Need Advice: Hard drive upgrade!

In todays world, files and programs are starting to require more and more space. I went the cheap route and bought a 13" MacBook, 1.83Gz base-line model, with a combo-drive (oh, how I wish I got the DVD-burner) and a 60Gb hard drive. But with all my stuff, 60 just isn't enough, so I was thinking of upgrading my hard drive to a some-what larger model. Now, since MacBooks follow a common laptop (notebook :P) standard for hard drives, and have a readily accesible hard drive bay, installation of the actual hard drive should be easy! But once the hard drive is installed, how do I move the entire contents of my old hard drive to my new one? That includes: my home folder, Mac OS X, programs, etc. And I would not like to instead get an external one, because it would be much easier (and convenient) to have all my stuff on one, main hard drive, not to mention Mac can't have the home folder on an external drive, and programs may not run, or even install, as intended when located on an external hard drive.
MacBook Mac OS X (10.4.9) 1.83 Gigahertz Intel Core Duo Model

Check some info Here.

Similar Messages

Hard Drive warning when upgrading to Mountain Lion. 2 try and I was able to upgrade. Software update for IPhoto, had problems restarting. Do I need my hard drive checked

Hard Drive warning when upgrading to Mountain Lion. 2nd try and I was able to upgrade. Software update for IPhoto, had problems restarting. Do I need my hard drive checked

Yes.
Choose Apple menu > Restart. Hold down the Command (⌘) and R keys as your computer restarts.
When you see a white screen with an Apple logo in the middle, you can release the keys.
Click Disk Utility, and then click Continue.
In the list at the left, select the item you want to repair. (Be sure to select an item that’s indented to the right in the list, not an item at the far left.)
Click First Aid.
If Disk Utility tells you the disk is about to fail, back it up and replace it. You can’t repair it.
Click Repair Disk.
If Disk Utility reports that the disk appears to be OK or has been repaired, you’re done.
Otherwise, you may need to do one of the following steps.
If Disk Utility can’t repair your disk or it reports “The underlying task reported failure,” try to repair the disk or partition again. If that doesn’t work, back up as much of your data as possible, reformat the disk, reinstall Mac OS X, and then restore your backed-up data.
If you continue to have problems with your disk, it may be physically damaged and need to be replaced

I just got my MacBook Pro a month ago. However I am realizing I need more hard drive space due to aps and programs. I use am external but am concerned about the space. Is there a way to upgrade my hard drive from apple and keep my warranty valid?

I just got my MacBook Pro a month ago. However I am realizing I need more hard drive space due to aps and programs. I use am external but am concerned about the space. Is there a way to upgrade my hard drive from apple and keep my warranty valid?

That would depend on whether your model actually has a hard drive. If you have the new 2013 Retina model, then you have a fixed storage device built-in that cannot be modified after purchase.

Need help picking the correct hard drive upgrade for my MBP

I need help picking the correct/best hard drive upgrade for my MBP. It is the 15" 2GHz Core Duo. Came with a spacious 90GB drive.
Suggestions and recommendations very appreciated.

It will take almost any 2.5 inch sata drive.
Take a look at www.newegg.com and www.macsales.com to see what's out there and how much it costs.
Toshiba have a 320gb 2,.5 inch drive in the works, but it's not quite out yet and will be expensive.
I'll start you off..
http://www.newegg.com/Store/SubCategory.aspx?SubCategory=380&name=Laptop-Hard-Dr ives

Hard Drive Upgrade - Incorrect Capacity Shown In Disk Utility After Installation

I have an older model Macbook Version 2.1 that had an 80GB hard drive installed. I have just installed a Western Digital Scorpio Black 500GB internal hard drive upgrade and successfully cloned my data over using Carbon Copy Cloner. The problem I have encountered is that only 98.1GB of capacity is shown in Disk Utility for the new hard drive. After starting the computer using my bootable copy via an external USB drive, I formatted the newly installed 500GB drive with the appropriate Apple formatting (e.g. GUID and Mac OS Extended Journaled) but it only shows 98.1GB of space available on the new drive. I was able to successfully clone the information from my bootable back-up of the old drive to the new drive but I just don't have the full 500GB capacity available to me.
What should I do? Is this a problem with the new hard drive or is there something I need to change on my Macbook to "see" the whole capacity of my new drive?
Thanks for your advice,
Dave

Hi Andrew,
When I formatted the new drive did it with 1 partition and it displays a TOTAL of 98.1GB free space (both in Disk Utility and About This Drive). As far as I can tell, the Macbook is treating the new WD drive as if it is only a 98.1GB drive rather than the 500GB drive that it is.
Thoughts?
Dave

Do I need external hard drive to back up my iMac before update to mountain lion? My is OS 10.6.8

Do I need external hard drive to back up my iMac before update to mountain lion? My is OS 10.6.8.

First, repair your hard drive and permissions:
Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
Second, make a bootable backup to an external drive using the Restore option of Disk Utility:
Clone using Restore Option of Disk Utility
1. Open Disk Utility in the Utilities folder.
2. Select the destination volume from the left side list.
3. Click on the Restore tab in the DU main window.
4. Select the destination volume from the left side list and drag
       it to the Destination entry field.
5. Select the source volume from the left side list and drag it to
      the Source entry field.
6. Double-check you got it right, then click on the Restore button.
Destination means the external backup drive. Source means the internal startup drive.
Third, purchase and download Mountain Lion from the App Store. Be sure you meet the requirements for Mountain Lion:
Upgrading to Mountain Lion
To upgrade to Mountain Lion you must have Snow Leopard 10.6.8 or Lion installed. Purchase and download Mountain Lion from the App Store. Sign in using your Apple ID. Mountain Lion is $19.99 plus tax. The file is quite large, over 4 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
     OS X Mountain Lion - System Requirements
       Macs that can be upgraded to OS X Mountain Lion
         1. iMac (Mid 2007 or newer) - Model Identifier 7,1 or later
         2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) - Model Identifier 5,1 or later
         3. MacBook Pro (Mid/Late 2007 or newer) - Model Identifier 3,1 or later
         4. MacBook Air (Late 2008 or newer) - Model Identifier 2,1 or later
         5. Mac mini (Early 2009 or newer) - Model Identifier 3,1 or later
         6. Mac Pro (Early 2008 or newer) - Model Identifier 3,1 or later
         7. Xserve (Early 2009) - Model Identifier 3,1 or later
To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
     Are my applications compatible?
         See App Compatibility Table - RoaringApps.
     For a complete How-To introduction from Apple see Upgrade to OS X Mountain Lion.

Hard Drive upgrade

I'm considering a hard drive upgrade but i dont know crap about them. I went over to newegg because i heard it was a good site and found this one......
"Western Digital Scorpio Blue WD5000LPVT 500GB 5400 RPM 8MB Cache 2.5" SATA 3.0Gb/s Internal Notebook Hard Drive -Bare Drive"
The only problem is, I dont know wheter it is compatible with my Early 2009 13 inch macbook pro..... Should I go with this one or are there better ones out there? I'm not really worried about price. I was aiming to get a 500gb. Thanks.

It is compatilbe if it's a 2.5" notebook SATA II 3.0 Gb/s model. Take Csound1's advice. If you buy a WD drive or any other makers' drives do not purchase any "green" drives as they don't work well in Macs.
If you want better performance get a drive rated for 7200 RPM with as large a cache as possible (typically 16 MBs.) Other makers to consider include Hitachi, Seagate, and SamSung.
If you want faster speed consider the Seagate XT500 hybrid. Or visit OWC and look into their DataDoubler that enables you to replace the optical drive with an SSD (or another HDD.)

Macbook pro hard drive upgrade - will it work on my spec?

Hi People
Basically looking for advise, as i know the basics, but heard there could be issues with the drive i want and macbook Pro's, so looking for advice whether the drive will work or not.
Now i know that i need the hard drives without the shock protection built in, for example i need the seagate AS range and not the ASG Range.
however iv heard issues with this drive in some mbp's spinning up and down, will this happen on my Macbook pro?? The drive i'm wanting is the Western Digital Scorpio Blue 640gb Sata drive - WD6400BEVT
the spec of my machine is 2.5ghz penryn Non unibody, 4gb ram, 15.4" mbp
Hardware Overview:
Model Name: MacBook Pro
Model Identifier: MacBookPro4,1
Processor Name: Intel Core 2 Duo
Processor Speed: 2.5 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 6 MB
Memory: 4 GB
Bus Speed: 800 MHz
Boot ROM Version: MBP41.00C1.B00
SMC Version (system): 1.27f2
the drive i'm wanting is the Western Digital Scorpio Blue 640gb Sata drive - WD6400BEVT
specs of drive are - http://www.wdc.com/en/products/products.asp?driveid=683
Performance Specifications
Rotational Speed 5,400 RPM (nominal)
Buffer Size 8 MB
Average Latency 5.50 ms (nominal)
Seek Times
Read Seek Time 12.0 ms
Track-To-Track Seek Time 2.0 ms (average)
Transfer Rates
Buffer To Host (Serial ATA) 3 Gb/s (Max)
Physical Specifications
Formatted Capacity 640,135 MB
Capacity 640 GB
Interface SATA 3 Gb/s
User Sectors Per Drive 1,250,263,728
Physical Dimensions
English
Height 0.374 Inches
Length 3.94 Inches
Width 2.75 Inches
Weight 0.26 Pounds
Metric
Height 9.5 mm
Length 100.2 mm
Width 69.85 mm
Weight 0.117 kg
Environmental Specifications
Acoustics
Idle Mode 24 dBA (average)
Seek Mode 0 26 dBA (average)
Temperature (English)
Operating 32° F to 140° F
Non-operating -40° F to 149° F
Temperature (Metric)
Operating -0° C to 60° C
Non-operating -40° C to 65° C
Humidity
Operating 8% to 95% Non-condensing
Non-operating 5-95% RH non-condensing
Altitude (English)
Operating -1,000 feet to 10,000 feet
Non-operating -1,000 feet to 40,000 feet
Altitude (Metric)
Operating -305M to 3,050M
Non-operating -305M to 12,200M
Vibration
Operating 0.00459 g²/Hz (10 to 500 Hz)
Non-operating 0.05102 g²/Hz (10 to 500 Hz)
Electrical Specifications
Current Requirements
5 VDC
Read/Write 500 mA
Idle 400 mA
Standby 50 mA
Sleep 20 mA
Power Dissipation
Read/Write 2.50 Watts
Idle 0.85 Watts
Standby 0.25 Watts
Sleep 0.10 Watts

People have been having some trouble with this drive. You might want to look at this discussion on the 640 WD:
http://discussions.apple.com/thread.jspa?threadID=2250690&start=0&tstart=0
Don't know if WD has resolved the issue yet or not--might be good to check with them before purchasing.
Good luck!

Time Machine confused after iMac hard drive upgrade

Here's the deal. I had my 24" iMac internal 250-gig hard drive upgraded to a 1-Terabyte drive. Tech guy cloned them with SuperDuper. New drive booted right up and works great. My question is regarding Time Machine, which I have set up to backup to an external drive. I assumed because old drive was cloned to new drive, Time Machine would think it was the same drive and just keep backing it up as it always has. But what happens is Time Machine just keep saying "processing" and nothing ever happens.
Is there a way to tell TM to start backing up the new drive as it always did or do I need to delete my current (1 1/2 yr. old) TM files and let it start from scratch again? I really don't want to do that. Any ideas?

As V.K. says, that procedure may or may not work.
The reason for the long preparing stage is that TM, seeing a different drive, is examining every file and folder on your system, and may do a full backup of your entire system.
Download the +Time Machine Buddy+ widget. It shows the messages from your logs for one TM backup run at a time, in a small window. You'll probably see a message about a UUID error referencing your internal drive --that means TM doesn't recognize it as the same one it last backed-up.
Then you'll probably see one about a "deep traversal." That means TM is looking at every file and folder on your system to see what needs to be backed-up. This takes quite a while, of course, and you won't see anything being backed-up (xx MB of yy GB) until it's done.
If TM does perform a full backup, it may have to delete a lot of your old backups to make room for the new one. If it can't delete enough, it will fail.

Spinning beach ball after hard drive upgrade

Im running a macbook pro i7 2.2ghz 8gb ram version 10.6.8 SL
I recently upgraded my 128gb ssd to a 512gb ssd drive. I cloned the drive to new drive and ever since then, I get the spinning beach ball very often whereas I never got it prior to the hard drive upgrade. Is there anything I can check or do to eliminate the freeze ups? It is VERY annoying. Or do I just need to do a fresh install on the new hard drive.
thanks in advance

Did you properly prep the drive first:
Drive Preparation
1. Boot from your OS X Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu.
If you are preparing an external or a non-startup drive, then open Disk Utility in your Utilities folder.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID (for Intel Macs) or APM (for PPC Macs) then click on the OK button. Click on the Partition button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.

Hard Drive Upgrade in Vista

I have an IBM T60p with original 90 gig HD. I spent a weekend trying to upgrade to a larger capacity drive. Downloaded several commercial programs. None of them worked properly. I finally found a way to use Vista to complete the task. This procedure works, have a new 320 gig WD 7200 RPM drive working correctly in my computer. Hard drive Upgrade in Windows Vista
This procedure was used on an IBM ThinkPad T60p with 90 gig SATA HD.Machine was upgraded with a Western Digital 320 gig BEKT SATA drive (Scorpio Black).
Before you start:You need to change the BIOS setting for Windows to recognize your new drive.
Reboot and enter BIOS
Select “Config” => Serial ATA (SATA) => SATA Controller Mode Option: => COMPATIBILITY
Save and exit
Review Boot priorities to enable the Boot from CD option
Have a copy of Windows Vista on CD; the version does not matter, you will use this only to boot from CD.
See WD product description at following website
http://www.wdc.com/en/products/products.asp?driveid=477
You will need an external USB hard drive to back up your existing hard drive.
It needs to be large enough to back up your existing drive.
Plug in the drive, Windows should recognize it.
Format the external hard drive so it is clean.
Backup Existing Drive
Back up drive C to the external drive using Windows Vista.
Go to Control Panel => Backup and Restore Center
Select the “Back-up files or your entire computer” option
Select “Back up computer
”Windows displays “Where do you want to save the backup”
Select “On a hard disk”
Windows displays hard drives available,
Select the drive you just plugged in
Click “Next”
Review the screen “Confirm your backup settings”
Windows displays “Local Disk (C) (System)” in the bottom window.
Click “Start backup”.
Backup will take 1-2 hours.
When completed, you have a complete image of your drive created by Windows Vista on the external HD
Install new Hard Drive
Shut down the machine.
Install the new hard drive per manufacturer instructions.
http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-62826
Boot the computer using the Vista CD.
Once files are loaded, Vista will open
Click “Next”
Click “Repair Your Computer”
Windows displays a window showing operating systems available, the window will be blank.
Click “Next”
Windows displays “Choose a Recovery Option”
Select “Windows Complete PC Restore”
Windows displays the saved image from your external drive
Click “Next”
Windows displays the restoration information
Click “Finish”
Remove the Windows CD
Restore will take 1-2 hours
Set up the new drive
After restoration, the system will reboot and you should be at the Vista Log In screen.
Log in normally and check to be sure your programs work.
You now need to tell Vista you have a new drive, and resize the partition to the capacity of the new drive.
Tell Windows to recognize the new drive
Start Menu, L click “Computer”
Drive C displays the stored image with the same capacity of the old drive.
R click on drive C => properties
Select the “Hardware” tab
Highlight drive C
Select the “Properties” tab, bottom right
Click on “Change settings”, bottom left
Click on the “Volumes” tab
Click the “Populate” tab
Windows will now populate the table with the settings for the new drive.
Save the settings and Reboot the computer.
Windows will now recognize the new higher capacity drive.
After reboot
Start Menu, R click “Computer”
Select “Manage”
In the L window, select “Storage” => “Disk Management”
Disk “0” is your new drive
Select Drive C
R click Drive C, select “Extend Volume”
The Extend Volume Wizard will open
Click “Next”
Click “Finish”
The new drive capacity is now operational.
You will now have two partitions, one for Windows, one for programs and data.

I'm also interested if anyone knows. I called the Square Group in London (Nex Oxford Street) but they said they'd get back to me ... but they didn't ...

MacBook Pro2012 : How can you get hard drive upgraded in Netherlands without losing warranty?

My MacBook Pro (2012) hard drive is almost full, Apple refuses to provide hard drive upgrade service, how can you get hard drive upgraded in Netherlands without losing warranty?

Dear Ralph, and All
My MBP is indeed non-retina.
I also have Apple care support for 3 years
I was in touch with Apple suport since last week. Response I got on Phone was pretty astounding (waiting email confirmation). They say following
- Apple support does not provide such service of upgrading hard drive
- Doing it yourself means you will lose warranty (due to nature of operation one would need to perform on the computer)
- None of authorised delars will provide such a service
So as such there apparantly is no way to get your hard drive upgraded without losing warranty.
Leaves me a bit perplexed
I do understand MBP retina (or iPAD / iPhones) are manufactured in way that makes it technically impossible to upgrade certain parts. But why non-retina MBP?
What do you all think? is this reasonable? is this what a MBP customer would expect?
Really appreaciate the quick responses i have recieved from you and others on this forum.
Many thanks
Tirath Shah

How can I browse T.M. backups made BEFORE internal hard drive upgrade?

Hi, all. I have googled and googled with no info on my particular situation. Maybe one of you can help. Here's hoping...
I have a MacBook Pro and use Time Machine to back up to a Firewire hard drive. I do not back up my System and Applications, just files. Consequently, when I recently upgraded my internal hard drive I restored all my data and settings from the original internal hard drive (not the Time Machine).
From there Time Machine began making NEW backups of the NEW hard drive, no problem, but I cannot browse the backups of the previous internal hard drive. Is there any way I can get Time Machine to recognize all of these backups as existing from the same machine and let me browse back beyond the internal hard drive upgrade?
Any help is greatly appreciated!

I think you have to browse them separately, but you should be able to do so by right-clicking (control+click) on the Time Machine icon in the dock or by holding the option key when clicking the icon in the menu bar.
Choose "Browse other Time Machine Disks" and you should see the old series of backups.
~Lyssa

How do I reinstall my operating system after hard drive upgrade on MacBook pro? I have Snow Leopard install disc

How do I reinstall my operating system (Snow Leopard) after a hard drive upgrade. I did a Time Machine backup before the new hard drive was installed. I put in the Snow Leopard install disc and don't get the icon I'm supposed to double click to install Snow Leopard and then the backup.
HELP PLEASE!!

Is the new HHD in the MBP?
Is the new HDD formatted Mac OS Extended (Journaled)?
Where is the old HDD? In an enclosure? What is on the old HDD, your user data? Is the Snow Leopard System on it?
Do you have a separate Time Machine Disk with your user data?
Answers to these questions should give an exact status of your situation so that one can proceed in the right direction.
Ciao.

IPod sync problems after hard-drive upgrade/change

Hello all,
Can anyone PLEASE help?
I have just had my hard drive upgraded/changed from the original 640GB drive to a new 2TB drive. I've also had an additional 4GB of RAM added to now give me 8GB RAM.
Absolutely everything else seems to be working fine (unusual for me and I'm often at the end of bad luck in such circumstances). The only thing I'm having problems with is syncing my iPod Classic with iTunes. Incidentally, I have the latest version of iTunes and my iPod software was up to date the last time I checked.
Before I go further, my system specs are:
iMac
24-inch, Early 2009
Processor 2.66 GHz Intel Core 2 Duo
Memory 8 GB 1067 MHz DDR3
Graphics NVIDIA GeForce 9400 256 MB
Software OS X Mountain Lion 10.8.2 (12C60)
When I connect my iPod Classic, the iPod screen initially shows 'Synchronisation in progress' (or whetver similar wording it actually is)... but this is just very briefly. It then indicates "Connected", and that's the way it stays and doesn't change at all.
It takes time to actually show up in iTunes, and when it does, I now have to very quickly click the iPod button (to bring up the iPod screen on iTunes) before the pointer turns into the spinning beach ball.
Now, it hangs... and hangs... and hangs... and hangs.
During this, I notice that "Manually manage music and videos" is ticked (which I didn't have ticked before), and also 'Enable disc use' is also ticked, although greyed out.
Occasionally, the spinning beach ball will disappear and the pointer will return, but this is very very briefly and I have a split-second to try unticking - first - the "Manually manage music and videos" box and then - later, if I'm lucky - untick the 'Enable disc use' box. However, on the odd occasion I've managed this, I haven't been able to go further except for two occasions when I managed to click "Apply". The iPoid on those to occasions started to update... but went nowhere... it just did nothing.
When the thing finally just hangs and hangs, I eventually have to 'force quit' iTunes and unplug the iPod without first ejecting. There was one other occasion when I managed to - split-second when the spinning beach ball disappeared - to click "eject" and the iPod succesfully did so.
There were a couple of occasions in the past when I had trouble with my iPhone and was told to delete/trash the iPhone photo cache folder. Remembering this, I tried this for the iPod (iPod photo cache) and it made no difference... same situation.
I did notice on one occasion at the beginning of all this that when I managed to unplug my iPod from iTunes, all the album covers were missing from the iPod (although still in iTunes). This was long before I tried deleting the iPod photo cache folder though.
Any help would be greatly appreciated.
Best regards
BionicDan

First things first the spinning beach ball is usually an indication that Search is going nuts.
Turn off Search entire Library by clicking on the downward pointing arrow to the right of the Magnisying glass and untick Search entire library.
Is your music still in iTunes on your new hard drive or is it only on your ipod?
If it is in your itunes then you should be able to plug in the iPod and uncheck Manually Manage music and sync
If the music is only on the ipod connect up as above click on the device and Drag all the music from your device to the library. then you can uncheck manually manage music and sync as normal

Need Advice: Hard drive upgrade!

Similar Messages

Maybe you are looking for