Need advice on importing message...

after trying to import songs from a cd, i'm getting this message:
*+an error occured...the current encoder settings fir bit rate and sample rate are not valid for this file+*
any thoughts? thanks.

Perhaps something in your preference for importing is wacky. What do you encode with normally (e.g. MP3, AAC, etc.). Try going into preference and pick something else. OK out of preferences. Then go back into preferences and repick what you normally use and see if that works.
Patrick

Similar Messages

Need advice on importing MP3s

I've converted all my CDs to MP3s and they now reside on my NAS drive. But some are not showing up in iTunes like I'd like them to when I do the import (so that it understands the artist, CD, and track). I have a MUSIC folder, then under that a ROCK folder, and under that folders for the artists. Under that is a folder for the CD name, then under that are the songs (sometimes under the CD name folder there is a Disk 1 and Disk 2 folder, if it's a double CD). Anyway, there are some exceptions, there are CDs that are collections of songs from various artists, etc. I've uninstalled and reinstalled iTunes and need to let it import my music again. The first time I did this I just got some messiness in the the listings in iTunes and on my iPhone. What's the best way to go about organizing the files and/or cleaning them up so that the list in my iPhone is a clean as possible?
Thanks,
Russell
Message was edited by: GTGeek88

iTunes doesn't care where the files are stored or how they are named. iTunes organizes library strictly by data in the ID3 tags. If you want to maintain you folder structure make sure iTUnes is set to not copy files to library and to not keep files organized. If you leave these options on, the default setting, you will wind up with copies of your files organized by artist>album>track.
It is personal choice as to how you manage the library. I personally let iTunes handle all the files and folders. I never go into the folders using explorer at all.

Need advice on importing for quality since Lame won't work on itunes 7

I had been using Lame to import CDs. It would record at a variable rate based on the music and made really good sounding recordings to iTunes.
Since I updated iTunes to v.7.3, Lame no longer works and is now available only as source code (let me admit that I have no idea how to compile the code for OS X).
So I'm open for suggestion on what setting to use to import music for best playback quality while taking the least hard drive space.
Thanks.
iMac G5,160GB, 1.5GB,SD,Airport Extreme,BT Mac OS X (10.4.10) also Mac Mini, iBook, iPod 30GB

If you want to download and install LAME, you can find it here. There are some basic instructions for compiling it here.
I have compiled LAME many times on OS X, but now I just use the precompiled version included with Max.

Need advice about importing a Powerpoint file into FCE 3.5

I am editing a live event (a 2 camera shoot). A 3 minute Powerpoint projection was shown with a music track.
Our recorded footage is useable, but I thought that I could import the original PPT file from the producers (two teenagers), for better picture quality. I managed to get Keynote to Save it as a .mov file.
However the Producers seem to have re-edited the PPT and now there is certainly no Sync with the original. The duration is much longer than the original. The image quality is however brighter and crisper than our Rushes.
Can anyone suggest any Tips on working this way with PPT. (yes, I know - no-one in their right mind would ......)
My work-around seems to be just edit as a Fit-to-Fill and hope for the best.
I am not expecting too many brilliant ideas but if there is anyone out there witha solution, I will be very grateful.
Thanks in advance
Freesh

Matt,
Thanks for your lonesome Reply. Not too many people going down this route!
I have actually managed to edit it in as a Fit-to-fill and have previewed it within the sequence. However my programme is 90 minutes long and I have had to move on. I will come back to it again to see if I can improve anything probably tomorrow - Thursday.
I cant imagine I will use this avenue too often, so I dont want to seek perfection here or waste your time. There is only a tiny budget - it is a good cause really. We do these things.
But I am alaways generally interested in building my knowledge base. I didn't find any problem in converting or importing it to FCE HD 3.5. I am running 10.4.7. I saved it as a QT Pro 7.04 .mov. I dont know too much of the technical aspects, only when something goes wrong and I have to.
I did force it to Render. But I re-edited so I haven't yet bothered with it again. I am interested to see what it looks like on a TV (I dont have a dedicated monitor at present) and on the eventual DVD which is the Delivery format.
I will post back or email you with any more info when I finish the edit if you would like?
Thanks again
Freesh

Need advice in importing analog vinyl records

My wife has asked me to try to import a couple of her childhood Christmas albums into iTunes (so we can burn CDs). I have reasonably computer and audio savvy, but I can't seem to get a foothold to figure out how to approach this. I have read all posts here twice. I so far have not been able to record any audio on my computer..so first issue is not quality but just basic input.
Here is my background. I have an old turntable (with red and white RCA outputs). I don't have a pre-amp, but do have newer receiver with most all ouputs. For software, I have Garageband, Roxio Toast 5 (for OS 9), and Audacity. None of these have decent enough "help" functions, although I have read each several times.
I think my core issue might be wires, but not sure. I have tons of wires, including
1) DAC100 Analog to Digital Video adapter, which works well with videos..but I can't find manual to help see if it can work with audio
2) "Y adapter". One side has female RCAs of Y, R, and W. Other side has Yellow (video) and Black (audio) plug. This seems to plug into the computer OK. (I think this should work as well as imic)
Can someone point me to a good detailed instruction of how to get this to work? This should not be that hard.
Thanks!! David

A new receiver very often does not have the correct pre-amp for old turntables.
Did you verify this?
If your amplifier/receiver does not have a special connection for turntables, the audio might have lack of low frequencies.
This Wiki tells you more about the necessary RIAA equalization:
http://en.wikipedia.org/wiki/RIAA_equalization
If your amplifier/receiver is OK for the job, the cable you described should work.
Select the input in System Preferences>Sound, fire up Audacity and you're ready to record.
Sounds simple, but you might encounter several problems.
Audacity isn't my first choice. It's a good fairly good sound editor, but lacks easy settings for recording an entire LP and splitting it in tracks.
My iMac doesn't have an audio input, so I've used an iMic to digitize my vinyl records. The accompanying software (Final Vinyl) makes it a lot easier (even has a setting for RIAA correction). I didn't use it though.
I used my old amplifier as the source for the iMic and used CD Spin Doctor (part of Toast 6 and 7) to record the LPs and split them into the correct tracks.
Unfortunately, there is no standard 'recipe'
M
17' iMac 800 MHz, 768 MB RAM, 200 GB HD, DL burner Mac OS X (10.4.8) iTunes 7.0.2

Trying to open an important message through my adobe reader on my iPad keep saying document is policy protected very important document need to get it open what do I do

Trying to open a very important message through my adobe reader on my iPad very important document says policy protected every time I try to open it what can I do need to read this message

What is the full and exact message you are getting?
[topic moved to iOS subforum]

Syncing iPod to new user account-need advice

Hey All! I set up a new user account for my friend on my imac, so he will want to sync his iPod Touch to iTunes, iPhoto, iCal, etc. in his new user account. I know there are plenty of freeware and shareware apps to get his music from the iPod into iTunes, but need advice concerning everything else oh his iPod.
I know I'll first get that pop up window that says his iPod is synced to another computer, and that I use "cancel" rather than "sync and erase". After doing that, I guess I use one of the shareware apps to get the music transferred over.
Now, after that, if I do a regular sync, will iTunes transfer his apps that are on the iPod?
Do I need to open iPhoto and download the photos on his iPod into iPhotot before doing a sync?
What about text messages? Will they remain in tact?
I don't think he uses the calendar on his iPod so no worries there....
What about Playlists that he has on the iPod? Will just the music transfer with the shareware apps or playlists also?
Will Notes be saved?
Thanks for your help. Don't wanna screw up his iPod by setting up this user account for him.

Apps are tied to the ID I assume the new account is just on the iMac and not a new iTunes account?
Yes, you can import photos into iPhoto the same as you would off any camera.
You would need to transfer purchased content (like apps). You can't do that via sync as it's a new computer and all content will be erased as you are aware.
http://support.apple.com/kb/ht1848
What happened to your friends computer? Was there no backup?

BRAND NEW APPLE USER IN DESPERATE NEED OF HELP IMPORTING VIDEOS FROM JVC!!!

I have an older JVC Everio. I have probably had it for 3 or 4 years. I don't exactly remember. Anyway, I have always used Dell products and they were tough to download videos to as well. What my issue is is that I have a Free Agent External Hard Drive with all my video files saved in the JVC .MOD format. When I open iMovie (version 7.1.1) and try to import the files from the external hard drive it doesn't even recognize these files as video files. I am no computer wizard (maybe that is obvious) and I could really use some basic help. I want to love this machine. I bought it for the video/photo capabilities. I shoot a Canon XTi 10.2 Rebel and have about 10,000 photos saved on the same external hard drive. I am looking forward to learning how to do this, but could use some much needed advice!!
Thanks!
Hoov

I believe this is what you want.
And, here's another: MPEG Streamclip .
The Cyberlink Prodirector software that came with the CamCorder or is available from JVC will also convert to other formats, but it isn't a Mac compatible program.
And, this site outlines how to import the files into iMovie.
Message was edited by: Kappy

Need help to import and syncronize HCM pagelets with Interaction Hub, how can I do that?

Hi,
I need help to import and synchronize HCM pagelets with Interaction Hub, how can I do that? The default page "Select Remote Content" of the WorkCenter "Unified Navigation WorkCenter" is not working as well, when I run the import/sync button I get the following error message:
Integration Gateway: General Connection Failed (158,10836)
This error is thrown when there is no valid response.
Possible errors include:
Bad gateway URL
Sync Service Timeout set and Service actually timed out.
Java exception thrown - Check Application Server for possible Java exception

Do you have integration configured between the two systems? It sounds like you don't from the error. Here is a walk-through on setting up Unified Navigation although it assumes you have integration already working. If you haven't done that, it's documented a hundred different places.
http://remotepsadmins.com/2013/03/04/peoplesoft-unified-navigation-with-peoplesoft-applicatations-portal-interaction-hub/

Help Needed - FINAL PROJECT - SAAJ MESSAGING

Hi there!
currently im doing my final project and it involves sending and receiving soap messages.
im working with sun java studio creator for the first time.
i have done this example (excuse me for possible dumb errors im just a noobie):
* Page1.java
* Created on 6 de Novembro de 2006, 12:40
package webapplication1;
import com.sun.rave.web.ui.appbase.AbstractPageBean;
import com.sun.rave.web.ui.component.Body;
import com.sun.rave.web.ui.component.Form;
import com.sun.rave.web.ui.component.Head;
import com.sun.rave.web.ui.component.Html;
import com.sun.rave.web.ui.component.Link;
import com.sun.rave.web.ui.component.Page;
import javax.faces.FacesException;
import com.sun.rave.web.ui.component.Button;
import com.sun.rave.web.ui.component.TextArea;
//soap saaj
import javax.xml.*;
import javax.xml.soap.*;
import java.net.URL;
import java.net.*;
import java.util.*;
import javax.xml.soap.SOAPConnectionFactory;
import javax.xml.soap.SOAPConnection;
import javax.xml.soap.MessageFactory;
import javax.xml.soap.SOAPMessage;
import javax.xml.soap.SOAPPart;
import javax.xml.soap.SOAPEnvelope;
import javax.xml.soap.SOAPBody;
import javax.xml.soap.SOAPElement;
// add this import if you need soapaction
import javax.xml.soap.MimeHeaders;
import javax.xml.transform.TransformerFactory;
import javax.xml.transform.Transformer;
import javax.xml.transform.Source;
import javax.xml.transform.stream.StreamResult;
import com.sun.xml.messaging.saaj.*;
import java.net.URL;
import javax.xml.soap.*;
import java.util.Iterator;
import javax.xml.soap.Name;
import javax.xml.soap.MessageFactory;
import javax.xml.soap.SOAPMessage;
import javax.xml.soap.SOAPBody;
import javax.xml.soap.SOAPPart;
import javax.xml.soap.SOAPEnvelope;
import javax.xml.soap.SOAPBodyElement;
import javax.xml.messaging.ReqRespListener;
import java.text.NumberFormat;
import javax.xml.transform.TransformerFactory;
import javax.xml.transform.Transformer;
import javax.xml.transform.Source;
import javax.xml.transform.stream.StreamResult;
import com.sun.xml.messaging.saaj.*;
* Page bean that corresponds to a similarly named JSP page. This
* class contains component definitions (and initialization code) for
* all components that you have defined on this page, as well as
* lifecycle methods and event handlers where you may add behavior
* to respond to incoming events.
import javax.xml.messaging.JAXMServlet;
//extends JAXMServlet
public class Page1 extends AbstractPageBean implements ReqRespListener{
// <editor-fold defaultstate="collapsed" desc="Creator-managed Component Definition">
private int __placeholder;
* Automatically managed component initialization. WARNING:
* This method is automatically generated, so any user-specified code inserted
* here is subject to being replaced.
private void _init() throws Exception {
private Page page1 = new Page();
public Page getPage1() {
return page1;
public void setPage1(Page p) {
this.page1 = p;
private Html html1 = new Html();
public Html getHtml1() {
return html1;
public void setHtml1(Html h) {
this.html1 = h;
private Head head1 = new Head();
public Head getHead1() {
return head1;
public void setHead1(Head h) {
this.head1 = h;
private Link link1 = new Link();
public Link getLink1() {
return link1;
public void setLink1(Link l) {
this.link1 = l;
private Body body1 = new Body();
public Body getBody1() {
return body1;
public void setBody1(Body b) {
this.body1 = b;
private Form form1 = new Form();
public Form getForm1() {
return form1;
public void setForm1(Form f) {
this.form1 = f;
private Button button1 = new Button();
public Button getButton1() {
return button1;
public void setButton1(Button b) {
this.button1 = b;
private TextArea textArea1 = new TextArea();
public TextArea getTextArea1() {
return textArea1;
public void setTextArea1(TextArea ta) {
this.textArea1 = ta;
private TextArea textArea2 = new TextArea();
public TextArea getTextArea2() {
return textArea2;
public void setTextArea2(TextArea ta) {
this.textArea2 = ta;
// </editor-fold>/*
public MessageFactory messageFactSent= null;
public MessageFactory messageFactReply=null;
public MessageFactory messageFactReceiv= null;
public SOAPConnectionFactory soapConnectionFact;
public URL URLendpoint;
public SOAPConnection connection ;
public SOAPMessage messageSent;
public SOAPPart soapPartSent;
public SOAPEnvelope soapEnvelopeSent;
public SOAPBody SoapBodySent;
public SOAPMessage messageReceiv;
public SOAPPart soapPartReceiv;
public SOAPEnvelope soapEnvelopeReceiv;
public SOAPBody SoapBodyReceiv;
public SOAPMessage messageReply;
public SOAPPart soapPartReply;
public SOAPEnvelope soapEnvelopeReply;
public SOAPBody SoapBodyReply;
public SOAPMessage reply;
public String StringAux="";
public final String theURI = "http://172.16.5.223:8080/WebApplication1/";
//public final String theURI = "http://172.16.5.223:8080/WebApplication1/";
//public final String theURI = "http://172.16.5.193:8080/WebApplication1/";
//http://localhost:8080/WebApplication1/faces/Page1.jsp
public SOAPMessage onMessage(SOAPMessage message) {
StringAux=StringAux+"On message called in receiving servlet\n";
this.textArea1.setValue(StringAux);
try {
soapPartReceiv = message.getSOAPPart( );
soapEnvelopeReceiv = soapPartReceiv.getEnvelope();
SoapBodyReceiv = soapEnvelopeReceiv.getBody();
//analise...if needed
// Create the reply message
messageReply = messageFactReply.createMessage();
soapEnvelopeReply = messageReply.getSOAPPart().getEnvelope();
SoapBodyReply= soapEnvelopeReply.getBody();
// Remove empty header from the Envelope
soapEnvelopeReply.getHeader().detachNode();
Name bodyName = soapEnvelopeReply.createName("GetLastTradePrice",
"m", "http://wombat.ztrade.com");
SOAPBodyElement gltp = SoapBodyReply.addBodyElement(bodyName);
Name name = soapEnvelopeReply.createName("symbol");
SOAPElement symbol = gltp.addChildElement(name);
symbol.addTextNode("SUNW");
// Return a reply message back to the JAXM client
StringAux=StringAux+"devolveu menssagem\n";
this.textArea1.setValue(StringAux);
return messageReply ;
} catch(Exception e) {
StringAux=StringAux+"Error in processi ng or replying to a message - e: " + e+"\n";
this.textArea1.setValue(StringAux);
return null;
//this.getBean(name)
public Page1() {
// Service serve=new Service();
// Client cli=new Client();
// this.textArea1.setValue(serve.GetAux());
// this.textArea2.setValue(cli.GetAux());
// Create a MessageFactory
try {
URLendpoint=new URL(theURI);
StringAux=StringAux+"depois de criar o endpoint \n";
//Create SOAP connection
soapConnectionFact = SOAPConnectionFactory.newInstance();
connection = soapConnectionFact.createConnection();
// Create a message from the message factory.
messageFactSent = MessageFactory.newInstance();
messageFactReply = MessageFactory.newInstance();
messageFactReceiv = MessageFactory.newInstance();
StringAux=StringAux+"depois de criar as message factory \n";
this.textArea1.setValue(StringAux);
} catch(Throwable e) {
StringAux="erro2!\n"+StringAux+e.toString()+"\n";
this.textArea1.setValue(StringAux);
* Return a reference to the scoped data bean.
protected ApplicationBean1 getApplicationBean1() {
return (ApplicationBean1)getBean("ApplicationBean1");
* Return a reference to the scoped data bean.
protected RequestBean1 getRequestBean1() {
return (RequestBean1)getBean("RequestBean1");
* Return a reference to the scoped data bean.
protected SessionBean1 getSessionBean1() {
return (SessionBean1)getBean("SessionBean1");
* Callback method that is called whenever a page is navigated to,
* either directly via a URL, or indirectly via page navigation.
* Customize this method to acquire resources that will be needed
* for event handlers and lifecycle methods, whether or not this
* page is performing post back processing.
* Note that, if the current request is a postback, the property
* values of the components do not represent any
* values submitted with this request. Instead, they represent the
* property values that were saved for this view when it was rendered.
public void init() {
// Perform initializations inherited from our superclass
super.init();
// Perform application initialization that must complete
// before managed components are initialized
// TODO - add your own initialiation code here
// <editor-fold defaultstate="collapsed" desc="Creator-managed Component Initialization">
// Initialize automatically managed components
// Note - this logic should NOT be modified
try {
_init();
} catch (Exception e) {
log("Page1 Initialization Failure", e);
throw e instanceof FacesException ? (FacesException) e: new FacesException(e);
// </editor-fold>
// Perform application initialization that must complete
// after managed components are initialized
// TODO - add your own initialization code here
* Callback method that is called after the component tree has been
* restored, but before any event processing takes place. This method
* will only be called on a postback request that
* is processing a form submit. Customize this method to allocate
* resources that will be required in your event handlers.
public void preprocess() {
* Callback method that is called just before rendering takes place.
* This method will only be called for the page that
* will actually be rendered (and not, for example, on a page that
* handled a postback and then navigated to a different page). Customize
* this method to allocate resources that will be required for rendering
* this page.
public void prerender() {
* Callback method that is called after rendering is completed for
* this request, if <code>init()</code> was called (regardless of whether
* or not this was the page that was actually rendered). Customize this
* method to release resources acquired in the <code>init()</code>,
* <code>preprocess()</code>, or <code>prerender()</code> methods (or
* acquired during execution of an event handler).
public void destroy() {
public String button1_action() {
try {
StringAux=StringAux+"antes de criar a messagem para enviar\n";
messageSent = messageFactSent.createMessage();
soapEnvelopeSent = messageSent.getSOAPPart().getEnvelope();
//SoapBodySent = messageSent.getSOAPPart().getEnvelope().getBody();
SoapBodySent = soapEnvelopeSent.getBody();
Name bodyName = soapEnvelopeSent .createName("GetLastTradePrice",
"m", "http://wombat.ztrade.com");
SOAPBodyElement gltp = SoapBodySent.addBodyElement(bodyName);
Name name = soapEnvelopeSent.createName("symbol");
SOAPElement symbol = gltp.addChildElement(name);
symbol.addTextNode("SUNW");
StringAux=StringAux+"\nContent of the message: \n"+messageSent.toString()+"\n";
// Send the SOAP message and get reply
StringAux=StringAux+"Sending message to URL: \n"+ URLendpoint+"\n"+this.URLendpoint.getPath()+"\n";
reply = connection.call(messageSent,URLendpoint);
StringAux=StringAux+"\n\n Content of the reply message: \n"+reply.toString()+"\n";
this.textArea1.setValue(StringAux);
//tratamento da resposta
connection.close();
} catch(Throwable e) {
StringAux="erro!\n"+StringAux+e.toString()+"\n";
this.textArea1.setValue(StringAux);
return null;
Very simple , on a click of the button a message was supost to be sent. and receive on the other machine. i have launched the same war file on both pcs
but now nothing happens just a exception message
com.sun.xml.messaging.saaj.SOAPExceptionImpl: java.security.PrivilegedActionException: com.sun.xml.messaging.saaj.SOAPExceptionImpl: Invalid Content-Type:text/html. Is this an error message instead of a SOAP
....could someone help me out here ,even share a wprking project with this goal
thank you in advance
DMS
Message was edited by:
DaniDaOne

One time, after quitting IM and re-launching it later, my project disappeared from the project list.
Apple Support told me to do this.
1) quit IM
2) with the finder, move the project out of the project directory
3) launch IM
4) quit IM
5) with the finder, put the project back into the project directory
6) launch IM
My project re-appeared. He said these steps forces a project index to be rebuilt.
Your symptoms are different but maybe the cure is the same --- good luck.

Mail and address book crashes with SL, not able to import messages

Hi,
I've got about 10 years of email messages current inaccessible since I upgraded to SL.....
Currently, Mail and Address book both crash upon opening.
I don't need address book because luckily I have jettisoned that program, but I do need to somehow extract my sent messages from mail.
I've already taken these steps to try to get it working again and re-import my messages
-> deleted com.apple.mail, com.apple.addressbook preference files
--> moved mail folder to the desktop
--> deleted mail and address book folders within "application support" folders
I'll be happy if I can find a way to simply open mail and re-import the messages, but so far, I'm locked out. The furthest I can get is the "import" command from within mail, and then I get the spinning beachball.
Something seems to be deeply messed up within my addressbook/mail world, and it doesn't even want to start importing messages without crashing.
any ideas?
thanks
I can't

We have not tried a user account, we can if you think it is worth the time?
50/50 chance of a clue.
If I install mail and/or AB, do I need to move the data files for those first so that they are not wiped out? What about upgrades for those once we install or is the install disk and the current version the same.
Normally it's not a problem, but Archive/Compress/backup just the same.
Wait on the upgrades until we straighten this out.
Or do we do a new install on a partition on another disk? Then migrate files over if the works (mail, AB, itunes, photos...)? Might need to guide me a bit on this?
Excellent Idea if you hace another botable Disk, Install to that one, on first boot it'll ask if you want to Migrate, Migrate everything!
If you want to go that way and need assistance, just ask.

Need help for importing oracle 10G dump into 9i database

hi, Someone help me to import oracle 10G dump into 9i database. I'm studying oracle . Im using oracle 10G developer suite(downloaded from oracle) and oracle 9i database. I saw some threads tat we can't import the higher version dumps into lower version database. But i'm badly need help for importing the dump...
or
someone please tell me the site to download oracle 9i Developer suite as i can't find it in oracle site...

I didnt testet it to import a dump out of a 10g instance into a 9i instance if this export has been done using a 10g environment.
But it is possible to perform an export with a 9i environment against a 10g instance.
I am just testing this with a 9.2.0.8 environment against a 10.2.0.4.0 instance and is working so far.
The system raises an EXP-00008 / ORA-37002 error after exporting the data segments (exporting post-schema procedural objects and actions).
I am not sure if it is possible to perform an import to a 9i instance with this dump but maybe worth to give it a try.
It should potentially be possible to export at least 9i compatible objects/segments with this approach.
However, I have my doubts if this stunt is supported by oracle ...
Message was edited by:
user434854

Mail fails to import messages after 10.8.5 update

After the update Mail fails to import my messages and then quits.
First screen says: Welcome to Mail. To use the new features your existing Mail messages need to be imported....
Then when I click continue it says: The import failed. An error occurred during the import. Make sure you have available space in your home folder and try again.
I run mail from inside the container (MacOS folder) and here's what it reads:
Last login: Mon Oct 21 22:39:50 on ttys001
/Applications/Mail.app/Contents/MacOS/Mail ; exit;
Gustavos-MacBook-Air:~ calazans$ /Applications/Mail.app/Contents/MacOS/Mail ; exit;
2013-10-21 23:03:45.907 Mail[778:707] Using V2 Layout
2013-10-21 23:04:43.483 Mail[778:9617] Copy from /Users/calazans/Library/Mail/V2/MailData/Envelope Index to /Users/calazans/Library/Mail/V2/MailData/Envelope Index-26 failed with 10: not an error
logout
[Process completed]
I have already reinstalled combo 10.8.5
I have already booted on recovery console and repaired permissions
I have already installed the Supplemental update 10.8.5
I have created another standard user and inside this new account Mail will work perfectly.
Nothing worked so far. Cherry on the cake : I have a message saying I have a recall on my MBAir SSD drive.
Please advise on how to solve this issue !
Cheers,
ZChef

Intermediate answer: The app launched correctly and the import process has started.
It is taking ages though. Over 3 hours for around 30K messages.
The message count sometimes gets stuck for 20-30 minutes or so and then starts counting again...
There are ~5K messages left to be imported. I'll let you know if it goes ok.
Stay tuned for the next and hopefully last episode.
Cheers,
ZChef

Need to get deleted messages back!!! urgently

Hey accidently deleted all messages and imessages froma contact i would like to get them back! is this possible? if so how do i do it? i have been backing up my iphone all the time.... however my bro did a delete back ups thing... the in itunes>edit>preferences etc.. way does this effect it at all?
Very very important messages from that contact and need to get them back asap!!!!!

If you deleted the SMS on your phone, & your iPhone backup has also been deleted, there is no way to restore this SMS.

Issues importing messages from live mail

I am having problems importing messages from my WIndows Live Mail to my Thunderbird. The instructions say go to "Tools ImportExport | Import all messages from a directory | Also from its subdirectories." However in my Thunderbird l have tools, import and then it takes me to a wizard which says "This wizard will help import messages....." and when l select 'mail' as the type l wish to import it asks for a type of mail l want to import. Windows Live Mail is not in the list. Do you have any instructions or advice?

Those instructions assume that you have installed [https://addons.mozilla.org/en-us/thunderbird/addon/importexporttools/ ImportExportTools].
http://chrisramsden.vfast.co.uk/3_How_to_install_Add-ons_in_Thunderbird.html
Or, if you can export the WLM mail to eml files, they can be dragged from their Explorer location and dropped in a TB folder.

Need advice on importing message...

Similar Messages

Maybe you are looking for