Need advice/guidance on how to export .FLV videos for my website.

Can anyone help me?
I am trying to embbed a .swf/.flv video into my website,
using dreamweaver and flash cs4. But when i do so, and i load the
video, the .FLV playback componet wont load or the browser dosent
even try to load the data at all, it just plays the video. So users
cant mute, have volum control, pause, stop or anything. Can someone
please help me? i looked all over the net for 2 days and cant find
a single turtorial or anything. I know alot of website use .FLV but
how? and how do you export it?

You need three parts for the flv playback: the swf, the flv,
and the video player skin swf. If you create the flv from your
Flash movie by importing the original video, Flash should make all
of those parts for you. Upload each of these files to your server
and the file should play as expected.
Can you describe in more detail what you are doing that may
be different?

Similar Messages

  • How to  Export/Import "report for the query" to another company

    Hello,
    I do this:
    1.create query in SQL analizer
    2.copy paste into SBO query generator and save
    3.create report for the query
    Then, How to Export/Import "report for the query" to another company ?
    Thanks for your HELP.

    Look for SAP Note number 600813
    That's the note Adele means, I guess.
    <b>Edit (@13:18)</b>
    The direct link:
    https://websmp101.sap-ag.de/~sapidb/012006153200000183292003E.ITF
    ---- Replace *SOURCE* with the source database name.
    ---- Replace *DEST* with the destination database name.
    insert into [*DEST*].[dbo].[RDOC]
    select [*SOURCE*].[dbo].[RDOC].*
    from
    [*SOURCE*].[dbo].[RDOC],[*DEST*].[dbo].[cinf],[*SOURCE*].[dbo].[cinf]
    where [*DEST*].[dbo].[cinf].[lawsset]=[*SOURCE*].[dbo].[cinf].[lawsset]and [*DEST*].[dbo].[cinf].[version]=[*SOURCE*].[dbo].[cinf].[version] and [*SOURCE*].[dbo].[RDOC].[Doccode]NOT IN (SELECT Doccode from [*DEST*].[dbo].[RDOC])
    insert into [*DEST*].[dbo].[RITM]
    select [*SOURCE*].[dbo].[RITM].*
    from [*SOURCE*].[dbo].[RITM],[*DEST*].[dbo].[cinf],[*SOURCE*].[dbo].[cinf] where [*SOURCE*].[dbo].[RITM].[Doccode] NOT IN (select Doccode from [*DEST*].[dbo].[RITM])AND [*SOURCE*].[dbo].[RITM].[Doccode]IN (SELECT Doccode from [*DEST*].[dbo].[RDOC])
    Hope it helps...
    Grtz, Rowdy

  • How to export a video in Final Cut Pro to Facebook

    hey guys, im trying to export a video for facebook and i cant seem to get the settings right for the life of me. any suggestions?
    Scott

    H.264...800mbps or 300mbps. Compressor has Quicktime 7 streaming presets for this.
    Shane

  • How to complete FCE video for upload to youtube

    Hi Apple Community,
    Does any one know how, exactly step by step
    how to finish FCE video for SUCCESFUL upload
    to youtube? I so appreciate your help.

    Check this out.
    Note the link to supported
    formats. You probably want to give them an h.264 .mov file. If you don't have Compressor, export using QT Conversion. Or download the free MPEG Streamclip and have it do the transcode (in which case you would export from FCE as a QT Movie Current Settings).
    Good luck.
    Russ

  • I need help. How to export split track for Final Cut Pro 7 Thanks

    I need help. I have edited a film and now the company I have made the film for want a split track of it. I have no idea how to export a split track off Final Cut Pro 7 and I need simple language to explain it to me as I am a beginner. Thanks

    I assume you have multiple tracks of audio? And the audio is distributed discretely over these tracks (sync sound on tracks 1 and 2, sound effects on tracks 3 and 4, music on tracks 5 and 6 for example)?
    Then duplicate your sequence by clicking on the icon for your sequence in the FCP browser and control-clicking on it. From the drop-down menu choose Duplicate. Double click on the duplicate sequence you just created to load it to the timeline and canvas.
    Now, working on the copy you just made of your finished sequence, click anywhere on the timeline, and type Command + 0 {zero} to bring up your sequence settings. Click on the Audio Outputs Tab.
    Once the Audio Output Tab opens, set the Outputs to the desired number of discrete tracks you want to export - in this case I will set it to 8, as I have sync sound on tracks 1 & 2, Voice Over on tracks 3 & 4, Sound Effects on tracks 5 & 6 and Music on tracks 7 & 8.
    Once I do that the 8 tracks appear. I set them all to Dual Mono as I want them to be discrete tracks:
    Once I am done, I click OK and return to the far left side of the timeline where the audio selectors are, and carefully control - clicking in the empty space above the lock symbol,
    From the drop down menu I assign the output of each track - track 1 to to output track 1, track 2 to output track 2, doing so to each track:
    You need to set the output for each track. Once all my track assignments are done, I go to the menu File > Export . . . > QuickTime Movie and export my sequence, but now it is exporting with 8 discrete tracks of audio.
    To do a quick check that everything is OK, re-import the movie you just exported back into FCP, and open it in the Viewer and you will see that it does indeed have the multi-tracks, as 8 mono track tabs appear at the top of the viewer.
    Now give that QuickTime a name that includes "Split Tracks" in the title and copy it to your delivery drive.
    MtD
    Message was edited by: Meg The Dog to fix typo

  • How to export flv file from Final Cut Pro?

    I'm using Final Cut Pro and try to export edited video in "Flv" format. However, there is no such choice and only "Flc" available? My friend has the same version of Final Cut Pro and there is "Flv" format to choice, why?

    I use QT conversion: file > Export > Using QuickTime Conversion >
    Then, under Format I only have "3G, AIFF, FLC, iPod, QuickTime Movie...", no "Flash video (FLV)" as my friend's computer?

  • Need advice on "best" way to prepare book cover for printing

    This newbie has created a front cover, back cover, and spline in Photoshop Elements with multiple layers consisting of a background image of a mountain, text, and on the front cover, an airplane. I've combined the three parts into a wraparound cover within a single indd file, which I've exported to PDF for upload to Amazon's CreateSpace (CS) for a print-on-demand book.
    CS instructions say to "flatten" the cover. I've researched the term and found forum discussions that mention "raster" and "vector" and the pros and cons of different options for preparing a layered image for printing. I'm aware of the cautions about flattening being an irreversible process, and to never do that to a master copy. Beyond that, to say I'm confused would be an understatement.
    I realize this is an InDesign forum, but I'm seeking advice on whether there are actions I should take in Elements before placing the three parts of the cover into the InDesign document for converting to PDF. For example, should I flatten them within Elements before placing them in the InDesign document, then convert to PDF? Or is it better to do that on the complete cover within InDesign?
    Any assistance on clearing up this fog would be appreciated.

    The print-on-demand site's instruction to flatten really has no direct relationship to InDesign, Peter. They don't say anything about what application you should use prior to creating the pdf, and that's what generated my original plea for help as to whether it would be best to flatten the individual images within PSE before placing them into InDesign, wait until they are combined and then do it, or if it is even necessary to do that at all.
    I've been doing some additional reading on the CreateSpace forum and found a couple of very detailed (translation: too detailed for me) discussions on the differences in the output based on how you tell Adobe to create the pdf. I also found the following buried in the Help section:
                      Check the PDF settings that will be used to create your PDF file. If available, select "PDF/X-1a," "High-Quality Print" or "Press Quality" from the list of presets. If your system allows, make sure the following settings are chosen. Any other settings should be left to default in most cases.
                      Fonts and images are embedded.
                      Bookmarks, annotations, and comments are disabled.
                      Document security (any type) is not used.
                      PDF/X format is used. PDF/X is preferred, but if you are submitting non-PDF/X files (for example, PDF/A), any comments, forms, or other non-printing objects could be removed during our review process.
                      Transparent objects are flattened.
                      Spreads and printer's marks are disabled.
                      Downsampling, or decreasing resolution, of images is disabled.
                      Bleeds are enabled (if applicable).
                      Click "Export" or "OK" in the export dialog box.
                      Once created, make sure to open the PDF file to see that it appears as you intended. Otherwise, make the necessary adjustments in the native document and re-create the PDF file.
    The mention of "High Quality Print" in the first line and the fact that it was InDesign's default setting for export left me with the impression that I didn't need to do anything other than export the cover and it would be in compliance with the requirements. Then when I read on the other forum about what each of the settings does to output, and all this discussion about which setting is best, I wasn't sure if the comment about flatttening applied to my output pdf or not.
    As for bleed, yes, and I hope my math is correct in calculating the spline width for cream b&w paper, 374 total pages, trim size of 5.25x8, and a bleed of .125" all the way around, which increases the InDesign document by .25" in width and height over the trim size. I fully expect to have to do all that again, but such is life in the fast lane.

  • How to play .flv videos on N900

    I need to know, how to play .flv (flash videos) on N900. Phone's media player doesnt support .flv format.
    plz help if somone knows......
    thanx.

    install mplayer and kmplayer from the devels, than you can play .flv videos with kmplayer easily (after you set the video player in kmplayer to mplayer from the settings )
    Reality is wrong....dreams are for real... 2pac .
    don't forget to hit that green kudos

  • How to export to video while MCs included

    hi there. I develop almost a timeline based animation but i
    have some movie clips in it. i need to export my swf to video
    formats like .avi or .mpg or .mov but when i exported it, movie
    clips were ignored. do i need to deal with after effect or other
    3rd party softwares? i can't believe if there's no native way. do
    you have any idea?

    Google "export video from flash":
    Flash Professional Help | Exporting Graphics and Videos
    http://www.fladev.com/tutorials/how-to-export-video-from-flash/
    Flash CS6 Tutorial - Export as Movie / Video - YouTube

  • How to export a video at a moderate certain format and size in premiere CC 2014: No Huge File Results!

    I have the latest version of Adobe Premiere, CC 2014 but whenever I want to render and export a video that is typically 70 megabytes in size I can't seem to always see how big the file will end up being for all the formats and I don't want to end up with a video larger than 250 to 300 megabytes in size just for the extremely best or highest quality even though I want the video to be well polished and in better quality than I usually get thee, These videos are usually imported as mp4. What file version of mp4 or otherwise would give me an originally imported video of 70 megabytes an output of no more than or around 300 megabytes or even less without compromsing video quality? I don't want a huge file size as I am uploading it to my YouTube channel via their web interface on another person's machine and they don't have Premiere and only has a DSL connection. So what video output settings should I use for a good quality video that isn't smaller than the original but the same size or a bit higher and not extremely large like MOVs and sometimes mp4s usually are depending on what you do to it and it is outputted.?

    Export
    Format: H.264
    Preset: YouTube (make sure this matches the dimensions of your sequence)
    You could further adjust the Target Bitrate but the preset is already setup for a good quality file for upload.
    You can also do further reading on Video Bitrates.

  • How to export execution commands for all jobs in project?

    I would like to export the execution command line windows batch file and text paramater file for over 700 BODS Jobs in a Project folder.
    Is there a command line tool or BODS Utility to export execution commands for all jobs in a project?

    if you look at the command line most of the information is fixed like job server, port etc., the main thing that you need is the GUID of the job, that you can get from AL_LANG Repo table. You can write a script or a DS job to build this command line and write to a bat and txt file for each job

  • How to export transparent clipart for general audience?

    I'm having to take various original simple bw and color vector art and create clipart for use by the lowest common denominator (people using Word and PowerPoint, etc.). I've tried exporting to EPS, WMF, and PNG and all of them have white backgrounds when imported into PowerPoint except the EPS (which I fear may not print right on non postscript printers).
    I just looked at some clipart that I exported to WMF last year and some of it is transparent and some of it isn't. All of it started as vector art in Illustrator. I'm not sure if I'm missing an option somewhere, but I really need to consistently export the art.
    Also, does anyone know of a script that would allow me to batch save/export these formats for a folder full of art?
    I'm using AI CS3.

    When you export the file from Illustrator as PNG, you are given the option of having a transparent background. This is the best bet for Word and PP.

  • How to loop FLV video?

    Status:
    - I imported an AVI video clip to Flash converting it to FLV
    - I published the project
    - I put the files on my web server
    - It automatically starts playing when you go to the web page
    Question:
    How do I make the clip loop?
    I've not done much Flash and no Action Script - so the simpler the better
    Thanks for any help.
    Details:
    (that may not be necessary to help me )
    - I wrote no Action Script to do this...
    - just imported/converted the video then published from Flash and them put on web server
    - Running Flash CS3 on PC with XP
    - I did Google this and found this how-to http://www.communitymx.com/content/article.cfm?cid=984BA
    But I can't find their download sample
    And, they say click on Frame-1 and press F9 then put code snippit in after line 7
    But, I see no Action Script when I click on Frame 1 and press F9... a window opens but no code appears...just a long menu on the left.
    Thanks again for any help.

    Given your Code:
    import fl.video.VideoEvent;
    flv.addEventListener(VideoEvent.COMPLETE,videoCompleteF);
    function videoCompleteF(e:Event){
    flv.seekSeconds(0);
    flv.play();
    When you say use "my name instead of flv in the code" do you mean use the name of my project or the name of my flv video file?
    My "project" is named zzz so I have these files...
    zzz.fla
    zzz.html
    zzz.swf
    SkinUnderAll.swf
    MyVid.flv
    AC_RunActiveContent.js
    So If I used the project name instead of flv in your code I would get...
    import zzz.video.VideoEvent;
    zzz.addEventListener(VideoEvent.COMPLETE,videoCompleteF);
    function videoCompleteF(e:Event){
    zzz.seekSeconds(0);
    zzz.play();
    Is this correct?
    Thanks again kglad !!

  • How to export/save settings for Authentication?

    Hello all,
    what is the best way to export/save settings for Authentication and 'core settings' of authentication using ssoadm?
    I want to save all settings from:
    (Top Level Realm) -> Authentication [ in web gui console].
    Also all settings from 'All Core Settings'. Is there a way to do that from command line?
    Thank you

    Does the backed up copy of the iPhone's settings include the voicemail information? I'm wanting to do a "restore" on the iPhone, but want to find a way to keep the voicemails and not lose them

  • How to create HD Video for Web

    After watching HD movie trailers on the Apple Web site I was wondering if anyone has information on how I can create 480P Video clips of my own work for my website? At the moment, I use compressor and the settings for Large DSL. It's good, but I'd like to basically copy the apple site, and give viewers the option of watching my work in HD if they want to.

    I agree with Mr. Wolsky's advice for YouTube. However, I get the feeling sampan would rather have small file sizes for quick upload rather than high quality.
    Without Compressor, it seems the smallest file can be generated using Share->Apple Devices... and selecting the iPhone option. If you want smaller than that you need Compressor unless you have another non-Apple compression tool that could be used to further compress the output.

Maybe you are looking for