Need ALOT of help for itunes?
Ok,well i just got a new computer and i had backed up all my songs from my old computer to a cd.
My old computer was an Emachine. When i tried to back up the songs to my computer it would not work,so I used my ipod to put my songs into itunes.After authorizing it,I did not get all my songs into the MUSIC folder
So my question is-
How do i get ALL my songs to the playlist?The ones that are burned from my cds
and
How do i recreate all my playlists i had?
I thought that i would get them back and i am not sure how to do it
Thanks
How did you back up the songs - in iTUnes, or just using WIndows explorer to copy the music files to CD?
Similar Messages
-
Need alot of help for this huge probl
I purchased my zen 3 months ago, during that time I've listened to music on it, sometimes I'd even put files on it for storage. But now, all of a sudden I connect it to my USB port and it gives me an error stating that there was an I/O device error. Help on this will be much appreciated.
Please remove the battery and connect the unit to a PC.
Note that music and data on the unit is to be considered lost. Do not proceed unless you can accept that the player will be emptied.
Download the following firmware file:
http://uk.europe.creative.com/support/downloads/download2.asp?MainCategory=23&Product=2720&dlcentr ic=9639&Product_Name=ZEN+Nano+Plus&OSName=Windows+ XP
Be sure to select "Format Data Area" before you start the upgrade process. Once the Close button becomes acti've, click it. Now, go into My Computer, right click on the MuVo 'removable dri've' and select Format.
Format the dri've in the FAT32 file system.
You can now write your backup back to the MuVo. Use the safe hardware removal icon (green arrow near the clock). Once unplugged, you can replace the battery. The player should now operate normally.
If this is not the case, please contact customer support and request an RMA. Note that this only applies if the player is under 2 months old. -
Space recovery. Need ALOT OF HELP!!
Help! I feel so bad.. I accidently made bootcamp make a partition and it took 20g of my macbook air. So i removed the partition of my mac and I Still have the same amount of space.
I had 33G at first
but when I accidently made the partition
I now have 13G
HOW DO I RECOVER THE FREE SPACE?!?!?!
I NEED ALOT OF HELP I FEEL SOOO BAD
I got this mac this year for christmas and I've already ruined it..
Please oh please help me!Use Disk Utility
Applications->Utilities->Disk Utility
1. Highlight the Disk in the left panel
2. Select the Partition Tab
3. Expand the volume immediately above it by dragging its resize corner
4. Click Apply
See also : http://macs.about.com/od/applications/ss/diskutilitysize_5.htm -
Need to authorize computer for iTunes
need to authorize computer for iTunes, mac pro
Move the cursor to the very top of the computer's screen, click on Store, and choose Authorize this Computer.
(113588) -
Windows Media Player is ******* me off...Need help for iTunes
Ok, so recently my computer went haywire on me, and I had to start from scratch by basically wiping the HD and now installing Windows Vista (I used to have XP). I did back up all my songs on my external before hand.
So now that everything SHOULD be up and running, I transferred all my songs back to my C:\.
Yet...now when I go to "play all" (in order for iTunes to reference them), it says "Play All with Windows Media Player" and WMP thinks it has the rights to all the song files. I use iTunes for everything and I can't find the option part on either software to make iTunes the primary again.
I used to be an IT major...
Now I think that's in the past...lol.
I need help. Who knows how to fix it?
(Oh, and if you know a way to get them all to register instead of me going by artist by cd to play, that'd be appreciated too! :D)This article tells you how to set itunes as the default media player in Vista.
http://support.apple.com/kb/TA27514
To get them all in your itunes library, drag the top-level music folder over from Win Explorer to the itunes window. You don't need to add things one-by-one!
Alterantivly, you can use itunes menu > File > Add folder to library and do the same thing. -
Need QUICK! help for Quicktime Pro Install
I came in this morning knowing I'd be pressed for time, and that I needed to convert a WMA file to an MP3 for a meeting. I decided to use Quicktime Pro 7. I made the purchase and have been trying for a 45 minutes of precious time to get it installed but am running into one bit of crap instructions after another. First, the instructions say to go into my system preferences and click the Quicktime icon. There isn't one. Next it says to download Quicktime 7 and load Quicktime Pro as an upgrade to that. Downloaded QT7, installed and it went off into space somewhere. Not in my applications folder.
I'm running out of time. Why can't this just be an install process like any other normal program intead of making a person crazy?
Any help would be appreciated.
Runing OS 10.6.8 on a hugely capable system.
CayceOh, I think I get it now. So Quicktime Pro 7 will never show up as Quicktimje Pro 7, as advertised, but will be cleverly hidden within Quicktime Player 7 so that after it is actually loaded, it will still be called Quicktime Player 7, and there will be no visually recognizeable evidence that the install was successful, unless you've experienced this before and know what to drill down & look for, which rarely is the case when a person purchases and installs a software for the first time.
Both the Registration and About windows will display the normal QT 7 icon with the "Pro" text embedded to indicate QT 7 is properly keyed for "Pro" use, as well as, "un-greying" the "Pro" specific options in various menu windows when content is loaded/a player window has been opened. As explained on various Apple web pages, purchasing the "Pro" key does not add any new codecs and does not download any new software. It only turns on the track/layer editing and conversion features for direct access from within QT 7 without having to purchase a full editing app like FCP. This is the way classic QT has worked for the last decade since I started using v5.
Thanks for the kind and thorough assist, though, Jon. I'll manage from here. Curious about the South Jersey Apple Users Group. I'm up at the northern border, in the lakes region, town called Ringwood.
The SJAUG primarily hosts membership throughout "South" Jersey (i.e., from Burlington County to Cape May County.) In the past, when membership was more active, we actually held meetings twice a month (Medford leas and Pine Hill School) to host a split membership. The Video SIG used to be quite active but between the split meetings, dwindling membership, aging membership (many have been members for 10-15 years and at 66, I am considered one of the younger members), and closing of the Pine Hill meeting venue (Pine Hill meeting members now usually go to the MUGSNJ at Gloucester County College), our membership and SIG activities have greatly been reduced over the last few years. In any case, we normally meet the third Saturday of each month at the Meford Leas facility just off Rt 70 in Medford. (http://www.sjaug.org)
I have not visited user groups farther north than the Princeton area. Would invite you down to the next meeting (26 Jan '13) but I'm sure there are closer groups if you are interested. Retired, my video/QT interests are promarily centered on the creating and maintaining of my own personal video library for iTunes/TV/Airvideo management/streaming of content. -
Need PP Functional help for some legacy fields
Hi all,
I am a BW consultant. I need to replicate in SAP-BW some reports that are currently in a legacy system (non SAP). I have identified the functional area for those reports as PP. I need a little functional help from you guys to find out what some fields in the legacy system mean in SAP. Once I know the R/3 fields (and source tables if someone can tell me), I can move forward with mapping those fields into BW objects and the rest of the process.
The reason why I am seeking help from here is, unfortunately our functional team is not available right now and their availability is indefinite. So I just want to keep myself busy till they are back.
Well, here are the fields that I need help for (for now)
The report is for Daily summary of activities at a plant
Work order process
Work order type
Daily Created Bags
Daily Capacity Bags (Bags per Hour Rate* Available Hours)
Daily Count of Work Order Number
Goods issued for work order completion
Goods finished
Please help me identify what R/3 fields (and their tables) correspond to the above legacy fields
Points WILL be assigned for helpful answers
Thank youHi,
Work order process - I assume this is the set of operations for the order - AFVC (table)
Work order type - AUFK - (Field) AUART data needs to be fetched for AUFNR(Work order number)
Daily Created Bags - MSEG - data needs to be fetched for BWART = 101 or 102 and AUFNR(Work order number)
Goods issued for work order completion - MSEG- data needs to be fetched for BWART = 261 and AUFNR(Work order number)
Goods finished - MSEG - data needs to be fetched for BWART = 101 or 102 and AUFNR(Work order number)
Regards,
Prasobh -
Help Needed Created Standalone Network for iTunes DJ
I use my MBP to manage backing tracks for a band. I would like to use iTunes DJ for requests from the audience via wireless connection via *iPhone/iPod Touch Remote app*. I would use this option in conjunction with a printed song list and small request cards (for those who don't have iPhones).
I can't connect to an existing network as most venues do not have wireless. I would like to set up my MBP as a wireless base station that can be accessed via an iPhone/iPod Remote app. Besides, I would prefer to have a network that echo's the band's name.
I know I have to use the "*Create computer-to-computer Networks*", but I am unsure of what settings I need to get the network working.
I will use Locations to quickly activate the MBP as the base station.
Any help or suggestion setting up my MBP as a wireless base station would be greatly appreciated.
TIATSG wrote:
yep, tried changing cables....even upto cat6!!! no joy.
starting to do my head in now.....might call in a network person/tech but i hate the idea of being charged to see him repeat all i have already done!
Agreed. I'd keep at it yourself. I guarantee it will be something simple.
what are the benefits of a switcher? (never used one before) any recomends?
A switch is just like a hub, except that instead of always sending packets to your entire network, it only sends them where they need to go. The benefits grow with the size and speed of your network. Switches used to be much more expensive than hubs but not any more. Normally I'd recommend almost any Linksys device, but in this case dlink seems to have a better one:
http://www.amazon.com/D-Link-DGS-2205-5-port-Desktop-Switch/dp/B000FIVDIA
Again, I don't think your dlink hub is responsible for this dramatic bottleneck though. -
Hello, I am trying several hours to find or download iTunes Player for my iTunes but with no luck.please let me know what I am doing wrong or where I must go to download it.thank you in advance.
On your PC you need the latest Apple iTunes.
Download iTunes Now
iTunes 11 for Windows: Sync your device over a Wi-Fi network -
Need Help for Itunes and quicktime
Hi there,
I just formated my computer and my os is windows 2003 server. When I installed itunes, everything is fine however when I installed quicktime I got an error code : -3. What's going on? and after I done with the installation, I couldn't open an itunes as well I got an error message said : The exception Privileged instruction. (0xc0000096) occurred in the application at location 0x7ca2af84. I don't know what happened I did install itunes and quick time under windows 2003 before and it works fine, but now I got an error. I appreciate the answer, Thanks in advance.by any chance, did you try downloading the QT Player
from the "QuickTime 7.1 with iTunes 6 for Windows
2000/XP" link on the QT download page? that one
actually leads to an itunes/QT installer bundle.
I did it this way
let's try a careful standalone QT 7.1 reinstall.
download and save a copy of the QT 7.1 standalone
installer to your hard drive. (we'll run the install
from there rather than online.) switch off
antivirus and antispyware applications prior to the
install.
Quicktime 7.1 Standalone Installer
if that install goes through okay, does your itunes
launch properly again?
I did like you said and I can not even uninstall quicktime from my computer. When I double click the installation package: It shows
Unhandled Exception
Error Number : 0x80040707
Description : DLL function call crashed : QTInstallCode.QuickTimeUninstallProc
Setup will now terminate
Also, itunes does not launch properly. I think there is something wrong because when I install the windows from the cd I can install and run these two programs(itunes and quicktime). They work fine and no problem at all. However, after I update windows by using windows update web site, I couldn't use these programs since then. I have no idea what is going on? Before I reinstall my os, I also use windows server 2003 with sp1 and I could run these two programs. I think may be the new version of itunes and quicktime that they put on the web site have some issues with the windows server 2003, not sure about that.
Thanks.
(if you get an error message on the QT standalone
reinstall, let us know what it says. include error
message numbers if you're getting any.)
love, b -
I am creating a program so that games can be purchased, which was going well up until i added the add and remove code.
I get multiple compilation error messages from most of the files as they are working in conjunction with each other.
I have created a seperate file so that i can add games and save them in a .dat file so that they are avaliable to the main program which also does not compile successfully.
When the program starts the list of games for sale should automatically be filled from an input data file which must contain read and write list methods. therefore, i have created the following files Game.java, GameList.java and GameFileHandler.
Would anyone be able help? Any help would be grately appreciated.
I have included the files needed to run the program.
RunMobileGame
import java.awt.*;
public class RunMobileGame { // Begin Class
public static void main (String[] args) { // Begin Main
EasyFrame frame = new EasyFrame();
frame.setTitle("Game Purchase for 3G Mobile Phone");
MobileGame purchase = new MobileGame(frame); //need frame for dialog
frame.setSize(500,300); // sets frame size
frame.setBackground(Color.lightGray); // sets frame colour
frame.add(purchase); // adds frame
frame.setVisible(true); // makes the frame visible
} // End Main
} // End Class
MobileGame
import java.awt.*;
import java.awt.event.*;
class MobileGame extends Panel implements ActionListener { // Begin Class
The Buttons, Labels, TextFields, TextArea
and Panels will be created first.
private Panel topPanel = new Panel();
private Panel middlePanel = new Panel();
private Panel bottomPanel = new Panel();
private Label saleLabel = new Label ("Java Games For Sale",Label.RIGHT);
private TextArea saleArea = new TextArea(7, 25);
private Button addButton = new Button("Add to Basket");
private TextField add = new TextField(3);
private Label currentLabel = new Label ("Current Basket",Label.RIGHT);
private TextArea currentArea = new TextArea(3, 25);
private Button removeButton = new Button("Remove from Basket");
private TextField remove = new TextField(3);
private Button purchaseButton = new Button("Purchase");
private ObjectList gameList = new ObjectList(20);
Frame parentFrame; //needed to associate with dialog
All the above will be added to the interface
so that they are visible to the user.
public MobileGame (Frame frameIn) { // Begin Constructor
parentFrame = frameIn;
topPanel.add(saleLabel);
topPanel.add(saleArea);
topPanel.add(addButton);
topPanel.add(add);
middlePanel.add(currentLabel);
middlePanel.add(currentArea);
bottomPanel.add(removeButton);
bottomPanel.add(remove);
bottomPanel.add(purchaseButton);
this.setLayout(new BorderLayout());
add("North", topPanel);
add("Center", middlePanel);
add("South", bottomPanel);
addButton.addActionListener(this);
removeButton.addActionListener(this);
purchaseButton.addActionListener(this);
The following line of code below is
needed inorder for the games to be
loaded into the SaleArea
MobileGame aMobileGame;
if (! GameFileHandler.readRecords(dataList)); { // Read records from data file
} // End if
for (int i=1; i <= dataList.getTotal(); i++) { // Begin for
aMobileGame = (MobileGame) dataList.getObject(i);
saleArea.append(i + " " + aMobileGame.getName()
+ " " + aMobileGame.getText()
+ " " + aMobileGame.getPrice()
+ "\n");
} // End for
} // End Constructor
All the operations which will be performed are
going to be written below. This includes the
Add, Remove and Purchase.
public void actionPerformed (ActionEvent e) { // Begin actionPerformed
If the Add to Basket Button is pressed, a
suitable message will appear to say if the game
was successfully added or not. If not, an
ErrorDialog box will appear stateing the error.
if(e.getSource() == addButton) { // Begin Add to Basket
MobileGame aMobileGame;
try { // Begin Try
if (dataList.isEmpty() ) { // some validation
new ErrorDialog(parentFrame,"No Games Avaliable to Add");
} else if (add.getText().length() == 0 ) {
new ErrorDialog (parentFrame,"Feild Blank");
} else if (Integer.parseInt(add.getText())<= 0
|| Integer.parseInt(add.getText())> dataList.getTotal()) { // Begin Else If
new ErrorDialog (parentFrame,"Invalid Game Number");
} else { // Begin Else If
int i = Integer.parseInt(add.getText());
aMobileGame = (MobileGame) dataList.getObject(i);
currentArea.append(i + " " + aMobileGame.getName()
+ " " + aMobileGame.getText()
+ " " + aMobileGame.getPrice()
+ "\n");
} // End Else
} catch (NumberFormatException num) { // Begin Catch
new ErrorDialog(parentFrame,"Please enter an Integer only");
} // End Catch
} // End Add to Basket
add.setText(""); // Clears any characters entered in the addFeild
If the Remove From Basket Button is pressed, a
a suitable message will appear to say if the
removal was successful or not. If not, an
ErrorDialog box will appear stateing the error.
if(e.getSource() == removeButton) { // Begin Remove from Basket
MobileGame aMobileGame;
try { // Begin Try
if (dataList.isEmpty() ) { // some validation
new ErrorDialog(parentFrame,"No Games Avaliable to Remove");
} else if (remove.getText().length() == 0 ) {
new ErrorDialog (parentFrame,"Feild Blank");
} else if (Integer.parseInt(remove.getText())<= 0
|| Integer.parseInt(remove.getText())>=21) { // Begin Else If
new ErrorDialog (parentFrame,"Game Number out of Range");
} else { // Begin Else If
int num = Integer.parseInt(remove.getText());
boolean ok = dataList.remove(num);
currentArea.setText(""); // Clear the textArea
for (int i = 1; i <= dataList.getTotal(); i++) { // Begin for
aMobileGame = (MobileGame) dataList.getObject(i);
currentArea.append(i + " " + aMobileGame.getName()
+ " " + aMobileGame.getText()
+ " " + aMobileGame.getPrice()
+ "\n");
} // End for
} // End Else
} catch (NumberFormatException num) { // Begin Catch
new ErrorDialog(parentFrame,"Please enter an Integer only");
} // End Catch
} // End Remove from Basket
If the purchase button is pressed, the
following is executed. NOTE: nothing is done
when the ok button is pressed, the window
just closes.
if(e.getSource() == purchaseButton) { // Begin Purchase
String gameEntered = currentArea.getText();
if (gameEntered.length() == 0 ) {
new ErrorDialog (parentFrame,"Nothing to Purchase");
} else { // Begin Else If
new CreditDialog(parentFrame,"Cost � 00.00. Please enter Credit Card Number");
} // End Else
} // End Purchase
} // End actionPerformed
} // End Class
ObjectList
class ObjectList
private Object[] object ;
private int total ;
public ObjectList(int sizeIn)
object = new Object[sizeIn];
total = 0;
public boolean add(Object objectIn)
if(!isFull())
object[total] = objectIn;
total++;
return true;
else
return false;
public boolean isEmpty()
if(total==0)
return true;
else
return false;
public boolean isFull()
if(total==object.length)
return true;
else
return false;
public Object getObject(int i)
return object[i-1];
public int getTotal()
return total;
public boolean remove(int numberIn)
// check that a valid index has been supplied
if(numberIn >= 1 && numberIn <= total)
{ // overwrite object by shifting following objects along
for(int i = numberIn-1; i <= total-2; i++)
object[i] = object[i+1];
total--; // Decrement total number of objects
return true;
else // remove was unsuccessful
return false;
GameList
import java.awt.*;
class GameList extends ObjectList { // Begin Class
public Game getGame(int indexIn) { // call inherited method and type cast
return (Game)getObject(indexIn);
public GameList(int sizeIn) { // call ObjectList Constructor
super(sizeIn);
} // End ObjectList Constructor
public Game search(int gameIn) { // Begin search
for(int i=1;i<=getTotal();i++) { // find tenant with given room number
if(getObject(i).getObject() == gameIn) { // Begin if
return getObject(i);
} // End if
} // End for
return null; // no game found
} // End Search
} // End Class
GameFileHandler
import java.awt.*;
import java.io.*;
class GameFileHandler { // Begin class
public static void saveRecords(int noOfGamesIn, GameList listIn) {
try { // Begin Try
FileOutputStream gameFile = new FileOutputStream("dataList.dat");
DataOutputStream gameWriter = new DataOutputStream(ListIn);
gameWriter.writeInt(listIn.getTotal());
for(int i=1; i <= noOfGamesIn; i++) { // Begin for
if(listIn.getGame(i) != null) { // Begin if
gameWriter.writeInt(i);
gameWriter.writeUTF(listIn.getObject(i).getName());
gameWriter.writeUTF(listIn.getObject(i).getText());
gameWriter.writeUTF(listIn.getObject(i).getPrice());
for(int i = 1; j<= listIn.getObject(i).getTotal(); i++) { // Begin for
} // End for
} // End if
} // End for
gameWriter.flush();
gameWriter.close();
} catch (IOException ioe) {
System.out.println("Error writing file");
} // End catch
} // End Save
public static void readRecords(GameList listIn) { // Begin read
try { // Begin Try
FileInputStream gameFile = new FileInputStream("Games.dat");
DataInputStream gameReader = new DataInputStream(ListIn);
int tempObject = 0;
String tempName = new String("");
String tempText = new String("");
String tempPrice = new String("");
double tempAmount = 0 ;
Game tempGame = null;
int tot = 0;
int totpay = 0;
tot = gameReader.readInt();
for(int j = 1; j<=tot; j++) { // Begin for
tempObject = gameReader.readInt();
tempName = gameReader.readUTF();
tempText = gameReader.readUTF();
tempPrice = gameReader.readUTF();
tempGame = new Game(tempGameNo,tempGameName,tempGameQty,tempGamePrice);
totpay = gameReader.readInt();
listIn.add(tempGame);
} // End for
gameReader.close();
} catch(IOException ioe) { // Begin Catch
System.out.println("No Games found");
} // End catch
} // End read
} // End class
Game
class Game { // Begin Class
private int game;
Game (int gameIn) { // Begin Game
game = gameIn;
} // End Game
public String getName() { //begin getName
return name;
} //end getName
public int getText() { //begin getText
return text;
} // end getText
public int getPrice() { //begin getPrice
return price;
} // end getPrice
} //End Class
ErrorDialog
import java.awt.*;
import java.awt.event.*;
class ErrorDialog extends Dialog implements ActionListener {
private Label errorLabel = new Label("Message space here",Label.CENTER);
private String errorMessage;
private Button okButton = new Button("OK");
public ErrorDialog(Frame frameIn, String message) {
/* call the constructor of Dialog with the associated
frame as a parameter */
super(frameIn);
// add the components to the Dialog
errorLabel.setText(message);
add("North",errorLabel);
add("South",okButton);
// add the ActionListener
okButton.addActionListener(this);
/* set the location of the dialogue window, relative to the top
left-hand corner of the frame */
setLocation(100,100);
// use the pack method to automatically size the dialogue window
pack();
// make the dialogue visible
setVisible(true);
/* the actionPerformed method determines what happens
when the okButton is pressed */
public void actionPerformed(ActionEvent e) {
dispose(); // no other possible action!
} // end class
EasyFrame
import java.awt.*;
import java.awt.event.*;
public class EasyFrame extends Frame implements WindowListener {
public EasyFrame()
addWindowListener(this);
public EasyFrame(String msg)
super(msg);
addWindowListener(this);
public void windowClosing(WindowEvent e)
dispose();
public void windowDeactivated(WindowEvent e)
public void windowActivated(WindowEvent e)
public void windowDeiconified(WindowEvent e)
public void windowIconified(WindowEvent e)
public void windowClosed(WindowEvent e)
System.exit(0);
public void windowOpened(WindowEvent e)
} // end EasyFrame class
CreditDialog
import java.awt.*;
import java.awt.event.*;
class CreditDialog extends Dialog implements ActionListener { // Begin Class
private Label creditLabel = new Label("Message space here",Label.CENTER);
private String creditMessage;
private TextField remove = new TextField(20);
private Button okButton = new Button("OK");
public CreditDialog(Frame frameIn, String message) { // Begin Public
super(frameIn); // call the constructor of dialog
creditLabel.setText(message);
add("North",creditLabel);
add("Center",remove);
add("South",okButton);
okButton.addActionListener(this);
setLocation(150,150); // set the location of the dialog box
setSize(300,100); // sets the size of the dialog
setVisible(true); // make the dialog box visible
} // End Public
public void actionPerformed(ActionEvent e) { // Begin actionPerformed
dispose(); // close dialog box
} // End actionPerformed
} // End Class
CreateDataFile
import java.awt.*;
import java.awt.event.*;
class CreateDataFile extends Panel implements ActionListener {
private Panel input = new Panel();
private Panel buttons = new Panel();
private Label gameLabel = new Label("Game Description",Label.RIGHT);
private TextField game = new TextField(18);
private Label cataloqueLabel = new Label("Cataloque Number",Label.RIGHT);
private TextField cataloque = new TextField(4);
private Label priceLabel = new Label("Price in pounds",Label.RIGHT);
private TextField price = new TextField(6);
private Button inputButton = new Button("Input Data");
private Button listButton = new Button("List Data");
private Button eraseButton = new Button("Erase No");
private TextField erase = new TextField(2);
private Button saveButton = new Button("Save Data");
private Button loadButton = new Button("Load Data");
private Button quitButton = new Button("Quit");
private TextArea listArea = new TextArea(10, 30);
private ObjectList dataList = new ObjectList(20);
Frame parentFrame; // needed to associate with dialog
public CreateDataFile(Frame frameIn) { //begin constructor
parentFrame = frameIn;
input.add(gameLabel);
input.add(game);
input.add(cataloqueLabel);
input.add(cataloque);
input.add(priceLabel);
input.add(price);
buttons.add(inputButton);
buttons.add(listButton);
buttons.add(eraseButton);
buttons.add(erase);
buttons.add(saveButton);
buttons.add(loadButton);
buttons.add(quitButton);
this.setLayout( new BorderLayout());
add("North",input);
add("Center",buttons);
add("South",listArea);
inputButton.addActionListener(this);
listButton.addActionListener(this);
eraseButton.addActionListener(this);
saveButton.addActionListener(this);
loadButton.addActionListener(this);
quitButton.addActionListener(this);
} //end constructor
public void actionPerformed(ActionEvent e) { //begin actionPerformed
MobileGame aMobileGame;
try { //begin try
if (e.getSource() == inputButton) { //begin if
if(game.getText().length()==0|| cataloque.getText().length()==0|| price.getText().length()==0) { //begin if
new ErrorDialog(parentFrame,"All Field(s) Must be Emtered");
} else if(dataList.isFull() ) { //begin else if
new ErrorDialog(parentFrame,"List Full");
} else { //begin else
aMobileGame = new MobileGame (game.getText(),cataloque.getText(),Double.parseDouble(price.getText()));
dataList.add(aMobileGame);
game.setText("");
cataloque.setText("");
price.setText("");
}// end else
}// end inputbutton
} catch (NumberFormatException ex) { // Catch invalid price error
if (price.getText().length()!=0) { //Begin ErrorDialog
new ErrorDialog(parentFrame,"Invalid price");
} //end ErrorDialog
} //end catch
if (e.getSource() == listButton) { //begin listButton
if (dataList.isEmpty() ) { //begin if
new ErrorDialog(parentFrame,"The Datalist is Empty");
} else {
listArea.setText(""); // clear textArea first
for (int i=1; i <= dataList.getTotal(); i++) {
aMobileGame = (MobileGame) dataList.getObject(i);
listArea.append(i + " " + aMobileGame.getName()
+ " cat no: "+ aMobileGame.getText()
+ " price: "+aMobileGame.getPrice()+"\n");
} //end for
}// end if
} // end listButton
if (e.getSource() == eraseButton) { //begin eraseButton
try { //begin Try
if (dataList.isEmpty() ) { //begin isEmpty
new ErrorDialog(parentFrame,"Nothing to Erase");
} else if ( erase.getText().length()==0 ) { //begin if
new ErrorDialog(parentFrame,"Erase Field Balnk");
} else if(Integer.parseInt(erase.getText())<=0 || Integer.parseInt(erase.getText())>20){ //begin if
new ErrorDialog(parentFrame,"Number out of Range");
} else { //begin else
int num = Integer.parseInt(erase.getText());
boolean ok = dataList.remove(num);
listArea.setText("");
erase.setText("");
for(int i=1; i<=dataList.getTotal(); i++){ //begin for
aMobileGame = (MobileGame)dataList.getObject(i);
listArea.append(i + " " + aMobileGame.getName()
+ " cat no: "+ aMobileGame.getText()
+ " price: "+aMobileGame.getPrice()+"\n");
} //end for
}// end if
} catch (NumberFormatException ex) { //begin catch
if(erase.getText().length()!=0) {// begin ErrorDialog
new ErrorDialog(parentFrame,"Invalid Format");
} //end ErrorDialog
erase.setText("");// to clear the erase filed first
} //end catch
} //end eraseButton
if (e.getSource() == loadButton) { //begin loadButton
if ( ! GameFileHandler.readRecords( dataList)) { //begin readRecords
} //end readRecords
} // end if
if (e.getSource() == saveButton) { //Begin saveButton
if (dataList.isEmpty() ) { //begin dataList
new ErrorDialog(parentFrame,"The GameList is Empty");
} else if ( ! GameFileHandler.saveRecords( dataList) ) { //begin else
new ErrorDialog(parentFrame,"Error Saving File");
} // end if
} //end saveButton
if(e.getSource() == quitButton){ //begin quitButton
System.exit(0);
} // end quitButton
}// end actionPerformed
}//end class CreateDataFile
I know that there are alot of files, but most is ok and i have made it easy to understand.If you want you can give me your email address so we can message eachother quicker than checking here every 15 minutes. I can help you during the evenings because you need a lot of work.
-
Hello, I want telecharge Itune 11, for IOS 7 and my computer is 10.5 please help me
You NEED to update to 10.6.8
You can get 10.6 from Apple: http://store.apple.com/us/product/MC573Z/A/mac-os-x-106-snow-leopard
and then run the combo updater to update it to 10.6.8 -
Why do I have to pay to get help for Itunes?
First off, why do I have to pay to get help?
That is absolutely ridiculous when it is someone's JOB to be a "support" for this.
I've had a reoccuring problem of my music not playing on my IPhone. I fixed it the first time by taking off all the music then re-syncing it and it was all good. This time I am trying to take all of the music off so I can try to do the same thing as before because this is happening yet AGAIN and now my ITunes isn't taking the music off and it is re-syncing it back and it isn't taking the music off in the first place. Why is it doing this? Well I'm basically venting to a community while getting no help from experts. Thank you for nothing Apple.Apple provides telephone support for their hardware products at no charge for 90 days after purchase. If you are beyond that period and do not have AppleCare on your device, then you will be charged for the support call. If you don't want to pay, you can either make an appointment at an Apple Store, if you have one in your area, where you will be helped at no charge, or you can post details of the problem here where perhaps we, your fellow users, can assist.
I'm basically venting to a community while getting no help from experts.
You're getting no help because you're just venting, and most people here just ignore rants. You haven't posted sufficient details about your issue for anyone to offer much in the way of assistance.
Posting the same complaint twice does little good, by the way.
Regards. -
Okay, here's the story: I just upgraded from a Dell Latitude (Vista Pro). I have an iPhone with HUNDREDS of contacts. Will someone please tell me how to import my iPhone contacts onto the new MacBook? i have a bunch of apps and quite a bit of music but my real concern is the contacts.
Thanks in advance,
RhynoCongratulations.
Before syncing contacts with the Address Book application on your Mac which is selected under the Info tab for your iPhone sync preferences with iTunes, enter one contact in the Address Book on your Mac. Make the contact up if needed which can be deleted later. This will provide a merge prompt with the first sync for this data, which you want to select.
The same applies to syncing calendar events with iCal on your Mac before the first sync for this data.
You can transfer your iTunes library from your PC to your Mac per the directions included with this link.
http://support.apple.com/kb/HT1751 -
Need Palmcertificates help for Centro
Hello,
Need to load a security certificate from my employer to utilize my outlook mail. After using "PalmCertificates" the program looks for the Palmquickinstall. Since I have the desktop with the install tool, the certificate program does not recognize this and gives me an error "Can't find Quickinstall"... How can we install security certificates onto a Centro (sprint network)...
I appreciate the help in advance. Thanks.Minitones looks for .mp3 files stored on an expansion (Secure Digital) card. You'll need to purchase/install a Micro SD card to use it.
There is a pretty clear guide on the Centro (AT&T) support site which describes the built-in capability to convert songs to ringtones. This thread is stickied at the top of this board.
In short, you can also use the Web browser to convert the files on your SD card. if you don't have a SD card, you can have someone send you the files with the messaging application as a multimedia message.
Post relates to: Centro (AT&T)
Message Edited by smkranz on 11-07-2008 04:48 PM
smkranz
I am a volunteer, and not an HP employee.
Palm OS ∙ webOS ∙ Android
Maybe you are looking for
-
I've bought several apps before that work fine. All of a sudden I try to download yelp and it says it is works then it's not on the screen and I can't open it in the downloads section. Any ideas on what to do???
-
Deploying Java Web Application (WAR-File) into a cluster environment
Hi, we have a web application which has to read from and write to the file system. Since a short time we have a cluster environment (2 parallel servers) and since thisa time we have the problem, that files are worked double in the cluster. The applic
-
"Full Screen Mode" in Adobe Reader XI for Windows 8 loads way too slow!
I recently got a new laptop with Windows 8, after having used Windows Vista for years. I installed Adobe Reader XI for my new computer. Before, I used Adobe Reader X on Vista. I used Adobe Reader "Full Screen Mode" to read the nice-looking Bible c
-
Why can't I sync iTunes music to my nano?
I just bought an Apple Nano and I cant get my music thats in my music cloud to transfer to the Nano. Someone Help!!!
-
T410 i3, integrated graphics, 1080p playback
Hey guys, Sorry if this seems to be a topic that pops up over and over on the internet. I've been digging around a lot and have failed to find any definite answers to this question. It seems like some review sites are saying that the T410 has no prob