Need assistance on ipod

Hi there,
How can I load my avi files onto my ipod (1st gen ipod video, 30 gig)? What are the steps? Please help!
thanks!
Pete

Move the files into the iTunes library, find and use the Convert Selection for iPod command, and sync the iPod. Some AVI files cannot be played or converted in Mac OS X, and either the video or audio tracks may be lost during the conversion depending on the format.
(30694)

Similar Messages

HT3743 Alright! But i need help to unjailbreak my iPod Touch now. I need assistance. Please help me!

I need help to unjailbreak my iPod Touch now. I need assistance. Please help me!

Jailbreaking voids the Apple warranty and also means that you will not get any support from Apple, including from this Apple forum. Jailbreaking can't be discussed in this Apple forum.
Unauthorized modification of iOS has been a major source of instability, disruption of services, and other issues
Go to where you found out how to jailbreak

Do I need a new iPod?

I've had some issues. On Thursday my iPod skipped a song so I did a backup and restore. I had done this two or three weeks ago. Last night it crashed in a Skype call when 20% notice popped up. It froze on the blue screen for log in of Skype when I tried to reopen. It would darken slightly but not shut off. Not when I hit the power button or hit home button. Only assistive touch would work. I had to back up and restore for it to work again. It may be on the apps part though, because when the apps were reinstalling, Skype was com.skype. I deleted it from iTunes and my device. And today, I had an audio file playing in a Tumblr post, went to Kik, double tapped home in assistive touch and paused it. As I was typing, voice control kept opening. Then my music began to play and fast foward like it was being held. I hit the home button (normal as it does work) to see if it was that then went to settings and turned assistive off then on. The one who I was talking to said it had happened to their iPod when they were in humid weather. It's not humid where I live so I doubt that is what caused it. It's fine for now (has been about fifteen minutes but I plan to do a back up and restore.
Do I need a new iPod or is there a way to fix these issues?

Are the problems you experience significant?
If they are minor, you always have the option to continue using the device until problems of a more significant matter occur. Once that were to happen, if it happens, a hard reset could be used to restore to a back up point. iCloud can also be used to back up your device on a regular basis without you having to worry about doing it manually. Once your device is plugged into a power source and connected to wifi (maybe at the end of the day) it backs up automatically.
What iCloud backs up:
http://support.apple.com/kb/PH12519?viewlocale=en_US
How to Back Up to iCloud:
http://support.apple.com/kb/HT1766

I need help, my ipod touch is not recognized by windows as a harddisk

i need help, my ipod touch is not recognized by windows like a memory card or a harddisk.
i would like to transfer the files from pc to my ipod touch without useing itunes.
as i see theres some people here that theires ipod touch are recongnzed as a digitl camra, mine is reconzied as nothing, some help plz.
Message was edited by: B0Om

B0Om wrote:
ok but i still dont understed, only my itnes recongnize my ipod, when i go to " my cumputer, it dosent show up there, not even as a digital camra
Your Touch is working correctly. Currently, without unsupported third party hacks, the Touch has NO disc mode. It will only show up in iTunes.
how do i put programes and games in my ipod touch
Right now, you don't. The SDK is scheduled to be released in Feburary. Then developers will be able to write programs that will be loadable.

Hi...lags animations in games and messages and album pic..when disable assistive touch,it's true and fix..please release update to fix this in ios 7.1..i need assistive touch and fast game and animation booth!!

Hi...lags animations in games and messages and album pic..when disable assistive touch,it's true and fix..please release update to fix this in ios 7.1..i need assistive touch and fast game and animation booth!!

No Apple here, user to user forum.
I will not be releasing any version of iOS ever.

I am trying to setup Microsoft office mail and need assistance - I am receiving the error, unable to find server and DNS setting in the Network

I am trying to setup Microsoft office mail and need assistance - I am receiving the error, unable to find server and DNS setting in the Network

Which version of OSX and what email provider are you using.

I'm uploading a photobook I made to be published. I need assistance in getting it to apple. The book is assembled and gets to the end of uploading when I get an error message, an error occurred while uploading. I have been trying all night. Help!

I'm uploading a photobook I made to be published. I need assistance in getting it to apple. The book is assembled and gets to the end of uploading when I get an error message, an error occurred while uploading. I have been trying all night. Help!

Welcome to the Apple Community.
I have seen previous versions mentioned in a pop up message before on iCloud.com, but I'm not really sure at all how it would help, as I couldn't get it to do anything.
The best advice I have at this time is to back up your work on your iOS device by regularly saving it to iTunes, if anything goes wrong you can then either load it into the numbers app again on the device or recover it via iTunes on your computer.
My syncs are immediate, I never get chance to see if it works in the background, sorry.

Can you make a app for texting that dont need wifi for iPod touch

Can you make a app for texting that dont need wifi for iPod touch

I don't think that even possible without any kind of connection

Need assistance with Windows 2008 R2 server BSOD - ATTEMPTED_EXECUTE_OF_NOEXECUTE_MEMORY (fc)

Need assistance with Windows 2008 R2 server BSOD - ATTEMPTED_EXECUTE_OF_NOEXECUTE_MEMORY (fc)
I have a Windows 2008 R2 server which is experiencing random BSOD during the night. This is occurring maybe once or twice a week. I have gathered two Memory crash files. This server is running Citrix XenApp 6.5 but nothing else is reporting an issue except
for the memory dump. I’m looking for assistance in reading crash file and finding the cause.
I’ve spent over a week going through articles trying to learn and trouble shoot the BSOD but no closer to understanding the WinDbg 6.3.9600 report.
This is a production server and I have verified that Windows Updates has updated the server with latest releases. I’m hoping that the crash file will show something before I have to run the Driver Verifier.
The crash zip file is located -
https://onedrive.live.com/redir?resid=9644A4E0A26873B1!2359&authkey=!AMS4Svuk-SS3-JA&ithint=file%2czip
*                        Bugcheck Analysis
ATTEMPTED_EXECUTE_OF_NOEXECUTE_MEMORY (fc)
An attempt was made to execute non-executable memory. The guilty driver
is on the stack trace (and is typically the current instruction pointer).
When possible, the guilty driver's name (Unicode string) is printed on
the bugcheck screen and saved in KiBugCheckDriver.
Arguments:
Arg1: fffff880009eff38, Virtual address for the attempted execute.
Arg2: 8000000002cfe963, PTE contents.
Arg3: fffff8800da2eea0, (reserved)
Arg4: 0000000000000002, (reserved)
Debugging Details:
DEFAULT_BUCKET_ID: WIN7_DRIVER_FAULT
BUGCHECK_STR: 0xFC
PROCESS_NAME: powershell.exe
CURRENT_IRQL: 0
ANALYSIS_VERSION: 6.3.9600.17237 (debuggers(dbg).140716-0327) amd64fre
TRAP_FRAME: fffff8800da2eea0 -- (.trap 0xfffff8800da2eea0)
NOTE: The trap frame does not contain all registers.
Some register values may be zeroed or incorrect.
rax=fffffa80070f3648 rbx=0000000000000000 rcx=fffffa80070f3648
rdx=fffff8800da2fbf8 rsi=0000000000000000 rdi=0000000000000000
rip=fffff80001680b80 rsp=fffff8800da2f030 rbp=fffff8800da2fbd0
r8=fffff8a01804c680 r9=fffff8800da2fc68 r10=fffffffffffffffd
r11=fffff8800da2fa90 r12=0000000000000000 r13=0000000000000000
r14=0000000000000000 r15=0000000000000000
iopl=0         nv up di pl nz na pe nc
nt!KiPageFault:
fffff800`01680b80 55              push    rbp
Resetting default scope
STACK_COMMAND: kb
FOLLOWUP_IP:
nt! ?? ::FNODOBFM::`string'+44dfc
fffff800`017008b8 cc              int     3
SYMBOL_STACK_INDEX: 1
SYMBOL_NAME: nt! ?? ::FNODOBFM::`string'+44dfc
FOLLOWUP_NAME: MachineOwner
MODULE_NAME: nt
IMAGE_NAME: ntkrnlmp.exe
DEBUG_FLR_IMAGE_TIMESTAMP: 531590fb
IMAGE_VERSION: 6.1.7601.18409
FAILURE_BUCKET_ID: X64_0xFC_nt!_??_::FNODOBFM::_string_+44dfc
BUCKET_ID: X64_0xFC_nt!_??_::FNODOBFM::_string_+44dfc
ANALYSIS_SOURCE: KM
FAILURE_ID_HASH_STRING: km:x64_0xfc_nt!_??_::fnodobfm::_string_+44dfc
FAILURE_ID_HASH: {aa632d36-b0f7-67cf-89e2-1cec389c0a11}
Followup: MachineOwner

Hi Kaysel_GTG,
Just addition. Regarding to Bug Check 0xFC, please refer to following article and check if can help you.
Bug Check 0xFC: ATTEMPTED_EXECUTE_OF_NOEXECUTE_MEMORY
By the way, since it is not effective for us to debug the crash dump file here in the forum. If this issues is a state of emergency for you. Please contact Microsoft Customer
Service and Support (CSS) via telephone so that a dedicated Support Professional can assist with your request.
To obtain the phone numbers for specific technology request, please refer to the web site listed below:
http://support.microsoft.com/default.aspx?scid=fh;EN-US;OfferProPhone#faq607
if any update, please feel free to let us know.
Hope this helps.
Best regards,
Justin Gu

I need a replacement ipod

I need a replacement ipod again and this time there saying that I have to pay $32 for shipping but it is still well under warranty for I purchased it on Jun 24 06. Does anyone know what I should do? Does anyone know what do I have to bring to the apple store if I want a replacement.

It should cost nothing if it is less than 6 months since purchase.
Go here and put in your serial number at the bottom right.
http://www.apple.com/support/
It should tell you how long you have left on the warranty (it comes with a one year warranty).
If it's wrong, you need to have proof of purchase.

Need assistance to update Photoshop cs6 and Lightroom to version 2014. Please help!

Need assistance to update Photoshop cs6 and Lightroom to version 2014.
I have a Mac. I am not a member in Creative Cloud, invested big and bought CS6 and LR in the beginning of last year.
Please help!

These are not updates (just as CS6 was not an update to CS5), but upGRADES. They are available to CC (Creative Cloud) subscribers. While in the past you might have been able to pay for an upgrade (e.g. CS5 to CS6) you now have to subscribe. Once you are a subscriber you can upgrade to each new version as it comes along.
As well as the full CC subscription there is a $10/mo plan with only Photoshop and Lightroom. Creative Cloud Photography plan | Adobe Creative Cloud

Need assistance posting Webhelp to Company Sharepoint site

Need assistance posting Webhelp to Company Sharepoint site.

Check out this Adobe blog post and see if it helps: http://blogs.adobe.com/techcomm/2012/10/integrating-robohelp-projects-with-sharepoint.html. It would also be a good idea to ensure you have the appropriate SharePoint permissions for RoboHelp to write to your document folder.
You may also want to look at this webinar; http://www.adobe.com/cfusion/event/index.cfm?event=set_registered&id=2099687&loc=en_us

Tried to reinstall PS CS6 from download, will not load after download and install, need assistance

I tried to reinstall PS CS6 from download, will not load after download and install, need assistance.
Thank you.

Thanks for the suggestion - but I eventually tried again and was able to contact via "chat" to someone qualified to help. The problem was that in my existing "bridge" - preference was (I think by default) - checked to startup in background on Login. I did not realize this - because I don't think I set it that way in the first place (maybe I did a few years ago) - and I could not see anything in task manager to suggest that bridge was running an application or any process - but when I learned this - I was successful in installing PS CS6.
Yes, I'm still not on solid ground re: whether or not I want to change from "owning" the tool or renting it -- what concerns me is that is sounds like regardless of users wishes, Adobe is headed in this direction and will eventually make it financially more feasible to go that route. At the moment I think they are "asking" for everyone to get on their bandwagon, but who knows. They have a powerful set of tools, that they continue to support and advance - and along with those development and support costs, they also would like to make a profit - so I understand if their past marketing model is no longer sufficient.
Thanks again.
John

Compiling a driver, need assistance on kernel source configuration

Hello BBS.
I am compiling a module for the Asus PCE N53 wireless pci-e card. I have obtained the driver source, and followed the instructions, and have gotten to the point where I need assistance. The instructions requires the kernel source, i have successfully obtained and configured it using the Command line prompt, except for one feature. I need to enable the intel IPW2200 driver code in the kernel source for this driver. What procedure do I follow to enable it?

> I know in face value, that my request may seem odd. I just need to use the source of the kernel, not a new kernel... I have found that what I am requesting... will fix the problem, based on a Gentoo solution: http://forums.gentoo.org/viewtopic-t-93 … art-0.html. Needing to know how to configure the kernel source to enable the intel driver still stands. The source I am using is the latest arch kernel source.
===============
RT5592 Linux Driver quick start
====================
Check tools:
====================
*Before install driver, please check already install compile tool and kernel source code
1>Install compile tool
$yum install gcc-c++
2>check kernel source code exists /usr/src/kernels/ "kernel name"
Download your kernel source code
*http://www.kernel.org/pub/linux/kernel/
or
$yum install kernel-devel
====================
Build Instructions:
====================
1> $tar -jxvf DPO_GPL_RT5592STA_LinuxSTA_vx.x.x.x.tar.bz2
go to "DPO_GPL_RT5592STA_LinuxSTA_vx.x.x.x" directory.
2> In Makefile
set the "MODE = STA" in Makefile and chose the TARGET to Linux by set "TARGET = LINUX"
define the linux kernel source include file path LINUX_SRC
modify to meet your need.
3> In os/linux/config.mk
define the GCC and LD of the target machine
define the compiler flags CFLAGS
modify to meet your need.
** Build for being controlled by NetworkManager or wpa_supplicant wext functions
Please set 'HAS_WPA_SUPPLICANT=y' and 'HAS_NATIVE_WPA_SUPPLICANT_SUPPORT=y'.
=> $wpa_supplicant -Dwext -ira0 -c wpa_supplicant.conf -d
** Build for being controlled by WpaSupplicant with Ralink Driver
Please set 'HAS_WPA_SUPPLICANT=y' and 'HAS_NATIVE_WPA_SUPPLICANT_SUPPORT=n'.
=> $wpa_supplicant -Dralink -ira0 -c wpa_supplicant.conf -d
4> $make
# compile driver source code, need administrator.
# To fix "error: too few arguments to function ¡¥iwe_stream_add_event"
=> $patch -i os/linux/sta_ioctl.c.patch os/linux/sta_ioctl.c
5> $make install
#install driver
#copy RT2860STA.dat to /etc/Wireless/RT2860STA/RT2860STA.dat
6>$vi /etc/rc.d/rc.local
#input "ifconfig ra0 up"
$reboot
7> unload driver
$ifconfig ra0 down
$rmmod rt5592sta
======
Heres the output of my error, when I compile:
=======
make -C tools
make[1]: Entering directory `/home/white/driver/DPO_GPL_RT5592STA_LinuxSTA_v2.6.0.0_20120326/tools'
gcc -g bin2h.c -o bin2h
make[1]: Leaving directory `/home/white/driver/DPO_GPL_RT5592STA_LinuxSTA_v2.6.0.0_20120326/tools'
/home/white/driver/DPO_GPL_RT5592STA_LinuxSTA_v2.6.0.0_20120326/tools/bin2h
cp -f os/linux/Makefile.6 /home/white/driver/DPO_GPL_RT5592STA_LinuxSTA_v2.6.0.0_20120326/os/linux/Makefile
make -C /home/white/linux-3.2.9 SUBDIRS=/home/white/driver/DPO_GPL_RT5592STA_LinuxSTA_v2.6.0.0_20120326/os/linux modules
make[1]: Entering directory `/home/white/linux-3.2.9'
WARNING: Symbol version dump /home/white/linux-3.2.9/Module.symvers
is missing; modules will have no dependencies and modversions.
CC [M] /home/white/driver/DPO_GPL_RT5592STA_LinuxSTA_v2.6.0.0_20120326/os/linux/../../os/linux/sta_ioctl.o
/home/white/driver/DPO_GPL_RT5592STA_LinuxSTA_v2.6.0.0_20120326/os/linux/../../os/linux/sta_ioctl.c:2364:2: error: unknown field ‘private’ specified in initializer
/home/white/driver/DPO_GPL_RT5592STA_LinuxSTA_v2.6.0.0_20120326/os/linux/../../os/linux/sta_ioctl.c:2364:2: warning: initialization from incompatible pointer type [enabled by default]
/home/white/driver/DPO_GPL_RT5592STA_LinuxSTA_v2.6.0.0_20120326/os/linux/../../os/linux/sta_ioctl.c:2364:2: warning: (near initialization for ‘rt28xx_iw_handler_def.get_wireless_stats’) [enabled by default]
/home/white/driver/DPO_GPL_RT5592STA_LinuxSTA_v2.6.0.0_20120326/os/linux/../../os/linux/sta_ioctl.c:2365:2: error: unknown field ‘num_private’ specified in initializer
/home/white/driver/DPO_GPL_RT5592STA_LinuxSTA_v2.6.0.0_20120326/os/linux/../../os/linux/sta_ioctl.c:2365:2: warning: excess elements in struct initializer [enabled by default]
/home/white/driver/DPO_GPL_RT5592STA_LinuxSTA_v2.6.0.0_20120326/os/linux/../../os/linux/sta_ioctl.c:2365:2: warning: (near initialization for ‘rt28xx_iw_handler_def’) [enabled by default]
/home/white/driver/DPO_GPL_RT5592STA_LinuxSTA_v2.6.0.0_20120326/os/linux/../../os/linux/sta_ioctl.c:2366:2: error: unknown field ‘private_args’ specified in initializer
/home/white/driver/DPO_GPL_RT5592STA_LinuxSTA_v2.6.0.0_20120326/os/linux/../../os/linux/sta_ioctl.c:2366:26: warning: excess elements in struct initializer [enabled by default]
/home/white/driver/DPO_GPL_RT5592STA_LinuxSTA_v2.6.0.0_20120326/os/linux/../../os/linux/sta_ioctl.c:2366:26: warning: (near initialization for ‘rt28xx_iw_handler_def’) [enabled by default]
/home/white/driver/DPO_GPL_RT5592STA_LinuxSTA_v2.6.0.0_20120326/os/linux/../../os/linux/sta_ioctl.c:2367:2: error: unknown field ‘num_private_args’ specified in initializer
/home/white/driver/DPO_GPL_RT5592STA_LinuxSTA_v2.6.0.0_20120326/os/linux/../../os/linux/sta_ioctl.c:2367:2: warning: excess elements in struct initializer [enabled by default]
/home/white/driver/DPO_GPL_RT5592STA_LinuxSTA_v2.6.0.0_20120326/os/linux/../../os/linux/sta_ioctl.c:2367:2: warning: (near initialization for ‘rt28xx_iw_handler_def’) [enabled by default]
make[2]: *** [/home/white/driver/DPO_GPL_RT5592STA_LinuxSTA_v2.6.0.0_20120326/os/linux/../../os/linux/sta_ioctl.o] Error 1
make[1]: *** [_module_/home/white/driver/DPO_GPL_RT5592STA_LinuxSTA_v2.6.0.0_20120326/os/linux] Error 2
make[1]: Leaving directory `/home/white/linux-3.2.9'
make: *** [LINUX] Error 2
Last edited by confusedoldman (2012-12-25 20:14:34)

I need assistance opening a zip file.

I need assistance opening a zip file. Please advise or assist.
Thanks,
TIGER FRANK

Hi TIGER FRANK
Please download winzip from below link and install it to open .zip files ...
http://www.winzip.com/downwz.htm

Need assistance on ipod

Similar Messages

Maybe you are looking for