Need Applying Note 1422843 steps for my SAP system

Hello,
My company have an SAP netweaver 7.0 and when i check in system status sub-window and disp+work i got 221 level patch of the kernel and non unicode system, i read the note 1422843 and i want to apply it but i need a confirmation of steps i have to run following the note : 
1-i use SE38 to create a report in the package SPOO with the name RSPO2010, in the header of that report i past the text from
the note in the "Seletion texts". 
2-I apply the note via transaction snote then i run that report 
3- I update the kernel with the suitable (bellow) patch attached obtained from the part SP Patch Level of the same note : 
SAP KERNEL 7.00 64-BIT SP238 000238
4- i restart the SAP system.
The note link : https://websmp230.sap-ag.de/sap(bD1mciZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=1422843#PL
thank you for your help.

Hello,
About The point 4 (
Apply the latest kernel patch level 236, and then apply disp+work patch level 244 (the latest).
), when i follow the download link of kernel patch suitable to my release (SAP KERNEL 7.00 64-BIT) in the note 1425811 (related to the note 1422843) i have two choices with different packages :
1) SAP KERNEL 7.00 64-BIT -> AIX 64bit -> #Database independent, this list offers this packages :
          A)      SAPEXE_236-20001020.SAR   Kernel Part I (for Basis 7.00)
          B) dw_239-20001020.sar   disp+work package
          C)      dw_245-20001020.sar   disp+work package
2) SAP KERNEL 7.00 64-BIT -> AIX 64bit -> ORACLE, this list offers this packages :
          A)       SAPEXEDB_236-20001021.SAR   Kernel Part II (for Basis 7.00)
Please i need to know What packages to apply? and i need to understand while the note refers only to the kernel patch how did you know that the disp+work package also must be applied?
Edited by: NetMed on Mar 6, 2010 9:49 PM

Similar Messages

SAP Webdispatcher for multiple SAP systems

Hello friends,
I need some info on SAP web dispatcher configuration for mutliple SAP Systems (different SIDs).
Is it require to install & configure multiple web dispatchers for mutliple SAP Systems (different SIDs)? If it so, what would be the steps and provied me some links
regards
Anand.M

> ... what would be the steps and provied me some links
This you can do on your own, using the search --> then ask more detailed questions.
> Total Questions: 6 (6 unresolved)
This you should also do on your own --> Follow up on questions you have asked.
Please read the forum rules if you have not done so yet.
Cheers,
Julius

Could not allocate space for object temporary system object: ... in database 'tempdb' because the 'PRIMARY' filegroup is full.

Using SQL Server 2008 R2. Tempdb resides on disks W and X
both of those are 250 GB each. Nothing else resides on these disks. The recovery mode for tempdb is set to Simple and is split in 8 files and one log file. Each of the tempdb file is set for auto growth by 128 MB and max size is unlimited. The log file is
set for auto growth by 10% and max size unlimited.
I get the following error at least once a week while running an ETL:
[SQLSTATE 01003] (Message 8153) Could not allocate space for object '<temporary system object: 335532118192937>' in database 'tempdb' because the 'PRIMARY' filegroup is full. Create disk space by deleting unneeded files, dropping objects in the filegroup,
adding additional files to the filegroup, or setting autogrowth on for existing files in the filegroup. [SQLSTATE 42000] (Error 50000). The step failed.
I have to then shrink the tempdb log and files to create space on the disks.
What is a permanent solution to this problem, I don't want my ETL to break due to TempDB diskspace full.
Thanks in advance.

Hi,
Permanent solution would be finding out query which is causing tempdb log file to grow out of proportion and fill it and I would like you to take help of below article
Troubleshooting out of space issue in Tempdb
Please change Autogrowth value for Log file from 10 % to may be 100 M. This is just a tentative value you need to study
growth of tempdb to reach to correct value. You kept 128 MB autogrowth for tempdb data file is this value tentative or you just put it.
Below article can be referred for tempdb details
Working with tempdb
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it.
My TechNet Wiki Articles

Installing data quality management for sap for multiple sap system

Hello folks,
I have an Requirement where i need to install data quality management for sap in multiple sap system.
I have installed it successfully for one system .
here my data services is installed in one server with rfc server as windows services in same server.
i have done the required configuration in ecc side.
my question is how do i use same data services jobs which are configured as real time services for both my sap connection?
in simple terms how do i installed dqm for multiple sap system having single data services server.
thanks,
Shubhangi.

Hi Vishal,
Regarding DQM Please refer the below Link.
Links:
http://scn.sap.com/community/data-services/blog/2013/07/18/i-installed-dqm-for-sap-you-can-too
or you can also refer below SNotes given by SAP:
1732816 - How to manually import DQM ATL files correctly after failed install
Note 1732816 - DQM Adapter Dataflow installer fails on Data Services 4.1
Links:
https://service.sap.com/sap/support/notes/1732816
Thanks,
Daya

Error "codepage could not be determined for the receiver-system"

Hi,
we use the idoc-adapter to send message from mySAP ERP to PI.
All worked fine.
So, this morning I have changed the datatype of the messageId from "char" to "int" in mySAP ERP in the customizing menue (install param). So, no message received in SAP PI.
When I start transction "we05" in mySAPERP" I get the following error:
"codepage could not be determined for the receiver-system" status 02.
I have changed the datatyp to "char" but the same probleme
Can anybody help me please?
Regards
Stefan

This error shouldn't occur unless there is some modification at the OS level codepages.
Please check the entried in the RFC destination for connecting to the XI system. Unicode settings.
Regards,
Prateek

Solution Manager System Monitoring for non SAP system

Dear Support,
I have configured the CCMS Agent (SAPCCMSR) for non-SAP system (Windows 2008R2).
The system information (e.g. CPU, Memory, Disks etc) has already showed in RZ20 of Central Monitoring system (e.g. Solution Manager).
How can I do to configure to display these information in the Alert Inbox tab on System Monitoring Workcenter?
Best regards,
Fan Hung

Hi,
Have you defined and added corresponding logical systems for the respective satellite systems?
Here is the sequence of steps you've to do:
in SMSY:
1) Define server, DB, Systems
2) Generate READ, TMW, TRUSTED RFCs to the satellite systems
3) define logical systems and assign the satellite system to it
in Solution_Manager:
1) define new solution
2) add the logical system into the solution
If these steps are successful, you should be able to see the satellite system in SYSTEM MONITORING in Solution_Manager.
Have you already done these steps?
After performing these steps:
Solution_Manager>choose relevant solution>operations setup>Solution Monitoring>System monitoring>Activate monitoring> choose the system and activate monitoring.
Your system will then appear.
Does this help any way?

Could not start instance 'JC00' of SAP system SUN.

error in installation of Netweaver 2004 SP1 on AIX. Please Help.
ERROR 2007-03-29 00:29:28
CJS-20022 Could not start instance 'JC00' of SAP system SUN.
Contains of sapinst.log =>
00:29:20 29.03.2007 LOG: Effective User Id is root
This is Saposcol Version COLL 20.87 640 - AIX v4.20 5L-64 bit 040309
Usage: saposcol -l: Start OS Collector
 saposcol -k: Stop OS Collector
 saposcol -d: OS Collector Dialog Mode
 saposcol -s: OS Collector Status
Starting collector (create new process)
could not move /usr/sap/tmp/dev_coll to /usr/sap/tmp/dev_coll.old
saposcol on host ctsaix02 started
Running /usr/sap/SUN/SYS/exe/run/startj2eedb
Trying to start database ...
Log file: /home/sunadm/startj2eedb.log
/usr/sap/SUN/SYS/exe/run/startj2eedb[113]: dbmcli: not found.
/usr/sap/SUN/SYS/exe/run/startj2eedb[116]: dbmcli: not found.
Wrong or unsupported SAP DB software installation
DB startup failed
ERROR 2007-03-29 00:29:28
CJS-20022 Could not start instance 'JC00' of SAP system SUN.
/home/sunadm/startj2eedb.log=>
Thu Mar 29 10:34:28 CST 2007
LOGFILE FOR STARTING DATABASE
Trying to start database ...
Thu Mar 29 10:34:28 CST 2007
Checking required environment variables
SAPSYSTEMNAME is >SUN<
Start database with xuserkey >c_J2EE<
Thu Mar 29 10:34:28 CST 2007
Connect to the database to check the database state
dbmcli: connect check finished with return code: 0
Database not available
Thu Mar 29 10:34:28 CST 2007
Starting XServer
Wrong or unsupported SAP DB software installation
~
Message was edited by:
 login
Message was edited by:
 login

/local/install_sap=>
start_SUN_JC00.log=>
Starting SAP-Collector Daemon
10:55:42 29.03.2007 LOG: Effective User Id is root
This is Saposcol Version COLL 20.87 640 - AIX v4.20 5L-64 bit 040309
Usage: saposcol -l: Start OS Collector
 saposcol -k: Stop OS Collector
 saposcol -d: OS Collector Dialog Mode
 saposcol -s: OS Collector Status
The OS Collector (PID 401408) is already running .....
saposcol already running
Running /usr/sap/SUN/SYS/exe/run/startj2eedb
Trying to start database ...
Log file: /home/sunadm/startj2eedb.log
/usr/sap/SUN/SYS/exe/run/startj2eedb[113]: dbmcli: not found.
/usr/sap/SUN/SYS/exe/run/startj2eedb[116]: dbmcli: not found.
Wrong or unsupported SAP DB software installation
DB startup failed

An RFC destination could not be specified for the logical system

Hello Experts,
I am trying post goods receipt in EWM system in a simple inbound delivery process. It is not getting posted back in ECC. I have my RFC connection setup properly(I assume since I was able to transfer inbound delivery to EWM in first place).It seems some setting related to Outbound queue in EWM is missing.Can anyone tell me in detail what settings are required?Is it something to do with WE20 transaction?I am not sure what settings should be done there.The error log is as below-
An RFC destination could not be specified for the logical system
SB3CLNT011
Message No. B1550
Diagnosis
An RFC destination should be specified for the logical system SB3CLNT011.
This could not be done in this case. SB3CLNT011 is not your local logical system
and this system is not included in the relevant Customizing tables.
Procedure
Check:
RFC
destination
Port
definitions
oubound partner profile of
message type SYNCH for this logical system
Regards,
Khushboo

Hi Oritra and Suraj,
I have checked remote connection in SM59 for both the logical system.It works fine.I understand this is more of a technical issue,but I don't have A local basis team to help me so reaching out to experts here.Can you guide me what technical settings could be checked for EWM-->ECC connection?When I execute BD82 for SB3CLNT011 it shows me green status with message "No messages have been defined for the selection conditions in the model".
Although when I do this for EWM logical system SB3CLNT012 it shows me this with all green status-
System SB3CLNT011 as a partner type already exists
System SB3CLNT012 as a partner type already exists
Port A000000018 with RFC destination SB3CLNT011 already exists
Outbound parameters for message type SHP_IBDLV_CHANGE SHP_IBDLV_CHANGE01 already
Outbound parameters for message type SHP_IBDLV_SAVE_REPLICA SHP_IBDLV_SAVE_REPLI
Outbound parameters for message type SYNCH SYNCHRON already exist
Am I missing something in WE20?
Regards,
Khushboo

HT1206 I need a work iTunes account for my work system, but used my work email address as an associated email to my personal iTunes account. Now I can't use the work email to create the new iTunes account. how do I remove the email from my personal accou

Since I upgraded to Mavericks from Snow Leopard I need a work iTunes account for my work system, but used my work email address as an associated email to my personal iTunes account.
Now I can't use the work email to create the new iTunes account. how do I remove the email from my personal account?

You can long into an account via this page and update the email addresses that you have on it : http://appleid.apple.com

'Error Occured in the Source System' for Non SAP system

Hi Gurus,
We have an Info Package which is getting the data from the Source System 'DOCP' and it has failed due to 'Error Occured in the Source System'.Since the source system is Non SAP system there is no option 'Replicate Data Sources'.So,First I activated the transfer rules by the program and ran the package again .But again the same error occured.
Please suggest me how to proceed for this error for Non SAP Systems?

Hi,
Check the RFC connection in SM59 and reactivate the source system again.
Hope this helps..
Thank you,
S R.

Common content server for 2 SAP systems

Hello Friends,
We have configured a common content server for 2 SAP systems, say A & B using oac0 and csadmin, have set 2 content rep C1 for A & C2 for B resp. Please let me know if this is fine?
other thing is when i go to t-code csadmin on both the systems, for A - C2 displays customizing missing and for B - C1 displays customizing missing.but the systems are running fine and we are able to checkin documents
please let me know why it shows customizing missing?
Regards
Surjit

Hi,
The customizing missing message is due to 2 different SAP system. Means when you activate the content server thru CSADMIN the certificate is used only one. Right! Now physical systems are two so in both the cases it will show one as customizing missing because no physical rep available for missing one. But these will work at it's own level fine because the one is available as a physical rep in each case.
Hope this will resolve the query.
Regards,
Ravindra

Need an IDOC EDI STEPS for material document(MB03)

HI ALL,
i need an IDOC for material document. For example, user in SAP make material document (t-code MIGO or MB11), then automatical is downloading outbound IDOC, which contain information about material document.HOW TO PROCESS IT THROUGH EDI .GIVE THE STEPS.

like below you can do your settings
The EDI Configuration required to be done for Transfering IDoc to non SAP System is.
1. First of all, we need to identify the Transaction Data which is required to be Transfered to external System.(Ex: Sales Order Data or Shipment Data or Delivery Related Data).
2. Secondly, Identify the IDoc Type & Message Type. IDoc Type can be found in Transaction WE30 & Message Type Can be explored in Transaction WE81.
3. After that, assign the IDoc Type to Message Type in WE82.
4. Identify the Selection Program (Outbound) which is generally a Function Module in the Form of IDOC_OUTPUT_<Message Type>. Example, if the Message Type is ORDERS, the FM will be IDOC_OUTPUT_ORDERS.
5. Assign the Function Module to a Process Code in WE41 (Process Code for Outbound).
6. Configure Port Definitions in WE21 for which the RFC destinations are to be maintained in Transaction SM59.
7. Maintain Partner Profiles for the Outbound Message Processing in WE20.
8. Last, but not the Least, we need to Focus Mainly on Message Control Configuration which is nothing but maintaining the Output Type for the Outbound IDoc to be Triggered for the Sales Order Application or Delivery Application.
i. In Message Control Configuration, we'll maintain
a. Condition Tables
b. Access Sequences
c. Output Types
ii. To Create the above elements, we can go to SPRO Transaction and do the same depending on the Application Area such as Sales / Shipping / Logistics Execution etc.
iii. For Output Types & Access Sequences, we can go to the Transaction NACE or VK01 in which we'll maintain the Output Types / Access Sequences & Condition Records.
Please note that all the above steps may not be needed if we are using some of the Standard Elements provided by SAP such as Message Type, Process Code, IDoc Type & Selection Program as many of the Standard SAP Applications have their own Elements for different Application Areas.
For example, if you want to send an Order Confirmation IDoc when the Sales Order is saved, you can use the Message Type ORDRSP, IDoc Type ORDERS05 & Selection Program as IDOC_OUTPUT_ORDRSP.
However, Message Control Configuration is the Key Factor and is required for all the Applications as per the Customer's / Client's Requirements.

Need Message Type Creation Steps for Different Scenarios

Hi Friends,
I have done following steps for Outbound IDoc [Extended IDoc]
1. Create custom Message Type                           WE81
2. Create custom Segments               WE31
3. Create IDoc Extension               WE30
4. Create IDoc Type [Basic+Extu2019n]          WE30
5. Link Custom IDoc with Message Type          WE82
6. Activate CP for Custom Message Type                     BD50
7. Activate Change Pointers globally Flag on     BD61
8. Maintain custom message type in CDM                     BD64
9. Define partner profile for custom msgtype                    WE20
After completion of the above steps.
I am unable to do the following steps.
10. Checking the IDoc Creation                          BD10
          or
11. Execute CP IDoc generation Program     RBDMIDOC
Here these steps I am unable to find Message Type.
If we create message type thru BD53 [std idoc] it will come.
but my situation is for extended IDoc I need to create message type.
If any one worked on this situation Help me out.
Regards,
Mutyapu4u.
Edited by: naveen mutyapu on Jun 24, 2008 2:51 PM

Hi,
Check the link below:
http://www.****************/Tutorials/ALE/ALEMainPage.htm
Hope this helps..
Regards,
Sharath

Configuration needed for non-SAP system as Idoc sender

Hi,
We have a need to connect a non-SAP system which is sending an Idoc to XI. I understand that on the sender side, we need to create a tRFC port from the sender system with the server address of the Integration as the target host?
My question is on the PI side, are the configurations the same as a SAP system, i.e. maintaining the port in IDX1 and getting the metadata in IDX2 or will it be different?

In PI, you will need to create a port in IDX1 with the same port name as the Idoc control record when the Idoc comes from the non SAP system.
As you cannot load the Idoc metdata from your actual source, you will need to copy the Idoc metadata from a actual SAP system or from the port of another SAP system in IDX2
Also, in the Business Service / System, make sure that the logical system name is maintained as per the Idoc control record of the source.
Regards
Bhavesh

SAP system not starting or not able to logon to SAP system

Hi All,
Our OS is AIX5.3
DB is Oracle 10.2
And the machine is in cluster for HA. Cluster is running fine.
I am starting SAP using startsap all, the command shows that database and all instances have been started successfully. But we are not able to logon to the system.
Following is the output of startsap command and dpmon command :
bash-3.00$ startsap all
Checking ARP Database
ABAP Database is not available via R3trans
Starting SAP-Collector Daemon
14:45:38 11.10.2008 LOG: Effective User Id is root
This is Saposcol Version COLL 20.95 700 - AIX v11.15 5L-64 bit 080317
Usage: saposcol -l: Start OS Collector
 saposcol -k: Stop OS Collector
 saposcol -d: OS Collector Dialog Mode
 saposcol -s: OS Collector Status
The OS Collector (PID 286752) is already running .....
saposcol already running
Running /usr/sap/ARP/SYS/exe/run/startdb
Trying to start ARP database ...
Log file: /home/arpadm/startdb.log
ARP database started
/usr/sap/ARP/SYS/exe/run/startdb completed successfully
Starting SAP Instance ASCS00
Startup-Log is written to /home/arpadm/startsap_ASCS00.log
Instance Service on host sapprodail started
Instance on host sapprodail started
Starting SAP Instance DVEBMGS01
Startup-Log is written to /home/arpadm/startsap_DVEBMGS01.log
Instance Service on host sapprodail started
Instance on host sapprodail started
bash-3.00$
bash-3.00$ dpmon
dpmon=>sapparam(1c): No Profile used.
dpmon=>sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
DpMonInit failed - possibly no dispatcher running
DpMon: External/Internal dplib version: 110/237
bash-3.00$
Developer trace out put is as follows
trc file: "dev_disp.new", trc level: 1, release: "700"
sysno 01
sid ARP
systemid 324 (IBM RS/6000 with AIX)
relno 7000
patchlevel 0
patchno 159
intno 20050900
make: single threaded, Unicode, 64 bit, optimized
pid 295220
Sat Oct 11 14:46:22 2008
kernel runs with dp version 237000(ext=110000) (@(#) DPLIB-INT-VERSION-237000-UC)
length of sys_adm_ext is 576 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (01 295220) [dpxxdisp.c 1254]
 shared lib "dw_xml.so" version 159 successfully loaded
 shared lib "dw_xtc.so" version 159 successfully loaded
 shared lib "dw_stl.so" version 159 successfully loaded
 shared lib "dw_gui.so" version 159 successfully loaded
 shared lib "dw_mdm.so" version 159 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3900
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >sapprodail_ARP_01 <
DpShMCreate: sizeof(wp_adm) 19200 (1600)
DpShMCreate: sizeof(tm_adm) 5941560 (29560)
DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
DpCommTableSize: max/headSize/ftSize/tableSize=500/8/548056/548064
DpShMCreate: sizeof(comm_adm) 548064 (1088)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm) 0 (104)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(vmc_adm) 0 (1864)
DpShMCreate: sizeof(wall_adm) (40056/36728/64/192)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 0x700000000126000, size: 6626392)
DpShMCreate: allocated sys_adm at 0x700000000126000
DpShMCreate: allocated wp_adm at 0x7000000001280f8
DpShMCreate: allocated tm_adm_list at 0x70000000012cbf8
DpShMCreate: allocated tm_adm at 0x70000000012cc58
DpShMCreate: allocated wp_ca_adm at 0x7000000006d7590
DpShMCreate: allocated appc_ca_adm at 0x7000000006dd350
DpShMCreate: allocated comm_adm at 0x7000000006df290
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 0x700000000764f70
DpShMCreate: allocated gw_adm at 0x700000000764ff0
dev_disp (58%)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(vmc_adm) 0 (1864)
DpShMCreate: sizeof(wall_adm) (40056/36728/64/192)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 0x700000000126000, size: 6626392)
DpShMCreate: allocated sys_adm at 0x700000000126000
DpShMCreate: allocated wp_adm at 0x7000000001280f8
DpShMCreate: allocated tm_adm_list at 0x70000000012cbf8
DpShMCreate: allocated tm_adm at 0x70000000012cc58
DpShMCreate: allocated wp_ca_adm at 0x7000000006d7590
DpShMCreate: allocated appc_ca_adm at 0x7000000006dd350
DpShMCreate: allocated comm_adm at 0x7000000006df290
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 0x700000000764f70
DpShMCreate: allocated gw_adm at 0x700000000764ff0
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 0x700000000765020
DpShMCreate: allocated wall_adm at 0x700000000765028
MBUF state OFF
DpCommInitTable: init table for 500 entries
rdisp/queue_size_check_value : -> off
ThTaskStatus: rdisp/reset_online_during_debug 0
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 4096 kByte.
Using implementation std
<ES> Info: use normal pages (no huge table support available)
EsStdUnamFileMapInit: ES base = 0x0x700000030000000
EsStdInit: Extended Memory 4092 MB allocated
<ES> 1022 blocks reserved for free list.
ES initialized.
WLM Tag 'ARP/DSP' successfully set for this process
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 3.0 3.0 4.0.1) [dpxxdisp.c 1656]
***LOG Q0K=> DpMsAttach, mscon ( sapprodail) [dpxxdisp.c 11937]
DpStartStopMsg: send start message (myname is >sapprodail_ARP_01 <)
DpStartStopMsg: start msg sent to message server o.k.
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
CCMS: Initalizing shared memory of size 60000000 for monitoring segment.
CCMS: Checking Downtime Configuration of Monitoring Segment.
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 7000, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1050]
DpMsgAdmin: Set patchno for this platform to 159
Release check o.K.
Sat Oct 11 14:46:32 2008
MBUF state ACTIVE
DpModState: change server state from STARTING to ACTIVE
Please help me step by step to solve this problem.
Regards
Edited by: Infoseek Sap123 on Oct 12, 2008 8:22 AM

The command is
dpmon pf=/usr/sap/SID/SYS/profile/<profile>
Regards

Need Applying Note 1422843 steps for my SAP system

Similar Messages

Maybe you are looking for