Need advice for suitable SAP module for mechanical design engineer

Hi folks,
I need your valuable advice regarding which SAP core module I can opt for.
I am basically mechanical deisgn engineer involved in produt design and devlopment , engineering change management.
All your suggestions will be great help for me.
Thanks in advance.

i am from mechanical backgroud....one of my friend suggested me to learn sap hana bo .........
i dnt know any thing about this sap...i want to know what are the basics required to learn...nd with my mechanicl background will it be easy for me to learn this module....
do i need to have any basics to learn this
please help me out

Similar Messages

  • What is a good SAP module for a beginner?

    Hi experts,
    What is good functional module to learn these days? Besides the SAP FICO AND SD, which other modules are the best investment for a beginner?

    A: What is a good SAP module for a beginner?

    Hi,
    Which module you would like to go with will depend on various factors.
    Your qualification
    Your previous experience
    Your area of interest
    Besides the SAP FICO AND SD, which other modules are the best investment for a beginner?
    Any module from Business Suite would be very good. You could also go for SAP for Industries.
    Customer Relationship Management:
    http://help.sap.com/saphelp_crm60/helpdata/en/1a/023d63b8387c4a8dfea6592f3a23a7/frameset.htm
    SAP Customer Relationship Management (SAP CRM) is a comprehensive solution for managing your customer relationships. It supports all customer-focused business areas, from marketing to sales and service, as well as customer interaction channels, such as the Interaction Center, the Internet, and mobile clients.
    The SAP CRM documentation offers a comprehensive description of the functional scope of SAP CRM, and highlights the relationship between the application, the underlying technologies, and the business scenarios. It comprises several parts:
    Business scenarios
    Components and functions
    Analytics
    Data exchange and mobile technologies
    Supplier Relationship Management:
    http://help.sap.com/saphelp_srm2007/helpdata/en/74/344c430fab4d0bbc30996d56cc293a/frameset.htm
    SAP Supplier Relationship Management (SAP SRM) provides you with innovative methods to coordinate your business processes with your key suppliers and make them more effective. SAP SRM enables you to optimize your procurement strategy, to work more effectively with your supplier pool, and thus to gain long-term benefits from all your supplier relationships.
    With SAP SRM you can examine and forecast purchasing behavior, shorten procurement cycles, and work with your partners in real time. This allows you to develop long-term relationships with all those suppliers that have proven themselves to be reliable partners.
    The efficient processes in SAP SRM enable you to cut down your procurement expenses and to work more intensively with more suppliers than ever before.
    Strateg... [Show more]

    Read other 7 answers

  • Suitable functional module for technical consultant in sap ?

    hello!
    I am a SAP ABAP Technical Consultant with 2.5 years of Experience. Now i want to shift to a functional module to become a Techno-Functional. I am B.Tech in IT and i love to do coding. But i also want to know Business Process.
    So can you suggest me what would module would be best for me.
    Thanks & Regards.

    Hi Santanu
    I am a SAP ABAP Technical Consultant with 2.5 years of Experience. Now i want to shift to a functional module to become a Techno-Functional. I am B.Tech in IT and i love to do coding. But i also want to know Business Process.
    Please help us here: where in any of that paragraph do you provide any useful information about yourself that would allow any of us to:
    So can you suggest me what would module would be best for me.
    You have SAP experience. You know of SAP Modules. You work in the industry. You are your own person. How is anyone on here qualified to give you advise without any context?
    Step back - what do you enjoy doing? Which module have you learned about that you find interesting? Which one have you done more ABAP in? Which one might your current employer let you get experience in?
    I think you have the answer you just need to think it through a bit.
    Regards
    Colleen

  • Suitable Functional module  for ABAP consultant

    Hi all,
    I am an ABAPer with one and half years of experience.
    Can some body suggest me a functional module which will be easier to learn for me as I have no domain experience.
    Also please tell me the marketwise  hottest module these days such that there are projects as well as demand in the market.
    Also please tell me  about higher end modules in SAP.
    Plaese clarify the role a technofunctional has to play I mean is techno-functional has basically functional but aid to technical person or he has to do both functional as well as technical work.
    Thanks.
    Edited by: sandeep deshpande on Apr 29, 2008 8:15 PM

    Hi Santanu
    I am a SAP ABAP Technical Consultant with 2.5 years of Experience. Now i want to shift to a functional module to become a Techno-Functional. I am B.Tech in IT and i love to do coding. But i also want to know Business Process.
    Please help us here: where in any of that paragraph do you provide any useful information about yourself that would allow any of us to:
    So can you suggest me what would module would be best for me.
    You have SAP experience. You know of SAP Modules. You work in the industry. You are your own person. How is anyone on here qualified to give you advise without any context?
    Step back - what do you enjoy doing? Which module have you learned about that you find interesting? Which one have you done more ABAP in? Which one might your current employer let you get experience in?
    I think you have the answer you just need to think it through a bit.
    Regards
    Colleen

  • Need Help in Creating adapter module for SFTP Sender in NWDS

    Hi experts,
    I have a scenario where i should write an adapter module for SFTP sender in NWDS.. need your help in achieving this..

    Hello,
    >>i have followed the procedure of FTP but, adapter is not picking the file
    Make sure u have written proper expression to pick file.
    >>do we have any different adapter parameters for SFTP... the input file is .csv..
    I don't think there are any specific parameters needed for SFTP (but in case u are reading file name in AM then u might have to adjust SFTP namespace)
    Thanks
    Amit Srivastava

  • SAP modules for b.tech biotech students

    Hi memebers
    Am Prasant kumar.i have compeleted my B.tech in biotechnology.With that i have a distance BBA (Bachelor in business administration).
    I dont have any work experience.
    I want to build my career in SAP
    Can any one please guide me in this.I dont know whether SAP modules will be a good career option for me.
    Please suggest me the functional module which have good job oppertunities
    Thank you
    prasant

    Hi,
    Please check in the link Training & Certification | SAP
    Regards,
    Claire

  • HR Master Data Use for other SAP Modules?

    Which part of SAP HR Master Data can be used by various SAP modules including PP, SD, MM, PS, FI, etc?
    Expecting expert input!

    Which part of SAP HR Master Data can be used by various SAP modules including PP, SD, MM, PS, FI, etc?
    Expecting expert input!
    Hi
    The following may be useful try this out
    PP try this tcode and surf on HRMS-CR02 there u can bring the pernr to workcentre
    SD Try T Code VPE1 and u can assign the sales personnel using pernr
    MM Try T Code XK01 Create employee as vendor and u can use it for Vendor consignment goods via MSK3
    FI In fi u can create vendor like mm using FK01 for bulk amount distribution
    Hope it helps
    with regards
    partha

  • Need advice on graffics card upgrade for use of CS6 Mercury Playback in PR & AE w/ dell xps 9100

    I am curretly running CS6 on my dell xps 9100
    Windows 7 64bit
    12GB Ram
    2TB HD + 0 Rate 2TB External Drive (x2)
    Intel Core i7 930 operating at 2.8 gigahertz with an 8-megabyte cache.
      Memory and Storage  
    The Studio XPS 9100 can be equipped with up to 24 gigabytes of RAM. It uses Tri-Channel DDR3 SDRAM operating at 1333 megahertz. The computer has six DIMMs into which RAM can be plugged. The Studio XPS 9100 may have a hard disk size of up to 2000 gigabytes using SATA drives operating at 7200 rpm.
    Video
    ATI Radeon HD5870 with 1024 megabytes of RAM
      Expansion and Networking  
    The Studio XPS 9100 has one PCI slot, three PCIe x1 slots, one PCIe x8 slot and one PCIe X16 slot. It has four USB 2.0 ports, a 15-in-1 card reader, a headphone port and a microphone port on the front panel. The rear ports into an IEEE 1394a port, surround-sound audio ports, four USB 2.0 ports, one eSATA port, an S/PDIF port and HDMI ports. It has integrated 10/100/1000 Gigabit LAN through the RJ45 port on the back with optional internal Wireless-N. PCI card slot (PCI_1) 26
    PCI Express x1 card slot (PCIE1X3)
    PCI Express x16 card slot (PCIE16_1)
    PCI Express x1 card slot (PCIE1X2)
    PCI Express x1 card slot (PCIE1X1)
    PCI Express x8 card slot (PCIE8_2)
      Chassis and Power  
    The Studio XPS 9100 is 19.4 inches high by 7.8 inches wide by 20.7 inches deep. It weighs about 40 pounds. A 525-watt power supply powers the computer.
    I use Audition, Premiere Pro and After Effects (Dynamic Link) to edit concerts filmed on 4 HD Camera's (m2ts x3 and mp4) I also take and mix 6-8 tracks from soundboard and mix in audition. I find my system is struggling to keep up when I have done some color correction and then try to cut in multi-cam mode. My graphics card does not support CUDA and as stated above my system only has a 525w power supply. So a GeForce GTX 470, 570, 580 would not be compatable. I do not GAME but I work with large HD files (4 angles, 1-2 hours each, audio & effects).
    My trouble is I don't know which one of the graffics cards that support Mercury play back, would be the best for my needs without having to upgrade my power source (if possable). I'm thinking a mid level card and another 8-12 ram upgrade would be more suited (and cheaper) to my needs, unless I'm going to need a power upgrade anyway. If someone could please let me know what card would help me with my worload of these that would be great! I guess what Im saying is can someone tell me which of these is compatable with my system and is it worth it for the change in performance I will see?
    GeForce GTX 285 (Windows and Mac OS)
    GeForce GTX 470 (Windows)
    GeForce GTX 570 (Windows)
    GeForce GTX 580 (Windows)
    NVIDIA® Tesla C2075 card (Windows) when paired with a Quadro card as part of an NVIDIA Maximus™ configuration
    Quadro FX 3700M (Windows)
    Quadro FX 3800 (Windows)
    Quadro FX 3800M (Windows)
    Quadro FX 4800 (Windows and Mac OS)
    Quadro FX 5800 (Windows)
    Quadro 2000 (Windows)
    Quadro 2000D (Windows)
    Quadro 2000M (Windows)
    Quadro 3000M (Windows)
    Quadro 4000 (Windows and Mac OS)
    Quadro 4000M (Windows)
    Quadro 5000 (Windows)
    Quadro 5000M (Windows)
    Quadro 5010M (Windows)
    Quadro 6000 (Windows)
    Quadro CX (Windows)
    Tesla C2075** (Windows)

    Right now I can get a 570 for 175 bucks... R4yMoNd. When I look at the 570 in comparison  to what I have it doesnt look as though itis going to make too much difference. http://www.hwcompare.com/9048/geforce-gtx-570-vs-radeon-hd-5870/ I'm sure however the CUDA cores will speed it right up. I'm no good when it comes to all that so thanks to both you for the help. I have tracked down a 670 in stock (seems tough) for $440 then I need a 700 w power supply for about 70. If the 570 should take care of the problems listed above thats what I'm going for.. Just wasnt sure if it would make the needed difference

  • Need advice in writing forum component for a GUI application

    Hello,
    I need to write a forum component for a GUI application, that is a visual component that would have all the usual forum functionality - creating threads, posting replies, editing, logging in, etc. I'm planning to use some existing forum engine on a JBoss/Tomcat server. So I do not need a web-interface for a forum, but I need find some engine written in java with a clear interface that I could use in my app. I tried JForum (http://www.jforum.net) first, but it seems it doesn't have open API I could utilize.
    Could anyone please suggest appropriate engine, possibly anyone knows of open-source forum GUI apps I can look at?

    Google? You've never heard of Google? Seriously? Did you just get Internet access yesterday?
    http://www.google.com

  • I need to reinstall app world module for my curve 8520.

    Hi,
    I am a new participant here, attracted out of desparate search to regain my
    blackberry app world which disappered after a very
    disappointing mistake to have deleted a module for the said application on my curve 8520.
    Now any time I try to download app world I got a message that:
    net_rim_bbapp_blackberrymessenger is not install on my device,
    Please could any body help me on how I can get this module back to enable me reinstall blackberry app world?
    Thanks a lot and best regards.
    Solved!
    Go to Solution.

    I think you are in the wrong forum.  This forum is targeted to Blackberry developers, who write programs in Java.  I think you want to ask this question in the Curve forum you will find here:
    http://supportforums.blackberry.com/t5/BlackBerry-Curve/bd-p/Curve
    I will ask to get this moved.

  • N00b needs advice---community college SAP course

    Hello experts,
    Iu2019m here for advice and help. I had started looking into SAP a while back but for other circumstances I had to put that to the side for a while. Now Iu2019m back more motivated then ever and ready to absorb all the information possible. As you read my post keep in mind that Iu2019m a complete beginner and have never used SAP. My field of work now has nothing to do with SAP, Iu2019m a laboratory technician and thatu2019s where my question comes in; will a class like the ones below help me land a job that with time I can make a career? Also which of this classes would you recommend that have the most opportunity for advancement and growth?
    My community college offers several courses in SAP, but all the classes are geared for the professional using SAP in their own work environment, during an implementation, upgrade, or maintenance, or through consulting work. SAP version 6.0 is used in class. These classes are not part of training to pass a specific certification.u2026
    Classes offered:
    SAP End User Applications
    SAP FICO Financial Training
    SAP Logistics Training with Materials Management and Production Planning
    SAP Production Planning Training
    SAP Security Training
    SAP Security Training Advance
    Each class is $1450.
    Also have any of you ever become certified in a specific module of SAP without paying the big bucks for the SAP classes?
    BTW, I know $1450 is a very small amount compared to what the real SAP classes go for. I just donu2019t know if itu2019s worth it for what Iu2019m receiving in exchangeu2026

    Anybody? Just some advice will help. Breaking into the SAP career is difficult if you don't have the money to pay for the classes, I just want to know if there is a another way to get your foot in the door.
    Regards.

  • Search for a function module for deleting document originals (DMS)

    Hi,
    I'm searching for a function module to delete originals in documents (like manually with transaction cv02n). I'm only able to set an delete mark with the module 'BAPI_DOCUMENT_DELETE'.
    The module 'BAPI_DOCUMENT_CHANGE2' can only add new originals to an existing document. I need a possibility to delete all originals in an document without deleting the document itself.
    Has anyone an idea?
    Thanks.
    Jan-Christian Treusch

    Many thanks!
    That's especially the method I've searched for so long....
    best regards.
    Jan-Christian Treusch

  • Expert's guidance is needed in deciding the SAP module

    Hello All,
    This is my first post and happy to announce that have decided to make a careen in the field of SAP. From the experts m hoping to help me in deciding the right module for me.
    I have studied and have almost 4 yrs of experience in the field of  HR in the manufacturing companies in India. I haven't practiced anything since 2 yrs. Now again wanna get a hold on the career and have decided to settling in the field of SAP in USA. Have done a bit of research and feels like the market for SAP HR/ SAP HCM seem bit of saturated. I am open to change the module as have bit of interest in SAP PP/MM and Master data as well. Though m open to change the module but would prefer to get into the module where in I can use my HR experience.
    It would be great if you all experts can get me some guidance to help me decide the module which has a good job opportunity and the growth. I would highly appreciate your help.
    Thanks,
    CM

    Hi Josin
    CRM surely has a good future so you could spend time and efforts in learning more into that on the job.
    As for certification, I recommend that you work for more 2 years and go for the Professional certification (ABAP) rather than "Associate". It will be a value addition for sure.
    Please search these forums and also take others' opinions relating to CRM / ABAP certifications.
    Cheers!
    Zub

  • Which is the best SAP module for a "Business Lead" in healthcare-IT Industry with no IT-specific skills?

    My Qualification is M.Pharmacy. I have basic computer skills with 7 years of experience and adequate domain knowledge in medical/ pharma verticals and my job role is majorly in the Business Development Department.
    I found that the modules like SD (Sales & Distribution) and may be ABAP, Business Objects are relevant. But, it seems like ABAP/BO are not suitable for my profile (No IT/programming skills).
    My questions are:
    1] Is choosing a SAP career at this point is gainful?
    2] If I decide to go for SAP, which modules do you suggest.
    Thanks in advance!

    My Qualification is M.Pharmacy. I have basic computer skills with 7 years of experience and adequate domain knowledge in medical/ pharma verticals and my job role is majorly in the Business Development Department.
    I found that the modules like SD (Sales & Distribution) and may be ABAP, Business Objects are relevant. But, it seems like ABAP/BO are not suitable for my profile (No IT/programming skills).
    My questions are:
    1] Is choosing a SAP career at this point is gainful?
    2] If I decide to go for SAP, which modules do you suggest.
    Thanks in advance!

  • Need advice on storing configuration variables for use by FP2000 Controller for embedded application.

    I am creating 8 machines that generally operate in the same way and each will be controlled using a FP-2000 controller. The only difference between the machines is a set of scaling constants and pass values for determining if the machine completed its process successfully.
    In the past, using an idependent PC and Labview, I have created a configuration.vi for writing the constants and configuration variables to a data file on my hard drive. Then in the auto.vi I read(only once each time the program is started) the file and store the data in the program. I would like to do something similar with this system but am not familar with the Field Point system.
    I know i
    t is probably not difficult to store the data to the host computer and transfer it to the modules but I am better off writing to the modules once and storing the data onboard the FP controller for use by an embedded application. This way, if the network connection is lost for any reason, the machine can still operate. Is this possible, and if not what do you suggest in order to prevent being so reliant on the host computer?
    Thank you for your help.

    Mike,
    There are a number of ways to accomplish what you desire. The easiest is to continue doing what you are already doing. The FP-20xx series modules treat their flash memory as if it was a hard drive, so the file I/O VI's in LabVIEW work just the same in a FP-20xx as on a regular computer running LabVIEW. The primary variation will be in how you write the files over the network. Since mapping network drives is more of a Windows functionality, you can not simply have a VI running on your host computer use a File I/O VI to write to a FP-20xx. Instead, what you will need to do is to write the file to you local drive and then FTP (file transfer protocol) the VI to the FP-20xx module. This can be done using the LabVIEW Internet toolkit or any 3rd party FTP util
    ity. One word of advice; the OS on the FP-20xx does not support long filenames but due to a problem in the FTP server, long filenames (non 8.3 compliant) may be uploaded and once there, you will be unable to access the file again, even to delete it.
    An alternative method that I have seen used is to use a global VI and write to it from the host machine through the use of VI server. You can then have the program on-board the FP-20xx save the globals to your configuration file.
    Regards,
    Aaron

Maybe you are looking for