Need advice on how to handle off site computers that need imaging.

Hi
Our SCCM server is at our main campus, across the street from our campus, I have 16 computers that need imaging that are in a totally separate building that is linked to the main campus via microwave.
Could I copy the wim file to a portable drive and take it across the street, is there a way to image these computers and have it run a task sequence from a portable drive? if not, do you have any advice. I don't think the microwave could handle a multicasting.
Any advice would greatly be appreciated.
ps: the wim file is about 22 gig.

Hi,
You could create a standalone media to perform the OSD.
http://technet.microsoft.com/en-us/library/bb681017.aspx
Regards,
Hau

Similar Messages

How to handle multiple site to site IPsec vpn on ASA, any best practice to to manage multiple ipsec vpn configrations

how to handle multiple site to site IPsec vpn on ASA, any best practice to to manage multiple ipsec vpn configurations
before ver 8.3 and after version 8.3 ...8.4.. 9 versions..

Hi,
To my understanding you should be able to attach the same cryptomap to the other "outside" interface or perhaps alternatively create a new crypto map that you attach only to your new "outside" interface.
Also I think you will probably need to route the remote peer ip of the VPN connection towards the gateway IP address of that new "outside" and also the remote network found behind the VPN connection.
If you attempt to use VPN Client connection instead of L2L VPN connection with the new "outside" interface then you will run into routing problems as naturally you can have 2 default routes active at the sametime (default route would be required on the new "outside" interface if VPN Client was used since you DONT KNOW where the VPN Clients are connecting to your ASA)
Hope this helps
- Jouni

Need help on how to handle zip & text/csv as a resposne payload from Concur RestWebservice

Hi All,
We are getting zip(if there are multiple files) and test/csv(single file) as a response payload from the concur rest API and need your help on how to handle in NWBPM and SAP PO.
Zip response coming in response looks like below -
PKÀ˜F7extract_attendee_detail_p0600908soav_20150424022159.txts� rt©1204Õ50Ñ52©1¨áåPKzà@ÆPKÀ˜F2extract_CES_SAE_v3_p0600908soav_20150424022148.txts� rt©1204Õ50Ñ52©1¨©1ãåPKåëŠŸPKÀ˜Fzà
Text/csv response looks like below -
Extract|2015-24-40|20|0
Need you help on how to handle the zip content response.
Also need help on how to handle when text/csv response comes and when zip response comes.
As per the scenario, there are 4 calls to be made and we are using NWBPM and in the last call the actual respons (text/csv or zip) will come.
Please provide your inputs.
Thanks
Narayanareddy B

Hi Aaron,
Thanks for your reply.
I tried with Payload zip bean and the java mapping as mentioned in the response mapping of OM.
Payload zip bean - Zip zip.mode unzip
I am getting the error below in the receiver rest channel -
"Transmitting the message using connection JPR failed, due to: com.sap.aii.af.lib.mp.module.ModuleException: Zip: error occured during processing: java.util.zip.ZipException: invalid stored block lengths"
Java Mapping - used the java mapping in the response of Operation mapping
Here also i am seeing the same error in the channel log as it is synchronous step and the message got cancelled.
"Transmitting the message using connection JPR failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException: Error encountered while executing mapping: com.sap.aii.af.service.mapping.MappingException: Mapping failed in runtimeApplication mapping program com/equalize/xpi/esr/mapping/java/UnzipAndAttach throws a stream transformation exception: Exception: invalid stored block lengths"
The below is the response i am seeing and is it proper zip response payload(any encryption) , kindly advise.
PKâE�F:ws_extract_attendee_detail_p0600908soav_20150424083413.txts� rt©1204Õ50Ñ52©1¨áåPKzà@ÆPKâE�F5ws_extract_CES_SAE_v3_p0600908soav_20150424084014.txtíTß��@~oÒÿ�÷Fº»ìV}ëòCÏz Qljß8ÜöL�`N�ùão8�Ò«�´M�Ü@�awvçûfgÇùâÏ¤å#Ttï0Ø�B�²·olÇ�£[4Ï](L�]«�ÑbÀôÁÒc�0ÀÏdAªÙÐ¢¨Ìû�Êv¡�b¤eJA%��=Þ7Í>PÚ=í2��7ò[�¼¡=q/°¶�*ø)
K|<`BgÉÔºÜWs[§J�&Ñ:Ìá:´�ç«�RÐv�ÚÅAD'\�ÁtR²*DP3gî:B@JëhU�Ò'¬�ùQ\�È\D{·O×±JS\ï�-ò�¸�Þ²êó�{Å¡2®â,MmÉù XAzßüBn&®Sl-§�l¶A�×ú½³ÙFI®0¿©Ú¯¤�oT�iV²RÀJ��¼«`õ»�í Ûéwa#�àpY�««óq)U°JaøÁA�ûì>Ù³üHåÒe¾�7��Ð/§£u°Nzã÷ç4×·èãþ�¾}õ0ÙµYÄ�+J��eX\�E±ïsR%®yÜÕðsªáÚ$qÚÎÇ�Û$^%1¸AF*ý¶VÑêxÏZÏ¢U½T~Ñ®ØkW5ç×®õ¿w5¬zò:oN»�ô��íø÷úÛÙ=¬å�[ôÚ�þmczPKhÏ��i PKâE�Fzà@Æ:ws_extract_attendee_detail_p0600908soav_20150424083413.txtPKâE�FhÏ��i 5�ws_extract_CES_SAE_v3_p0600908soav_20150424084014.txtPKËö
Thanks
Narayanareddy B

I need to know , how to handle partner profile using BDC.

hi all ,
i need to know how to handle the Partner Profile using BDC, i need the basics behind if any one address regarding this it ill be very helpfull for me. i need a detail description for the above.
Thanks a Lot in Advance........
Thanks
senmaar.

I need the basic behind , need to know how its works..... And i need to know could you give me a simple scenario so that i can easily understand.
Could anyone Describe the Basics about that.......
Thanks in Advance
Regards ,
Senthil Kumar

I am using a code based typesetting program (not WYSISYG) that outputs PDFs. I am producing 100 plus pages that have multiple graphics on each page. I need to know how to format a PDF command that I can incllude in my programming that will tag my graphics

I am using a code based typesetting program (not WYSISYG) that outputs PDFs. I am producing 100 plus pages that have multiple graphics on each page. I need to know how to format a PDF command that I can incllude in my programming that will tag my graphics with "Alternative Text".
I know that with a Microsoft product graphics can be tagged before a PDF is made. I need to know how to do this with my programming.

The Acrobat SDK might be a starting point.
From there, perhaps a plug-in (built with C+).
Perhaps with a licensed release of a PDF Library (this could be $$).
The viable and cost effective alternative is use the tried and true.
Authoring in an appropriate authoring application with appropriate tag management.
Example: Adobe InDesign; Adobe FrameMaker or MS Word with PDFMaker (comes with install of Acrobat).
This way you place "Alternative Text" when mastering content in the authoring file.
Going the route and with some look-see (research) you may find programmatic approaches to placing the alt txt in the authoring file.
Note: as discussed in the Matterhorn Protocols there is no programmatic method that provides a fully accessible PDF (specifically, that is an ISO 14289-1, PDF/UA-1 compliant PDF).
Regardless, here you have a sub-forum for discussions on Acrobat usage.
Consequently discussions on/of 3rd party software is rather out of scope eh.
Be well...

I now have 5 devices that access the "cloud" via Match. I also have 3 computers that need to be authorized. Is there a way to authorize all these computers/devices in such a way to allow everything to access and sync to the cloud?

I now have 5 devices that access the "cloud" via Match. I also have 3 computers that need to be authorized. Is there a way to authorize all these computers/devices in such a way to allow everything to access and sync to the cloud?

I had a problem with a 5.0.3 project that would cause 5.0.4 to crash. Apple asked for a copy of the project and later told me it was because there were some empty text layers. Apple is aware of the issue and is working on a fix.
In my case I still had 5.0.3 on another Mac and could clean up the project. If empty text layers might be the problem, do you know someone with an earlier version who could open it and remove the empty layers? I'd be willing to give it a try if you'd want to send me the project.
Ross Hunter

How could I deathourize the computers that I do not have in my possesion anymore?

I have had a number of computers that were authorized for iTune songs.
I discarded them without deauthorizing those computers from my list.
How could you deauthorize those computers that are not even in my
possesion anymore?

Use the Deauthorize All command documented in this article.
(93501)

Need advice on how to make my website look better!

ive made a website for a security company but im just not 100% happy with it, i dont know if it doesnt look professional enough or things need changing design wise. i am open to any ideas on how to make my website look better, i also dont mind if anyone wants to dramtically change it if their idea is better. I would just very much appreciate a review and constructive critisism and ideas for a newly designed version of the site please!
[advertising slogan removed by host]
Thanks!

As a novice, some things I see: The footer has redundant, unecessary images (4 large images-for your services--REDUNDANT) odd? The text part of footer: text seems close, scrunched, have some space between heading and items, DO NOT CENTER TEXT!,
One of the service links bought to page with SAME LARGE image on homepage-change picture, don't use same large image for 2 different pages.
DO NOT use CONTACT US as 1 of 5 links on menubar. Do in another creative way, and/or use footer for contact. I think this looks amateurish (my opinion of course).
If I remember, the homepage and the rest of site, have exact same page structure.--See if you can atleast change the structure of inner pages versus the homepage.
Didn't look at enough, but..maybe...
each of your services should be a main menu link on your menubar. I would not put contact us on menubar, and you also had another menubar link with no dropdown( of course ok, but maybe could restructure)--Also your last service (on right of menubar)---why is that one different, and not included with the other services??
Seems like your menubar (items) structure could be reworked.--I would suggest, briefly looking at, to maybe have each service as a primary menu heading/title..YOU MAY NOT NEED A DROPDOWN MENU? Make sure if dropdown it is necessary.
Local security should be one of your services.
Have your footer logo, as is to left, but maybe put your footer links more to the right;;It will 'balance' the footer section
Your top logo seems too close to your main LARGE image (Which btw, seems oddly large compared to the rest of your site?)--That LARGE top image(the same palce on every same looking page), seems too big for your page--Why doen't it line up with the rest off your page content?

Need advice on how to slice layout

I am fairly new to web design. I have studied it for two semesters in college, but I have forgotten many techniques since. However, I know enough to follow any advice given.
What I am seeking is some advice on how to break down my layout. Particularly, I need help deciding how to slice the layout and organize the divs.
I have a good idea how to slice and manage the header and footer; however, I am puzzled on how I should structure the menu on the right. See the attachment, how the menu drives up from the body content, past the secondary navigation, and into the main image?
I need help in the middle area there.
Thank you in advace!
Hayden W.
[IMG]http://i19.photobucket.com/albums/b184/HayWet/whetstonelayout.jpg[/IMG]

If your design comp is in layers, you can toggle layers on/off to save individual elements.
Taking a Fireworks comp to a CSS Layout in DW
Part 1 - Initial Design
http://www.adobe.com/devnet/dreamweaver/articles/dw_fw_css_pt1.html
Part 2 - Markup preparation
http://www.adobe.com/devnet/dreamweaver/articles/dw_fw_css_pt2.html
Part 3 - Layout and CSS
http://www.adobe.com/devnet/dreamweaver/articles/dw_fw_css_pt3.html
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/
http://twitter.com/altweb

I have remote desktop and need to log in to an off site windows PC?

I have remote desk top and am trying to log in to a windows server off site. How do I do this?

You cannot use Remote desktop to control Windows computers. You could remotely connect to a Mac on the same network as your PC, and then use Microsoft Remote Desktop to connect from there if you like. But I'd try just using Microsoft Remote Desktop from the App Store and connecting directly.

Need advice on how to store and retrieve mathematical symbols - Oracle8i

I am a student developing a web database for a P3 project and am having trouble inserting non-standard text particularly mathematical sybols (intergrals and the like) or Gifs/Jpegs. Could anybody give me some advice on how this should be done? I am using PHP, Oracle8i and Solaris.
Cheers Pete

>1. I have all of my RAW files on my Mac's desktop and they are organized at the top level by each of the 2 cameras they were taken with and then the sub folders of each organized chronologically with each subfolder titled by the location or subject of the images matter within each folder.
>I want to import these into Lightroom 2.3 in a manner which will preserve this taxonomy.
>I also want to convert these RAW images into DNG files on import. How do I set up LR2 to do this?
On the Import Photos Screen, pick "Copy photos as Digital Negative(DNG) and add to catalog" from File Handling drop-down at top of screen.
If your photos are organised as:
Photos - Camera 1 ...
- Camera 2 ...
then Lightroom will reflect that folder view in its Folders panel. Also, when converting to DNG you get to choose destination folder (answers part of your question 2) and multiple organisation choices including "Organize by Original Folder"
(Take a look at Chapter 4 of the help file for more information: http://help.adobe.com/en_US/Lightroom/2.0/lightroom_2_help.pdf)
2. I want the Lightoom files and the image files....
Create your catalog on that drive. Move your images to that drive before importing them, and when converting to DNG on import, choose a folder on that drive as destination on import screen.
>Is RAID 1 as safe as backing up to 2 different HD's?
No. RAID 1 is a simple mirror of 1 drive on another; so if you delete a file on drive, it is also deleted from both drives. Likewise, if a file is corrupted on one drive it will also be corrupted on the mirror. RAID 1 is good as a safeguard against single-drive failure; your data will be available from the remaining drive, but it is not a safeguard against user error or file corruption.

Need some examples how to handle execptions in bpm

hi guys,
can any one provide an link where i can get some examples how to handle exceptions and fork etc., in bpm
regrds
viswa

Hi,
Check this SAP help.
<a href="http://help.sap.com/saphelp_nw04s/helpdata/en/33/4a773f12f14a18e10000000a114084/content.htm">http://help.sap.com/saphelp_nw04s/helpdata/en/33/4a773f12f14a18e10000000a114084/content.htm</a>
Regards,
Sudharshan.

I need advice on how to increase pixels (to 1000+) on images currently in the 6-700 range

Hello,
I need some assistance. I am new to Adobe Photoshop. I need to increase the pixels to around 1000 from the current 6-700 the images currently have. The photoprinting company I use told me I could do it on Adobe. Any help would be appreciated. Rich Shay [email protected]

You may think you need a solution to change existing small images to make them larger, but keep in mind that what they may really be saying to you is that you need to prepare the images so that they end up with more than 600 to 700 pixels width to begin with, so that the images have enough detail that they'll look good and crisp in the prints. To advise you further on doing this, you'll need to describe a bit about where you get your images initially and how you process them into these small versions.
If you really DO need to upsample existing small images to try to give the visual impression they have more detail in them, just doing Image - Image Size isn't really going to help - they'll still look fuzzy. BUT... There are a couple of pretty cool (and reasonably expensive) plug-ins that do some fancy shenanigans to make images seem to have more detail than they really do... You might want to try out either the Perfect Resize 7 plug-in by OnOne Software, or the Blow Up 3 plug-in by Alien Skin software.
-Noel

Need Advice on How To / Recommended App. for Custom "Word of the Day" Screensaver

I really like the “Word of the Day” screensaver that comes with OS X 10.8 Mountain Lion. I would like to either 1.) customize this screensaver with my own dictionary OR 2.) identify an app that I could purchase / download which would allow me to create my own custom “Word of the Day” screensaver.
Does anyone have advice on how I can create a custom “Word of the Day” screensaver using my own dictionary?
Any advise would be greatly appreciated!

Thank you!
If you have time for just a couple more questions. The ultimate goal is have my new flash files in a version (as3) so they can be used as android, html5 and iOs products.
So would the steps be these?
Install cs6
Open SWF files that were created in as2
(I am assuming by doing this, all the assets will end up in the library which is currently not happening when I import the swf files into Flash CC)
So now I have the old swf files open in a version of flash that works in as2.
I understand that as2 is not fully convertible to as3. But assuming I want to use the assets (graphics and audio) to recreate the animations in as3 can I then save the as2 file as as3 so it would then work with AIR?
Thanks again?

How to handle TDMS -2519 error that appears after some time?

Dear all,
I am having two compactRio devices (cRIO-9074) that are applied for data logging and control. As is convenient, one deterministic loop handles the data acquisition, while another loop handles the data storage.
The data storage loop basically creates a new TDMS file per data set that is subsequently stored to the disk.
The whole software operates as expected for some time (at least one day without any issues), but then I get a File I/O error -2519 that is thrown by TDMS open. This error occurs after some time on both compactRio systems. How should I handle this error properly and what may be the probable cause?
Upon system restart the error disappears and the system continues logging. Therefore, when having this error, I restart the system automatically, but this is to my opinion no proper solution. The fact that the error is cleared upon system restart, seems like it is a resource problem as outlined in: http://forums.ni.com/t5/Real-Time-Measurement-and/2519-error-trying-to-create-a-TDMS-file/td-p/26546... There they recommend using the FPGA programming mode to save on resources. However, I would like to continue using the Scanning Mode Interface instead. To better dedicate the processor resources, I changed the execution options of the different loops and gave Priority to the data acquisition and data storage loop. I also distributed the processes in different Execution Systems, to optimally divide tasks within the real-time processor.
When I manually neglect the error (just clear the error in the data storage loop), the issue remains for the following data sets that need to be processed. So once the error is thrown, it reoccurs upon trying to store each subsequent data set.
I also consulted http://forums.ni.com/t5/Real-Time-Measurement-and/tdms-2519-error/m-p/2569381/highlight/true#M13920 where the same error is reported and the solution is to update a .dll file in the installation. However, the installed software in my case appears to be okay. Also in that case, the problem occurred immediately, while in my case the problem arises after some time. Again this indicates towards a resource issue.
Can you please provide me with some possible solution to overcome this problem? I am looking forward to your opinions. Contact me if anything is unclear within my explanation, or you need additional information.

Hi gielvdbroeck,
Good job for the perfect description and for the well researched topic!
The first thing that comes to my mind is to Format and reinstall the software on the cRIO. This will make sure that you have a clean installation and there is no corruption in the OS.
One more thing to get into account is the memory. If you do not have enough memory where to store the file it's possible to throw this error.
Best,
Bozhidar

Need advice on how to handle off site computers that need imaging.

Similar Messages

Maybe you are looking for