Need advice on school laptop CPU and RAM
Hello,
I've just started a Multimedia and Design education, where I will be working with Adobe cc - mostly Photoshop, Illustrator and inDesign. I'm looking for a portable laptop to use while in school, and I have found one with a good IPS display and SSD.
My question is, if I should I go with an dual core i5-4210M (2,6Ghz) or a quad core i7-4712MQ (2,3GHz)? - and If I should go for 8GB of RAM or 16GB?
I have googled for hours now and people seem to have very different opinions on what these programs need in order to run good. I realize that more is better, but I want to know if it's necessary.
At home I have a stationary PC with a 4790K, 16GB RAM, GTX 980, SSD +HHD which I will be using for all my work when at home. So the laptop I'm looking to buy is "just" my placeholder while in school - Not 8 hours a day as a job, but as a learning tool that will be sufficient and get the job done when I'm not at home.
I'm really hoping some of you could shed some light on what I should be going for here.
Thanks.
At the very least 16 GB of RAM.
And plenty of HD or SSD available space to accommodate both the Photoshop scratch file and the swap files of your OS.
The rule of thumb I follow to figure out scratch space says to figure on 50 to 100 times the size of your largest file ever multiplied by the number of files you have open. I have seen the scratch file exceed 800 GB once, an admittedly rare occurrence, but it often exceeds 200 GB when stitching large panoramas and the like.
As an example—and stressing that I'm aware that others have even more scratch space than I do—I keep two dedicated, physically separate hard drives as my primary and secondary Photoshop scratch disks and a lot of GB free on my boot drive for the OS. I also have 16 GB of RAM installed.
Additionally, if you only have a single HD, i.e. your boot drive, you'd need it to be large enough to accommodate both the swap files of the OS as well as Photoshop's scratch.
Similar Messages
-
Need advice on laptop CPU and RAM
Hello,
I've just started a Multimedia and Design education, where I will be working with Adobe cc - mostly Photoshop, Illustrator and inDesign. I'm looking for a portable laptop to use while in school, and I have found one with a good IPS display and SSD.
My question is, if I should I go with an dual core i5-4210M (2,6Ghz) or a quad core i7-4712MQ (2,3GHz)? - and If I should go for 8GB of RAM or 16GB?
I have googled for hours now and people seem to have very different opinions on what these programs need in order to run good. I realize that more is better, but I want to know if it's necessary.
At home I have a stationary PC with a 4790K, 16GB RAM, GTX 980, SSD +HHD which I will be using for all my work when at home. So the laptop I'm looking to buy is "just" my placeholder while in school - Not 8 hours a day as a job, but as a learning tool that will be sufficient and get the job done when I'm not at home.
I'm really hoping some of you could shed some light on what I should be going for here.
Thanks.The Cloud forum is not about using individual programs
The Cloud forum is about the Cloud as a delivery & install process
If you will start at the Forums Index https://forums.adobe.com/welcome
You will be able to select a forum for the specific Adobe product(s) you use
Click the "down arrow" symbol on the right (where it says All communities) to open the drop down list and scroll -
Where to see CPU and RAM usage in IPAD 1
Hi:-)
While i have Apps running , I would like to be able to see CPU and RAM in use..and ideas how/where?
ThanksThere are several apps in the app store that can show you cpu and ram usage of your device, e.g. "system info"
-
Z77A-gd65A boot error code 15 rebthing i removed all except cpu and ram and oot
my pc used to work fine yesterday i shut it down and started it today and it kept cycling rebooting at code 15 on debug i changed to bios B and the same thing did clear cmos both ways even removed the battery the same also removed all except cpu and ram but still the same result please help !
I have no idea how you possibly could corrupt bios A if you weren't running Live Update or manually attempted to flash. if bios is really corrupted follow: >>Flashing a Corrupted bios when the alternate bios still works<<
-
How can we see what is the CPU and RAM size for the database?
<div class="jive-quote">select * from v$version</div>
BANNER
Oracle Database 10g Enterprise Edition Release 10.2.0.5.0 - 64bi
PL/SQL Release 10.2.0.5.0 - Production
CORE 10.2.0.5.0 Production
TNS for HPUX: Version 10.2.0.5.0 - Production
NLSRTL Version 10.2.0.5.0 - Productioncat /proc/meminfo
root: total: used: free: shared: buffers: cached:
Mem: 1055760384 1041887232 13873152 0 100417536 711233536
Swap: 1077501952 8540160 1068961792
MemTotal: 1031016 kB
MemFree: 13548 kB
MemShared: 0 kB
Buffers: 98064 kB
Cached: 692320 kB
SwapCached: 2244 kB
Active: 563112 kB
Inact_dirty: 309584 kB
Inact_clean: 79508 kB
Inact_target: 190440 kB
HighTotal: 130992 kB
HighFree: 1876 kB
LowTotal: 900024 kB
LowFree: 11672 kB
SwapTotal: 1052248 kB
SwapFree: 1043908 kB
Committed_AS: 332340 kB
cat /proc/cpuinfo
processor : 0
vendor_id : AuthenticAMD
cpu family : 15
model : 31
model name : AMD Athlon(tm) 64 Processor 3000+
stepping : 0
cpu MHz : 994.927
cache size : 512 KB
fpu : yes
fpu_exception : yes
cpuid level : 1
wp : yes
flags : fpu vme de pse tsc msr pae mce (snipped)
bogomips : 1956.97
TLB size : 1024 4K pages
clflush size : 64
cache_alignment : 64
address sizes : 40 bits physical, 48 bits virtual
power management: ts fid vid ttp -
MOVED: getting most ffrom my cpu and ram cinfigd in the bios
This topic has been moved to Overclockers & Modding Corner.
getting most ffrom my cpu and ram cinfigd in the biosYou can use CPU-Z to check your settings. I find it best to just use good ole bios overclocking. Set ram 1:1(FSB/Dram ratio) and FSB to 200 that that should give you 2200Mhz.
-
Kernel_task is spending too much CPU and Ram
I have Macbook Pro 13' mid 2012 I bought it 9/2013 and its started to become too slow like seriously slowed when I check the Activity Monitor kernel_task spend too much RAM and CPU and because of the usage of CPU my computer becomes overheated. This what comes up when I do the EtreCheck;
EtreCheck version: 1.9.15 (52)
Report generated 5 Sep 2014 18:00:42 GMT+3
Hardware Information: ?
MacBook Pro (13-inch, Mid 2012) (Verified)
MacBook Pro - model: MacBookPro9,2
1 2.5 GHz Intel Core i5 CPU: 2 cores
4 GB RAM
Video Information: ?
Intel HD Graphics 4000 - VRAM: (null)
Color LCD 1280 x 800
System Software: ?
OS X 10.9.4 (13E28) - Uptime: 0 days 0:36:17
Disk Information: ?
APPLE HDD HTS547550A9E384 disk0 : (500,11 GB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted>: 209,7 MB
Macintosh HD (disk0s2) / [Startup]: 499,25 GB (321,73 GB free)
Recovery HD (disk0s3) <not mounted>: 650 MB
MATSHITADVD-R UJ-8A8
USB Information: ?
Logitech USB Receiver
Apple Inc. FaceTime HD Camera (Built-in)
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Computer, Inc. IR Receiver
Apple Inc. BRCM20702 Hub
Apple Inc. Bluetooth USB Host Controller
Thunderbolt Information: ?
Apple Inc. thunderbolt_bus
Gatekeeper: ?
Anywhere
Kernel Extensions: ?
[not loaded] com.devguru.driver.SamsungACMControl (1.4.20 - SDK 10.6) Support
[not loaded] com.devguru.driver.SamsungACMData (1.4.20 - SDK 10.6) Support
[not loaded] com.devguru.driver.SamsungComposite (1.4.20 - SDK 10.6) Support
[not loaded] com.devguru.driver.SamsungMTP (1.4.20 - SDK 10.5) Support
[not loaded] com.devguru.driver.SamsungSerial (1.4.20 - SDK 10.6) Support
Startup Items: ?
FanControlDaemon: Path: /Library/StartupItems/FanControlDaemon
Launch Daemons: ?
[loaded] com.adobe.fpsaud.plist Support
[loaded] com.skype.skypeinstaller.plist Support
[loaded] com.teamviewer.Helper.plist Support
[not loaded] com.teamviewer.teamviewer_service.plist Support
Launch Agents: ?
[not loaded] com.adobe.AAM.Updater-1.0.plist Support
[not loaded] com.teamviewer.teamviewer.plist Support
[not loaded] com.teamviewer.teamviewer_desktop.plist Support
User Launch Agents: ?
[loaded] com.adobe.AAM.Updater-1.0.plist Support
[loaded] com.BlueStacks.AppPlayer.LogRotator.plist Support
[loaded] com.BlueStacks.AppPlayer.Service.plist Support
[loaded] com.BlueStacks.AppPlayer.UninstallAgent.plist Support
[loaded] com.BlueStacks.AppPlayer.UpdaterAgent.plist Support
[loaded] com.facebook.videochat.[redacted].plist Support
[loaded] com.google.keystone.agent.plist Support
User Login Items: ?
None
Internet Plug-ins: ?
DirectorShockwave: Version: 12.1.3r153 - SDK 10.6 Support
Flash Player: Version: 11.9.900.170 - SDK 10.6 Outdated! Update
FlashPlayer-10.6: Version: 11.9.900.170 - SDK 10.6 Support
JavaAppletPlugin: Version: 14.9.0 - SDK 10.7 Check version
QuickTime Plugin: Version: 7.7.3
Default Browser: Version: 537 - SDK 10.9
Safari Extensions: ?
Searchme-2
Audio Plug-ins: ?
BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
AirPlay: Version: 2.0 - SDK 10.9
AppleAVBAudio: Version: 203.2 - SDK 10.9
iSightAudio: Version: 7.7.3 - SDK 10.9
iTunes Plug-ins: ?
Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
User Internet Plug-ins ?
BlueStacks Install Detector: Version: 0.3.6 - SDK 10.7 Support
3rd Party Preference Panes: ?
Fan Control Support
Flash Player Support
Time Machine: ?
Time Machine not configured!
Top Processes by CPU: ?
22% Skype
10% WindowServer
7% coreaudiod
4% Google Chrome
3% sysmond
Top Processes by Memory: ?
181 MB Skype
84 MB Google Chrome
61 MB mds_stores
57 MB systemstats
57 MB WindowServer
Virtual Memory Information: ?
1.48 GB Free RAM
1.51 GB Active RAM
392 MB Inactive RAM
637 MB Wired RAM
561 MB Page-ins
0 B Page-outs1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off merely by the seeming complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can read it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB com.apple.AirPortBaseStationAgent 464843899 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^\([0-9]+\) /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { print "'${p[41]}'";if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$|'${p[41]}'/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { print "'${p[41]}'.plist\t'${p[42]}'";if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\\([0-9]+\\)\\(.+\\)/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1|p;b=b$1;} END { close(p) if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|(Bo|PO).+ sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' /^ +[NP].+ =/h;/^( +D.+[{]|[}])/{ g;s/.+= //p;};' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' '" L*/P*/*loginit*' 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \)' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA\(|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:| VALI|xpma' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true \) -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Co{mpon,reM},Ex,Inter,iTu*/*P,Keyb,Mail/B,Pr*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -path \\*s/Resources -prune -o -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t /S*/L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 35 49 61 51;D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D13 14 1 48 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 14 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 26 48 49 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report what happened. No harm will be done.
12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed. -
HELP: Premiere Pro CC not using all CPU and RAM during rendering and export
Hello,
I am using Premiere Pro CC on a Windows 7. My timeline is quite simple with two videos, one with the movie (mpeg) and the other with the subtitles (avi).
When I render the sequence in PP or export, the rendering time is way too slow and it only uses around 15-20% of the CPU and 3 GB of RAM.
My hardware config is :
- CPU : i7-4770k 3.50Ghz
- RAM : 8 GB
- Disk : 2 x 3 TB SATA (no raid)
RAM is not the bottleneck, neither the disk access.
I have tried rendering and exporting the same project on an iMac (with an i5 2.7 Ghz and 4 GB RAM and only 1 disk) and the result is 4x faster !!!
The CPU usage is close to 100% as well as RAM usage.
So how come PP uses all resources availble on an iMac and not on a Windows 7 ?
Is there any known bug or software bottleneck on Windows 7 ?
My machine is brand new and nothing much installed besides Adobe products.
Any help is very much appreciated.
Thanks,I just rendered out a a 2 minute sequence with about 100 clips in it and Colorista effects on everything to the Vimeo 1080 H264 preset. It took about 5 minutes to render straight from Premiere, it used all the recourses it could, my CPU was running at near %100, same with my ram and GPU, I was happy.
Then I did another render with Red Giant Denoiser and it now wants to take 30 mins and it is only using about %20 of the recourses available. My problem isn't that its taking longer with Denoiser but that its not using all of my computers CPU and GPU.
Im rendering at maximum render quality and bit dept to H264 (Im happy to wait the extra time), if I try to use VRB 2 it encodes 1 pass at a time and wants to take up to 40 minutes.
I would appreciate some advice on this.
Premiere Pro CC 2013
2.6 GHz Intel Core i7
NVIDIA GeForce GT 750M 2048 MB (CUDA GPU enabled in Premiere)
16 GB 1600 MHz DDR3
OS X 10.9.4 (13E28) -
Measuring the cpu and ram consumption of a given query in sql server
hello there how you doing and am new to this sql server forum and i suddenly popped to ask questions related to sql server
and my question goes like this
in sql server i have table called testt and it have more thna10000000 records
and i have written a query select * from testt limit 9000000; and what i want is to measure the
CPU consumption of this given query=???????????????
and
RAM consumption of this given query=???????????????
Time consumption of this given query=?????????????? this i will get it from the result bar but i don't know whether it is correct or not
any help on this it may be query, tool or configurations all are acceptable and appreciated
10Q for letting me ask questions and feeling freely.Please check these queries and this may helps you to get whats happening on with CPU currently..
SELECT getdate() as "RunTime", st.text, qp.query_plan, a.* FROM sys.dm_exec_requests a CROSS APPLY sys.dm_exec_sql_text(a.sql_handle) as st CROSS APPLY sys.dm_exec_query_plan(a.plan_handle) as qp order by CPU_time desc
Top 50 CPU usage :
SELECT TOP 50 st.text
,st.dbid
,st.objectid
,qs.total_worker_time
,qs.last_worker_time
,qp.query_plan
FROM sys.dm_exec_query_stats qs
CROSS APPLY sys.dm_exec_sql_text(qs.sql_handle) st
CROSS APPLY sys.dm_exec_query_plan(qs.plan_handle) qp
ORDER BY qs.total_worker_time DESC
SP_Whoisactive --- download from : http://www.brentozar.com/responder/log-sp_whoisactive-to-a-table/
Activity Monitor and sp_who2 active also will give some idea...
Reference links...
http://channel9.msdn.com/posts/SQL-server-High-CPU--Part-1
http://channel9.msdn.com/posts/Troubleshooting-SQL-server-High-CPU--Part-2
http://jeffstevenson.karamazovgroup.com/2008/09/identifying-high-cpu-sql-processes.html
http://searchsqlserver.techtarget.com/tutorial/Step-1-CPU-usage
================
Execute this script and and start doing your analysis in your server so that you will get more idea how its working and all the details...
Sample CPU Test : Dont try this in production and try this in your test or Dev server..
-- Query to Keep CPU Busy for 2 0 Seconds
DECLARE @T DATETIME, @F BIGINT;
SET @T = GETDATE();
WHILE DATEADD(SECOND,20,@T)>GETDATE()
SET @F=POWER(2,30);
You can easily change the parameter in the DATEADD and can make it run for 50 seconds.
-- Query to Keep CPU Busy for 50 Seconds
DECLARE @T DATETIME, @F BIGINT;
SET @T = GETDATE();
WHILE DATEADD(SECOND,50,@T)>GETDATE()
SET @F=POWER(2,30);
Raju Rasagounder MSSQL DBA -
Need advice for setup of AD and file server for small business with 2 locations
Hi,Let me begin by saying I'm not sure if this was right place to post this. I could have just as easily posted this in 4 other categories but I think we need virtualization to get the DR and HA that I'm looking for. Allow me to provide some background... Our company has two locations. For simplicity sake I'll refer to them as our Main site and Branch site.Main Site Facts:Considered corporate HQ.Has primary and secondary AD controller (two physical servers - Server 2003), as well as our ERP system (green screen), which is on a separate host. Primary AD server is also our network file server.Backups are written to tape and taken off-site. (I'd love to ditch tape if possible.)Has 22 PC's (includes 5 laptops) and about 7 networked printers.Has a 3 Mb T1 and a 50 Mb cable connection.Branch Site Facts:Has 6 PC's (includes 1 laptop) and 2...
This topic first appeared in the Spiceworks CommunityHi,Let me begin by saying I'm not sure if this was right place to post this. I could have just as easily posted this in 4 other categories but I think we need virtualization to get the DR and HA that I'm looking for. Allow me to provide some background... Our company has two locations. For simplicity sake I'll refer to them as our Main site and Branch site.Main Site Facts:Considered corporate HQ.Has primary and secondary AD controller (two physical servers - Server 2003), as well as our ERP system (green screen), which is on a separate host. Primary AD server is also our network file server.Backups are written to tape and taken off-site. (I'd love to ditch tape if possible.)Has 22 PC's (includes 5 laptops) and about 7 networked printers.Has a 3 Mb T1 and a 50 Mb cable connection.Branch Site Facts:Has 6 PC's (includes 1 laptop) and 2...
This topic first appeared in the Spiceworks Community -
Need help? My laptop overheats and shuts down when up loading
I installed Premier Elements 8 on Vista and finished my first video and when I try to upload through the share option to youtube Before 1/2 way my laptop overheats and shuts down. I have tried several times. I tried pluging laptop directly in to network so I was not uploading wireless. No luck. I also tried turning my screen down so it would make less heat. I dont know what else to try.
What is happening is that the CPU and the HDD's are being stressed more than with most other operations. This is common and can be observed in places like Speedfan and Task Manager. There are a lot of files being written to, and read from. This is especially hard, if one only has a single internal HDD, as it must do so very much, and is being asked to do it all at the same time.
In general, editing Video is about the toughest task that one can ask of a computer. The Export phase is about as tough as editing gets. If one is editing AVCHD footage, the CPU usage goes up even higher and almost exponentially!
What you observe is not a fault of the software, but just how all NLE software must work.
Unfortunately, most laptops are not properly equiped with adequate cooling to begin with. They also usually have a single HDD. That was why I went with an extreme "gaming" laptop to start, and then modified it for NLE work. It works fine, but I had to add the cooling pad, and Speedfan.
Good luck,
Hunt -
Need Advice on a Laptop Wireless Card For Arch
I have Arch running on my desktop and I'm loving it. I'm thinking about putting it on my laptop too. The problem there is that my laptop has a Broadcom wireless card that the Linux kernel doesn't recognize by default. The last time I tried to use Arch on my laptop, I had to reinstall the wireless driver every time the kernel was updated.
Is there a internal wireless mini card I can buy and put in my laptop that Arch/Linux will be able to use without compiling anything? I'll buy whatever is needed to replace my Broadcom card and make my Linux experience better if you have any recommendations.http://cgi.ebay.com/Wifi-108Mbps-super- … 27a987d09d
( Wifi 108Mbps super g Wireless PC Card CardBus Atheros
Model Number: WLG-1103)
I bought one of these about 2 months ago and it works great on my two laptops. Dirt cheap (~10 bucks, no shipping) and no fidgeting involved. Just put it in the card bus thingo, turn on the laptop, it's all good. I think the drivers are in the kernel, as I don't recall installing any driver packages on either laptop at install-time, but I definitely didn't have to do anything manually. Atheros tends to work nicely in linux in my experience, and this is no exception.
Last edited by FrozenFox (2009-10-20 20:08:48) -
Upgrading the GPU, CPU and RAM of my Laptop n201ax
This maybe is a really long post but please answer because i really need answers for each one of these questions and i really want to upgrade my laptop to the best configuration If i Can.Let me make this clear first.* In the upcoming content the words "this laptop" always refers to Hp Pavilion 15-n201ax*
Okay so first of all i read somewhere that the maximum Ram of this laptop can be expanded till 16gb but the i came up with this link here -http://h30434.www3.hp.com/t5/Hardware-Upgrades-Replacements/I-would-like-to-upgrade-memory-of-my-laptop-HP-15-n201ax/td-p/5146905 And then i came to know that it can only be upgraded to 12gb by reading Page #2 Chapter 1 Description of this Guide-http://h10032.www1.hp.com/ctg/Manual/c04438537.pdfFirst of all i would like to ask is that, 1. Can i buy a ram of any brand but ofc the same clock speed ie 1600mhz?, so can i go for the GSkill 4gb 1600Mhz DDR3 ram?2. Does the size matter to the respective slots? or i can install the 8gb and 4gb ram in any alternate slots? So this was all about the RAM But i need to know if i can change the discrete GPU and APU of this laptop3. And if Yes - Which are the compatible mobile GPU's that i can install by removing the previous one ie AMD 8600M (For example the R9, R7 and R5 Laptop graphics)4. And Which are the compatible APU's that i can install by removing the previous APU ie AMD A10-4655M APU (For example the AMD FX APU for Laptops)5. If i can upgrade the GPU and APU both please tell that does the compatibility matters? like only a specific GPU can work with a specific APU ie like in this laptop AMD A10-4655M APU + AMD 8600M GPU. Please Help Me out, Please.Thanks in advance.Huffer wrote:
Pavilion 15-n201ax? We are going to need to refer to the Service Manual here: Your Service Manual Officially, it only supports 12 gigs. Your model has a single 8 gig module so you have an open slot. Unofficially, may users here have reported that adding another 8 gigs to make a total of 16 gigs will work fine. But that is something you take the risk of doing, since it is unofficial. The part numbers for the proper memory are listed on page 42. You need DDR3L-1600 SO-DIMM. If you are going to go official, the 4 gig module is: 691740-001 This is it on amazon.com: http://www.amazon.com/HP-691740-001-1600MHz-PC3L-12800-memory/dp/B00CI08FX4/ref=sr_1_1?ie=UTF8&qid=1437948185&sr=8-1&keywords=691740-001 You should just leave the 8 gig where it is and add the new memory in the open slot. On your model laptop, the GPU/APU is soldered to the motherboard. In order to do any upgrade you would need to buy a new motherboard. You have a whole incorrect idea that the GPU/APU can be removed and replaced and this is incorrect. The term APU means a processor that has video built in so the whole question about compatibility between GPUs and APUs just misses the mark. On some systems the GPU/APU is socketed and can be replaced which serves to replace/upgrade both the processor and video function but as stated above, on yours this involves pulling and replacing the whole motherboard. There is a slightly better processor/graphics available using the AMD A10-5745M 8670M (2.9 GHz/2.1 GHz, 2 GB L2, 1333MHz DDR3L Quad 25W) for use with Windows Standard. The motherboard part is 734824-501 HP does not stock the board but I found this online: http://www.discounteddealz.com/product.asp?itemid=327740&gclid=CO78y6rn-cYCFQmCaQodOP0GLQ Never heard of this seller and can't vouch but the price is very reasonable for that board. I expected it to be quite a bit more which makes me wonder about this seller a bit. I would advise keeping what you have. It is very strong for AMD and upgrading to the A10-5745 board will only result in a very small uptick in performance at a very high cost in money and effort. If this is "the Answer" please click "Accept as Solution" to help others find it. Hey sorry but i should have mentioned this before, I live in India and the links you provided are for amazon.comi tried to search on amazon.in and eneded up with this http://www.amazon.in/s/ref=nb_sb_noss?url=search-alias%3Daps&field-keywords=HP+691740-001+4GB%2C+1600MHz%2C+PC3L-12800+DDR3L+DIMM&rh=i%3Aaps%2Ck%3AHP+691740-001+4GB\c+1600MHz\c+PC3L-12800+DDR3L+DIMM Instead, can i get this one ? beacuse the hp one on the above result costs 41% more than the Transcend one below and that's very much http://www.amazon.in/Transcend-4GB-DDR3L-1600-LAPTOP/dp/B00B5LOOJG/ref=sr_1_2?s=computers&ie=UTF8&qid=1437984575&sr=1-2&keywords=ddr3l+4gb+1600mhz And last thing is that Will the performance be better if i go for Ram branks like Corsair or GSkill same types of memory? -
I've been through hundreds of posts in the last year. back then all of a bloody sudden firefox starts eating my computer. 500+mb of use ram during normal browsing.
Decent cpu use at around 25% but if i turn on youtube it hits 80% for about 6 mins then it's 97% to 100% and it's always in constant motion between those 4 values.
playing any game which uses flash or java quickly become unplayable and I've seen it hit 1gb+ ram use.
turning off flash protected fixed youtube but it's unsafe so need a different fix. and I'm out of ideas for everything else. I.E same problem, chrome is even worse than FF, and opera won't even run. so what do i do now1. it's wrong I have the current version 12. something.
2. just firefox not even counting the plug-in container.
3. the laptop is old almost 4 years, 1.93 GB of ram, only antivirus begins at start up, linux is something I'd rather not mess with a couple stupid people use my computer, and i have an intel celeron 900 2.20 GHz single core.
you sounded condescending careful it's far more telling than you realize. -
Finder CPU and RAM high, unresponsive, icon fail to load
Hey guys,
I am trying to figure out a solution here, also, if this is my computer specifically causing this.
I have a mid 2012 MBP, I7 2.9ghz, 750gb HDD, 8gb ram, Mavericks.
I have about 1 million files on my hard drive, and it seems my computer has issues with this. When I open finder and "All my files" loads up, my finder CPU percent shoots up to 200 to even 360%. The ram usage for finder shoots up a few GB's and even closing finder, it keeps that usage. It does not make sense to me the memory usage stays used because if I go from All my files to Documents, then back to All my files, it takes awhile to reload those files. Not sure what is being stored in RAM if it is reloading every time and uses more and more ram.
Anyways, This gives me huge unreponsiveness. One consequence is if I write click a file and choose open with, the icons sometimes do not load. If I click elsewhere and choose open with again, the icons are loaded. If I go to Applications, I can painfully see all the icons slowly load.
I have tried everything I have been able to. All the resets, deleting caches and plist. Reinstalling OSX. Going as far as reformatting. I have to do a fresh format because if I reload my backup files the number of files jumps up. Over time, the number of files I have reach my normal amounts and I get these performance issues. I have been on the phone with apple in total of over 30 hours. I have reinstalled OSX more than 7 times, formatted more than 3 times, been to a genius bar about 7 times.
Apple first thought it was due to programs, but through testing (creating files on a fresh install) showed my performance issues were not related to a third party app. This made them replace my hard drive, but I get the same issues with the new hard drive.
I found a compounded issue with time machine, if I had local backups on it essentially doubled the amount of files I had on my drive and made things worse. I turned local backups off via command line. This helped a lot, but still not fully there.
I can turn spotlight off on some of the bigger folders with files, but when I get down to if I would have to turn spotlight off completely for my whole computer to hit every file. This means I cannot search for things on my computer which is a no no.
Why do I have that many files? Well, that is not THAT many. But it adds up quick. I do some development work on websites, I do coding for apps. This all adds up files quickly. School work, movies, music, documents, saved web sites, applications, frameworks, it all adds up.
Once funny thing is, if I run Parrallels with windows 8, my performance is usually better within windows 8 than it is in OSX.
Any suggestions, recommendations? Turning off spotlight is a partial solution but not a viable one. The engineers at apple recommended turning off backups and spotlight on the folders with lots of files, but this means essentially not using a backup or spotlight at all. I cannot turn backups off of my app work, that would be crazily stupid to do. I also don't want to turn spotlight off of everything as that would make finding files that I forget where they are hard to find.
Last thing, my computer runs decently well. Once it starts and is ready it is pretty much good to go. Once I do something file related though, such as open finder, even once it is closed my performance drops until I shut down the computer. Even if activity monitor shows I am 95% idle, I get the spinning beach ball and slowness.
Any help is appreciated.
Here is my etrecheck
Hardware Information:
MacBook Pro (13-inch, Mid 2012)
MacBook Pro - model: MacBookPro9,2
1 2.9 GHz Intel Core i7 CPU: 2 cores
8 GB RAM
Video Information:
Intel HD Graphics 4000 - VRAM: 1024 MB
System Software:
OS X 10.9.1 (13B42) - Uptime: 0 days 1:46:8
Disk Information:
APPLE HDD HTS541075A9E662 disk0 : (750.16 GB)
EFI (disk0s1) <not mounted>: 209.7 MB
Macintosh HD (disk0s2) /: 749.3 GB (643.23 GB free)
Recovery HD (disk0s3) <not mounted>: 650 MB
MATSHITADVD-R UJ-8A8
USB Information:
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Computer, Inc. IR Receiver
Apple Inc. BRCM20702 Hub
Apple Inc. Bluetooth USB Host Controller
Logitech USB Receiver
Apple Inc. FaceTime HD Camera (Built-in)
FireWire Information:
Thunderbolt Information:
Apple Inc. thunderbolt_bus
Kernel Extensions:
com.globaldelight.driver.BoomDevice (1.1 - SDK 10.9)
com.bresink.driver.BRESINKx86Monitoring (9.0)
Problem System Launch Daemons:
Problem System Launch Agents:
Launch Daemons:
[System] com.microsoft.office.licensing.helper.plist 3rd-Party support link
Launch Agents:
User Launch Agents:
[not loaded] com.google.keystone.agent.plist 3rd-Party support link
[not loaded] com.valvesoftware.steamclean.plist 3rd-Party support link
User Login Items:
Boom
Flux
iTunesHelper
Internet Plug-ins:
SharePointBrowserPlugin: Version: 14.0.0 3rd-Party support link
QuickTime Plugin: Version: 7.7.3
Audio Plug-ins:
BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
AirPlay: Version: 1.9 - SDK 10.9
AppleAVBAudio: Version: 2.0.0 - SDK 10.9
iSightAudio: Version: 7.7.3 - SDK 10.9
3rd Party Preference Panes:
None
Bad Fonts:
None
Old Applications:
None
Time Machine:
Mobile backups: OFF
Auto backup: YES
Volumes being backed up:
Macintosh HD: Disk size: 697.84 GB Disk used: 98.78 GB
Destinations:
RomesMacBckUp [Local] (Last used)
Total size: 2
Total number of backups: 20
Oldest backup: 2013-07-08 19:48:47 +0000
Last backup: 2014-02-06 04:20:20 +0000
Size of backup disk: Adequate
Backup size 2 > (Disk used 98.78 GB X 3)
Time Machine details may not be accurate.
All volumes being backed up may not be listed.
Top Processes by CPU:
3% WindowServer
1% EtreCheck
1% TemperaturMonitorLite
0% Flux
0% mds
Top Processes by Memory:
3.35 GB Finder
131 MB com.apple.IconServicesAgent
90 MB mds_stores
74 MB WindowServer
66 MB com.apple.WebKit.WebContent
Virtual Memory Information:
1.08 GB Free RAM
3.72 GB Active RAM
2.44 GB Inactive RAM
771 MB Wired RAM
1.36 GB Page-ins
0 B Page-outsThank you for your reply, but I would like to reiterate I have already reinstalled and even formatted numerous times.
Force quit does not help.
Maybe you are looking for
-
IMAC takes forever to open any file
This just started, the rainbow wheel spins forever while trying to open a file to include internet and email. Seems like it is checking something in the background, but I have no idea what. Any suggestions will be greatly appreciated.
-
My ipod has not been able to back up for a while now. When I plug it in it syncs then it gives me a back up error message -20. If anyone knows how to fix this problem i would appreciate it.
-
how can I download my video from the iphone to my computer?
-
Creating and organizing one large document from many small "forms"
I'm organizing a symposium and attendees submit abstracts. I have set up a "form" using Word to distribute to people to fill out and named all the fields, example: "Title," "Firstauthor," "Body." Etc. They are going to email me completed forms. I was
-
DRM 11.1.13 - ORA-01536 space quota exceeded for tablespace "DRM_INDEX"
Hello, Are there any guidelines or recommendations on how to size the index tablespace of the DRM repository? We keep running out of space, it is now set to 10GB. We have hierarchies with 100,000+ nodes in about 6 versions, several exports with queri