Need advice for project. Any suggestions welcome.

Hello fellow Archers,
I am taking an advanced operating systems class and our focus is on the linux kernel. My group has been assigned the topic of memory management within the Linux kernel. I am looking for suggestions for an interesting project involving memory management. I'm sure I could get into the kernel source and make a mess of things, but that wouldn't be very interesting would it.
I have seen some interesting posts on this forum, so I figured there are some power users who could offer such suggestions.
Thanks

Pages, or any simple layout app.
https://itunes.apple.com/us/app/pages/id409201541?mt=12

Similar Messages

  • I have just about given up trying to download Mavericks for my 6-month old iMac running OS X 10.8.5. Each time it gets to around 996mb and stops. Any suggestions welcome.

    I have just about given up trying to download Mavericks for my 6-month old iMac running OS X 10.8.5. Each time it gets to around 996mb and stops. Any suggestions welcome.

    Thanks Giancarlo. The problem turned out to be my modem/wireless router, which has now been replaced and the problem solved.

  • HT5037 I have downloaded and installed this tool, but it's still telling me I need to update. Any suggestions why this isn't working for me? I have a Macbook Pro.

    I have downloaded and installed the iPhoto tool to update so my pictures transfer over, but it's still telling me I need to update. Any suggestions why this isn't working for me? I have a Macbook Pro.

    You have to download and RUN the iPhoto library upgrade - then launch iPhoto - If you had iPhoto '08 or earlier (version 7.x.x) - the upgrade is installed in the utilities folder of your Applications folder
    LN

  • Phishing and cookie software for Mac Lion - Is it needed, and if yes, any suggestions?

    phishing and cookie software for Mac Lion - Is it needed, and if yes, any suggestions?

    no.  OS X does a good job of doing this for you itself.

  • How can I get my stereo to play music videos from my Ipod Nano?  It comes up with the message "This device not supported".  Strangely my Iphone IS recognised.  The stereo, Ipod, and Iphone are less than 4 months old. Any suggestions welcome!

    How do I get my Ipod to play music videos through my theatre system?  I keep getting the message "This device not supported".  My theatre system WILL recognise my Iphone however.  The theatre system, Ipod, and Iphone are all less than 4 months old.  Any suggestions welcome!

    Check with the theater system vendor and see if their system is compatible with the Nano. The resolution on the Nano may be too low for the system.

  • I have Lion, and I can't see my unread messages count in the dock, even after the preferences set up. I find the Lion Mail too complicated. Leopard was much easier and more simple to use. I only have one account& don't need all the rest. any suggestions

    I have Lion, and I can't see my unread messages count in the dock, even after the preferences set up.
    I find the Lion Mail too complicated. Leopard was much easier and more simple to use. I only have one account& don't need all the rest.
    any suggestions?

    weird.
    It's so frustrating, I got my Mac Book 5 days ago and I'm already having a discussion in the forum.
    Thank you so much for your prompt replies.
    It's past midnight here so I'd better get some rest...
    Good night captfred!

  • HT2292 My iphone is described as iPhone 4s on the back, but the model number on the back is A1332. IThe device cannot be recognised on by itunes for windows. any suggestions?

    My iphone is described as iPhone 4s on the back, but the model number on the back is A1332. IThe device cannot be recognised on by itunes for windows. any suggestions?

    Any chance someone had it repaired somewhere (i.e. not by Apple) - maybe had the back glass replaced  by a 3rd party shop at sometime?
    Dose the phone have siri (iPhone 4 would not)? Does the camera have face recognition and panoramo (again, iPhone 4 would not)?
    If everything else checks out as iPhone 4s, then I'd guess the back glass was damaged and someone got it replaced.
    In order to get it recognized by iTunes, you may need to plug it in and force it into recovery mode, see
    http://support.apple.com/kb/HT1808 and then restore it as a new device.

  • Need advice for deploy adf web fusion application created in Jdev11gTp4

    hello,
    need advice for deploy adf web fusion application created in Jdev11gTp4
    and it will be nice if you have helper sites
    thanks
    greenApple

    Is there something specific in TP4 that you want to use TP4 - as John suggests, it might be an idea to use the full production release (11g). As for resources for information you can check out
    [Jdev Home|http://otn.oracle.com/products/jdev] this page contains links to the developers guides and various how tos etc etc. The follownig page is also useful and is focused more to those who are less familiar with Java
    [JDev for Forms|http://otn.oracle.com/formsdesignerj2ee]
    Hope this helps and maybe if you can be more specific we can better guide you.
    Regards
    Grant

  • I have an old iphone 3 32gb and don't use it to make calls as I have a 4s but would like to use the 3 for music any suggestions as to how I can sync two phones with I tunes

    I have an old iphone 3 32gb and don't use it to make calls as I have a 4s but would like to use the 3 for music any suggestions as to how I can sync two phones with I tunes

    Plug the device into the computer.
    Select the content desired to sync.
    Sync.

  • I'm all Mac across the board: iPhone 5, Macbook Pro, Apple TV etc. I can't get the movies I've purchased on my Apple TV to appear in my iTunes library for viewing- Any suggestions? I have iTunes Match turned on and everything.

    I'm all Mac across the board: iPhone 5, Macbook Pro, Apple TV etc. I can't get the movies I've purchased on my Apple TV to appear in my iTunes library for viewing… Any suggestions? I have iTunes Match turned on and everything.

    Thanks Terence! I can see iTunes library from neither iPhoto or iMovie . I'll check on iTunes forum.

  • Pleeeease help!! iTunes driving me crazy! Any suggestions welcome

    When iTunes plays any track it freezes the whole computer when it gets to 11s into the track then becomes unfrozen at 24s. Media player doesn't do this so it has to be an iTunes problem. I have downloaded iTunes many times to try and fix/reinstall the software but nothing works. Please help! Any suggestions welcome!!

    I had a similar problem when I got my Mac. I had problems with both syncing to iPhone as well as Apple TV. I ended up deleting and reinstalling iTunes (make sure you get all the components, there's a KB out there on it). Then repairing permissions using the Disk Utility (reinstall iTunes after this), apparently that fixes a lot of sins in the Mac world. (The basic problem is permissions, or at least mine was.)
    I too was skeptical at first.

  • HT3576 Only receiving notifications to my iPhone but not to my iPad. Pretty sure they are both set up the same. Any suggestions welcome.

    Only receiving notifications to my iPhone but not to my iPad. Pretty sure they are both set up the same. Any suggestions welcome.

    Open the Settings app on teh iPad, go to Notifications and check to see what you have set up.
    Make sure Do Not Disturb isn't set to On.

  • Need advice for future design and hardware I should purchase now.

    I was wondering if someone could assist me in making a decision on where I should take the future design of my network. Currently the design has no redundancy and I've been told recently that my company has a bit of money to spend and that it needs to spend it within the next 2 weeks. I am fairly new to the company so haven't been able to really think about future redundant designs nor have I studied much about designing networks. There are about 200-300 people that may be using my network at once, all users aren't at the location in question but they may be asking for resources from our servers.
    I've included a basic design of the "core" of my network and would like any suggestions for creating redundancy in the future and also optimizing the way data travels to our servers. Do people generally have redundant Layer 3 switches for the core in small networks such as mine? I will be replacing the 2811 since it only has 100Mbps connections and was thinking, perhaps replace this with a Layer 3 switch with the plan to have another identical Layer 3 switch installed to offer redundancy in the future.
    Also, would it be a good idea to move the servers into a vlan on the core? Thanks for any advice on what I should be purchasing now with plans for redundancy being implemented over a year.  -Mark

    40k Can go pretty quick depending on the scope. Your server farm especially should be dual-homed capable of surviving link, hardware, routing, and software failure.
    It's going to be best practice your server farm be in it's logical subnet, so failover mechanism can be controlled routing protocols, as opposed to FHRP's such as HSRP/VRRP/GLBP. Especially since you adjust routing timers to sub-second convergence.
    Budget will be the primary limitation (as it always it) but ideally dual 6500's running VSS and FWSM would be the ideal way. Data centers should be designed with high availability in mind, hence the need to 2x devices.
    Depending on the size of the SAN/Virtual infrastructure Nexus might want to be considered but you will chew up 40k before you know it.
    Also make sure the server farm is scaled properly. Your server farms should be oversubscribed in a much higher ratio compared to your access layer.
    CCNP, CCIP, CCDP, CCNA: Security/Wireless
    Blog: http://ccie-or-null.net/

  • Hard drive on macbook pro 13' needs to be replaced, any suggestions on which one as per today? mine was since 2009.

    Hello
    i was told my HD needs to be replaced as it is damaged (no exact explanation here from Apple but nevermind)....so is there a specific HD to avoid to be installed? i bought my mac in october 2009. Thank you for the advice.

    Thank you both, really useful info.My mac is for now 250 gb 5400rpm. I have to say this 250gb is enough for me.
    I was offered as below for replacing the hard drive.
    Would be Samsung a good option? hybrid one? for sure I take note no Western. And I would go indeed for 7200 rpm as suggested by you too.
    New hard drives starting with the most expensive:
    SSD hard drive instead of regular winchester:
    120 GB Samsung SSD meghajtó 28 000Ft +afa
    250 GB Samsung SSD meghajtó 42 000Ft +áfa
          -    winchesterek:
    320GB 5400rpm winchester  20 000Ft+áfa
    500GB 5400rpm winchester  22 000Ft+áfa
    1000GB 5400rpm winchester  27 000Ft+áfa
    Faster winchesters with 7200 rpm ( a bit quicker than 5400rpm):
    320GB 7200rpm winchester  24 000Ft+áfa
    500GB 7200rpm winchester  26 000Ft+áfa
    * Hybrid Winchester:
    It includes a 500 GB Winchester and a 8 GB SSD hard drive (hence hybrid ), combines the speed of SSD and the speed of the Winchester (it takes cca 30 sec to start the laptop instead of 90 seconds):
    500GB 7200rpm winchester +8GB SSD  34 000Ft+áfa
    Also since my date needs to be saved/recovered by data saving company, I was suggested to bring an external HD.
    Any suggestion on external HD to buy? or not to buy? then at least i will have a copy before getting new hard drive for my mac.
    Thank you

  • Need another hard drive  - any suggestions on specs and setup?

    I started working with video in Premiere about a year ago - I have filled up 1 TB and I need to buy an external HD.  Does anyone have any suggestions or tips for what kind works good for editing?  Also I think I am supposed to set up so that PRE runs from 1 HD and all of my video is on the other, is that accurate?  I'm using PRE 8 and I have some projects that I want to stay intact when I make the switch.  In other words, if I reinstall PRE so that the video is captured to the new HD, how does this affect other projects where the program and all the data is on 1 HD?  Any help would be appreciated - Eric 

    For the smoothest and fastest Video-editing, being able to spread the I/O load over several HDD's, is really good.
    Externals can present some unique problems, but this ARTICLE goes into a bit more detail. Note: there are some users, who have had zero issues with USB 2.0 externals, but I, and many others, have observed some major issues. Those observations are reflected in the above linked article.
    The ultimate is probably a 3x internal I/O setup, with eSATA for the two additional HDD's is next best.
    Good luck,
    Hunt

Maybe you are looking for

  • Final Cut, Quicktime, and Pro Tools conflicts

    Hi there, I'm working on a "situation" I recently encountered, and wonder if anybody else has had this problem. I'm trying to upgrade Pro Tools LE to version 6.9.2 with the install discs that were sent to me from Digidesign, and it's wreaking havoc w

  • HT201304 Trying to do an game in app purchase and it won't let me.  When I do music no problem

    I can't get the in app purchase to work. Says see iTunes support.  I can do music no problem. Verified payment information and still no go. Thought it might be some kind of money cap but did one yesterday for same amt and it cleared no problem

  • My hp external display is not found

    Have been using HP w19b as an external monitor for almost a year.  I have a 2009 (late) 27" imac and am running 10.8.2.  My external monitor went to sleep and never woke up on Nov 11, 2012.  I don't think there were any new updates on this date.  Had

  • Adapter Module for File Adapter using Eclipse

    I want to develop Adapter Module using Eclipse, please let me know if it is possible? -How to use Eclipse to develop adapter module and deploy it on J2ee server. Thanks

  • SOAP Sender (500) Internal Server Error

    When calling a WebService defined in XI, I get the folloginw error: System.net.WebException: The remote server returned an error: (500) Internal Server Error. at System.Net.HttpWebRequest.CheckFinalStatus() at System.Net.HttpWebRequest.EndGetResponse