Need advise for a good book

I'm a beginner and I'm looking to buy a good book to learn
how to use dreamweaver, I went to amazon and most of the books
about dreamweaver have good rating so it is hard to know which one
is the best for me.
What do you suggest?
Thank you for your help.

> I just bought the
> missing manual and it seem very good!
I'm especially fond of the TechEditor.
Good luck!
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"Yannorlando" <[email protected]> wrote in
message
news:fvv63f$d78$[email protected]..
> Don't worry I know several web developer, they will help
me. I just bought
> the
> missing manual and it seem very good! Thanks for your
help
>
>
quote:
Originally posted by:
Newsgroup User
> Are they OK with a site that looks and performs as if it
were the first
> site
> someone has built? I hope not....
>
> --
> Murray --- ICQ 71997575
> Adobe Community Expert
> (If you *MUST* email me, don't LAUGH when you do so!)
> ==================
>
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
>
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
> ==================
>
>
> "Yannorlando" <[email protected]> wrote
in message
> news:fvt4tm$6o1$[email protected]..
> > yes I'm starting learning HTML, for me advanced
mean a website for a
> > construction company with link picture etc.
> >
> > Thank you for your help
>
>
>
>
>

Similar Messages

Looking for a good book about threads

Hello all,
I am looking for a good book about threads.
I would like something which is both practical, but also provides some theoretical basis.
I am an experienced programmer, with some, but not much, experience with concurrent design.
I would greatly appreciate any suggestions.

I found the "Java Threads" book by Oaks and Wong to be fantastic:
http://www.oreilly.com/catalog/jthreads2/
- K
Hello all,
I am looking for a good book about threads.
I would like something which is both practical, but
also provides some theoretical basis.
I am an experienced programmer, with some, but not
much, experience with concurrent design.
I would greatly appreciate any suggestions.

Need advise for purchase

hello, I would like to develop flex 4.5 applications in mobile devices... can you advise me for a good phone with android OS?
I'm looking for something around $400 US dollars
thanks in advance
JedM

I was actually just about the put the Droid 2 I got at Adobe Max on craigslist. :D
It's a beautiful device, but I need the cash for some unfortunate expenses that popped up. I'd be happy to cut ya' a deal, being a fellow dev and all.
PM for details.
PS: This offer goes out to anyone else looking for a good testing device, if the OP isn't interested
*edit*
Looks like my offer is available to anyone who is interested.
Hehe, I feel like such a spammer!

Suggestion for a good book for webdynpro for java

Hi, I am new to this technology,and i know a little bit basics,but i want to learn in depth regarding Webdynpro For Java and my backend is SAP R/3
can anyone suggest me a good book for webdynpro for java

Hi padma,
Check this link.
<a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/webdynpro?rid=/library/uuid/49f2ea90-0201-0010-ce8e-de18b94aee2d#9">Web Dynpro Sample Applications and Tutorials</a>
Re: Guides for new entrant to Webdynpro
Regards,
Mithu

Suggestion for a Good Book

Hi,
Could someone suggest me a good book covering core java security (not J2EE)?. I'm looking for a book that covers all security related APIs that are part of Java 2 SDK 1.3.x + JSSE + JCE + JAAS or Java 2 SDK 1.4.x.
Any help would be highly appreciated.
Thanks.

I've a book called "Professional Java Security",
by Jess Garms and Daneil Somerfield, published by Wrox press.
I've used it to dip my toes into the Java Cryptography extension, and
it was very good. I got a TripleDES encryption utility working reasonably easy.
Also covers JCA, JCE, JAAS, JSSE, SSL and E-Commerce.
regards,
Owen

GW 6.5 - A suggestion for a good book

Hello people !
I'm CNE in Brazil and I would like to know a good book to implement GroupWise 6.5.1 im my server that it will work with Border Manager 6.5 SP3 (Small Business Suite Starter Pack).
Thanks in advance.

These fourms are focused on developer issues, you will find that Novell has a
different set of forums for general support, which have a lot more people answering
questions.
Say that take a look at Novell's own book
http://www.novell.com/training/books...=bookAdm&val=3
Roger Thomas, Dev SysOp 22
<[email protected]> wrote in message news:Ovy4e.3095$[email protected]..
Hello people !
I'm CNE in Brazil and I would like to know a good book to implement GroupWise 6.5.1 im my server that it will work with Border Manager 6.5 SP3 (Small Business Suite Starter Pack).
Thanks in advance.

Searching for a good book about [Arch Linux]

Hello friends,
I'm here stuck with Windows 8, making a couple of tests about installing Arch Linux in VMware Workstation, if it succeeds, I'll move to Arch completely. My question is: Is there a good book about Arch (installation, maintenance, best practices, security, and so on)? I tried "Arch Linux Environment set-up How-To", but unfortunately, it wasn't what I expected.
I'm a little confused about UEFI + GRUB2 + GPT/MBR but I think I'll dominate it soon...
My system:
[PROCESSOR] >> Intel® Core™ i7-3840QM (8M Cache, up to 3.80 GHz)
[GRAPHICS] >> Dual Nvidia GeForce GTX 680M GPU With 4GB GDDR5 Video Memory (SLi)
[RAM] >> 16GB DDR3 SDRAM 1600MHz
[SSD] >> OCZ Vertex 4 (256GB)
[HDD] >> Seagate Momentus XT Hybrid (750GB)
I wonder in how many seconds the system will boot up...

@op As others have mentioned, do not seek out knowledge from a book. There has been quite a few shifts in Archlinux, specifically to uefi and systemd. There are a few starters for your concern.
https://wiki.archlinux.org/index.php/Un … _Interface
https://wiki.archlinux.org/index.php/UEFI_Bootloaders
https://wiki.archlinux.org/index.php/Beginners'_Guide/Installation
Other then that, there is the forums and a quick search will land you on a goldmine of knowledge. Great idea to start it up in a vmware, although it will not require the uefi boot, but it will still get you a bit more familiar with the install process and iron out some basic questions. Good luck!

Font Book in 10.7 is retarded. I need recommendations for a good font manager for OSX

On our 10.5.8 G5, I'm using Extensis Suitcase.
Our new Mac Pro is running 10.7 and I need to install fonts, but Font Book seems to cry about just about every font I want to install. So, where are the best font managers for OSX as of right now? Is Extensis still the best? Thoughts? Thanks,
Chris

I know what your're talking about. I used to do phone support for an ISP.
Anyway, this last one that has me up in arms says this:
"1 serious error was found. Do not use this font."
This is in the Font Validation window when I try to install into Font Book. It shows the font name "Serpentine-Bold-Bold.ttf" in the window with an expand triangle to the left. To the far right is a red circle with a white X in it. Ahh screw it, here's a screenshot....
This font works perfectly fine on our G5 running 10.5.8

Re need advise for groups

Hi guys.
Doing a reinstall of Arch 32 bit and had some problems with gnome before where it was not rendering themes properly for my user and looked ugly lol.
Anyways I would like some advise on what groups I need and should add for my user account. This is a one user machine.

the groups you add for your user is very dependent on what you're running on your system. It's hard to say exactly which ones you'll want without knowing what you want to do on your system. The wiki page has some good info on various groups and what they do, it should help you better figure out what you want. http://wiki.archlinux.org/index.php/Groups

Looking for a good book or Cisco page

Hi, I'm looking for info on how to deploy redundant LNS's for VPDN access. Does anyone know of any Cisco Press book, or Cisco page on their website that is really good for info about this?
I've searched on the Cisco site and haven't found much.
Thanks!
LisaG

Hi Lisa,
See if this link helps you
http://www.cisco.yar.ru/literature/Access_VPDN_Solutions_Guide.pdf
HTH
Ankur
*Pls rate all helpfull post

Looking For A Good Book Or Manual for Photoshop Elements 3.0

Photoshop Elements 3.0 is my very first photo editing program and am looking for a book that will show me how to use all of the features. Comments on the following 3 books would be greatly appreciated.
Adobe Photoshop Elements 3.0 Classroom in a Book
The Photoshop Elements 3 Book for Digital Photographers
Photoshop elements 3: The Missing Manual

I have PE3 so would be glad to pay the shipping if they are of no use to you anymore. Would both PE2 and 3 be necessary or would PE3 be good enough? Should I contact you by email?
Ken and Colin, your comments are a great help too. Thanks for the responds. I'll look online for The Photoshop Elements 3 Book for Digital Photographers. Wasn't thinking...the only ones at the stores are the more current versions.

Need advise for processing DAQmx waveform array

Hello All,
I am using following code to continuously acquire data from 2 channels, then export to a text file for analysis with Execel or Origin. The data file should contain four columns:
t1 Y1 t2 Y2
I know it is convenient to use Write Measurement File express VI, but since this express VI open and close file in each loop execution, I prefer to use low-level File I/O functions to save computer resources (I need to reserve resources for image acquisition and analyses).
The following attached VI just show the overall frame of the code, but is not executable now. I hope to get some suggestions from this forum to finish it.
Here, I have two main questions, thank you in advance if you can provide hints to any of them.
(1) How to get correct t0 and dt values for the waveform data
I am using 25Hz pulse signal to externally trigger DAQmx through PFI0. I set 100Hz for the rate input of the DAQmx timing VI since LabVIEW help says "If you use an external source for the Sample Clock, set this input to the
maximum expected rate of that clock. " .
When I use Write Measurement File express VI, I found in the resulting text file, the dt is 0.01 instead of 0.04, i.e., the value of dt in the waveform data is not determined by external PFI0 signal, but by the rate input for the DAQmx timing VI. Also, I found t0 does not always start from zero. However, from the display of data plot, I am sure the acquisition is at 25Hz.
Some people in this forum ever told me to use Get Waveform Component and Build waveform functions to manually rebuild the waveform data in order to get correct t0 and dt. I tried and no luck to succeed. Anyone can give me more detailed hints?
(2) How to write data of 'NChan NSample' at one time in a loop
I have two channel DAQmx, and for each channel there are several data points. I plan to use following method to export data:
Suppose in one loop DAQmx Read VI read 10 samples from each channel, so I assume I will get four arrays of 10 elements:
t_channel_1, Y_channel_1, t_channel_2, Y_channel_2.
Then I use a loop structure of N=10 to concatenate t1, tab,Y1,tab, t2,tab, Y2,return in 'element by element' mode, i.e., do 10 times of string concatenate and write to text file.
I don't know whether above method is effective. Anyone can advise a better one?
(3) Convert from timestamp to elapsed time in milisecond
In the final text file, the time column should be the values of elapsed time in milisecond since the start of acquisition. So, I think I need to get the timestamp of the first data point so that for later data points I can use Elapsed Time express VI to extract elapsed time in milisecond. However, I don't know how to get the timestamp at the starting of acquisition. Please advise if you know it.
Sincerely,
Dejun
Message Edited by Dejun on 08-30-2007 10:34 AM
Attachments:
code.jpg ‏86 KB
code.vi ‏49 KB

tbob wrote:
Ravens Fan:
Read his post again:
"I am using 25Hz pulse signal to externally trigger DAQmx through PFI0. I set 100Hz for the rate input of the DAQmx timing VI since LabVIEW help says "If you use an external source for the Sample Clock, set this input to the maximum expected rate of that clock. " .
When I use Write Measurement File express VI, I found in the resulting text file, the dt is 0.01 instead of 0.04, i.e., the value of dt in the waveform data is not determined by external PFI0 signal, but by the rate input for the DAQmx timing VI. Also, I found t0 does not always start from zero. However, from the display of data plot, I am sure the acquisition is at 25Hz."
He says in the 1st paragraph that he sets theDAQmx timing to 100Hz because that is his maximum expected clock rate. In the 2nd paragraph he says that in his measurement file dt is 0.01 instead of 0.04. This indicates that the dt value is determined by the DAQmx timing rate, not the PFI0 clock rate. I am thinking that he should set the DAQmx timing to match the PFI0 timing, 25Hz.
Maybe this would work.
You're right, I did misread what he said. But, I still have questions about what he said. " I set 100Hz for the rate input of the DAQmx timing VI ". The code shows a rate input of 25 to the timing VI. And nowhere else do I see a setting of 100Hz. I ran his code (used a simulated device) and put an indicator on the to dt's in the clusters. The came up as .04 which is what i would expect. It is hard to comment what is going on in the file since there is nothing being send to the write text file VI.
Message Edited by Ravens Fan on 08-31-2007 12:18 PM

For a good book regarding the network security and management

i am not a newbie to networking. i have done ccna successfully. now i want to do gain some knowledge regarding the security of the networks.
i want to know which book i prefer?? or any other good advice..
Regards

You don't get books dealing with ASP and MySQL but you can get books that deals with PHP and MySQL. For example I have used this book (click on it to go to Amazon):
There are other books as well but this one gets you started quickly and then you can develop your skills buying something more advanced.
Good luck.

Need suggestion for a good scanner/inkjet photo printer

I would like to be able to scan in photos to edit and also print photos.
Most of all, I want the ability to print two-sided (manual or automatic).
Of course, I'd also like it to print decent photos as well.
Any suggestions? (It seems the Mac software for certain printers isn't as good as the Windows version of the printer software)

Epson, Canon, Kodak are all good printers. they all have their own good software that will satisfy most requirements.
I did not mention HP because of their inadequate support and the unbelievable number of printer types (models) they have on the market that are not supported.
Your biggest problems are going to be:
1 Compatibility with Leopard.
2. Meaningful support from vendor.
3. Cost of Ink refills.
All three items above, especially Items 2 and 3 made me lean toward Kodak.
look at them
Norm

Need advise for best practice when using Toplink with external transaction

Hello;
Our project is trying to switch from Toplink control transaction to using External transaction so we can make database operation and JMS operation within a single transaction.
Some of our team try out the Toplink support for external transaction and come up with the following initial recommendation.
Since we are not familar with using external transaction, I would like member of this forum and experts, to help comment on whether these recommendation are indeed valid or in line with the best practice. And for folks that have done this in their project, what did you do ?
Any help will be most appreciated.
Data Access Objects must be enhanced to support reading from a TOPLink unit of work when using an external transaction controller. Developers must consider what impact a global transaction will have on the methods in their data access objects (DAOs).
The following findSomeObject method is representative of a finder in the current implementation of our DAOs. It is not especially designed to execute in the context of a global transaction, nor read from a unit of work.
public findSomeObject(ILoginUser aUser, Expression queryExpression)
ClientSession clientSession = getClientSession(aUser);
SomeObject obj = null;
try
ReadObjectQuery readObjectQuery = new ReadObjectQuery(SomeObject.class);
readObjectQuery.setSelectionCriteria(queryExpression);
obj = (SomeObject)clientSession.executeQuery(readObjectQuery);
catch (DatabaseException dbe)
// throw an appropriate exception
finally
clientSession.release();
if (obj == null)
// throw an appropriate exception
return obj;
However, after making the following changes (in blue) the findSomeObject method will now read from a unit of work while executing in the context of a global transaction.
public findSomeObject(ILoginUser aUser, Expression queryExpression)
Session session = getClientSession(aUser);
SomeObject obj = null;
try
ReadObjectQuery readObjectQuery = new ReadObjectQuery(SomeObject.class);
readObjectQuery.setSelectionCriteria(queryExpression);
if (TransactionController.getInstance().useExternalTransactionControl())
     session = session.getActiveUnitOfWork();
     readObjectQuery.conformResultsInUnitOfWork(); }
obj = (SomeObject)session.executeQuery(readObjectQuery);
catch (DatabaseException dbe)
// throw an appropriate exception
finally
if (TransactionController.getInstance().notUseExternalTransactionControl())
     session.release();
if (obj == null)
// throw an appropriate exception
return obj;
When getting the TOPLink client session and reading from the unit of work in the context of a global transaction, new objects need to be cached.
public getUnitOfWork(ILoginUser aUser)
throws DataAccessException
     ClientSession clientSession = getClientSession(aUser);
     UnitOfWork uow = null;
     if (TransactionController.getInstance().useExternalTransactionControl())
          uow = clientSession.getActiveUnitOfWork();
          uow.setShouldNewObjectsBeCached(true);     }
     else
          uow = clientSession.acquireUnitOfWork();
     return uow;
}

As it generally is with this sort of question there is no exact answer.
The only required update when working with an External Transaction is that getActiveUnitOfWork() is called instead of acquireUnitOfWork() other than that the semantics of the calls and when you use a UnitOfWork is still dependant on the requirements of your application. For instance I noticed that originally the findSomeObject method did not perform a transactional read (no UnitOfWork). Has the requirements for this method changed? If they have not then there is still no need to perform a transactional read, and the method would not need to change.
As for the requirement that new object be cached this is only required if you are not conforming the transactional queries and adds a slight performance boost for find by primary key queries. In order to use this however, objects must be assigned primary keys by the application before they are registered in the UnitOfWork.
--Gordon

Need advise for a good book

Similar Messages

Maybe you are looking for