Need Advice on LabVIEW as career

Hi all my question is really simple. I enjoy doing LabVIEW and want to do more and more work because I enjoy working with it. Any suggestions please that how can develop my self more and more in it and what about doing it for living ..I've been working on LabVIEW for 1 year now for my different university level projects. Is there any way other than this forum also where I can polish my LabVIEW skills more. Hope you people will guide me through.Thanks in advance.
Naqqash

Although LAVA can be interseting in an achademic way, the traffic is too low to get any real pratcie working for that forum.
While you are still developing your skills the NI forum are a good place to do your prep work. After you get good and can answer all of the question on the NI side, then LAVA is the next step.
Find a "Pet Project"
This should be a project that YOU really want and is beyond your current skill set. Work on it regulalry and post up if you get stuck. You can study all day and night but a real project is the best thing for my learning plans.
How I suggest using the NI forum:
1) Get your basics together. Durring this phase you should gird-up your loins and let people beat you up. If someone honors you by posting your code to the Rube Goldberg thread, you will be getting specail attention. Durring this phase you should find thread that you know the answer and you should code up and POST AN IMAGE of your solution. If none of the frequent flyers jump on your, don't feel bad, you probalbly got it right. If they jump on you, listen to why and re-code as per the suggsetions.
Don't let the quesion already being answered stop you from coding and posting. This will help others by seeing the code and will let you check that you understood the ideas.
2) When you get past the basics start taking a chance on stuff that you are not sure about. Don't claim to have the answer but mention that you are just trying. Again watch for the experienced contributors to critique your code.
3) Start "teasing the bears" and review answer that you think you understand but your idea differs from that posted by the others. By knocking heads with the experieinced developers you will be helping them by keeping them honest, and maybe your idea will actually be better.
4) Write a Nugget. If your Nugget is well recieved, you are there!
5) Sign-up for LAVA and start all over again.
PLEASE REMEMBER
The only persons ever "tar and feathered" on this forum were people that thought the new everything and communicated this fact regularly ("Those that think they know everything are particularly iritiating to those of us who do." Author unknown) So stay humble and hope someone beats you up.
Just trying to help,
Ben
PS: Please not I am NOT knocking LAVA. I am one of the active contributors there as well and post under the name "neBulus".
Message Edited by Ben on 10-26-2009 09:22 AM
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction

Similar Messages

Need advice on SAP BW career

Hi everyone, i just wanted your opinion on some SAP BW career questions,
1) Do i need to start with SAP FI/CO and then towarsd SAP BW in irder to become a real SAP BW professional or starting directly from SAP BW would be ok?
2) Do i need to know SQL language?
3) Do i need to know ABAP language?
Thanx for you inputs.

Hi
1) Do i need to start with SAP FI/CO and then towarsd SAP BW in irder to become a real SAP BW professional or starting directly from SAP BW would be ok?
Desirable but not required
2) Do i need to know SQL language?
Desirable but not required
3) Do i need to know ABAP language?
Very helpful but not necessity
Assign points if useful
Regards
N Ganesh

Need advice about Labview and NI certifications

Hi all I am a student. In the process of learning the LABVIEW. I've been working on it for about 3 to 4 months. From internet, examples, tutorials on NI site and now on forum also. Just thought why don't I should ask you people where to start and any books you think will help. My intentions are toward CLAD and then CLD. Any advice. Thanks in Advance.
If I am posting it on wrong board please tell me where to post.
Message Edited by Naqqash_IIEE on 03-13-2009 01:57 PM
Naqqash

As far as books are concerned my three favorites are:
LabVIEW for Everyone
The LabVIEW Sytle Book
A Software Engineering Approach to LabVIEW
I have taken both the CLAD and the CLD exam. A person who has a good understanding of the LabVIEW fundamentals will be able to pass the CLAD exam. To see if you have a good understanding of the fundamentals you should do as Smercurio suggests and take the example tests. To pass the CLD exam you have to have a good understanding of LabVIEW Style, and be able to implement it while writing a program that would normally take 8 hours in 4 hours. With the CLD if you take the available practice exams and pass them (you will have to grade them yourself, which is a good way to brush up on style) then you are probably ready to take the exam. It does not mean that you will pass it though. It seems to me that the time limit is the killer with the CLD.
CLA, CLED, CTD,CPI, LabVIEW Champion
Platinum Alliance Partner
Senior Engineer
Using LV 2013, 2012
Don't forget Kudos for Good Answers, and Mark a solution if your problem is solved.

Need advice on Career in SAP after completing 9 yrs in IT mainly in Telecommunication Domain with BMC Remedy Tool knowledge

Need advice on Career in SAP after completing 9 yrs in IT mainly in Telecommunication Domain with BMC Remedy Tool knowledge.
Which Module of SAP I can learn and get into as I have Tool based knowledge in BMC Remedy and fair knowledge in SQL, as I come from non-IT background. What are career prospect after completing any SAP module now will my previous experience will be taken into account?

Prashant,
One of the reasons nobody has replied to you yet is that, this is a question with so little information provided.
- There is no mention of your education background.
- Your work background is very vague.What exactly did you do in Telecommunication Domain?
- What exactly did you do in BMC Remedy? Where you just an end-user or did you do any background support work?
- What exactly did you do in SQL? Did you work on it or did you just attend training?
- Why do you want to jump into SAP? And what precisely you want to jump into in SAP?
- What are your interests? Technical or Non-technical?
- What's your career objective? Where do you want to be 5 years from now?
Without providing these information how can anyone help you? Picking a module and going with it makes no sense. What if you spend an insane amount of time and money learning a module in SAP (based on some random suggestions given here) and realize that this is not what you were looking for, or there is little scope for that module in the market? What then?
It's your career that you are planning. It definitely deserves more thought-process and planning to go into.
pk

Simple Question, need advice. BOBJ vs. BI

I didn't know where to post this, but I need advice.
I have been working as a SAP BI Developer for past 2 years. I have an opportunity to transition into BOBJ (means I will not be in BI team).
Wanted to know if this is a good career move, but have few questions.
1) Which is easier BOBJ or BI?
2) Which is more in demand and will be for next 10 years?
3) I've heard that there's a very high chance to work from home as a BOBJ Developer compared to BI Developer? True/False?
4) Is pay for either the same?
Thanks in advance.

"Having extra cores will be a distinct advantage..." ?
Better optimized to take advantage or to handle the scheduling of threads?
Right now, it is a mixed bag and give applications a year to be recompiled and optimized - or longer. The transition to Leopard also has taken more than a year to get where it is.
I would not discount last year's 2.8GHz 8-core as a better buy and value.
http://store.apple.com/us/browse/home/specialdeals/mac/mac_pro
Why 10.5.7 now runs better
http://www.hardmac.com/news/2009/05/15/did-mac-os-x-10-5-7-modify-management-of- multithreaded-tasks

Looking for some help/advice on LabVIEW

Hello, I'm completely new to LabVIEW but have a project to do and was wondering if anyone could give me some help/advice/ideas.
I need to use LabVIEW to interface with a power meter (Agilent E4419B) via a GPIB cable. I have a GP10 card. I have the drivers from the NI website. Can anyone think of any other software/hardware I may require? Or any advice about the best way to go about this from experience?

Yeah sorry I am being very vague!
Basically I am wondering how you actually go about setting up LabVIEW to communicate with the meter - is all I need a GPIB card and cable? How do the drivers actually work? Do I need to use any different commands to interact with the meter or do the drivers serve this purpose?

HELP: New to Mavericks. Need advice on setting up secure user accounts

Hi,
I need advice on how to best set up user accounts on Mavericks.
I must set up an Administrative account...Any suggestion for best settings here to protect against targeted malicious exploits?
I would also like to set up two user accounts for everyday work with applications and Internet browsing done in such a way that the machine would be protected from malicious attacks but with a minimum of inconvience for the users ( myself and my wife ).
Thanks

Hi hassiman, any exploits will come in the form of users downloading suspect pieces of software like browser add-ons and extensions, device drivers and non-trusted apps.
Make sure that you do not use the admin account for any day to day use
Create two normal user accounts, one for each of you and use them day to day
When using the admin account to set up your system, pay very careful attention to the System Preferences > Privacy & Security area. There are various things to set up properly here:
There are three settings for how people can download software, 1) From Mac App Store only, 2) From App Store and registered developers and 3) from anyone. It defaults to 2) but check it and if you feel uncomfortable with that, set it to 1). This might prevent you from downloading and installing software you think you might need; but think carefully about wether you really need it and therefore wether you should temporarily allow it via a lower setting.
For the firewall, if you dont have a firewalled internet gateway device (a wireless router or similar), make sure the firewall is turned on. Most internet connection equipment does have such a firewall; make sure it is blocking any incoming connections by using its admin tool (usually a web browser interface). Consult its documentation for details.
Whenever OS X asks for a password to complete a task of any kind, look carefully at what is making it ask and if you aren't sure, don't go through with it; it is usually wanting the admin account name and ppassword to complete some kind of system modification (install, config etc.).
Make sure that you are both aware of the danger of installing any software that wants to add itself to your system or web browser. Things like custom search bars, extensions etc. If you are viewing a web page and it says you need "x" to see it or use it properly, make sure you really need to use that web site; otherwise don't do it.
It really all comes down to common sense; the worst security breaches and damage come from users who don't know what to do, but they still click "OK" when they should be clicking "cancel" or "close". Make sure you and your wife are fully aware that responsibility lies with yourselves. It is better to take a minute to decide wether to install something (even if it's 20 times a week) than spend days fixing a compromised system.

Need advice about certification: do J2SE 1.4 or wait for 1.5 to go out?

I need advice here! I am studing for Java Programmer certification (310-035) and I know now that the certification does not have any expiration date, instead it's version based. So, if I get now a J2SE 1.4 certification, soon it will be outdated... I guess!
Does anyone know or have any ideia of WHEN java 1.5 sdk will be avaliable, and anyone can tell me how long it will take for a new 1.5 programmer certification be avaliable for general public?

Do both. 1.5 is far enough away that you do not want to wait for it.
And besides, 1.5 has enough new stuff in it that you'll want to recertify anyway.

Need advice on on a Mac Pro 1,1 Media Center

I currently have a 2009 Mac Mini running as my home media center, but I recently came by a FREE Mac Pro 1,1 and have decided to repurpose it as my media center so I can migrate my Mac Mini to my bedroom TV where it will live an easy life doing nothing but run Plex Home Theater, Netflix, and EyeTV. This machine falling into my lap was also quite timely because my 4-bay Drobo is running low on available expansion and another Drobo isn't in the budget at the moment.
This vintage mac pro is running Lion 10.7.5, has 1 old and crusty 500GB hardrive, dual x5160 processors, 4GB RAM (one stick i'm pretty sure is toast judging by the red light and the kernel panics), and the standard NVIDIA GeForce 7300 GT 256MB graphics card. It will be used primarily for the following: network storage for iphoto and itunes libraries, streaming video, Plex Media Server & Plex Home Theater, and Handbrake encoding. I also have a goal of safety of data for my movies, photos and music as this machine will supplement my current Drobo storage.
My plans are for a 128GB SSD boot drive installed in one of the PCIe slots and then to load up all 4 of the 3.5" drive bays with WD Green hard drives. I have also ordered 4GB of replacement RAM, so upon removal of the faulty unit I will have 7GB.
Here is where I need advice because I am not very familiar with RAID and the differences between hardware or software raid. Am I better off getting four drives of the same size and setting them up as RAID 5 (I think) using Apple's RAID utility or should I throw in three 1TB drives and then install a fourth 3TB or 4TB drive as a Time Machine backup for the other three?
Should I upgrade the OSX to the technically unsupported latest version? Or is it not worth the trouble for this application?
Also, is there any benefit to upgrading the graphics card to the ATI Radeon 5770? Would this yield an improved image quality? I am outputting to a Denon AV Reciever and subsequently to a 100" projection screen, if that makes a difference. I also noticed the 5770 has an HDMI port, wich would be nice, but not necessary since I can use a DVI converter and woud still need to use the optical audio out anyway.
Much obliged for any input

My plans are for a 128GB SSD boot drive installed in one of the PCIe slots and then to load up all 4 of the 3.5" drive bays with WD Green hard drives. I have also ordered 4GB of replacement RAM, so upon removal of the faulty unit I will have 7GB.
PCIe cards that use or support SSD are not bootable until you get to 2008 (and that is limited too).
Green are not suited for any form of array unless say NAS and WD RED. Better option would be 3 x 2TB WD Blacks in a mirror, and too many people only use two drives, well 3 is much easier safer and works better. Might want to invest in www.SoftRAID.com product even.
Best price and quality, got my 1,1 with 8 x 2GB (ideal is 4 or 8 DIMMs)
2x2GB FBDIMM DDR2 667MHz @ $25
http://www.amazon.com/BUFFERED-PC2-5300-FB-DIMM-APPLE-Memory/dp/B002ORUUAC/
With price of 250GB SSD $155 I'd go with that or stick with $89 for 128GB .

Need advice on video software.

Need advice on video software.
I currently use adobe elements 3 and have done so for a few years now with no problems. my os is XP and my system is a couple of years old, but we do have a brand new win7 machine in the house.
I am currently look at Cyberlink PowerDirector 8 Ultra OR Adobe Premiere Elements 8. Reviews for both softwares seem very good BUT, when I dig deeper into user reviews instead of editor reviews do I find problems.
Major problems with program crashing all over the place, at start up etc, and it is still not getting along with any win7 machine? Major problems with drivers. Honestly, I do not want to have to jump through dozens of hoops to get any software to run. After I pay for it, it should run, period.
Has anyone else here used both softwares and can you give an honest opinion of each?
I am also asking these same questions on the cyberlink site.
I would like to upgrade my video software to take advantage of the new features that are coming out but I really don't want a big headache trying to run one or the other. To be fair, when I bought adobe elements 3 I had also bought pinnacle, which has gathered dust since my first week with it, which is why elements was purchased. That was money wasted and I do not wish to repeat this. I would like to go with Premiere Elements 8 but remain very unsure.

If your newer machine is Win7 64-bit, it might be worth waiting for SP-1 to be issued, and then hope that 64-bit drivers are fully included. The 64-bit drivers now seem t be an issue at this point, and that will affect any NLE program.
Also, and regardless of which particular program you choose, optimizing your computer, the OS, the hardware, and the resources management, will go a very long way to insuring success. Few programs can tax a computer, as an NLE can - any NLE. Video and Audio editing will stress your system, like almost nothing else can, except for heavy-duty CAD, or 3D work, though those are usually done only on specialized, optimized computers, designed just for those applications.
Not the specific advice that you seek, but it's the best that I can do.
Good luck,
Hunt

I need advice: I love my apple TV. But my laptop at home, only has a 750gig hard drive. Is there a possibility of having all my media on an external hardrive to still connect to the Apple TV?

I need advice: I love my apple TV. But my laptop at home, only has a 750gig hard drive. Is there a possibility of having all my media on an external hardrive to still connect to the Apple TV?
Is there like in a hard drive of which iTunes can read the media, which will not require me to add and delete media onto iTunes, because of a lack of space on my laptop?

just get an ext HD, and point your itunes library to that drive so now you'll just keep all your media on this ext

JMS to Synchronous Web Service Scenario (Need Advice to use BPM or Not)

Hi Experts,
We have a scenario where we fetch data from JMS Sender and Send it to MDM Webservices.
We want to have the files processed in such a way that until we get a response from webservice back that it was sucessful ,then only we need to process the next file.
We would need advice as can we use BPM for this.
We are thinking of having BPM like this:
RecieveStep(Asyn)-SynchronousSend Step(with wait)-Stop
The problem with this is when processing huge files the processing time of the Queue is taking very long and sometimes we are getting SYSFAIL.
Please would anyone advice as how can we approach this scenario either using BPM or without.
Also Can we use multiple queues or multpile instances concept for this scenario.
Please Advice.
Thanks in Advance
Regards
J

Hi Prateek,
Thank you very much for your quick reply.
The response from Webservice does not need to be sent anywhere.
We just want that after recieving the response back from webservice(SOAP) then only we need to process the next file.
Can we control something from Sender JMS adapter side as well as it is picking up all the files and all files wait at BPE until each one gets processed.
Is this possible without BPM or with BPM.
Please advice as what wud be possible steps inorder to achive it through BPM or Without BPM.
Thanks and Regards,
J

Major Issues with installing 4tb internal. Really need advice please

In the process of a long needed upgrade to my 2010 Mac Pro Quad core 2.8 and have run into a serious headache that I really need advice on so I can get back to work. I've already spent 2 days dealing with all of this...
Just did a new SSD install and Migration which went fine but I'm also updating the rest of the internal drives. My main (non boot) drive was being upgraded from a Seagate Barracuda 3tb to a 4th Deskstar NAS (it was showing as compatible with my desktop, see links below). My 3tb ran fine for years but now due to it being heavily used I want to switch to a new drive and I can also use a bit more space.
The issue I'm running into is that initially on boot, my system was telling me it couldn't recognize the disk and it wasn't even showing up in Disk Utility. I had to purchase a SATA USB 3 kit to attach it as an external to get it to show which worked without problem. With the USB kit I was then able to partition it (GUID, Mac OS extended journaled) and format it properly. After reinserting the drive into my tower as an internal it failed to show again. After a few attempts of restarts and trying various bays it popped up but showed as a non formatted drive and I was told again that the system didn't recognise it. I was then given the option to initialise and was then actually able to then format and partition it though Disk Utility while it was installed as an internal.
Figured that was problem solved but when I went to check the drive and getting ready to transfer files over I noticed that Disk Utility was only allowing the First Aid and Partition options but not Erase, RAID, Restore which I'd never seen before. I then also noticed that none of the drive connection info was in the same format nor will it even provide drive bay info, connection info or read/write status (See screen shots). This is what I can't figure out and really need to clarify before I put full trust into using this drive.
Any info would be greatly appreciated...
Deskstar 4tb internal info which is installed in Bay 2
3tb Seagate which I trying to retire and transfer from.
Here are the weblinks to the Deskstar 4tb drive and the compatibility list but I support isn't allowing me to add direct links so add the www. before hand.
(Drive - eshop.macsales.com/item/HGST/0S03664/) (compatibility list - eshop.macsales.com/Descriptions/specs/Framework.cfm?page=macpromid2010.html).

What OSX version?
Disk Utility in later versions of ML and I think Mavericks have problems formatting with 4 TB internal drives.
http://forums.macrumors.com/showthread.php?t=1661024
http://apple.stackexchange.com/questions/112266/why-doesnt-my-mac-pro-see-my-new -4tb-sata-drive

I'm desperately needing advice to a common question. I use Quicken and love it. But the Mac version is not as great as the PC.   Has anyone installed it by segmenting their Mac with Parallels or Fusion or Boot camp. If so, which one do you recommend.

I'm desperately needing advice. New Mac.   Used Quicken on my PC. Researched all software for Financial programs and Quicken is still the most recommended.   I want to use Quicken on my Mac. The Mac version is not highly rated so I would need to partition my Mac.   Has anyone done this for their quicken program and if so, which partitioning program did you use - Parallels, Fusion ware or Boot camp?
Thx

Lisa Ellies-Laye wrote:
Thanks. Hadn't heard of it. ? Is there any concern installing this free program on my Mac.    Have you used it? Apart from being free is there any other advantage of Parallels and VMfusion. ?
Virtual Box is safe and well developed, it offers similar or identical features to the paid competition, it may be a little less polished but that's all.
Download and try it out, nothing to lose (except time).

TV monitor display project, need advice.

So I will be starting a project soon for my job. It will require some content for a store lobby TV display screen. Basically I will be making some content, whether it be scrolling images, animations, or maybe a video clip playing automatically. I will have maybe all of these things to be played throughout the day in the lobby of my work for customers to be viewing. This is the first time I have taken on a project such as this and I'm not sure where to start. I need advice on what type of information I need in order to begin this such as what size to start my project as, format, etc. Thanks!

Hi,
You have two options:
1. Create the Edge Animation on the Computer, and play the animation and use some screen capture software that will give you a video. This video you can play on your lobby TV in loop.
2. If the lobby TV is a smart tv (i.e. it has browser to navigate the webpage), then you can host the Edge animation content files on some server, and navigate to the server url, which will play the animation on the browser in the TV.
hth,
Vivekuma

Need Advice on LabVIEW as career

Similar Messages

Maybe you are looking for