Need an outliner - high level view...

Does InDesign have anything like an outliner? I'm looking for the ability to view (and possibly) rearrange large blocks of text. What I'm looking for is sort of like a TOC, but I'd like to not have to regenerate a TOC every time I need to see how my organization of the information has changed. I know that Story Editor does a little of this, but it also puts in all the body text, and I just need to see the headings.
I know a little bit about XML and InDesign, but I've never practically used it, so I'm not sure if that would do the trick. My understanding is that XML structured is applied spearately from ID paragraphs tags, and can be applied indepently of formatting. Is this correct?
Thanks.

Hi Gregory,
I guess the answer is that this depends. My first question is whether you are looking at a Relational OLAP or Multi Dimensional OLAP solution? This may change the discussion slightly, but just lets look at some thoughts:
In essence you can use the OWB bridge to generate the AW objects (cubes etc). If you do that (for either ROLAP or MOLAP) you will get the AW objects enabled for querying, using any OLAPI query tool, like BI Beans or the new Discoverer for OLAP. The current OWB release does not run the discoverer enabler (creating views specifically written for EUL support in Disco classic).
So if you are looking at Disco classic you must use the AWM route...
The other things that you must be aware off is that the OWB technology is limited to cloning the relational objects for now. This means that you will create a new model based on your existing data. If you want to tweak the objects generated you will probably need to go to the underlying code in either scenario.
So if you want to create calculated measures for example you could generate a cube with OWB, create a "dummy measure" and add the formula in OLAP DML. The same will go for some other objects you may want to create such as text measures...
The benefit of creating place holder or dummy measures is that the metadata is completely in order, you simply change the measure's behavior...
For the future (the beta starts relatively soon) OWB will support much more modeling, like logical cubes and you can then directly deploy to OLAP. Also the mappings are transparent to the storage. So you map to a logical cube and OWB will implement the correct to load either OLAP or relational targets.
We will also start supporting calculated measures, sparsity definitions, partioning and compression on cubes, as we will support parallel building of cubes.
Hope this gives you some insight!
Jean-Pierre

Similar Messages

High-level view of steps for 10g OWB-OLAP to Discoverer

I would greatly appreciate ANY feedback to the following steps. These are not necessarily correct or the best way to do this. I am attempting to take source data, use OWB, create the analytical workspace, and from there have the metadata available and used by Discoverer.
This is rather high-level, feel free to jump in anywhere.
We are trying to see if we can get away with NOT using the Analytical workspace manager (AWM) if possible. With that in mind, we are trying to make the most of the process with OWB & OLAP.
Is this possible to do without ever using the AWM? Can we go end to end (source data--->discoverer final reporting) primarily using OWB to get to the point where we can use the metadata for Discoverer?
Can anyone relate experiences perhaps that would make me want to consider using the AWM at certain points instead?
Most importantly, if I do use this methodology, would I be safe after everything has been setup? WOuld I want to consider using AWM at a later point for performance reasons while I am using Discoverer? Or would OWB be helpful as well in some aspects in maintenance of data? Any clue on how often I might need to rebuild, and if so, what to use in that case to minimize time?
Thanks so much for any insight or opinion on anything I have mentioned!

Hi Gregory,
I guess the answer is that this depends. My first question is whether you are looking at a Relational OLAP or Multi Dimensional OLAP solution? This may change the discussion slightly, but just lets look at some thoughts:
In essence you can use the OWB bridge to generate the AW objects (cubes etc). If you do that (for either ROLAP or MOLAP) you will get the AW objects enabled for querying, using any OLAPI query tool, like BI Beans or the new Discoverer for OLAP. The current OWB release does not run the discoverer enabler (creating views specifically written for EUL support in Disco classic).
So if you are looking at Disco classic you must use the AWM route...
The other things that you must be aware off is that the OWB technology is limited to cloning the relational objects for now. This means that you will create a new model based on your existing data. If you want to tweak the objects generated you will probably need to go to the underlying code in either scenario.
So if you want to create calculated measures for example you could generate a cube with OWB, create a "dummy measure" and add the formula in OLAP DML. The same will go for some other objects you may want to create such as text measures...
The benefit of creating place holder or dummy measures is that the metadata is completely in order, you simply change the measure's behavior...
For the future (the beta starts relatively soon) OWB will support much more modeling, like logical cubes and you can then directly deploy to OLAP. Also the mappings are transparent to the storage. So you map to a logical cube and OWB will implement the correct to load either OLAP or relational targets.
We will also start supporting calculated measures, sparsity definitions, partioning and compression on cubes, as we will support parallel building of cubes.
Hope this gives you some insight!
Jean-Pierre

MMO3 high level view

Hello Experts,
I have a need to view a large number of material views for assigned inspection types in MM03... It is very labor intensive to view hundreds of material numbers one screen at a time to see inspection types assigned and activated.
Question: How can I view many material numbers to see inspection types assigned and activated in a list or table?
Much appreciated.
Verroz

One of the way is
QA08-->enter plant ->select deactivate inspection type>here enter the inspection type which you want to see ( attached to "which" materials)->execute--
>The list you get is "The materials for which that Inspection type is active "
and other is
QMAT table .Crewate querry in SQVI & use table QMAT .

Needed help in high level design approach of this service

I have a two Proxy services proxy service A and Proxy Service B
Proxyservice A takes the XML request from the consumer and puts the message in JMS queue(queueA) and gives an immediate acknowldgment. Proxyservice B(Async) picks that message from queue and invokes the provides, if we get any binding fault or remote fault 5 retries are made (Proxy service XA enabled and if proxy service gets errored out then message remains in same queue) and message is put into error queue( if we get any business fault the message is put into undelivered queue no retries needs to be made). So whenever the message is put into the errorqueue an email notification must be sent to the sustain team. And then the ,message needs to be moved back to the queueAso that the message gets processed again
Your help is appreciated. Need urgent help on this.
Thanks,

I have a two Proxy services proxy service A and Proxy Service B
Proxyservice A takes the XML request from the consumer and puts the message in JMS queue(queueA) and gives an immediate acknowldgment. Proxyservice B(Async) picks that message from queue and invokes the provides, if we get any binding fault or remote fault 5 retries are made (Proxy service XA enabled and if proxy service gets errored out then message remains in same queue) and message is put into error queue( if we get any business fault the message is put into undelivered queue no retries needs to be made). So whenever the message is put into the errorqueue an email notification must be sent to the sustain team. And then the ,message needs to be moved back to the queueAso that the message gets processed again
Your help is appreciated. Need urgent help on this.
Thanks,

Higher level access needed

Hi there.
We are attempting to collect Adobe licensing data for all users in our organization.
I need to get higher level access to the data on your volume licensing site.
Would someone please email me so I can get this process started?
Thank you!

You likely need to contact Adobe Support directly. These are user to user forums, although it would be nice to see Adobe taking command in monitoring this particular forum.
800-833-6687 (US daytime only 5AM-7PM PST, Monday-Friday).
For the link below click the Still Need Help? option in the blue area at the bottom and choose the chat option...
Get chat help with orders, refunds, and exchanges (non-CC)
http://helpx.adobe.com/x-productkb/global/service-b.html ( http://adobe.ly/1d3k3a5 )

High Level Network Design

Hi Guys
I am posting this because I am starting my career into network design and want some help in it. I am at present in need of a high level design overview as I need to prepare some high level network design documents. Can anyone shower some thoughts in it as how about doing this and if any there is a template for HDD so that it maybe useful.
Also I believe in keeping information as transparent as possible to the readers of the document and need someone to explain in very simple terms if at all it is possible.
Thanks a lot
Vin

Hi Vin,
I would check the Cisco SBA and Validated Design Zone as a first pass.
Lots of great design documents there.
As for how I would create a high level design - keep it simple. You just want an overview of the connectivity - e.g. for a dual-site head office with 100+ branch wan, I would only show a single branch site as a template.
Every network is different, but the more documentation you write and read the more you will define your own style.
Apologies I can't give you any of my customer's documentation - NDA's and everything!
Regards, Ash,

High level item

Dear all,
how to find the high level material for a low level material? where we link this
i know item catogery determination apart from here
where to find out that one material has high level item? when i am entering a low level item system will not accept that so we need to enter high level first and tag the low level to that.
please advice me
TIA
KOGI

hi
can i have your business senario , it will help me to understand your problem
regards
ravikant

Higher level item

Dear abap gurus,
I need to find higher level item of a given item in VBAP table.
I undersatnd that having STLNR ne INITIAL and UEPOS EQ INITIAL, makes sure it is a higher level item.
But what if there are more than 1 BOM, in that case multiple items show up for the condition above.
How do i get the higher level item material for a given item material.
Thanks

Hi,
VBAP-UEPOS should contain the higher level Item number. Please check.

"Administrator or higher level privileges." But I am the Admin!

I have a very frustrating problem. I noticed this for the first time when my printer stopped working. The scanner works, and I can run print tests from my computer but it won’t print. When I tried to reinstall the drivers I got an error message that says, “The software to be install needs Administrator or higher level privileges.” I typed in the correct password, which works for everything else. I am the only one using my computer and I am an administrator. This has never happened before.
Now I can’t install anything without this error message, not even my regular updates. Which is freaking me out.
I’ve tried everything I can think of. I’ve run disk utilities, repairs and permissions. I’ve created a new user (administrator) and tried that password/username.
I couldn’t find any other threads on here with an answer to this problem.
Thanks so much in advance if you can help me!! It is much appreciated! I have a lot of papers that are due next week and it would be awesome if I could figure this out.
Ask me anything you need to know. I have a duel power G5 with extra ram, running OS X.
Thanks again,
Jessie
[email protected]

found similar discussion elsewhere:
http://macosx.com/tech-support/update-osx-10-3-9/7699.html
.plist is temporary preference file for any application
try using file search for "installer", if "installer.plist" is not found anywhere you may need to reinstall the OS.
first you could try creating new user in System Preferences, restart computer, login as new user and try installing something.
if it works under different user, some other prefernce could have been corrupted in original setup.
in that case more drastic thing would be to log in as original user, go to your user home folder, then "library" folder and moving whole "preferences" folder to desktop.
after restart all settings will go to defaults though - network, printers, dock, desktop pics etc.
if it still won't work, OS files got corrupted and you may need to try "archive and install" option from 10.3.x installation disks:
http://docs.info.apple.com/article.html?artnum=107120
keep in mind it's a good idea to have backup of important files just in case.
try it step by step starting with creating new user and take your time.

Administrator or higher level access privileges..... HELP - my computer...

My computer and my printer all of a sudden won't talk. So I went to re-install and my computer won't let me install anything. It tells me I don't have authorization that I need 'Administrator or higher level access privileges.'
So I went into preferences to make sure that I was the authority, (as I am the only one setting the machine up, my husband uses it sometimes. ) And that appears set right. But it still won't let me install anything. And I can't print anything either. ?? HELP - QUICK -- PLEASE.... I have been trying to fix this myself for a week and can't.
Tonight I went through the apple care protection plan, and tried the quick reference guide and it tells me to put in the TechTool Deluxe and it won't give me authorization to even do that.....

ljwoodley-
Are you logged in as the administrator?
Does this happen even if you boot from DVD?
Luck-
-DaddyPaycheck

Errors in the high-level relational engine. The data source view does not contain a definition for the table or view. The Source property may not have been set.

Hi All,
I have a cube in which i'm using the TIME DIM that i created in the warehouse. But now i wanted a new measure in the cube which is Average over time and when i wanted to created the new measure i got a message that no time dim was defined, so i created a
new time dimension in the SSAS using wizard. But when i tried to process the new time dimension i'm getting the follwoing error message
"Errors in the high-level relational engine. The data source view does not contain a definition for "SSASTIMEDIM" the table or view. The Source property may not have been set."
Can anyone please tell me why i cannot create a new measure average over the time using my time dimension? Also what am i doing wrong with the SSASTIMEDIM, that i'm getting the error.
Thanks

Hi PMunshi,
According to your description, you get the above error when processing the time dimension. Right?
In this scenario, since you have updated the DSV, it should have no problem on the table existence. One possibility is that table has been specified for tracking in the notifications for proactive caching, but isn't available any more for some
reason. Please change the setting in Proactive Caching into "MOLAP".
Reference:
How To Implement Proactive Caching in SQL Server Analysis Services SSAS
If you have any question, please feel free to ask.
Best Regards,
Simon Hou
TechNet Community Support

What are the steps (High level) needed to implement US Payroll?

Hi,
What are the (high level) steps needed to implement US Payroll?
Please provide any relavent URLs for any steps if possible.
Thanks,
Prabakar

Transaction Code:-OH00
Personnel Management Personnel AdministrationOrganizational Data Organizational Assignment Define employee attributes
Transaction Code:-OH00
Personnel Management Personnel AdministrationOrganizational Data Organizational Assignment Define employee attributes
Transaction Code:-OH00
Personnel Management Personnel AdministrationOrganizational Data Organizational Assignment Define employee attributes
Transaction Code:-OH00
Personnel Management Personnel AdministrationOrganizational Data Organizational Assignment Create payroll area
Transaction Code:-OH00
Personnel Management Personnel AdministrationOrganizational Data Organizational Assignment Create payroll area
Transaction Code:-PE03
Personnel Management Personnel AdministrationOrganizational Data Organizational Assignment Check Default Payroll Area
Transaction Code:-PA03
Personnel Management Personnel AdministrationOrganizational Data Organizational Assignment Create control record
Transaction Code:-PA03
Personnel Management Personnel AdministrationOrganizational Data Organizational Assignment Create control record
Transaction Code:-OH00
Personnel Management Personnel AdministrationPayroll DataBasic PayDefine EE Sub Group Grourping for PCR and Collective Agreement Provision
Transaction Code:-OH00
Personnel Management Personnel AdministrationPayroll DataBasic PayDefine Reason for Change
Transaction Code:-OH00
Personnel Management Personnel AdministrationPayroll DataBasic PayCheck PayScale Type
Transaction Code:-OH00
Personnel Management Personnel AdministrationPayroll DataBasic PayCheck PayScale Area
Transaction Code:-OH00
Personnel Management Personnel AdministrationPayroll DataBasic PayCheck Assignment of PayScale Structure to Enterprise Structure
Transaction Code:-OH00
Personnel Management Personnel AdministrationPayroll DataBasic PayDetermine Default for PayScale Data
Transaction Code:-OH00
Personnel Management Personnel AdministrationPayroll DataBasic PaySetup Payroll Period for Collective Agreement Provision
Transaction Code:-OH00
Personnel Management Personnel AdministrationPayroll DataBasic PayDefine PayScale Salary ranges
Transaction Code:-OH11
Personnel Management Personnel AdministrationPayroll DataBasic PayWage Types Create Wage Type
Transaction Code:-OH11
Personnel Management Personnel AdministrationPayroll DataBasic PayWage Types Create Wage Type
Transaction Code:-OH00
Personnel Management Personnel AdministrationPayroll DataBasic PayWage Types Check Wage Type Group u201CBasic Payu201D
Personnel Management Personnel AdministrationPayroll DataBasic PayWage Types Check Wage Type CatalogCheck Wage Type Text
Transaction Code:-OH13
Personnel Management Personnel AdministrationPayroll DataBasic PayWage Types Check Wage Type CatalogCheck Entry Permissibility Per Infotype
Transaction Code:-OH13
Personnel Management Personnel AdministrationPayroll DataBasic PayWage Types Check Wage Type CatalogCheck Wage Type Characteristics
Transaction Code:-OH13
Personnel Management Personnel AdministrationPayroll DataBasic PayWage Types Check Wage Type CatalogCheck Wage Type Characteristics
Transaction Code:-OH00
Personnel Management Personnel AdministrationPayroll DataBasic PayWage Types Employee Sub Group Grouping for Primary Wage
Transaction Code:-OH00
Personnel Management Personnel AdministrationPayroll DataBasic PayWage Types Personnel Sub Area Grouping for Primary Wage Type
Transaction Code:-OH00
Personnel Management Personnel AdministrationPayroll DataBasic PayWage Types Define Wage Type Permissibility for each PS and ESG
Transaction Code:-OH00
Personnel Management Personnel AdministrationPayroll DataBasic PayWage Types Define Wage Type Permissibility for each PS and ESG
Transaction Code:-OH00
Personnel Management Personnel AdministrationPayroll DataRecurring Payment and DeductionDefine Reason for Change
Transaction Code:-OH11
Personnel Management Personnel AdministrationPayroll DataRecurring Payment and DeductionWage TypesCreate Wage Type Catalog
Transaction Code:-OH11
Personnel Management Personnel AdministrationPayroll DataRecurring Payment and DeductionWage TypesCreate Wage Type Catalog
Transaction Code:-OH00
Personnel Management Personnel AdministrationPayroll DataRecurring Payment and DeductionWage TypesCheck Wage Type Group u201C Recurring Payments and Deductionu201D
Transaction Code:-OH13
Personnel Management Personnel AdministrationPayroll DataRecurring Payment and DeductionWage TypesCheck Wage Type CatalogCheck Wage Type text
Transaction Code:-OH13
Personnel Management Personnel AdministrationPayroll DataRecurring Payment and DeductionWage TypesCheck Wage Type CatalogCheck Entry Permissibility Per Infotype
Transaction Code:-OH13
Personnel Management Personnel AdministrationPayroll DataRecurring Payment and DeductionWage TypesCheck Wage Type CatalogCheck Wage Type Characteristics
Transaction Code:-OH13
Personnel Management Personnel AdministrationPayroll DataRecurring Payment and DeductionWage TypesCheck Wage Type CatalogCheck Wage Type Characteristics
Transaction Code:-OH00
Personnel Management Personnel AdministrationPayroll DataRecurring Payment and DeductionWage TypesDefine Employee Sub Group Grouping for Primary Wage Type.
Transaction Code:-OH00
Personnel Management Personnel AdministrationPayroll DataRecurring Payment and DeductionWage TypesDefine Personnel Area Grouping for Primary Wage Type
Transaction Code:-OH00
Personnel Management Personnel AdministrationPayroll DataRecurring Payment and DeductionWage TypesDefine Wage Type Permissibility for each PS and ESG
Transaction Code:-OH00
Personnel Management Personnel AdministrationPayroll DataRecurring Payment and DeductionWage TypesDefine Wage Type Permissibility for each PS and ESG
Transaction Code:-OH00
Personnel Management Personnel AdministrationaPPayroll DataAdditional Payments Define Reasons for Changes
Transaction Code:-OH11
Personnel Management Personnel AdministrationaPPayroll DataAdditional Payments Wage TypesCreate Wage Type Catalog
Transaction Code:-OH11
Personnel Management Personnel AdministrationPayroll DataAdditional Payments Wage TypesCreate Wage Type Catalog
Transaction Code:-OH00
Personnel Management Personnel AdministrationPayroll DataAdditional Payments and DeductionWage TypesCheck Wage Type Group Additional Payments
Transaction Code:-OH13
Personnel Management Personnel AdministrationPayroll DataAdditional Payments and DeductionWage TypesCheck Wage Type CatalogCheck Wage Type
Transaction Code:-OH13
Personnel Management Personnel AdministrationPayroll DataAdditional PaymentsWage TypesCheck Wage Type CatalogCheck Entry Permissibility for Additional Payments
Transaction Code:-OH13
Personnel Management Personnel AdministrationPayroll DataAdditional PaymentsWage TypesCheck Wage Type CatalogCheck Wage Type Characteristics.
Transaction Code:-OH13
Personnel Management Personnel AdministrationPayroll DataAdditional PaymentsWage TypesCheck Wage Type CatalogCheck Wage Type Characteristics.
Transaction Code:-OH00
Personnel Management Personnel AdministrationPayroll DataAdditional PaymentsWage TypesDefine Employee Sub Group Grouping for Primary Wage Type.
Transaction Code:-OH00
Personnel Management Personnel AdministrationPayroll DataAdditional PaymentsWage TypesDefine Employee Sub Group Grouping for Primary Wage Type.
Transaction Code:-OH00
Personnel Management Personnel AdministrationPayroll DataAdditional PaymentsWage TypesDefine Wage Type Permissibility for each PS and ESG
Transaction Code:-OH00
Personnel Management Personnel AdministrationPayroll DataAdditional PaymentsWage TypesDefine Wage Type Permissibility for each PS and ESG
This is not the complete once just for reference purpose i have given it to u
Edited by: Sikindar on Nov 19, 2008 9:19 AM

Using High-Level API, need to use KeyRelease just for Lists

I'm coding a MIDlet with High-Level API, but I found that is really annoying to press down 30 times in a long List to reach the item you want to select. So I thought "what about pressing right/left and make it working like pressing down/up like 10 times"?
Something like this:
Canvas canvas = new Canvas() {
         public void paint(Graphics g) { }
         protected void keyPressed(int keyCode) {
            switch(keyCode) {
                case -3:mylist.setSelectedIndex(mylist.getSelectedIndex()-10,true);break;
                case -4:mylist.setSelectedIndex(mylist.getSelectedIndex()+10,true);
      }; // end of anonymous class*/But I have no idea about how to implement this =(

first of all, is there any particular reason you want to stick to the high-level API?
Well, I have already nearly 700 lines of code. I don't want to start from 0 :P
I think the best way to implement this would be to use customItems so you can control the view of the list.
I think that requires MIDP2.0 I'm trying to make it work in MIDP 1.0
The best you could do with high level UI is add navigation Commands to the List.
I have already 2 Commands per List. Not all phones have a button in the center of "cursors", so I use right button for select and left for back/exit.
Thanks for replies anyway

Need Help to identify the server hardware high level details

Hi All,
I have browsed and i couldn't find the high level hard ware details.
Can any one help me to take the below hardware HIGH level details of the sun solaris server machine.
1.CPU processor name.
2.CPU processor speed.
3.Total RAM size
4.Overall hard disk space.
Thanks in Advance,
Senthur

Hello chandandascyr07. I don't think Linksys will be able to provide you the GPIO data since it's basically a proprietary company information.

Capacity levelling view - Help needed

Hello SNP Experts,
I am looking at the capacity view of SNP and I can see total capacities and quantity of production planned in two seperate grids of the planning book.
Now suppose I load all products in below quantity view and I see prod planned quantity of say 1000 PC of product A and
2000 PC of product B in the same bucket then how can I relate this to the quantity consumption shown at the upper grid of
planning book?
How do we calculate here that these many hours would be required to produce production planned quantity mentioned below?
Thanks.
Chandan

Hi Chandan
You need to loda the capacity view on a resource basis. On the main right grid you wld see the total number of hrs consumed. Below is the Production planned & production toatl qty. You can then load which all products use the resource. Now from the PDS you can calulate which order of the product consumed how much hr of capacity.
Hope its clear.
Regards
Deven

Need an outliner - high level view...

Similar Messages

Maybe you are looking for