OS X you have now.
If you have OS X 10.6.x or lower it is a paid upgrade from the Mac AppStore.
If you have OS X 10.7.x it is a free upgrade you get using Software Update on your Mac.

Hi i need material for module pool and alv's.

hi
i need material for module pool and ALV's(not object oriented) if any one have pls do send that to my
ID [email protected]
thanx in advance.

Hi
Check the below link:
http://wiki.ittoolbox.com/index.php/FAQ:What_is_module_pool_program_in_abap%3F
http://help.sap.com/saphelp_46c/helpdata/en/35/26b1aaafab52b9e10000009b38f974/content.htm
http://sap.mis.cmich.edu/sap-abap/abap09/sld011.htm
http://sap.mis.cmich.edu/sap-abap/abap09/index.htm
http://www.geocities.com/ZSAPcHAT
http://www.allsaplinks.com/files/using_table_in_screen.pdf
http://help.sap.com/saphelp_webas630/helpdata/en/9f/db9cdc35c111d1829f0000e829fbfe/content.htm
http://www.sapdevelopment.co.uk/dialog/dialoghome.htm
http://www.sap-img.com/
http://help.sap.com/saphelp_46c/helpdata/en/08/bef2dadb5311d1ad10080009b0fb56/content.htm
http://www.sapgenie.com/links/abap.htm
http://help.sap.com/saphelp_nw04/helpdata/en/c9/5472fc787f11d194c90000e8353423/frameset.htm
You can also check the transaction ABAPDOCU which gives you lot of sample programs.
Also you can see the below examples...
Go to se38 and give demodynpro and press F4.
YOu will get a list of demo module pool programs.
One more T-Code is ABAPDOCU.
YOu can find more examples there.
See the prgrams:
DEMO_DYNPRO_TABLE_CONTROL_1 Table Control with LOOP Statement
DEMO_DYNPRO_TABLE_CONTROL_2 Table Control with LOOP AT ITAB
http://www.geocities.com/ZSAPcHAT
http://www.allsaplinks.com/files/using_table_in_screen.pdf
ALV
ABAP List Viewer
The common features of report are column alignment, sorting, filtering, subtotals, totals etc. To implement these, a lot of coding and logic is to be put. To avoid that we can use a concept called ABAP List Viewer (ALV).
This helps us to implement all the features mentioned very effectively.
Using ALV, We can have three types of reports:
1. Simple Report
2. Block Report
3. Hierarchical Sequential Report
There are some function modules which will enable to produce the above reports without much effort.
All the definitions of internal tables, structures and constants are declared in a type-pool called SLIS.
1. SIMPLE REPORT.
The important function modules are
a. Reuse_alv_list_display
b. Reuse_alv_fieldcatalog_merge
c. Reuse_alv_events_get
d. Reuse_alv_commentary_write
e. Reuse_alv_grid_display
A. REUSE_ALV_LIST_DISPLAY : This is the function module which prints the data.
The important parameters are :
I. Export :
i. I_callback_program : report id
ii. I_callback_pf_status_set : routine where a user can set his own pf status or change the functionality of the existing pf status
iii. I_callback_user_command : routine where the function codes are handled
iv. I_structure name : name of the dictionary table
v. Is_layout : structure to set the layout of the report
vi. It_fieldcat : internal table with the list of all fields and their attributes which are to be printed (this table can be populated automatically by the function module REUSE_ALV_FIELDCATALOG_MERGE
vii. It_events : internal table with a list of all possible events of ALV and their corresponding form names.
II. Tables :
i. t_outtab : internal table with the data to be output
B. REUSE_ALV_FIELDCATALOG_MERGE : This function module is used to populate a fieldcatalog which is essential to display the data in ALV. If the output data is from a single dictionary table and all the columns are selected, then we need not exclusively create the field catalog. Its enough to mention the table name as a parameter(I_structure name) in the REUSE_ALV_LIST_DISPLAY. But in other cases we need to create it.
The Important Parameters are :
I. Export :
i. I_program_name : report id
ii. I_internal_tabname : the internal output table
iii. I_inclname : include or the report name where all the dynamic forms are handled.
II Changing
ct_fieldcat : an internal table with the type SLIS_T_FIELDCAT_ALV which is
declared in the type pool SLIS.
C. REUSE_ALV_EVENTS_GET : Returns table of possible events for a list type
Parameters :
I. Import :
Et_Events : The event table is returned with all possible CALLBACK events
for the specified list type (column 'NAME'). For events to be processed by Callback, their 'FORM' field must be filled. If the field is initialized, the event is ignored. The entry can be read from the event table, the field 'FORM' filled and the entry modified using constants from the type pool SALV.
II. Export :
I_List_type :
0 = simple list REUSE_ALV_LIST_DISPLAY
1 = hierarchcal-sequential list REUSE_ALV_HIERSEQ_LIST_DISPLAY
2 = simple block list REUSE_ALV_BLOCK_LIST_APPEND
3 = hierarchical-sequential block list
REUSE_ALV_BLOCK_LIST_HS_APPEND
D. REUSE_ALV_COMMENTARY_WRITE : This is used in the Top-of-page event to print the headings and other comments for the list.
Parameters :
I. it_list_commentary : internal table with the headings of the type slis_t_listheader.
This internal table has three fields :
Typ : H header, S selection , A - action
Key : only when typ is S.
Info : the text to be printed
E. REUSE_ALV_GRID_DISPLAY : A new function in 4.6 version, to display the results in grid rather than as a preview.
Parameters : same as reuse_alv_list_display
This is an example for simple list.
2. BLOCK REPORT
This is used to have multiple lists continuously.
The important functions used in this report are:
A. REUSE_ALV_BLOCK_LIST_INIT
B. REUSE_ALV_BLOCK_LIST_APPEND
C. REUSE_ALV_BLOCK_LIST_HS_APPEND
D. REUSE_ALV_BLOCK_LIST_DISPLAY
A. REUSE_ALV_BLOCK_LIST_INIT
Parameters:
I. I_CALLBACK_PROGRAM
II. I_CALLBACK_PF_STATUS_SET
III. I_CALLBACK_USER_COMMAND
This function module is used to set the default gui status etc.
B. REUSE_ALV_BLOCK_LIST_APPEND
Parameters :
Export :
I. is_layout : layout settings for block
II. it_fieldcat : field catalog
III. i_tabname : internal table name with output data
IV. it_events : internal table with all possible events
Tables :
i. t_outtab : internal table with output data.
This function module adds the data to the block.
Repeat this function for all the different blocks to be displayed one after the other.
C. REUSE_ALV_BLOCK_LIST_HS_APPEND
This function module is used for hierarchical sequential blocks.
D. REUSE_ALV_BLOCK_LIST_DISPLAY
Parameters : All the parameters are optional.
This function module display the list with data appended by the above function.
Here the functions REUSE_ALV_FIELDCATALOG_MERGE, REUSE_ALV_EVENTS_GET, REUSE_ALV_COMMENTARY_WRITE can be used.
3. Hierarchical reports :
Hierarchical sequential list output.
The function module is
A. REUSE_ALV_HIERSEQ_LIST_DISPLAY
Parameters:
I. Export:
i. I_CALLBACK_PROGRAM
ii. I_CALLBACK_PF_STATUS_SET
iii. I_CALLBACK_USER_COMMAND
iv. IS_LAYOUT
v. IT_FIELDCAT
vi. IT_EVENTS
vii. i_tabname_header : Name of the internal table in the program containing the
output data of the highest hierarchy level.
viii. i_tabname_item : Name of the internal table in the program containing the
output data of the lowest hierarchy level.
ix. is_keyinfo : This structure contains the header and item table field
names which link the two tables (shared key).
II. Tables
i. t_outtab_header : Header table with data to be output
ii. t_outtab_item : Name of the internal table in the program containing the
output data of the lowest hierarchy level.
slis_t_fieldcat_alv : This internal table contains the field attributes. This internal table can be populated automatically by using REUSE_ALV_FIELDCATALOG_MERGE.
Important Attributes :
A. col_pos : position of the column
B. fieldname : internal fieldname
C. tabname : internal table name
D. ref_fieldname : fieldname (dictionary)
E. ref_tabname : table (dictionary)
F. key(1) : column with key-color
G. icon(1) : icon
H. symbol(1) : symbol
I. checkbox(1) : checkbox
J. just(1) : (R)ight (L)eft (C)ent.
K. do_sum(1) : sum up
L. no_out(1) : (O)blig.(X)no out
M. outputlen : output length
N. seltext_l : long key word
O. seltext_m : middle key word
P. seltext_s : short key word
Q. reptext_ddic : heading (ddic)
R. ddictxt(1) : (S)hort (M)iddle (L)ong
S. datatype : datatype
T. hotspot(1) : hotspot
Simple ALV report
http://www.sapgenie.com/abap/controls/alvgrid.htm
http://wiki.ittoolbox.com/index.php/Code:Ultimate_ALV_table_toolbox
ALV
1. Please give me general info on ALV.
http://www.sapfans.com/forums/viewtopic.php?t=58286
http://www.sapfans.com/forums/viewtopic.php?t=76490
http://www.sapfans.com/forums/viewtopic.php?t=20591
http://www.sapfans.com/forums/viewtopic.php?t=66305 - this one discusses which way should you use - ABAP Objects calls or simple function modules.
2. How do I program double click in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=11601
http://www.sapfans.com/forums/viewtopic.php?t=23010
3. How do I add subtotals (I have problem to add them)...
http://www.sapfans.com/forums/viewtopic.php?t=20386
http://www.sapfans.com/forums/viewtopic.php?t=85191
http://www.sapfans.com/forums/viewtopic.php?t=88401
http://www.sapfans.com/forums/viewtopic.php?t=17335
4. How to add list heading like top-of-page in ABAP lists?
http://www.sapfans.com/forums/viewtopic.php?t=58775
http://www.sapfans.com/forums/viewtopic.php?t=60550
http://www.sapfans.com/forums/viewtopic.php?t=16629
5. How to print page number / total number of pages X/XX in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=29597 (no direct solution)
6. ALV printing problems. The favourite is: The first page shows the number of records selected but I don't need this.
http://www.sapfans.com/forums/viewtopic.php?t=64320
http://www.sapfans.com/forums/viewtopic.php?t=44477
7. How can I set the cell color in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=52107
8. How do I print a logo/graphics in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=81149
http://www.sapfans.com/forums/viewtopic.php?t=35498
http://www.sapfans.com/forums/viewtopic.php?t=5013
9. How do I create and use input-enabled fields in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=84933
http://www.sapfans.com/forums/viewtopic.php?t=69878
10. How can I use ALV for reports that are going to be run in background?
http://www.sapfans.com/forums/viewtopic.php?t=83243
http://www.sapfans.com/forums/viewtopic.php?t=19224
11. How can I display an icon in ALV? (Common requirement is traffic light icon).
http://www.sapfans.com/forums/viewtopic.php?t=79424
http://www.sapfans.com/forums/viewtopic.php?t=24512
12. How can I display a checkbox in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=88376
http://www.sapfans.com/forums/viewtopic.php?t=40968
http://www.sapfans.com/forums/viewtopic.php?t=6919
Go thru these programs they may help u to try on some hands on
ALV Demo program
BCALV_DEMO_HTML
BCALV_FULLSCREEN_DEMO ALV Demo: Fullscreen Mode
BCALV_FULLSCREEN_DEMO_CLASSIC ALV demo: Fullscreen mode
BCALV_GRID_DEMO Simple ALV Control Call Demo Program
BCALV_TREE_DEMO Demo for ALV tree control
BCALV_TREE_SIMPLE_DEMO
BC_ALV_DEMO_HTML_D0100
Reward points if useful
Regards
Anji

Is there is any way to find the data transfer from client to Configuration Manager for health monitoring and hardware Inventory

Hi
Can Configuration Manager provide a way to find the data transfer from client to Configuration Manager for health monitoring and hardware Inventory. How can I know what amount of data is consumed during that process

Place archive_reports.sms in %systemroot%\ccm\inventory\temp\ for both 64-bit and 32-bit computers.
There are two situations where you can use this depending on the type of client:
1. To keep inventory reports on a client (that is not an MP), create the following file:
%systemroot%\ccm\inventory\temp\archive_reports.sms
2. To keep inventory reports on a MP (that is also a client), create the following file:
<x>:\sms_ccm\inventory\temp\archive_reports.sms
The XML file will be saved in the inventory\temp folder.
More information on the above here: http://blogs.technet.com/b/configurationmgr/archive/2012/09/17/controlling-configuration-manager-2012-using-hidden-files.aspx

I designed a website for my client and he had already purchased a hosting package with a company, Mu

I designed a website for my client and he had already purchased a hosting package with a company, Muse is asking for the Business Catalyst in order to use the contact us form. What can I do in order to fix this and avoid having to purchase the Catalyst service. Please advise can the code be alter?

Yesterday Adobe announced updates to all the creative cloud products, including Muse. One of the new features for Muse is Forms that work on most hosting providers(not just BC).
The new version of Muse will be publicly available in June. Prerelease builds are available now for users who have joined the prerelease program (http://www.adobekb.com/participating_in_muse_beta.html)
http://www.adobe.com/products/muse.html
http://adobe.ly/17IojFs
http://youtu.be/RrXHhiY4-a0

Can I uninstall Extension Manager CC, or do I need ot for CC Photoshop and Lightroom?

Can I uninstall Extension Manager CC, or do I need ot for CC Photoshop and Lightroom?

Thank you, "Staff" (NOT YOU CARL SUN). But you (STAFF) have not answered my original query.
Here is an explanation of my original question.
I want to uninstall Extension Manager from my CC2014 App Menu. Is this a mistake? Or should i not do this because I need it for my CC2014 Program, i.e , Photoshop CC 2014 NS and Lightroom cc 2014 alone. I have nothing else. I want nothing else.

I changed my apple id email because I needed a more recent email and forgot my old password, now I need to sign out of my old Apple Id and don't know how. Help???

I changed my apple Id email because I needed a more recent email and forgot my old password, now I need to sign out of my old Apple Id and don't know how. Help???

Make sure you are signed into iMessage and FaceTime with your current ID. If they are signed into the old ID, go to Settings>Messages>Send & Receive and Settings>FaceTime, tap the ID, sign out, then sign back in with your current ID.
Then temporarily recreate the old ID by going to https://appleid.apple.com, click Manage my Apple ID and sign in with your current iCloud ID. Click edit next to the primary email account, change it back to your old email address and save the change. (You should not have to verify the old email account so it doesn’t matter if you no longer have access to it.) Now go to Settings>iCloud, turn off Find My iDevice and enter your current password when prompted (even though it prompts you for the password for your old ID). Then go to Settings>iCloud, tap Sign Out (or Delete Account if you are not running iOS 8) and choose Delete from My iDevice when prompted (your iCloud data will still be in iCloud). Next, go back to https://appleid.apple.com and change your primary email address back to the way it was. Now you can go to Settings>iCloud and sign back in with your current iCloud ID and password (your data will download back to your device).

TS3297 I i downlaoded flashcards + with the top in app purchase of "US english female" for 1.99 and it shows the purchase with the option to download it for free then it comes back "Failure ?! Receipt verification failed !

I downloaded flashcards + with the top in app purchase of " US english female" for 1.99 and it shows the purchase with the option to download it again for free then it comes back "Failure ?! Receipt verification failed ! I have deleted the app and reinstalled several times and it still does not work !!!!I have a iphone 4s with the 5.1.1. Thanks

Lots of people having this problem. Flash card+ says this is due to a change in the Apple processes receipts... See posts on their facebook page. https://www.facebook.com/flashcardsplus/timeline?filter=2

Have a test version in use for testing purposes and want to buy it now without loosung the files. How to do so?

I've a test version in use for testing purposes and want to buy it now without loosung the files.

Just buy it and enter your serial key.

Need advice for future design and hardware I should purchase now.

Similar Messages

Maybe you are looking for