Need advice on exporting to .MOV from Flash

I'm creating an introductory video for readers of my webcomic. Because I know Flash, I'm creating it there. Basically it's a voiceover with some static comic images getting panned and zoomed around, with some sound effects and such.
They key thing is that I want this to be easily shared. The best way for that (I think - open to other opinions) is to get the final file uploaded to YouTube and saved as a YouTube video, which I then embed on my site. YT vids are extremely easy to share and email around. This gives me the best option for getting the most eyeballs on it.
The problem I have had in the past is that exporting a Flash file to .mov makes a MASSIVE file, size-wise. This video will be like 3 minutes long, I'm a little worried that the file size might be too big to upload to YT. Also, in general the exported .mov looks like garbage compared to the SWF.
I know you can modify the Quicktime compression settings and such when exporting, but I am not sure what the optimal settings are.
What are your thoughts? Looking for any good advice...

Hi Pixelmech,
one option I use a lot is to export not to Quicktime but to PNG sequence. Then import that into After Effects (assuming you have AE) and add a filter (optional) and then export to MOV format. YouTube allows uploads of files up to 2GB (I am pretty sure). In fact YT has a spec sheet on what compression to use too:
http://www.youtube.com/t/howto_makevideo
Hope this helps.

Similar Messages

Not able to export quicktime movie from Flash CS5 or CS6.

Hi! I am not able to export quicktime movie from Flash CS5 or CS6. When I export it the progress bar is showing and says Recording Flash content and nothing happens

I havent exported any videos in the past from Flash. The movie is around 45 seconds and the size is 470KB.
I tried both, the memory and the hard drive.
In the attached image you can see the settings and in the other image you can see the progress bar that remains without something to happen.
I dont mind what type of video to export it can be also .avi but again I have troubles there. It is very large and the animation is distorted.
The animation consist from two scenes. The first one can be exported without any problem but the second one cannot be exported. May be because it has some masks layers and guide layers?

Export quicktime movie from Flash CS6 hangs

I am trying to export a very short flash animation as a quicktime video from Flash CS6 but when the "Recording Flash Content" progress bar gets to the end nothing happens. I am able to click cancel and the x but nothing has been created for me.
If I wait long enough I get the error message "The export operation failed because it ran out of memmory" How can I fix this?

Hi Tomlijagogo,
Can you try the solutions in this post? Flash CS6, QuickTime: The export operation failed because it ran out of memory.
Thanks,
Preran

Every time I try to export my movie from iMovie, I keep getting a message that states, "Unable to prepare project for publication. The project could not be prepared for publication because an error occurred. (-50). HELP

Every time I try to export my movie from iMovie, I keep getting a message that states, "Unable to prepare project for publication. The project could not be prepared for publication because an error occurred. (-50). HELP

Hi
Error -50 paramErr Error in user parameter list
Can there be any external hard disks - if so How is/are it/they formatted ? Must be Mac OS Extended (hfs) if used for Video.
UNIX/DOS/FAT32/Mac OS Exchange - works for most but not for VIDEO.
What this means in Your situation is above me.
• free space on internal boot hard disk? How much ?
Video codec
• streamingDV, AIC etc. (not .avi, .mp4, .m4v, .wmv etc as they are containers not codecs)
Pictures
• in what format ? .jpg, .bmp, .tif, else ?
Audio
• from where/what format ? iTunes, .avi, .mp3, .aiff, else ?
Trash the Preference file:
The "com.apple.iMovie.plist" file
Many users has not observed that there are TWO libraries.
• Library - at root level
• Library - in user/account folder - THIS IS THE ONE to look into
from Luke Burns
I fixed the problem.. but it was very, very strange. I had a very long section for credits and set the line spacing to 1.0.. for some reason this caused it. I removed it, and it worked fine. I put it back, and I couldn't preview or play the video.
I don't know why that could cause that big of a problem, but it did..
Klaus1
You need more free space on your hard drive.
jonorparkerjon
After phone support from apple I ended up creating a new project and adding all 117 clips back in individually till I found out what clips flagged and would not allow me to export. I had 3 I deleted and replaced and everything works now 1hr after tedious work....
Where do Your material come from
• Camera
• External hard disk
• USB-memory
And all are connected so that iMovie can find it ?
from: jonorparkerjon
After phone support from apple I ended up creating a new project and adding all 117 clips back in individually till I found out what clips flagged and would not allow me to export. I had 3 I deleted and replaced and everything works now 1hr after tedious work....
from Karsten S
Shorter clips than 1,5 sec might be one of the culptrits
Bengt cont.
Set-Up might differ
• Mac OS - most probably X.7 or more
• iMovie version - more than iM'11 v. 9.0.4
Action taken
• Finalizing project - I never do as I never understood the gain to do so
• Share as HD to iDVD - never give any gain but if it works the resulting DVD is less quality than if SD-quality was shared
fps - set
•I only use PAL (25fps)
Yours Bengt W

No more alpha in exported QuickTime movie from Keynote '09

Hello
In Keynote '08, I create a slide with no background (None).
I add some text with some fancy text IN and OUT features.
I export using the Animation codec and the transparency option.
When I reimport the movie in another Keynote '08 file, it inherits the transparency of the imported file and thus everything is perfectly blended.
In Keynote '09 it is not possible anymore.
Even if I import an exported QuickTime movie from Motion with a transparent background, it is not possible to have a perfect blend, all layers are opaque.
Last but not the least, adding transparent files on top of each other in QuickTime player does not preserve transparency despite the fact that the Animation + transparency features are added in the files.
Thank you in advance.

Hey Gary - first off, thanks for your reply! I am currently forcing spotlight to re-index to see if that might help me out. After that I will try your suggestion and run a system software check.
I need a ProRes export as this is going to be combined with IMAG footage from a live presentation as well as additional video from an Arri Alexa. I want to preserve as much quality as possible so that there isn't a discrepancy in the final edit. Originally, I was rendering a small test to the desktop to gauge output quality of animations etc. I did go ahead and re-export a second time to an external drive, but it doesn't seem to matter as Keynote appears to initially render everything to the startup drive no matter what. The second export still ate about 15 gigs from my startup disk and I am unable to find any sort of temp files anywhere!
I am showing all files in Finder and searching around the ~/private/tmp folders to no avail. In the image below there appears to be a discrepancy in the size being reported by finder and the size I'm seeing listed in terminal...

Exporting to Quicktime from Flash CS5 has gliches

I have been exporting to QT movies from Flash 8 without any hassles, but when I export from a Flash to a Quicktime movie it has issues rendering- pixels hanging on the screen, low quality audio. I've tried with many different options and they all have the same issue. Help!

So what is the recourse here....select the option for exporting whatever the resolution is of the timeline. This usually gives me Mpeg1
I'm not following you here. Can you clarify?
Also am I right in assuming that Matrox HD compressing for H.264 is not available in CS 5.5?
I can't say for sure, but if the specs for the hardware say it should work with CS5.5, then it should. That, of course, is contingnent on having updated drivers, etc. from Matrox. Do you have the latest versions installed? If so, and it's *supposed* to work, that's an issue for the Matrox support folks. What hardware specifically are you talking about?
EDIT: OK, I see what hardware you're talking about. The card says its compatible with AME on a PC, but I didn't see anything specifically about AME on a Mac. It may not work with the Mac version of AME.

Export image sequence from Flash

Hello,
I made an short animation in flash (Only about 3 seconds) and I am wondering if there is a way to export the animation as an image sequece. I could've sworn I've done it before but I can't find any information on how to do it. If anyone can give me information on if this is possible and if so how to do it I'de appreciate it. I am using Flash CS3, and I just need to get the animation exported as individual images.

yeah i get the idea of guide layers and how useful they are. just dont want all my rough layers visible when i export an image from flash.. my point being you never had to hide guide layers before publishing on old versions of flash which i think makes more sense.. why would you ever want to see a guide layer on a published image?? anyway, i discovered this only happens when using actionscript 3.0 but not 2.0 so, ive gone back to 2.0

How do I stop Quicktime player from auto-launching after I've exported a movie from iMovie 10?

How do I stop Quicktime player from auto-launching after I've exported a movie from iMovie 10?
It's really annoying for Quicktime player to auto-lauch!

It may not be that simple David. They're using a "server" and some of the Apache software may want to launch QuickTime at boot.
This isn't really a QuickTime question. It's a sever question best answered in those Discussion pages.

Export a movie from pc to iPhone

how to export a movie from pc to iphone

iPhoto has no cross platform capability so this does not involve iPhoto
LN

I need help to transfer my movies from I tunes to an external hard drive please

I need help to transfer my movies from I tunes to an external hard drive please

Teach a man to fish, feed them for life.
https://discussions.apple.com/message/16276201#16276201

I cannot export my movies from iMovie since updating to Mavericks.

I cannot export my movies from iMovie since updating to Mavericks. I can get it into Theater then it says "Creating movie" but nothing happens. I can select share movie into a file, I can pick a name, resolution and location, but it doesn't save. I get the blue circle in the top right hand corner but nothing seems to happen. iMovie used to work perfectly, I cannot believe the update has ruined it!!!!

I cannot export my movies from iMovie since updating to Mavericks. I can get it into Theater then it says "Creating movie" but nothing happens. I can select share movie into a file, I can pick a name, resolution and location, but it doesn't save. I get the blue circle in the top right hand corner but nothing seems to happen. iMovie used to work perfectly, I cannot believe the update has ruined it!!!!

When i export a movie from imovie08 i get error 36. What to do?

when I export a movie from imovie08 i get error 36. What to do?
it is to export to a large file to an external hard drive what should i do to get it exported?

I am having the same problem and its only one movie, all my other movies will export. and it is even smaller than some of the ones I can export. Please I really want to show this clip to my friends from a vacation I went on. Any help would be most wonderful

Issues exporting MOV from Flash

I have a movie that uses a couple audio files. When I run this as a swf, everything plays fine...Except at the end. I have a frame that says thankyou.play()
That is tied to a mediaDisplay component
When I put a trade for thankyou.onSoundComplete....Nothing happens.
So with the Flash still working fine for the most part, I export the movie as a Quicktime movie. It plays the intro audio but never moves forward from there. The background noise is gone.
Any ideas?
Flash cs 4 published as flash 8 as2

When a movie exporting as a mov, actionscript will ignored.

Problems exporting a movie in Flash CS4

I'm trying to export a fla file to a mov file in Flash CS4.
My fla file is 152 mb. It is a 5 minute presentation I created with a 39 second f4v file (video clip) in the file.
I go to Export / Export Movie. I select Quicktime (mov). I keep the default settings and it starts to cycle through. It gets about half way and I get a message "The export operation failed because it ran out of memory"
I'm running this on a Mac Pro, System 10.5.8. I have 4 GB of memory. My HD is 232 GB with 155 GB available.
What is the problem and how can I get this to work?

Well, for some reason, I've managed to be okay with the idea that all software relying on links is prone to crushing at any given moment during execution of a project, Yes this includes After effects, Illustrator, Indesign_name it. However, one thing I cannot understand or even come to terms with the idea that Flash CS4 cannot export a project of 162mb. My library is organised, My scenes are in perfect order, I do not even use 3rd party componets in my projects..... but for some reason, I cannot export let alone publish an application file from FLASH CS4.
My first thought was maybe some thing was wrong with the "flash.ocx" extension, so I took a walk and visited the Adobe site to get an update, but still after re-installing it nothing seems to put a smile on my face_( I've spent sleepless nights on this animation and all I need is to just export/ publish it, however flash exports it halfway and out of a blue the export dialog and the incomplete file vanish) Some times I even wonder wether there is a vortex on my desktop.
Another problem in this category am finding is with flash player in my browsers, if it runs in exlporer, then it won't run in firefox, and when I check in the control panel after installing on both browsers, I am so suprised to find 4plugins of flash player, which is not the case with my friends laptops which use 1plugin and an activeX control for the web browsers.
Any help is very welcome, Am using Dell studio-xps Laptop running a 64bit Windows Vista OS, 4bg Ram, 1 Terabyte HDD and yes Intel Graphics media card with dedicated memory of 1gb. (Of what use are they if I cannot export a small file of 162mb, am even ashamed to mention it, heeeeeelp )

Export illustrator file from Flash Professional CS6

Can a background/scene created in Flash profession be exported to illustrator file with extension Ai without illustrator?

SIcsempertyrannus wrote:
Thanks for trying to help. Some how I managed to do it-but I did it some kind of meatball way. I kept clicking into the image until everything was selected...then I grouped it all and exported as fxg because I do not have the eps option. Somehow it worked, But I have 20 of these to do and this is def not the right way to do it. Hope someone else can wise me up. Thank-you for your help.
You did not have to group it you could have exported the image or the selection only or the movie in the FXG format (Flash Exchange Graphic) and what is wrong with doing it a newer and better way. FXG is supported in Flash Catalyst as is Illustrator and Photoshop FXG can be exported from Illustrator so you use the file in Flash more readily and though Photoshop does not support FXG that might change.
I am leased they finally came up with a rational method of exporting to and from Illustrator and Flash.
Eps was never the right way since Flash is not a postscript application.
You found the right way and format you just went about it in an unusual and unneccessary way.
Next time if you want all the art choose image instead of selection if you only need some elements of the art select them export choosing selection only that art will be exported no need to group.
if you want the whole movie then again choose the whole movie of course that will be a motion type format not FXG.
Anyway you sort of did it the right way.

Need advice on exporting to .MOV from Flash

Similar Messages

Maybe you are looking for