Need Analysis
Hi All,
I want to add another extra field in FI_AP - EDW layer DSO, what will be the impact over FI_AP - Regional DSO??
Asish
I guess i have found the reason why my authorization dosen't work. I don't activate infoObjects 0TCA* and 0TCT* and infoCubes 0TCA* as well. But another thing I am confused about is :
Should I activate HR and CO businees content for authorizations 0TCA_DS02OTCA_DS05 and 0CCA_O010CCA_O03 before i get started? or should i run generation everytime i create a new authorization using Maintenance in Rsecadmin?
Haifeng
Similar Messages
-
Need Analysis Questions for Procurement
Hi Experts,
Where could I find a set of need analysis questions to ask a potential client about their procurement process?
I am currently running my first need analysis workshop, and would like to know what kind of questions to ask the business so I can find out more about their business processess with regard to procurement.>
Lindsay Gossmann wrote:
> Hi Experts,
>
> Where could I find a set of need analysis questions to ask a potential client about their procurement process?
>
> I am currently running my first need analysis workshop, and would like to know what kind of questions to ask the business so I can find out more about their business processess with regard to procurement.
In general, the analysis should cover the following:
- Types of procurement departments, since there might be different departments for different kinds of purchases - perhaps different lines of business altogether.
- Process of procurement of each
- Centralized / decentralized processing
- Treatment of taxes / duties
- Inventory valuation procedures
- Quality checks during procurement
- Long term contracts / agreements
- Treatment of low value items (with or without purchase order)
- Approval process (release procedure)
- Stock transfer process across plants
- Subcontracting / consignment / pipeline requirements
- Process for vendor returns
- Scrap generation / storage
- Physical inventory process / frequency /writeoffs
- Treatment of freight and other charges
- Imports, if a different process is followed.
- Service procurement process
- Any special process associated with the company or industry.
Hope this covers most of the business processes related to procurement
Regards,
Aroop -
Hello all,
Is this the right forum to post TNA training needs analysis queries for CRM?
This is specific to understanding what training is required for training users in CRM?
thanksHi Abhay,
It depends on use of training. If your company wants to utilize your skills then you can suggest:
1. Training in SAMRT FORM and ADOBE Forms.
2. BADI and Related Technologies.
3. Module Pool Programming.
Even U can request for Certification that will add value to your profile.
Now if they want you to go for a course out-side.
then you can request
1. Web-Dynpro
2. ALE IDCO and Work flow
3. XI
4. BI-BW.
Hope this will help you.
<i><b>Pl. Reward points to Helpful answer, it motivates us to answer more</b></i> -
Need analysis authorization help
Hello Gurus,
Could someone please help me out with my Analysis Authorization issue?
We have a BW query and workbook outputting "Tcode usage" like the following:
UserGroup| Username| Tcodename| Frequency
This one has been running long time without any problems in reporting authorization, but now We want to get it restricted and only allow data associated group HR to display using new Analysis authorization. The scenario for this report is as follows:
1. Rsecadmin >Maintenance> Create New authorization "Group" which consists of 4 characteristics: 0TCAACTVT, 0TCAIPROV, 0TCAVALID and 0TCTUSRGRP(which is the characteristic about group name and already authorizatio relevant). Set 0TCTUSRGRP "EQ HR".
2.Assigned this authorization to a role using PFCG through the S_RS_AUTH. Other authorization objects in this role are: S_BDS_D, S_BDS_DS, S_RS_MPRO, S_RSEC, S_RS_COMP, S_RS_COMP1, S_RS_HIER, S_RS_ICUBE, S_RS_ODSO.
3.In BEx analyzer, set type: Characteristic Values and Variable filled from authorization and value "Selection Option". Unselected "ready for input". Put the characteristic associated with group name to filter windown on the top righ hand side of the Query Designer. Also compare users in PFCG.
The question is the I still get all data about all groups. Looks like the authorization group doesn't work. I used the "execute as " and get no errors back.
Note: I didn't use "generation" to create the new authorization in Rsecadmin
Thank you very much for any answers!
HaifengI guess i have found the reason why my authorization dosen't work. I don't activate infoObjects 0TCA* and 0TCT* and infoCubes 0TCA* as well. But another thing I am confused about is :
Should I activate HR and CO businees content for authorizations 0TCA_DS02OTCA_DS05 and 0CCA_O010CCA_O03 before i get started? or should i run generation everytime i create a new authorization using Maintenance in Rsecadmin?
Haifeng -
Hi,
I have the 13-inch Mid 2007 MacBook (running 10.6.7) and recently I'm getting a ton of Kernal Panics. Rember seems to think my RAM is fine.
Any help would be appreciated. Thanks in advance,
Mr. KernelPanic
1st
Fri Apr 29 16:43:55 2011
panic(cpu 1 caller 0x2aab59): Kernel trap at 0x00bb6d03, type 14=page fault, registers:
CR0: 0x8001003b, CR2: 0x00000001, CR3: 0x09221000, CR4: 0x00000660
EAX: 0x00000001, EBX: 0xffff0000, ECX: 0x04cc3600, EDX: 0x04cc3600
CR2: 0x00000001, EBP: 0x3590b198, ESI: 0x04ce4ba4, EDI: 0x04ce4b80
EFL: 0x00010293, EIP: 0x00bb6d03, CS: 0x00000008, DS: 0x00810010
Error code: 0x00000002
Backtrace (CPU 1), Frame : Return Address (4 potential args on stack)
0x3590af38 : 0x21b510 (0x5d9514 0x3590af6c 0x223978 0x0)
0x3590af88 : 0x2aab59 (0x59aeec 0xbb6d03 0xe 0x59b0b6)
0x3590b068 : 0x2a09b8 (0x3590b080 0x0 0x3590b198 0xbb6d03)
0x3590b078 : 0xbb6d03 (0xe 0x48 0x35900010 0x80e70010)
0x3590b198 : 0x551707 (0x4cc3600 0x4ce1280 0x19 0x0)
0x3590b1e8 : 0xbb8600 (0x4ce4b80 0xbb6aa6 0x4ce1280 0x19)
0x3590b258 : 0xbad364 (0x4cc3600 0x4ce1280 0xf4240 0x4d16400)
0x3590b298 : 0xbad825 (0x4cc3600 0x4ce1280 0x0 0x109b321)
0x3590b2d8 : 0x1094511 (0x4c95500 0x4d16400 0x0 0x2a94be)
0x3590b318 : 0x1090800 (0x4d0d900 0x4c8d878 0x4d0d904 0x2a94be)
0x3590b368 : 0x10916c0 (0x4d0d800 0x4c8d878 0x3590b398 0x4d0d900)
0x3590b3b8 : 0x10962be (0x4d0d800 0x4c8d878 0x0 0xc76a56)
0x3590b418 : 0xc74a65 (0x4d0d900 0x6049e00 0xc055e68 0x0)
0x3590b478 : 0xc739f2 (0x4c9ce00 0xabcd000 0x18 0x6049e00)
0x3590b508 : 0xc744aa (0x4c9ce00 0xabcd000 0x18 0x6049e00)
0x3590b548 : 0xc769f5 (0x4c9ce00 0xabcd000 0x18 0x6049e00)
0x3590b5a8 : 0xc7367c (0x4c9ce00 0xabcd000 0x18 0x6049e00)
0x3590b5f8 : 0xc7c91f (0x4c9ce00 0x4d83400 0xabcd000 0x18)
0x3590b6a8 : 0x9117d1 (0x31661940 0x912bf8 0x3590b708 0x298086)
0x3590b768 : 0x30aff2 (0x31661940 0x0 0x4c684c4 0x29f340)
0x3590b7c8 : 0x2cd45c (0x3590b8b8 0x4dedb20 0x3590b868 0x42b7b9)
0x3590b878 : 0x42b1ef (0x4d92f38 0x3590b8b8 0x3590b8c8 0x2cbac9)
0x3590b898 : 0x2f929b (0x3590b8b8 0x0 0x1 0x6095f04)
0x3590b8c8 : 0x2d28ed (0x31661940 0x59c1a00 0x0 0x19000)
0x3590b9d8 : 0x2d3262 (0x8f40000 0x0 0x0 0x202d)
0x3590ba78 : 0x2d3330 (0x4d92158 0xc4dc000 0x0 0x8f40000)
0x3590bab8 : 0x42d4d1 (0x4d92158 0xc4dc000 0x0 0x8f40000)
0x3590bb58 : 0x2fdf34 (0x3590bb78 0x20ab4156 0x0 0x0)
0x3590bba8 : 0x474769 (0x4d92158 0x2c 0x3590be78 0x0)
0x3590bf78 : 0x4f6075 (0x50f9000 0x5572008 0x6095e44 0x1)
0x3590bfc8 : 0x2a144d (0x5572004 0x0 0x10 0x5572004)
Kernel Extensions in backtrace (with dependencies):
com.apple.iokit.IOAHCIBlockStorage(1.6.3)@0x108e000->0x10a0fff
dependency: com.apple.iokit.IOAHCIFamily(2.0.4)@0xbab000
dependency: com.apple.iokit.IOStorageFamily(1.6.2)@0xc6e000
com.apple.driver.AppleAHCIPort(2.1.5)@0xbb1000->0xbc4fff
dependency: com.apple.iokit.IOAHCIFamily(2.0.4)@0xbab000
dependency: com.apple.iokit.IOPCIFamily(2.6)@0x927000
com.apple.iokit.IOAHCIFamily(2.0.4)@0xbab000->0xbb0fff
com.apple.BootCache(31)@0x90e000->0x912fff
com.apple.iokit.IOStorageFamily(1.6.2)@0xc6e000->0xc85fff
BSD process name corresponding to current thread: warmd
Mac OS version:
10J869
Kernel version:
Darwin Kernel Version 10.7.0: Sat Jan 29 15:17:16 PST 2011; root:xnu-1504.9.37~1/RELEASE_I386
System model name: MacBook2,1 (Mac-F4208CAA)
System uptime in nanoseconds: 39509210743
unloaded kexts:
(none)
loaded kexts:
com.eltima.ElmediaPlayer.kext 1.0 - last loaded 26324557020
com.apple.driver.AppleTyMCEDriver 1.0.2d2
com.apple.filesystems.autofs 2.1.0
com.apple.driver.InternalModemSupport 2.6.2
com.apple.driver.AppleHDA 1.9.9f12
com.apple.driver.AudioAUUC 1.54
com.apple.driver.AppleLPC 1.4.12
com.apple.driver.SMCMotionSensor 3.0.0d4
com.apple.driver.AirPort.Atheros 411.19.4
com.apple.driver.AirPort.Atheros21 424.14.5
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AudioIPCDriver 1.1.6
com.apple.driver.AppleIntelYonahProfile 14
com.apple.driver.AppleIntelPenrynProfile 17
com.apple.driver.AppleIntelNehalemProfile 11
com.apple.driver.AppleIntelMeromProfile 19
com.apple.driver.ACPI_SMC_PlatformPlugin 4.5.0d5
com.apple.driver.AppleUpstreamUserClient 3.5.4
com.apple.driver.AppleMCCSControl 1.0.17
com.apple.driver.AppleIntelGMA950 6.2.6
com.apple.driver.AppleIntelIntegratedFramebuffer 6.2.6
com.apple.driver.AppleGraphicsControl 2.8.68
com.apple.driver.AppleBacklight 170.0.34
com.apple.driver.CSRHIDTransitionDriver 2.4.0f1
com.apple.driver.AppleIRController 303.8
com.apple.driver.AppleUSBTrackpad 200.3.2
com.apple.driver.AppleUSBTCKeyEventDriver 200.3.2
com.apple.driver.AppleUSBTCKeyboard 200.3.2
com.apple.driver.USBCameraFirmwareLoader 1.1.0
com.apple.iokit.SCSITaskUserClient 2.6.5
com.apple.iokit.IOAHCIBlockStorage 1.6.3
com.apple.driver.AppleUSBHub 4.1.7
com.apple.driver.AppleAHCIPort 2.1.5
com.apple.driver.AppleIntelPIIXATA 2.5.1
com.apple.driver.AppleFWOHCI 4.7.1
com.apple.BootCache 31
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.driver.AppleUSBEHCI 4.1.8
com.apple.driver.AppleUSBUHCI 4.1.5
com.apple.iokit.AppleYukon2 3.2.1b1
com.apple.driver.AppleSmartBatteryManager 160.0.0
com.apple.driver.AppleEFINVRAM 1.4.0
com.apple.driver.AppleRTC 1.3.1
com.apple.driver.AppleHPET 1.5
com.apple.driver.AppleACPIButtons 1.3.5
com.apple.driver.AppleSMBIOS 1.6
com.apple.driver.AppleACPIEC 1.3.5
com.apple.driver.AppleAPIC 1.4
com.apple.driver.AppleIntelCPUPowerManagementClient 105.13.0
com.apple.security.sandbox 1
com.apple.security.quarantine 0
com.apple.nke.applicationfirewall 2.1.11
com.apple.driver.AppleIntelCPUPowerManagement 105.13.0
com.apple.driver.AppleHDAPlatformDriver 1.9.9f12
com.apple.driver.AppleHDAHardwareConfigDriver 1.9.9f12
com.apple.driver.DspFuncLib 1.9.9f12
com.apple.driver.AppleProfileReadCounterAction 17
com.apple.iokit.IO80211Family 314.1.1
com.apple.driver.AppleProfileTimestampAction 10
com.apple.driver.AppleProfileThreadInfoAction 14
com.apple.driver.AppleProfileRegisterStateAction 10
com.apple.driver.AppleProfileKEventAction 10
com.apple.driver.AppleProfileCallstackAction 20
com.apple.iokit.IOFireWireIP 2.0.3
com.apple.iokit.IOSurface 74.2
com.apple.iokit.IOBluetoothSerialManager 2.4.0f1
com.apple.iokit.IOSerialFamily 10.0.3
com.apple.iokit.IOAudioFamily 1.8.0fc1
com.apple.kext.OSvKernDSPLib 1.3
com.apple.driver.AppleHDAController 1.9.9f12
com.apple.iokit.IOHDAFamily 1.9.9f12
com.apple.iokit.AppleProfileFamily 41
com.apple.driver.AppleSMC 3.1.0d3
com.apple.driver.IOPlatformPluginFamily 4.5.0d5
com.apple.iokit.IONDRVSupport 2.2
com.apple.iokit.IOGraphicsFamily 2.2
com.apple.driver.CSRUSBBluetoothHCIController 2.4.0f1
com.apple.driver.AppleUSBBluetoothHCIController 2.4.0f1
com.apple.iokit.IOBluetoothFamily 2.4.0f1
com.apple.driver.AppleUSBMergeNub 4.1.8
com.apple.iokit.IOUSBHIDDriver 4.1.5
com.apple.driver.AppleUSBComposite 3.9.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice 2.6.5
com.apple.iokit.IOBDStorageFamily 1.6
com.apple.iokit.IODVDStorageFamily 1.6
com.apple.iokit.IOCDStorageFamily 1.6
com.apple.driver.XsanFilter 402.1
com.apple.iokit.IOATAPIProtocolTransport 2.5.1
com.apple.iokit.IOSCSIArchitectureModelFamily 2.6.5
com.apple.iokit.IOUSBUserClient 4.1.5
com.apple.iokit.IOAHCIFamily 2.0.4
com.apple.iokit.IOATAFamily 2.5.1
com.apple.iokit.IOFireWireFamily 4.2.6
com.apple.driver.AppleFileSystemDriver 2.0
com.apple.iokit.IOUSBFamily 4.1.8
com.apple.iokit.IONetworkingFamily 1.10
com.apple.driver.AppleEFIRuntime 1.4.0
com.apple.iokit.IOHIDFamily 1.6.5
com.apple.iokit.IOSMBusFamily 1.1
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 6
com.apple.driver.DiskImages 289
com.apple.iokit.IOStorageFamily 1.6.2
com.apple.driver.AppleACPIPlatform 1.3.5
com.apple.iokit.IOPCIFamily 2.6
com.apple.iokit.IOACPIFamily 1.3.0
2nd
Fri Apr 29 20:09:16 2011
panic(cpu 0 caller 0x28f250): "pmap_flush_tlbs: pmap == kernel_pmap && flush_self != TRUE; kernel CR3: 0x100000, CPU active CR3: 0x11078000, CPU Task Map: 2"@/SourceCache/xnu/xnu-1504.9.37/osfmk/i386/pmap.c:3588
Backtrace (CPU 0), Frame : Return Address (4 potential args on stack)
0x35b3a498 : 0x21b510 (0x5d9514 0x35b3a4cc 0x223978 0x0)
0x35b3a4e8 : 0x28f250 (0x5971d0 0x100000 0x0 0x11078000)
0x35b3a558 : 0x29227c (0x84b7a0 0x2d31a000 0x0 0x0)
0x35b3a608 : 0x26b9ab (0x445db 0x0 0x84b7a0 0x2)
0x35b3a6a8 : 0x260b64 (0x6ee7564 0x0 0x0 0x1000)
0x35b3a7d8 : 0x261134 (0x2d31b000 0x0 0x0 0x0)
0x35b3a818 : 0x2831f7 (0x2341b88 0x2d31a000 0x0 0x2d31b000)
0x35b3a878 : 0x55b39f (0x2341b88 0x2d31a000 0x0 0x1000)
0x35b3a8c8 : 0x55b0a8 (0x6ee8280 0x2341ebc 0x6eeae00 0x0)
0x35b3a8e8 : 0x55ad41 (0x6eeae00 0x1 0x6eeae00 0x0)
0x35b3a908 : 0x55a360 (0x6eeae00 0x0 0x2 0x0)
0x35b3a928 : 0x504349 (0x6eeae00 0x0 0x35b3a998 0x5f61200)
0x35b3a948 : 0xe89f25 (0x6eeae00 0x5f61300 0x847e40 0x847e40)
0x35b3a998 : 0xea7907 (0x24a1b000 0x5871c00 0x5fab000 0x588be40)
0x35b3a9e8 : 0xea7ddc (0x5871c00 0x5f61300 0x3580021 0x1a)
0x35b3aa38 : 0xea824c (0x5871c00 0x5871e0c 0x5f61300 0x1)
0x35b3aa88 : 0xe90026 (0x5871c00 0x5871e0c 0x2d318000 0x1)
0x35b3aab8 : 0xe93358 (0x5871c00 0x35b3ab40 0x0 0x0)
0x35b3ab68 : 0xe90687 (0x5871c00 0x0 0x35b3abcc 0x35b3abc8)
0x35b3abe8 : 0x56a738 (0x5871c00 0x0 0x35b3ae3c 0x35b3ac74)
0x35b3ac38 : 0x56afd7 (0xeb7e40 0x5871c00 0x6345488 0x1)
0x35b3ac88 : 0x56b88b (0x5871c00 0x10 0x35b3acd0 0x0)
0x35b3ada8 : 0x285be0 (0x5871c00 0x10 0x6345488 0x1)
0x35b3be58 : 0x21d8be (0x6345460 0x70715a0 0x1fd818 0x5423)
0x35b3be98 : 0x210a3e (0x6345400 0x0 0x545d070 0x5ec4260)
0x35b3bef8 : 0x216ca1 (0x6345400 0x0 0x0 0x0)
0x35b3bf78 : 0x295168 (0x5289848 0x0 0x0 0x0)
0x35b3bfc8 : 0x2a149d (0x5289844 0x1 0x10 0x52881c0)
Kernel Extensions in backtrace (with dependencies):
com.apple.driver.AppleIntelGMA950(6.2.6)@0xe88000->0xebdfff
dependency: com.apple.iokit.IOPCIFamily(2.6)@0x927000
dependency: com.apple.iokit.IONDRVSupport(2.2)@0xbea000
dependency: com.apple.iokit.IOGraphicsFamily(2.2)@0xbc8000
BSD process name corresponding to current thread: WindowServer
Mac OS version:
10J869
Kernel version:
Darwin Kernel Version 10.7.0: Sat Jan 29 15:17:16 PST 2011; root:xnu-1504.9.37~1/RELEASE_I386
System model name: MacBook2,1 (Mac-F4208CAA)
System uptime in nanoseconds: 2235890264137
unloaded kexts:
com.apple.driver.AppleFileSystemDriver 2.0 (addr 0xc86000, size 0x12288) - last unloaded 149954847772
loaded kexts:
com.eltima.ElmediaPlayer.kext 1.0 - last loaded 23401717078
com.apple.filesystems.autofs 2.1.0
com.apple.driver.AppleHDA 1.9.9f12
com.apple.driver.AudioAUUC 1.54
com.apple.driver.AppleUpstreamUserClient 3.5.4
com.apple.driver.AppleMCCSControl 1.0.17
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AudioIPCDriver 1.1.6
com.apple.driver.AirPort.Atheros21 424.14.5
com.apple.driver.AppleIntelMeromProfile 19
com.apple.driver.ACPI_SMC_PlatformPlugin 4.5.0d5
com.apple.driver.AppleLPC 1.4.12
com.apple.driver.AppleBacklight 170.0.34
com.apple.driver.AppleIntelGMA950 6.2.6
com.apple.driver.AppleIntelIntegratedFramebuffer 6.2.6
com.apple.driver.SMCMotionSensor 3.0.0d4
com.apple.driver.AppleIRController 303.8
com.apple.driver.AppleUSBTrackpad 200.3.2
com.apple.driver.AppleUSBTCKeyEventDriver 200.3.2
com.apple.driver.AppleUSBTCKeyboard 200.3.2
com.apple.iokit.SCSITaskUserClient 2.6.5
com.apple.BootCache 31
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.iokit.IOAHCIBlockStorage 1.6.3
com.apple.driver.AppleUSBHub 4.1.7
com.apple.iokit.AppleYukon2 3.2.1b1
com.apple.driver.AppleEFINVRAM 1.4.0
com.apple.driver.AppleAHCIPort 2.1.5
com.apple.driver.AppleIntelPIIXATA 2.5.1
com.apple.driver.AppleSmartBatteryManager 160.0.0
com.apple.driver.AppleUSBEHCI 4.1.8
com.apple.driver.AppleUSBUHCI 4.1.5
com.apple.driver.AppleRTC 1.3.1
com.apple.driver.AppleFWOHCI 4.7.1
com.apple.driver.AppleHPET 1.5
com.apple.driver.AppleACPIButtons 1.3.5
com.apple.driver.AppleSMBIOS 1.6
com.apple.driver.AppleACPIEC 1.3.5
com.apple.driver.AppleAPIC 1.4
com.apple.driver.AppleIntelCPUPowerManagementClient 105.13.0
com.apple.security.sandbox 1
com.apple.security.quarantine 0
com.apple.nke.applicationfirewall 2.1.11
com.apple.driver.AppleIntelCPUPowerManagement 105.13.0
com.apple.driver.DspFuncLib 1.9.9f12
com.apple.driver.AppleProfileReadCounterAction 17
com.apple.driver.AppleProfileTimestampAction 10
com.apple.driver.AppleProfileThreadInfoAction 14
com.apple.driver.AppleProfileRegisterStateAction 10
com.apple.driver.AppleProfileKEventAction 10
com.apple.driver.AppleProfileCallstackAction 20
com.apple.iokit.IOSurface 74.2
com.apple.iokit.IOBluetoothSerialManager 2.4.0f1
com.apple.iokit.IOSerialFamily 10.0.3
com.apple.iokit.IOAudioFamily 1.8.0fc1
com.apple.kext.OSvKernDSPLib 1.3
com.apple.iokit.IOFireWireIP 2.0.3
com.apple.driver.AppleHDAController 1.9.9f12
com.apple.iokit.IOHDAFamily 1.9.9f12
com.apple.iokit.IO80211Family 314.1.1
com.apple.iokit.AppleProfileFamily 41
com.apple.driver.IOPlatformPluginFamily 4.5.0d5
com.apple.iokit.IONDRVSupport 2.2
com.apple.iokit.IOGraphicsFamily 2.2
com.apple.driver.AppleSMC 3.1.0d3
com.apple.driver.CSRUSBBluetoothHCIController 2.4.0f1
com.apple.driver.AppleUSBBluetoothHCIController 2.4.0f1
com.apple.iokit.IOBluetoothFamily 2.4.0f1
com.apple.driver.AppleUSBMergeNub 4.1.8
com.apple.iokit.IOUSBHIDDriver 4.1.5
com.apple.driver.AppleUSBComposite 3.9.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice 2.6.5
com.apple.iokit.IOBDStorageFamily 1.6
com.apple.iokit.IODVDStorageFamily 1.6
com.apple.iokit.IOCDStorageFamily 1.6
com.apple.driver.XsanFilter 402.1
com.apple.iokit.IOATAPIProtocolTransport 2.5.1
com.apple.iokit.IOSCSIArchitectureModelFamily 2.6.5
com.apple.iokit.IOUSBUserClient 4.1.5
com.apple.iokit.IONetworkingFamily 1.10
com.apple.iokit.IOAHCIFamily 2.0.4
com.apple.iokit.IOATAFamily 2.5.1
com.apple.iokit.IOUSBFamily 4.1.8
com.apple.driver.AppleEFIRuntime 1.4.0
com.apple.iokit.IOFireWireFamily 4.2.6
com.apple.iokit.IOHIDFamily 1.6.5
com.apple.iokit.IOSMBusFamily 1.1
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 6
com.apple.driver.DiskImages 289
com.apple.iokit.IOStorageFamily 1.6.2
com.apple.driver.AppleACPIPlatform 1.3.5
com.apple.iokit.IOPCIFamily 2.6
com.apple.iokit.IOACPIFamily 1.3.0Well sadly they are back....seems to occur after I put the computer to sleep. I guess it could be the HD not waking up fast enough or the memory getting corrupted while in sleep. The first KP is after waking from sleep, then I reboot and I get the 2nd KP on the login screen, then after another reboot it's ok.
KernalUser
1st
Sun May 1 13:14:59 2011
panic(cpu 0 caller 0x2aa58c): "kernel_trap(0x4b27fb4) with 64-bit state"@/SourceCache/xnu/xnu-1504.9.37/osfmk/i386/trap.c:551
Backtrace (CPU 0), Frame : Return Address (4 potential args on stack)
0x4b27e68 : 0x21b510 (0x5d9514 0x4b27e9c 0x223978 0x0)
0x4b27eb8 : 0x2aa58c (0x59adcc 0x4b27fb4 0x0 0x0)
0x4b27f98 : 0x2a09b8 (0x4b27fb4 0x0 0x0 0xbfffbce8)
0x4b27fac : 0x0 (0xf 0xb 0x0 0x10983f6)
No mapping exists for frame pointer
Backtrace terminated-invalid frame pointer 0xbfffbce8
BSD process name corresponding to current thread: Microsoft Messen
Mac OS version:
10J869
Kernel version:
Darwin Kernel Version 10.7.0: Sat Jan 29 15:17:16 PST 2011; root:xnu-1504.9.37~1/RELEASE_I386
System model name: MacBook2,1 (Mac-F4208CAA)
System uptime in nanoseconds: 5411513701152
unloaded kexts:
com.apple.filesystems.msdosfs 1.6.3 (addr 0x34763000, size 0x53248) - last unloaded 318949178054
loaded kexts:
com.apple.filesystems.autofs 2.1.0 - last loaded 258251025904
com.apple.driver.AudioAUUC 1.54
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AppleUpstreamUserClient 3.5.4
com.apple.driver.AppleIntelGMA950 6.2.6
com.apple.driver.AudioIPCDriver 1.1.6
com.apple.driver.AppleHDA 1.9.9f12
com.apple.driver.AppleMCCSControl 1.0.17
com.apple.driver.AppleIntelIntegratedFramebuffer 6.2.6
com.apple.driver.SMCMotionSensor 3.0.0d4
com.apple.iokit.AppleYukon2 3.2.1b1
com.apple.driver.AppleIntelMeromProfile 19
com.apple.driver.AirPort.Atheros21 424.14.5
com.apple.driver.ACPI_SMC_PlatformPlugin 4.5.0d5
com.apple.driver.AppleLPC 1.4.12
com.apple.driver.AppleBacklight 170.0.34
com.apple.driver.AppleUSBTrackpad 200.3.2
com.apple.driver.AppleUSBTCKeyEventDriver 200.3.2
com.apple.driver.AppleUSBTCKeyboard 200.3.2
com.apple.driver.AppleIRController 303.8
com.apple.iokit.SCSITaskUserClient 2.6.5
com.apple.iokit.IOAHCIBlockStorage 1.6.3
com.apple.BootCache 31
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.driver.AppleFWOHCI 4.7.1
com.apple.driver.AppleIntelPIIXATA 2.5.1
com.apple.driver.AppleAHCIPort 2.1.5
com.apple.driver.AppleUSBHub 4.1.7
com.apple.driver.AppleEFINVRAM 1.4.0
com.apple.driver.AppleUSBEHCI 4.1.8
com.apple.driver.AppleUSBUHCI 4.1.5
com.apple.driver.AppleRTC 1.3.1
com.apple.driver.AppleHPET 1.5
com.apple.driver.AppleSmartBatteryManager 160.0.0
com.apple.driver.AppleACPIButtons 1.3.5
com.apple.driver.AppleSMBIOS 1.6
com.apple.driver.AppleACPIEC 1.3.5
com.apple.driver.AppleAPIC 1.4
com.apple.driver.AppleIntelCPUPowerManagementClient 105.13.0
com.apple.security.sandbox 1
com.apple.security.quarantine 0
com.apple.nke.applicationfirewall 2.1.11
com.apple.driver.AppleIntelCPUPowerManagement 105.13.0
com.apple.driver.AppleProfileReadCounterAction 17
com.apple.driver.AppleProfileTimestampAction 10
com.apple.driver.AppleProfileThreadInfoAction 14
com.apple.driver.AppleProfileRegisterStateAction 10
com.apple.driver.AppleProfileKEventAction 10
com.apple.driver.AppleProfileCallstackAction 20
com.apple.iokit.IOSurface 74.2
com.apple.iokit.IOBluetoothSerialManager 2.4.0f1
com.apple.iokit.IOSerialFamily 10.0.3
com.apple.driver.DspFuncLib 1.9.9f12
com.apple.iokit.IOAudioFamily 1.8.0fc1
com.apple.kext.OSvKernDSPLib 1.3
com.apple.iokit.IOFireWireIP 2.0.3
com.apple.iokit.AppleProfileFamily 41
com.apple.driver.AppleHDAController 1.9.9f12
com.apple.iokit.IOHDAFamily 1.9.9f12
com.apple.iokit.IO80211Family 314.1.1
com.apple.iokit.IONetworkingFamily 1.10
com.apple.driver.AppleSMC 3.1.0d3
com.apple.driver.IOPlatformPluginFamily 4.5.0d5
com.apple.iokit.IONDRVSupport 2.2
com.apple.iokit.IOGraphicsFamily 2.2
com.apple.driver.CSRUSBBluetoothHCIController 2.4.0f1
com.apple.driver.AppleUSBBluetoothHCIController 2.4.0f1
com.apple.iokit.IOBluetoothFamily 2.4.0f1
com.apple.iokit.IOUSBHIDDriver 4.1.5
com.apple.driver.AppleUSBMergeNub 4.1.8
com.apple.driver.AppleUSBComposite 3.9.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice 2.6.5
com.apple.iokit.IOBDStorageFamily 1.6
com.apple.iokit.IODVDStorageFamily 1.6
com.apple.iokit.IOCDStorageFamily 1.6
com.apple.driver.XsanFilter 402.1
com.apple.iokit.IOATAPIProtocolTransport 2.5.1
com.apple.iokit.IOSCSIArchitectureModelFamily 2.6.5
com.apple.iokit.IOFireWireFamily 4.2.6
com.apple.iokit.IOATAFamily 2.5.1
com.apple.iokit.IOAHCIFamily 2.0.4
com.apple.iokit.IOUSBUserClient 4.1.5
com.apple.iokit.IOUSBFamily 4.1.8
com.apple.driver.AppleEFIRuntime 1.4.0
com.apple.iokit.IOHIDFamily 1.6.5
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.TMSafetyNet 6
com.apple.kext.AppleMatch 1.0.0d1
com.apple.driver.DiskImages 289
com.apple.iokit.IOStorageFamily 1.6.2
com.apple.driver.AppleACPIPlatform 1.3.5
com.apple.iokit.IOPCIFamily 2.6
com.apple.iokit.IOACPIFamily 1.3.0
2nd
Sun May 1 13:16:11 2011
panic(cpu 0 caller 0x2aab59): Kernel trap at 0x0027bbbd, type 14=page fault, registers:
CR0: 0x8001003b, CR2: 0x00000002, CR3: 0x0f4cc000, CR4: 0x00000660
EAX: 0x0084baa0, EBX: 0x00000002, ECX: 0x00000000, EDX: 0x00000000
CR2: 0x00000002, EBP: 0x35b138e8, ESI: 0x00000000, EDI: 0x00000000
EFL: 0x00010206, EIP: 0x0027bbbd, CS: 0x00000008, DS: 0x00000010
Error code: 0x00000000
Backtrace (CPU 0), Frame : Return Address (4 potential args on stack)
0x35b136d8 : 0x21b510 (0x5d9514 0x35b1370c 0x223978 0x0)
0x35b13728 : 0x2aab59 (0x59aeec 0x27bbbd 0xe 0x59b0b6)
0x35b13808 : 0x2a09b8 (0x35b13820 0x35b139ec 0x35b138e8 0x27bbbd)
0x35b13818 : 0x27bbbd (0xe 0x48 0x10 0x35b10010)
0x35b138e8 : 0x27cc3b (0x18a5000 0x1 0x201a8ac 0x0)
0x35b13928 : 0x258402 (0x620a818 0x0 0x0 0x3)
0x35b13a78 : 0x2aa8b6 (0x524d1ec 0x18a5000 0x1 0x3)
0x35b13b58 : 0x2a09b8 (0x35b13b70 0x246 0x35b13c88 0x2a1694)
0x35b13b68 : 0x2a1694 (0xe 0x48 0x10 0x70)
0x35b13c88 : 0x2663db (0x6187e34 0x100 0x0 0x0)
0x35b13cf8 : 0x266627 (0x0 0x406906de 0x2000 0x5555fc0)
0x35b13dc8 : 0x20e456 (0x524d1ec 0x35b13df8 0x6187e00 0x2a358d)
0x35b13e18 : 0x20ead8 (0x4f82794 0x4f827a4 0x1 0x524d1ec)
0x35b13e78 : 0x20f167 (0x4f82700 0x4a3019c 0x524d1ec 0x0)
0x35b13e98 : 0x216adf (0x4f82700 0x4a3019c 0x524d1ec 0x0)
0x35b13ef8 : 0x216df5 (0x4e35884 0x7000006 0x800 0x0)
0x35b13f78 : 0x295168 (0x5216208 0x0 0x0 0x0)
0x35b13fc8 : 0x2a149d (0x5216204 0x0 0x10 0x0)
BSD process name corresponding to current thread: coreservicesd
Mac OS version:
10J869
Kernel version:
Darwin Kernel Version 10.7.0: Sat Jan 29 15:17:16 PST 2011; root:xnu-1504.9.37~1/RELEASE_I386
System model name: MacBook2,1 (Mac-F4208CAA)
System uptime in nanoseconds: 34606644154
unloaded kexts:
(none)
loaded kexts:
com.apple.driver.AppleTyMCEDriver 1.0.2d2 - last loaded 24991548756
com.apple.driver.InternalModemSupport 2.6.2
com.apple.driver.AudioAUUC 1.54
com.apple.filesystems.autofs 2.1.0
com.apple.driver.AppleGraphicsControl 2.8.68
com.apple.driver.AppleBacklight 170.0.34
com.apple.driver.SMCMotionSensor 3.0.0d4
com.apple.driver.AppleHDA 1.9.9f12
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AudioIPCDriver 1.1.6
com.apple.driver.AirPort.Atheros 411.19.4
com.apple.driver.AirPort.Atheros21 424.14.5
com.apple.driver.AppleIntelYonahProfile 14
com.apple.driver.AppleIntelPenrynProfile 17
com.apple.driver.AppleIntelNehalemProfile 11
com.apple.driver.AppleIntelMeromProfile 19
com.apple.driver.ACPI_SMC_PlatformPlugin 4.5.0d5
com.apple.driver.AppleLPC 1.4.12
com.apple.driver.AppleUpstreamUserClient 3.5.4
com.apple.driver.AppleMCCSControl 1.0.17
com.apple.driver.AppleIntelGMA950 6.2.6
com.apple.driver.AppleIntelIntegratedFramebuffer 6.2.6
com.apple.driver.CSRHIDTransitionDriver 2.4.0f1
com.apple.driver.AppleIRController 303.8
com.apple.driver.AppleUSBTrackpad 200.3.2
com.apple.driver.AppleUSBTCKeyEventDriver 200.3.2
com.apple.driver.AppleUSBTCKeyboard 200.3.2
com.apple.driver.USBCameraFirmwareLoader 1.1.0
com.apple.iokit.SCSITaskUserClient 2.6.5
com.apple.iokit.IOAHCIBlockStorage 1.6.3
com.apple.driver.AppleUSBHub 4.1.7
com.apple.BootCache 31
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.iokit.AppleYukon2 3.2.1b1
com.apple.driver.AppleSmartBatteryManager 160.0.0
com.apple.driver.AppleAHCIPort 2.1.5
com.apple.driver.AppleIntelPIIXATA 2.5.1
com.apple.driver.AppleUSBEHCI 4.1.8
com.apple.driver.AppleUSBUHCI 4.1.5
com.apple.driver.AppleEFINVRAM 1.4.0
com.apple.driver.AppleRTC 1.3.1
com.apple.driver.AppleFWOHCI 4.7.1
com.apple.driver.AppleHPET 1.5
com.apple.driver.AppleACPIButtons 1.3.5
com.apple.driver.AppleSMBIOS 1.6
com.apple.driver.AppleACPIEC 1.3.5
com.apple.driver.AppleAPIC 1.4
com.apple.driver.AppleIntelCPUPowerManagementClient 105.13.0
com.apple.security.sandbox 1
com.apple.security.quarantine 0
com.apple.nke.applicationfirewall 2.1.11
com.apple.driver.AppleIntelCPUPowerManagement 105.13.0
com.apple.driver.AppleHDAPlatformDriver 1.9.9f12
com.apple.driver.AppleProfileReadCounterAction 17
com.apple.driver.AppleHDAHardwareConfigDriver 1.9.9f12
com.apple.driver.AppleProfileTimestampAction 10
com.apple.driver.AppleProfileThreadInfoAction 14
com.apple.driver.AppleProfileRegisterStateAction 10
com.apple.driver.AppleProfileKEventAction 10
com.apple.driver.AppleProfileCallstackAction 20
com.apple.iokit.IOFireWireIP 2.0.3
com.apple.driver.DspFuncLib 1.9.9f12
com.apple.iokit.IOSurface 74.2
com.apple.iokit.IOBluetoothSerialManager 2.4.0f1
com.apple.iokit.IOSerialFamily 10.0.3
com.apple.iokit.IOAudioFamily 1.8.0fc1
com.apple.kext.OSvKernDSPLib 1.3
com.apple.iokit.IO80211Family 314.1.1
com.apple.driver.AppleHDAController 1.9.9f12
com.apple.iokit.IOHDAFamily 1.9.9f12
com.apple.iokit.AppleProfileFamily 41
com.apple.driver.AppleSMC 3.1.0d3
com.apple.driver.IOPlatformPluginFamily 4.5.0d5
com.apple.iokit.IONDRVSupport 2.2
com.apple.iokit.IOGraphicsFamily 2.2
com.apple.driver.CSRUSBBluetoothHCIController 2.4.0f1
com.apple.driver.AppleUSBBluetoothHCIController 2.4.0f1
com.apple.iokit.IOBluetoothFamily 2.4.0f1
com.apple.driver.AppleUSBMergeNub 4.1.8
com.apple.iokit.IOUSBHIDDriver 4.1.5
com.apple.driver.AppleUSBComposite 3.9.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice 2.6.5
com.apple.iokit.IOBDStorageFamily 1.6
com.apple.iokit.IODVDStorageFamily 1.6
com.apple.iokit.IOCDStorageFamily 1.6
com.apple.driver.XsanFilter 402.1
com.apple.iokit.IOATAPIProtocolTransport 2.5.1
com.apple.iokit.IOSCSIArchitectureModelFamily 2.6.5
com.apple.iokit.IOUSBUserClient 4.1.5
com.apple.driver.AppleFileSystemDriver 2.0
com.apple.iokit.IONetworkingFamily 1.10
com.apple.iokit.IOAHCIFamily 2.0.4
com.apple.iokit.IOATAFamily 2.5.1
com.apple.iokit.IOUSBFamily 4.1.8
com.apple.driver.AppleEFIRuntime 1.4.0
com.apple.iokit.IOFireWireFamily 4.2.6
com.apple.iokit.IOHIDFamily 1.6.5
com.apple.iokit.IOSMBusFamily 1.1
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 6
com.apple.driver.DiskImages 289
com.apple.iokit.IOStorageFamily 1.6.2
com.apple.driver.AppleACPIPlatform 1.3.5
com.apple.iokit.IOPCIFamily 2.6
com.apple.iokit.IOACPIFamily 1.3.0 -
Need Analysis of my iPAD Network Application and Github System Monitor
iPad System Partial Information captured by Fingbox image link below
http://postimg.org/image/isn9r0owz/
http://postimg.org/image/e5cmbic6b/
http://s13.postimg.org/6o3ewamnb/image.jpg
GitHub Network Captured (System monitor ultimate application) image link below
http://s3.postimg.org/v6lenby9v/image.jpg
http://s3.postimg.org/k4gbow477/image.jpg
http://s3.postimg.org/69i16f9s3/image.jpg
http://s3.postimg.org/ikfl48l6r/image.jpg
Note: I don't use ddns nor remote applications.
Gateway Router: hitron cgn2-Rog configured with opendns.Hello,
EXCLUDE=SCHEMA:"IN ('SYS','SYSTEM','OUTLN','PS','SYSADM','DBSNMP','PEOPLE','DIP','ORACLE_OCM','CSMIG','PSMON','PERFSTAT'"It seems that it lacks the right parenthesis on the above syntax.
According to the Note *1133013.1* of My Oracle Support, a wrong syntax of the EXCLUDE parameter may cause the error ORA-39126: Worker unexpected fatal error in KUPW$WORKER.GET_TABLE_DATA_OBJECTS* if you use IMPDB with a Network Link.
So you may correct the EXCLUDE parameter and try again.
Hope this help.
Best regards,
Jean-Valentin -
Analysis Authorization with SEM-BPS
Hi,
We have performed technical upgrade from BW 3.5 to BI 7.0. We want to migrate to BI 7.0 functionality phase wise.
We have SEM-BPS and now we want to migrate to Analysis Authorization of BI 7.0.
Once we have igrated to Analysis Authorization, will there be any impact on SEM-BPS? Can we still use SEM-BPS with New Analysis Authorizations? We do not want to move to BI-IP in near future?.
Please advise.
Best Regards,
URDear UR,
Iu2019m going to try helping you,
In difference of reporting functionality, in planning, the data of an InfoCube is not just read; it is also changed or created.
There are two planning tools in BI: BW-BPS (Business Planning and Simulation), and BI Integrated Planning.
There are two main tcode: BPS0 and RSPLAN
There are three authorization objects to manage Integrated Planning:
S_RS_PL_ADMIN - Planning Administrator
S_RS_PL_PLANNER u2013 Planner
S_RS_PL_PLANMOD_D u2013 Planning Modeler (Development System)
The main object in the planning scenario is InfoCube real-time, where can available writing in small package that arrive in parallel. In some cases the security requirements for reporting and planning can be merging. In this case you need authorization object for checking planning, as authorization object above, and you need authorization object for using a query for planning requires as S_RS_COMP.
In addition to authorization for displaying data, the authorizations for changing data you need analysis authorization (the analysis authorization focus in the InfoProvider, no in Aggregation Level).
In your analysis authorization design for reporting stuff, you should use in 0TCAACTVT characteristic 03 value. In the planning stuff, you should use in 0TCAACTVT characteristic 03 and 02 values. As explain following:
Using the characteristics 0TCAACTVT (activity), you can restrict the authorization to different activities. Read (03) is set as the default activity; you must also assign the activity Change (02) for integrated planning.
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/b1/0c9441b8972e7be10000000a1550b0/frameset.htm
I hope this suggestion can help you answer question,
Luis -
How to check the analysis of material determination in sales order
hi,
We are trying to create a sale order with material determination. Material determination analysis is on. After switching this on while adding a new line item, in an existing sales order, we are able to do analysis as the system itself takes us to analysis screen. But once the document is saved, we need analysis to be done at material determination for the determined materials , something similar to pricing or account determination analysis.Please help
Regards,
Aparna.Hi,
If you drag the line item a little towards the right side, you will find a filed material entered. The one you see in the material filed on sales order over view screen is the one determined. You can as well double click and see the fields material entered and material determined.
Is there anything else you are expecting to see as part of analysis ?
Regards
Sadhu Kishore -
Raw material stock report with vendor wise
Dear all ,
Can any one tell me , How do I get stock report only on " VENDOR " wise .
The purpose is , I've multiple souces for one Material , I need analyse the available inventory with vendor wise.
Pl.s help
Thanks in Advance
SekharHi,
1. Once you receive the mateiral inside the plant the identity of vendor is lost.
2. All the stock will get as Plant / Sloc Stock only.
3. Incase if you need vendor wise stock then you need to activate batch management, with Classification view and one characteristics as vendor.
4. And during each GR you need to enter the vendor value
Else you will not be able to seggregate the available stock vendor wise.
reg
dsk -
SQL Server 2012 PowerView & PoverPivot in combination with SharePoint 2013
Hi,
I have been reading articles on the internet about this, and I am little bit confused. I understand this is also changed since in SP2013. Could someone with experience clarify.
1. It looks like Power View has become a part of Reporting Services and can not be installed without Reporting Services, is this correct? If this is true, then what is this
http://www.microsoft.com/en-us/download/details.aspx?id=35577 If not, why do I see a lot of links referring to PowerView as a part of Reporting Services? for example
http://www.codeproject.com/Articles/615462/Configure-Power-View-Reporting-Services-Features-o
2. Do I need Analysis Services in order to use PowerView, is other words is Analysis Services a requirement?
3. Where do I run the SQL Server 2012 Setup? I was assuming that I need to run it on SharePoint in order to add and register dll's on the SP servers, they are needed in order to create Service Applications (PowerView & PoverPivot). However in pictures
on the
http://www.codeproject.com/Articles/615462/Configure-Power-View-Reporting-Services-Features-o link I see they are adding features to SQL instance. So do we run it on SharePoint or SQL server? If we run it on SharePoint server, what to do with instance name?
If on SQL server, how will SharePoint server get dll's in order to create Service Applications?
4. Can SQL 2008 be used for PowerView & PoverPivot configuration databases? I mean a scenario when SharePoint has 2012 versions of PowerView & PoverPivot DLLs (i.e. PowerView & PoverPivot Service Applications created
with SQL2012 version), but configuration databases itself for these applications are in SQL 2008? I know that such a scenario was supported with SSRS on SP2010(you could simply run the SQL2012 setup on SP server and add SQL2012 SSRS, later when you configure
SSRS in SharePoint mode SQL 2008 database could be used as a SSRS configuration database)...
Thanks in advance!
Tofig1. Part of the confusion comes from the fact that there are several versions of powerview: powerview for SharePoint and PowerView for Excel. But yes, for SharePoint integration it's part of SSRS. (If you're not talking about SharePoint, then you can create
and use PowerView in Excel. No SSRS or SharePoint required. But, the link you provided is for PowerPivot for SharePoint. This provides additional functionality for folks that want to surface PowerPivot workbooks in SharePoint. (which is different than PowerView).
(PowerPivot = tabular data mode in excel = the ability to create pivottables/charts with millions of rows of data in Excel with jaw dropping performance (sorry for the advertising speak, but in my experience, it's true). PowerView = the ability to create
dashboards / eye candy / other neat visualizations like maps for data that is stored in a tabular data model (PowerPivot or SSAS in tabular mode)).
2. No. PowerView was originally designed to use "tabular data models" as their source of data. There are two ways to create a tabular data model: An SSAS instance in tabular mode, or an Excel Workbook with a powerPivot data model (PowerPivot is the excel
version of the tabular data model). So, if you have a workbook that has data loaded in through PowerPivot, you can create a PowerView report in that workbook and surface it with excel services, with no SSAS needed.
3. On a SharePoint box. The only way to install SSRS in SharePoint integrated mode is to install SSRS on a SharePoint WFE. (The databases they use will go on the SQL box, but the bits for SSRS go on the SharePoint box)
4. According to the following doc, SharePoint 2013 only supports SSRS 2012 SP1 (which means only SQL 2012):
http://msdn.microsoft.com/en-us/library/gg492257.aspx
Mike G. -
GR Doc# and GR Line Item Number
Hi All,
We have custom defined infocube actually WM-stocks.Now our requirement is to add GR Number and GR line Item Number. can be these be added to Infocube or should we go for ODS? any help from experts?
Data has been loaded from generic datasource which is based on LQUA table.
regardsHi,
We implemented just the opposite:
A cube for line items, an ODS for header data which didn't went to the cube (I mean those data that cannot be calculated by summing up item data).
If we need summary data from ODS, we use RRI.
Everything depends on a level of details you need. In our case we needed analysis on item data.
Best regards,
Eugene
Message was edited by: Eugene Khusainov -
Peoplesoft HCM Interface with SAP?
We planned to implement the SAP HR module, together with the SAP EAM, SAP SCM and SAP FI in a project that was supposed to Go-Live last year.
The HR Dept was using Peoplesoft HCM previously.
The project never went live and the project has now decided to implement SAP EAM, SCM and FI but retain Peoplesoft HCM in HR.
On which modules in SAP would Peoplesoft HCM normally interface?
Thanks in advance.Hi lina.
chk these links
http://www.oracle.com/applications/peoplesoft/hcm/ent/PeopleSoft%20or%20SAP_%20Choosing%20The%20Best%20HCM%20Suite.pdf
http://www.oracle.com/applications/peoplesoft/hcm/ent/Weighing%20Your%20Options%20For%20HCM%20Executive%20Summary.pdf
for hcm implementation u should interface with
BNA (business needs analysis);
BPR (business process review);
GAP analysis (identify essential customizations and work arounds);
Gathering and reworking client data for input into the system;
Training of Super Users (sometimes end users also);
JAD workshops with super users;
Functional specs for customizations and reports;
Setup of system;
Testing system, any changes, customizations and reports;
Creation of CRP (conference room pilot) to demonstrate system to client;
HR project documentation;
Responsible for sign off of HR documentation by client;
Writing training manuals;
Responsible for delivery of a working system to client requirements;
Initial support after go live.
thanks
karthik
reward me ifusefull -
hi Team,
We have XI 7.0 running and 6 hours back we had experienced slowness in message processing.
But over period of time, the overall performance back to normal. So now i need analysis why there was slowness in message processing. Please help me with some quick tips to find the reasons for the same.
We have Wily Introscope, SMD, in our environment.
Thanks
SekharHi,
a reason could be a statistic job that is running on DB level (not sure on which DB you are - Oracle, SQL, ...). While such a job runs and scans SXMSPMAST, SXMSPMAST2, SXMSCLUR, SXMSCLUR2, SXMSCLUP, SXMSCLUP2, ... message processing nearly stops and definetely slows down because inserting in those tables is temporarly constrained.
Regards,
Kai -
For the last few years, I have been helping out friends with wedding and party invitations. I would like to start doing this on a bit bigger scale now that I am a stay-at-home mom with our new baby. I currently have a run of the mill HP inkjet printer that has a hard time handling cardstock over 110 lbs. I also have a problem with drying time and smearing when it comes to printing on smooth paper like shimmer paper or vellum. So, I thought maybe a laser printer was the way to go, but I see they only use paper specific for them. With that in mind, can anyone recommend a good printer that will handle cardstock greater than 110 lb.? The last invites I did used 150 lb. cardstock. Thanks!
Hello pennsylvaniakat,
Welcome to the HP Consumer Printer Forums.
I think your best chance to find the answer you are looking for would be to call 1 (888) 999-4747. They can do a "needs analysis" for you and direct you to the right product.
Alternatively, you can visit HERE to check out what is available.
If I have helped in any way, just click the Kudos star on the left. Also, if your issue has been resolved, don't forget to select Accept as Solution -
Workflow Task Returned to Inbox
Hi Team,
We have a issue where a Workflow has been completed for a request and status is shown as 120 Completed but one of the task came back to user INBOX after 4 months ehich is in ready status.
We have checked workflow log for that particuler task and status is completed, but when we execute same task through his Inbox and go to workflow log it shows that task in Ready status.
Can you provide some input.
Regards,
Rahul Maglani
9900156590Hello Rahul
For answer to your question need analyse workflow's schema and desctiption all rules
Ta the some cases one or some records was return toworkflow's launcher or owner
Regards
Kanstantsin
Maybe you are looking for
-
Can I use USB thumbdrive instead of DVD for general upgrade purposes
I have this guy: Model Family: Mac mini G4 Processor: 1.25GHz G4 (PowerPC 7457) Manufacturer: Motorola # of CPUs: 1 Codename: Apollo 7 Base Memory: 256MB PC2700 DIMM 512MB PC2700 DIMM Max Memory: 1024MB # Memory Slots: 1 Brand: Apple Wireless: Option
-
I need yo find my iPod I lost it and Im usin an iPhone and I saw pictures from my iPod cuz I have my acount in both devices and stream in my iPod irse on so I just want how I can find this person
-
R/3 APO Integration: Enhanced Fields not transferred
Hi, My requirement is when I change the value of an enhanced field in a material in MM02 in R/3, the change should be reflected in the corresponding product in APO. I want to enhance the Material Master in R/3 and APO with a Z field. I have done this
-
Insert at BWF Time Offset - Not working!
I have some broadcast wave files generated with Cubase 5, and they definitely have BWF time offset. I can see it in File Info. When I select the option to Use BWF Time Reference Offset, and then attempt to insert the file, it just inserts at the curs
-
Off set for component requirement in PM order
Dear Experts, In my PM order, offset date for component requirement date is working only for the first component. for the next component it is taking basic start date( i e order generated date by default) as the requirement date even though i entere