Need advice on the best setup of a TC and 2-wire wireless gateway to a 2011 iMac.

I upgraded to the Gateway so I could wirelessly stream HD movies to my TVs. Current setup: Ethernet cable from the wireless Gateway to the TC and Ethernet cable from the TC to the iMac; wireless turned off on the iMac and the TC is in bridge mode. I would think a more direct route from the gateway to the iMac using the Ethernet WAN connections on the gateway and iMac would be preferred. I want to use the TC solely for a backup. Can the USB ports on the TC and iMac be used for connection the two? (available connectors on the TC- 1 Internet WAN port, 3 Ethernet ports, 1 USB. The iMac has only 1 internet WAN port with multiple USB ports, 1 firewire port). THANKS

I would think a more direct route from the gateway to the iMac using the Ethernet WAN connections on the gateway and iMac would be preferred
You already have the best connection path. There is no WAN port when the TC is in bridge mode. All ports behave the same....as LAN ports when in bridge mode. Connect to any port you wish.
Another way of saying the same thing.....the ports behave as a simple Ethernet switch when the TC...or any other router...is configured in bridge mode.
Another thing that you might not have thought about.....the ports on the gateway are only 100 Mbps ports. So, if you connect from the gateway to the TC, the maximum speed will be 100 Mbps.
The ports on your TC and iMac are 1,000 Mbps ports.....Gigabit Ethernet. You will have a much, much faster connection and much much faster backups with the iMac connected to the TC.
Can the USB ports on the TC and iMac be used for connection the two?
No

Similar Messages

I need advice (for the best way to exporting uncompressed files)

Using Final Cut Pro to animation(2D) project(30fps), I've experienced a problem exporting uncompressed TGA image sequence files.
Here's the workflow I use:
File> Export> QT Conversion> Image Sequence> Options> TGA, uncompressed 8bit, millions of color, 30 fps> OK
After exporting a files, I supposed to get 1MB each(file size), but I got less than 1MB each(file size). It tells us that those are compressed files. The size of files is random. when I use Avid Nitris there is no problem but it is different with the Final Cut Pro.
Do you know what is the best way to exporting uncompressed TGA image sequence files out of FCP? (for Best Quality Output)
Thank you in advance.
Jasmine

Patrick,
I'm sorry it has taken me so long to reply you. I can't post your request, because Avid is not here. So I will post another example, and I have another question. This is the nearset approach to problem. See below images.
I use QuickTime 7.1 and Final Cut Pro 5.1.1 in the PowerMac G5 2.0 Ghz.
1. File > Export > QT Converstion > Image Sequence > Options > TGA, 30, Best Depth
I supposed to get 1MB each, but I got less than 1MB each. It tells us that those are compressed files, and shows up low quality images. (besides, The size of files is random.)
2. File > Export > QT Converstion > Image Sequence > Options > TIFF, 30, Best Depth (Compression: None)
Finally, I was a great success See the files size: all 1MB each. I can get the result that I want/___sbsstatic___/migration-images/migration-img-not-avail.png
OK, now question, I will tell you.
Why have a different result? (TGA vs TIFF)
'TIFF options' have a compression option, but 'TGA options' haven't it. So 'TGA image sequence' can't make uncompressed files. For what reason? Do you know any particular reason?
: TGA Options haven't compression option.
: TIFF Options have a compression option.
What's the 'Little Endian'? I don't know this option: Little Endian.
Could you explain that for me, please? Lay it all out for me, please..
Thank you for your kindness,
Jasmine

I need advice on the best way to learn Dreamweaver

I have designed a website in Adobe Illustrator and I now want to build it using Dreamweaver. I have never used Dreamweaver before. Can anyone recommend useful books or tutorials. I would also consider doing a short course - I live in London, UK.

Hi there -
First I want to congratulate you on recognizing that a design is not a website. You would be amazed how many people think their design is a functioning website..
Your task is not to learn Dreamweaver, but rather to learn how web pages work.
That means familiarity with HTML and CSS and the functions of JavaScript and PHP, not so much how to code,
but how they work.(you can look up particular functionality IF you have a good overview of the function).
Dreamweaver is just a tool, it's like if you wanted to build a home, you'd better understand the structure of a house before focusing on how to use a hammer or saw.
Here's a nice tutorial
http://www.thesitewizard.com/dreamweaver/dreamweaver-cs6-tutorial-1.shtml
Using the SSI extension in Dreamweaver to create page headers | Adobe Developer Connection
Feel free to post a picture of your design her for our suggestions about page structures to best translate it into a web page.
I'd also suggest you check out SSI (server side includes) to save you a lot of repetitive coding and errors.
http://www.tizag.com/phpT/include.php
Others will come along with other resources for you. Hope to see you again as you progress.

Can you use Apple TV 1 and Tv 2 together And what is the best setup

Hey guys
Can you use Apple TV 1 and Tv 2 together?
And if you can what is the best setup with teh two devices above and the need to hook it to one TV.
Thanks in advance.
-David

Welcome to the Apple Community.
If I understand correctly you want to use both the Apple TV's with one TV.
There wouldn't be a problem with that, they will each need there own network connection and should be connected to different AV inputs on the TV so that you can switch between each Apple TV as a source with your TV remote.
If you don't have two HDMI ports on the TV, the Apple TV 1 will connect by component cables, if this isn't possible you would need to get yourself an HDMI switch.

I have a MacBook Pro 5,4 running OSX 10.6.8 and Safari 5.1.10. A website i like has a known bug with 5.1.10 and recommends I install a newer version of Safari or use Firefox or Chrome. Just looking for advice on the best approach. Thanks!

I have a MacBook Pro 5,4 running OSX 10.6.8 and Safari 5.1.10. A website i like has a known bug with 5.1.10 and recommends I install a newer version of Safari or use Firefox or Chrome. Just looking for advice on the best approach. Thanks!

Unfortunately, Safari cannot be updated past 5.1.10 on a Mac running v10.6.8.
So, the options are to upgrade to a newer OS X or use Firefox or Chrome.
Be aware, Apple no longer support Snow Leopard v10.6 > www.ibtimes.com/apple-kills-snow-leopard-os-x-106-no-longer-receives-security-u pdates-1558393
See if your Mac can run v10.9 Mavericks > OS X Mavericks: System Requirements
If so, you can download and install Mavericks for free from the App Store.
Read prior to upgrading > Upgrading to 10.7 and above, don't forget Rosetta! | Apple Support Communities

I have brought a 17'' MacBook Pro 2.5ghz core 2 duo 2gb. Model A1261. It seems I can upgrade to either 8gb or 16gb ram! But since It's 2006'ish, I just want some advice on the best ram that would work for a good price. Thanks :)

I have brought a 17'' MacBook Pro 2.5ghz core 2 duo 2gb. Model A1261. It seems I can upgrade to either 8gb or 16gb ram! But since It's 2006'ish, I just want some advice on the best ram that would work for a good price. Thanks :)

Keiran420 wrote:
8 gb will do I guess
Based on the information that you have supplied, you have a Early or Late 2008 MBP. Maximum RAM that it will accept is 6 GB with the following specifications: 200-pin PC2-5300 (667MHz) DDR2 SO-DIMM.
The best sources for Mac compatible RAM are OWC and Crucial.
Ciao.

Please give me advice about....what is the best virus guard in store and is virus worked in iPhone (my English is not good sorry)

Please give me advice about....what is the best virus guard in store and is virus worked in iPhone (my English is not good sorry)

If you are gettin spammed via e-mail or text that your IOS has a virus (usually says call some 800 number) then these are a scam - do NOT contact these crooks

Need help finding the best Mac for gf

hi I need help finding the best desktop. I am looking to buy MAC for gf.
she uses final cut program question is does the GB/RAM/STORAGE matter on performance?
She has a 2009 Apple computer I want to upgrade her to a new one
I Dont know much when it comes to specs. She edits tons of videos and pictures.
what's recommended for a video/photo editor that's good in performance ?

Pro consumer might go with iMac even.
Final Cut Pro latest benefits from dual AMD graphics.
Video is one animal, graphics a much different.
Great site full of performance, buying and configuration ideas:
MacPerformance Go to the main topics
I think you need to get clear on budgets. start with mid range and add all the options and can spend $4,000 or $7,000.
Go to the Mac Store and do some looking and Google for reviews of software, hardware of course.
Barefeats
Rumors Pro
Visit the forum for FCP-X would be a place to start.
Final Cut Pro X

How can I control the image size when I export form iphoto, the choice is too limited, I need to send a photo under 3 MB but if I choose high quaulity it is only 1.1 and i need to keep the best quaulity I can. Thanks for help.

How can I control the image size when I export form iphoto, the choice is too limited, I need to send a photo under 3 MB but if I choose high quaulity it is only 1.1 and i need to keep the best quaulity I can. Thanks for help.

Any image can only be as large as the Original. With a program like Photoshop you can UpRes an image and get it to a bigger size, larger files size as well, but the actual quality of the image will be degraded, depending on the UpRes system and the original quality of the image.
iPhoto is not the program to be doing that in and I don't think it even has that option.
So I suspect the image you are trying to send isn't much bigger than what you are getting. You can also try Exporting it from iPhoto to yopur desktop and see what size you end up with. If it is still that 209KB +/- file size then that is the size of the original image.

What is the best setup to encode h264 (1080p) and to avoid stuttering, dropped frames?

Hello,
What is the best setup with AME to encode h264 (1080p) and to avoid stuttering, dropped frames using a classic video player .I am looking to have the smoothest experience (in fast horizontal motion for ex!).It also can be another format (intra codec’s etc...)it doesn’t matter as long as readable by most players. Anyone’s to tell his favorites presets for that?
thanks

I should have included the following:
1.) Why can't I make a silent project in GarageBand? I have to instead find a project with a long enough song, make an "iLife preview" of it (see (2) below), copy it from the iMovie Music and Sound Effects browser to the end of the movie, and then open the audio panel and turn the volume to zero. And all this so that video websites don't get confused by a soundtrack that starts in mid-movie.
2.) Why do I have to "render" them by the following process: Double-click a song in the iMovie Music and Sound Effects browser. You get a dialog box saying "The project "The Great Race" cannot be used because it was not prepared with an iLife preview. Would you like to open "The Great Race" in GB so you can save it with an iLife preview?" What I don't understand is why this new thing was introduced and why I have to do it via iMovie.

Just bought a 3TB Time Capsule for a small office. Will have 4 users with MacBooks. What would ne the best setup for time machine individual backups and internet sharing in a secure way?

Just bought a 3TB Time Capsule for a small office. Will have 4 users with MacBooks. What would ne the best setup for time machine individual backups and internet sharing in a secure way?

Set up each Mac for Time Machine backups in the normal way. Time Machine will keep each backup separate on the Time Capsule, so users will only be able to see the backups of their own Mac.
Yes....there are convoluted workarounds that might allow one user to see the backups of another.....IF...they know the administrator password of the "other" Mac.
As far as Internet sharing, all users will have access to the Internet if they have a wired or wireless connection. If a Mac connects using wireless, it is possible to limit the time that they are allowed to connect to the network.
For example, you might limit the ability to connect to the wireless from say each Weekday from 8 AM to 6 PM.
With a wired Ethernet connection, you cannot limit access times to the Internet.

What is the Best case for iPad 2 and something to protect the back

Hi there I am wanting to protect my dear iPad 2 lol. So I would like some advice on the best cases please,I would to protect the back of it too,I see the smart case is ok but no cover for the back,there are loads on eBay but are they just cheap plastic, any names and place to buy is a great help thank you

Hello tori77,
the Best will be what suits your needs.
I use OtterBox Defender Series for my iDevices.
http://www.otterbox.com/iPad-2-Defender-Series-Case/APL2-IPAD2-D9-E4OTR_A,defaul t,pd.html
IMHO you should also have a good screen protector.
Here is a choice:
http://store.moshimonde.com/ivisorag-for-ipad2-black.html?gclid=CPvLnf2J2qoCFYXt 7QodbGtD6Q
No bubbles, removable, washable, reusable.
The above are also carried by BestBuy.
Happy Computing,
A

I'm using Aperture for photos on my Mac, I have near 450G of raw photos and I'm running short on space,what is the best option to imrpove proformance and increase space.?

I use Aperture on my Mac and have approx 450Gigs of raw files for my photos and growing. I'm running short on space and system is starting to slow down. What are the best ooptions to improve performance and increase space space.?

important to note that what you are talking about is not a backup
It is simple to ahve your iPhoto library on an external drive -
Moving the iPhoto library is safe and simple - quit iPhoto and drag the iPhoto library intact as a single entity to the external drive - depress the option key and launch iPhoto using the "select library" option to point to the new location on the external drive - fully test it and then trash the old library on the internal drive (test one more time prior to emptying the trash)
And be sure that the External drive is formatted Mac OS extended (journaled) (iPhoto does not work with drives with other formats) and that it is always available prior to launching iPhoto
And backup soon and often - having your iPhoto library on an external drive is not a backup and if you are using Time Machine you need to check and be sure that TM is backing up your external drive
And you can have multiple i{Photo libraries - one can be on your internal drive and other on an external drive -- iPhoto Library Manager - http://www.fatcatsoftware.com/iplm/ - is a very helpful tool for managing multiple libraries
LN

With supervised ipads, what is the best way to transfer photos and videos from the ipad to the PC? Wireless transfer is not an option in our circumstances

With supervised ipads, what is the best way to transfer photos and videos to the PC? Wireless transfer is not an option in our circumstances.

There are only two ways of transfering things on the iPad.
- via WiFi
- via usb cable
From what I have read, you need to connect to iTunes on the supervising PC.
Robert

TS3711 I have changed the keyboard on my iBook G4 (OS 10.5) to a Japanese JIS Keyboard but cannot get the Keyboard Setup Assisstant to run and recognise it.

I have changed the keyboard on my iBook G4 (OS 10.5) to a Japanese JIS Keyboard but cannot get the Keyboard Setup Assistant to run and recognise it. Some symbols don't match. What can I do to get the new keyboard recognised/installed? The keyboard setup assitant looks as if it will open when clicked on but does not.

You may need to reset the pmu. See this article:
http://m10lmac.blogspot.com/2009/12/fixing-keyboard-type-problems.html

Need advice on the best setup of a TC and 2-wire wireless gateway to a 2011 iMac.

Similar Messages

Maybe you are looking for