Need Assistance on OS Installation without CD

Dear All..
Iam having a two year old MacBookAir with MAC OS X Leopard preinstalled, But for the past few months iam getting some problems and thought of re-installing the OS. But i lost the CD provided with the Mac book.
Is there any way of installing the OS back without the CD provided with the mac book air..?
is there any URL were i can downloaded the OS for installation..?
Please advice.

Is there any way of installing the OS back without the CD provided with the mac book air..?
Yes. Purchase a retail Mac OS X package newer than the MacBook Air, or contact Apple and order replacement original disks.
iLife isn't included with retail OS versions other than the Mac Box Set. Retail OS X packages don't contain Apple Hardware Test.
is there any URL were i can downloaded the OS for installation..?
None unless Apple has told you otherwise.
(57256)

Similar Messages

Need assistance with BIOS Installation

I already downloaded BIOS last update as a ZIP file ,what is the next step?
How to install?

Extract the files onto desktop and from there start BIOS update.
Be sure the notebook is connected to the AC adapter and dont interrupt BIOS update.

Crystal Runtime Installation without RDC

Moved Per Request
I am a design engineer with a development company who has been asked to update work previously done by an employee no longer with the company. The problem is that we have used a crystal reports runtime install that contains RDC. This gives users the ability to edit reports and so on. We have taken a different direction and we are looking to only supply canned reports that cannot be modified. We still need to provide runtime installation for crystal, but I have not been successful in finding the correct information.
Currently we call ReportsRuntime.msi which is tied to a Data1.cab file. I am not sure if this was generated via the companies installshield or was provided and received via BO.
My best guess is that it is ours and we are using Crystal 11 runtime within it. If so I can address that, however, I simply want to make sure I either have the correct runtime install or know for sure what files I need to pull in order to have a distribution without RDC.
As of right now I believe these will be:
CRDesignerCtrl.*
Craxddrt.*
Craxdrt.*
Any assistance to get me in the right direction would be appreciated.
Leon Elzie

Leon, when you say you will be using the RDC, I assume this is an app coded in VB 6, C++, etc.(?). That being the case I think the best way to approach this is to figure out what is the exact runtime you are using and the exact version you are using. I can then recommend the correct msms and other sources of information. You will have to then build an installation package using a utility such as InstallShield, Wise, MS Visual Installer, etc.
The msi and cab you mention does not come from Crystal / BO / SAP and I am not quite sure why you can not use it...(?).
To figure out the runtime, download the Module utility from here:
https://smpdl.sap-ag.de/~sapidp/012002523100006252802008E/modules.zip
Use it as follows:
1) Run your RDC app and process a report
2) Start Modules
3) Go tot he File menu, select New list -> Memory modules
4) Save the file
5) Expand the "By process" node and fine your app exe
6) Click on the name exe, right side pane will get populated with the dlls loaded by the app.
7) Go to the View menu and select details
8) Look for craxdrt.dll, crviewer.dll and craxddrt.dll
9) Let me know the version of each of the above and the path they are loading from.
Ludek

Db assistant dies during installation of 8I on RH 6.0

Every time I have tried to install 8I, the db assistant dies during installation. It won't run from the command line either, in fact it has never run. The error is
Unable to initialize threads: cannot find class java/lang/Thread
Could not create Java VM
I have 128 m of RAM and almost .5 gig of VM
What's going on and what's the fix.
Fred

You have the jdk and not the jre.
For more details, see: http://homepages.tig.com.au/~jmsalvo/linux/oracle8i.html
Oh, and you can create a db without using dbassist. Also listed in my help page.

Host Not Responding and Needs Assistance

I have a VMM 2012 R2 Cluster based on two nodes. Both nodes have similar hardware configuration. When I move the VMM Cluster to Node 2, I face an issue of
Host Not Responding and Needs Assistance on almost all Hyper-V Host Servers. But, When I move the Cluster to Node 1 off VMM, everything starts working and works undisturbed for days. What could be different
between two hosts that can cause such a behavior that causes connection loss and thus the above error in the console. How can I identify what is different in the first node from second node?

hi ATR,
Thanks for your prompt reply:
1 b. after you are in the workspace and are importing/editing/exporting? During Editing and add pictures and gopro files to the time line
2
1. Are you running the program as Administrator with an Internet connection?
No not running in admin mode.
Wifi connection is on
Do you have the latest version of QuickTime
Nieuw in QuickTime 7.7.6
installed on your computer along with Premiere Elements 11? yes
computer see attachment
2. Does the problem exist with or without the antivirus and firewall(s) disabled?
not tried yet , now avg 2015 virus scanner is on
3. Are you working with pen and tablet device instead of mouse?
No only laptop elan smart pad , on laptop.
4. Is your video card/graphics card up to date according to the web site of the manufacturer of the card? How many
video cards/graphics cards does you computer use?
yes up to date only 1 card
5. Please describe your computer resources - processor, clock speed, installed RAM, available hard drive space?
Is the program installed to the default Local Disk C?
Installed on local disk drive C
See attachment for details

Need assistance installing MindStorm NXT module on my desktop with Win XP and also my laptop which runs Win 7, software does not want to install?

I need assistance to install LabView MindStorm NXT module in a Desktop system with Win XP and a Laptop with Win7. Both are 32 bit with all service packs applied. I purchased the academic version from a company called On-The-Hub.
Attempted to install but seems to reject my serial number?

Hi Rob,
Thats really strange because the NXT Module 2010 and the NXT Module 2011 are free and don't require serial numbers. Where did you obtain the installer? The core LabVIEW installer requires a serial number but if you already have that installed, the NXT Module is just a free addon. Here are the links to the module for LabVIEW 2010 & 2011
NXT Module 2011 : http://joule.ni.com/nidu/cds/view/p/id/2637/lang/en
NXT Module 2010: http://joule.ni.com/nidu/cds/view/p/id/2551/lang/en

Help needed Displaying ALV Secondary list without using oops concept

Hi Experts
Help needed Displaying ALV Secondary list without using oops concept.
its urgent
regds
rajasekhar

hi chk this code
******************TABLES DECLARATION*****************
TABLES : VBAP,MARA.
*****************TYPE POOLS**************************
TYPE-POOLS : SLIS.
****************INTERNAL TABLES**********************
DATA : BEGIN OF IT_VBAP OCCURS 0,
VBELN LIKE VBAP-VBELN, "SALES DOCUMENT
POSNR LIKE VBAP-POSNR, "SALES DOCUMENT ITEM
MATNR LIKE VBAP-MATNR, "MATERIAL NUMBER
END OF IT_VBAP.
****************TEMPORARY VARIABLES******************
DATA : V_VBELN LIKE VBAP-VBELN."SALES DOCUMENT
DATA : V_MTART LIKE MARA-MTART. "MATERIAL TYPE
*****************FIELD CATALOG***********************
DATA : IT_FIELDCAT TYPE SLIS_T_FIELDCAT_ALV,
       WA_FIELDCAT TYPE SLIS_FIELDCAT_ALV.
****************LAYOUT*******************************
DATA : WA_LAYOUT TYPE SLIS_LAYOUT_ALV.
***************VARIANT*******************************
DATA : G_VARIANT LIKE DISVARIANT.
****************SAVE*********************************
DATA : G_SAVE(1) TYPE C.
*****************EVENTS******************************
DATA : XS_EVENTS TYPE SLIS_ALV_EVENT,
       G_EVENTS TYPE SLIS_T_EVENT.
******************PF STATUS**************************
DATA : PF_STATUS TYPE SLIS_FORMNAME VALUE 'SET_PF_STATUS'.
******************USER COMMAND************************
DATA : USER_COMMAND TYPE SLIS_FORMNAME VALUE 'SET_USER_COMMAND',
       R_UCOMM LIKE SY-UCOMM.
****************SELECTION SCREEN************************
SELECT-OPTIONS : S_VBELN FOR VBAP-VBELN.
***************AT SELECTION SCREEN*********************
AT SELECTION-SCREEN.
PERFORM VALIDATE.
**************START-OF-SELECTION**************************
START-OF-SELECTION.
PERFORM GET_DETAILS.
PERFORM FIELDCAT.
PERFORM LAYOUT.
PERFORM VARIANT.
PERFORM SAVE.
PERFORM EVENTS.
PERFORM ALV_DISPLAY.
*********************FORMS*******************************************
*&      Form validate
      text
--> p1        text
<-- p2        text
FORM VALIDATE .
SELECT SINGLE VBELN
                FROM VBAP
                INTO V_VBELN
                WHERE VBELN IN S_VBELN.
IF SY-SUBRC <> 0.
    MESSAGE E000 WITH 'enter valid vbeln'.
ENDIF.
ENDFORM.                    " validate
*&      Form get_details
      text
--> p1        text
<-- p2        text
FORM GET_DETAILS .
SELECT VBELN
         POSNR
         MATNR
         FROM VBAP
         INTO TABLE IT_VBAP
         WHERE VBELN IN S_VBELN.
IF SY-SUBRC <> 0.
    MESSAGE E000 WITH 'no details found'.
ENDIF.
ENDFORM.                    " get_details
*&      Form fieldcat
      text
--> p1        text
<-- p2        text
FORM FIELDCAT .
WA_FIELDCAT-TABNAME = 'IT_VBAP'.
WA_FIELDCAT-FIELDNAME = 'VBELN'.
WA_FIELDCAT-OUTPUTLEN = 10.
WA_FIELDCAT-SELTEXT_L = 'SALES DOC'.
APPEND WA_FIELDCAT TO IT_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-TABNAME = 'IT_VBAP'.
WA_FIELDCAT-FIELDNAME = 'POSNR'.
WA_FIELDCAT-OUTPUTLEN = 6.
WA_FIELDCAT-SELTEXT_L = 'ITEM'.
APPEND WA_FIELDCAT TO IT_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-TABNAME = 'IT_VBAP'.
WA_FIELDCAT-FIELDNAME = 'MATNR'.
WA_FIELDCAT-OUTPUTLEN = 18.
WA_FIELDCAT-SELTEXT_L = 'MATERIAL NO'.
APPEND WA_FIELDCAT TO IT_FIELDCAT.
CLEAR WA_FIELDCAT.
ENDFORM.                    " fieldcat
*&      Form LAYOUT
      text
--> p1        text
<-- p2        text
FORM LAYOUT .
WA_LAYOUT-ZEBRA = 'X'.
ENDFORM.                    " LAYOUT
*&      Form VARIANT
      text
--> p1        text
<-- p2        text
FORM VARIANT .
CLEAR G_VARIANT.
G_VARIANT-REPORT = SY-REPID.
ENDFORM.                    " VARIANT
*&      Form SAVE
      text
--> p1        text
<-- p2        text
FORM SAVE .
CLEAR G_SAVE.
G_SAVE = 'A'.
ENDFORM.                    " SAVE
*&      Form EVENTS
      text
--> p1        text
<-- p2        text
FORM EVENTS .
CLEAR XS_EVENTS.
XS_EVENTS-NAME = SLIS_EV_TOP_OF_PAGE.
XS_EVENTS-FORM = 'TOP_OF_PAGE'.
APPEND XS_EVENTS TO G_EVENTS.
ENDFORM.                    " EVENTS
*&      Form TOP_OF_PAGE
      text
FORM TOP_OF_PAGE.
WRITE :/ ' INTELLI GROUP'.
ENDFORM.                    "TOP_OF_PAGE
*&      Form ALV_DISPLAY
      text
--> p1        text
<-- p2        text
FORM ALV_DISPLAY .
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
   EXPORTING
I_INTERFACE_CHECK              = ' '
I_BYPASSING_BUFFER             =
I_BUFFER_ACTIVE                = ' '
     I_CALLBACK_PROGRAM             = SY-REPID
     I_CALLBACK_PF_STATUS_SET       = PF_STATUS
     I_CALLBACK_USER_COMMAND        = USER_COMMAND
I_STRUCTURE_NAME               =
     IS_LAYOUT                      = WA_LAYOUT
     IT_FIELDCAT                    = IT_FIELDCAT
IT_EXCLUDING                   =
IT_SPECIAL_GROUPS              =
IT_SORT                        =
IT_FILTER                      =
IS_SEL_HIDE                    =
I_DEFAULT                      = 'X'
     I_SAVE                         = G_SAVE
     IS_VARIANT                     = G_VARIANT
     IT_EVENTS                      = G_EVENTS
IT_EVENT_EXIT                  =
IS_PRINT                       =
IS_REPREP_ID                   =
I_SCREEN_START_COLUMN          = 0
I_SCREEN_START_LINE            = 0
I_SCREEN_END_COLUMN            = 0
I_SCREEN_END_LINE              = 0
IMPORTING
E_EXIT_CAUSED_BY_CALLER        =
ES_EXIT_CAUSED_BY_USER         =
    TABLES
      T_OUTTAB                       = IT_VBAP
   EXCEPTIONS
     PROGRAM_ERROR                  = 1
     OTHERS                         = 2
IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM.                    " ALV_DISPLAY
*&      Form SET_PF_STATUS
      text
FORM SET_PF_STATUS USING EXTAB TYPE SLIS_T_EXTAB.
SET PF-STATUS 'Z50651_PFSTATUS' EXCLUDING EXTAB.
ENDFORM.                    "SET_PF_STATUS
*&      Form SET_USER_COMMAND
      text
FORM SET_USER_COMMAND USING R_UCOMM
                            RS_SELFIELD TYPE SLIS_SELFIELD.
CASE R_UCOMM.
    WHEN 'DC'.
      READ TABLE IT_VBAP INDEX RS_SELFIELD-TABINDEX.
      IF SY-SUBRC = 0.
        SELECT SINGLE MTART
                      FROM MARA
                      INTO V_MTART
                      WHERE MATNR = IT_VBAP-MATNR.
        IF SY-SUBRC <> 0.
   MESSAGE E000 WITH 'NO MATERIAL DESCRIPTION FOR SELECTED MATERIAL NO'.
        ELSE.
          WRITE :/ 'MATERIAL NO :',IT_VBAP-MATNR.
          WRITE :/ 'MATERIAL TYPE :' , V_MTART.
        ENDIF.
      ENDIF.
    WHEN 'BACK'.
      LEAVE TO SCREEN 0.
    WHEN 'EXIT'.
      LEAVE TO SCREEN 0.
    WHEN 'CLOSE'.
      CALL TRANSACTION 'SE38'.
ENDCASE.
REPORT Z_ALV_INTERACTIVE MESSAGE-ID ZMSG_50651
                                LINE-SIZE 100
                                LINE-COUNT 60
                                NO STANDARD PAGE HEADING.
******************TABLES DECLARATION*****************
TABLES : VBAP,MARA.
*****************TYPE POOLS**************************
TYPE-POOLS : SLIS.
****************INTERNAL TABLES**********************
DATA : BEGIN OF IT_VBAP OCCURS 0,
VBELN LIKE VBAP-VBELN, "SALES DOCUMENT
POSNR LIKE VBAP-POSNR, "SALES DOCUMENT ITEM
MATNR LIKE VBAP-MATNR, "MATERIAL NUMBER
END OF IT_VBAP.
****************TEMPORARY VARIABLES******************
DATA : V_VBELN LIKE VBAP-VBELN."SALES DOCUMENT
DATA : V_MTART LIKE MARA-MTART. "MATERIAL TYPE
*****************FIELD CATALOG***********************
DATA : IT_FIELDCAT TYPE SLIS_T_FIELDCAT_ALV,
       WA_FIELDCAT TYPE SLIS_FIELDCAT_ALV.
****************LAYOUT*******************************
DATA : WA_LAYOUT TYPE SLIS_LAYOUT_ALV.
***************VARIANT*******************************
DATA : G_VARIANT LIKE DISVARIANT.
****************SAVE*********************************
DATA : G_SAVE(1) TYPE C.
*****************EVENTS******************************
DATA : XS_EVENTS TYPE SLIS_ALV_EVENT,
       G_EVENTS TYPE SLIS_T_EVENT.
******************PF STATUS**************************
DATA : PF_STATUS TYPE SLIS_FORMNAME VALUE 'SET_PF_STATUS'.
******************USER COMMAND************************
DATA : USER_COMMAND TYPE SLIS_FORMNAME VALUE 'SET_USER_COMMAND',
       R_UCOMM LIKE SY-UCOMM.
****************SELECTION SCREEN************************
SELECT-OPTIONS : S_VBELN FOR VBAP-VBELN.
***************AT SELECTION SCREEN*********************
AT SELECTION-SCREEN.
PERFORM VALIDATE.
**************START-OF-SELECTION**************************
START-OF-SELECTION.
PERFORM GET_DETAILS.
PERFORM FIELDCAT.
PERFORM LAYOUT.
PERFORM VARIANT.
PERFORM SAVE.
PERFORM EVENTS.
PERFORM ALV_DISPLAY.
*********************FORMS*******************************************
*&      Form validate
      text
--> p1        text
<-- p2        text
FORM VALIDATE .
SELECT SINGLE VBELN
                FROM VBAP
                INTO V_VBELN
                WHERE VBELN IN S_VBELN.
IF SY-SUBRC <> 0.
    MESSAGE E000 WITH 'enter valid vbeln'.
ENDIF.
ENDFORM.                    " validate
*&      Form get_details
      text
--> p1        text
<-- p2        text
FORM GET_DETAILS .
SELECT VBELN
         POSNR
         MATNR
         FROM VBAP
         INTO TABLE IT_VBAP
         WHERE VBELN IN S_VBELN.
IF SY-SUBRC <> 0.
    MESSAGE E000 WITH 'no details found'.
ENDIF.
ENDFORM.                    " get_details
*&      Form fieldcat
      text
--> p1        text
<-- p2        text
FORM FIELDCAT .
WA_FIELDCAT-TABNAME = 'IT_VBAP'.
WA_FIELDCAT-FIELDNAME = 'VBELN'.
WA_FIELDCAT-OUTPUTLEN = 10.
WA_FIELDCAT-SELTEXT_L = 'SALES DOC'.
APPEND WA_FIELDCAT TO IT_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-TABNAME = 'IT_VBAP'.
WA_FIELDCAT-FIELDNAME = 'POSNR'.
WA_FIELDCAT-OUTPUTLEN = 6.
WA_FIELDCAT-SELTEXT_L = 'ITEM'.
APPEND WA_FIELDCAT TO IT_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-TABNAME = 'IT_VBAP'.
WA_FIELDCAT-FIELDNAME = 'MATNR'.
WA_FIELDCAT-OUTPUTLEN = 18.
WA_FIELDCAT-SELTEXT_L = 'MATERIAL NO'.
APPEND WA_FIELDCAT TO IT_FIELDCAT.
CLEAR WA_FIELDCAT.
ENDFORM.                    " fieldcat
*&      Form LAYOUT
      text
--> p1        text
<-- p2        text
FORM LAYOUT .
WA_LAYOUT-ZEBRA = 'X'.
ENDFORM.                    " LAYOUT
*&      Form VARIANT
      text
--> p1        text
<-- p2        text
FORM VARIANT .
CLEAR G_VARIANT.
G_VARIANT-REPORT = SY-REPID.
ENDFORM.                    " VARIANT
*&      Form SAVE
      text
--> p1        text
<-- p2        text
FORM SAVE .
CLEAR G_SAVE.
G_SAVE = 'A'.
ENDFORM.                    " SAVE
*&      Form EVENTS
      text
--> p1        text
<-- p2        text
FORM EVENTS .
CLEAR XS_EVENTS.
XS_EVENTS-NAME = SLIS_EV_TOP_OF_PAGE.
XS_EVENTS-FORM = 'TOP_OF_PAGE'.
APPEND XS_EVENTS TO G_EVENTS.
ENDFORM.                    " EVENTS
*&      Form TOP_OF_PAGE
      text
FORM TOP_OF_PAGE.
WRITE :/ ' INTELLI GROUP'.
ENDFORM.                    "TOP_OF_PAGE
*&      Form ALV_DISPLAY
      text
--> p1        text
<-- p2        text
FORM ALV_DISPLAY .
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
   EXPORTING
I_INTERFACE_CHECK              = ' '
I_BYPASSING_BUFFER             =
I_BUFFER_ACTIVE                = ' '
     I_CALLBACK_PROGRAM             = SY-REPID
   I_CALLBACK_PF_STATUS_SET         = PF_STATUS
     I_CALLBACK_USER_COMMAND        = USER_COMMAND
I_STRUCTURE_NAME               =
     IS_LAYOUT                      = WA_LAYOUT
     IT_FIELDCAT                    = IT_FIELDCAT
IT_EXCLUDING                   =
IT_SPECIAL_GROUPS              =
IT_SORT                        =
IT_FILTER                      =
IS_SEL_HIDE                    =
I_DEFAULT                      = 'X'
     I_SAVE                         = G_SAVE
    IS_VARIANT                      = G_VARIANT
     IT_EVENTS                      = G_EVENTS
IT_EVENT_EXIT                  =
IS_PRINT                       =
IS_REPREP_ID                   =
I_SCREEN_START_COLUMN          = 0
I_SCREEN_START_LINE            = 0
I_SCREEN_END_COLUMN            = 0
I_SCREEN_END_LINE              = 0
IMPORTING
E_EXIT_CAUSED_BY_CALLER        =
ES_EXIT_CAUSED_BY_USER         =
    TABLES
      T_OUTTAB                       = IT_VBAP
   EXCEPTIONS
     PROGRAM_ERROR                  = 1
     OTHERS                         = 2
IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM.                    " ALV_DISPLAY
*&      Form SET_PF_STATUS
      text
FORM SET_PF_STATUS USING EXTAB TYPE SLIS_T_EXTAB.
SET PF-STATUS 'STANDARD' EXCLUDING EXTAB.
ENDFORM.                    "SET_PF_STATUS
*&      Form SET_USER_COMMAND
      text
FORM SET_USER_COMMAND USING R_UCOMM
                            RS_SELFIELD TYPE SLIS_SELFIELD.
CASE R_UCOMM.
    WHEN 'DC'.
      READ TABLE IT_VBAP INDEX RS_SELFIELD-TABINDEX.
      IF SY-SUBRC = 0.
        SELECT SINGLE MTART
                      FROM MARA
                      INTO V_MTART
                      WHERE MATNR = IT_VBAP-MATNR.
        IF SY-SUBRC <> 0.
   MESSAGE E000 WITH 'NO MATERIAL DESCRIPTION FOR SELECTED MATERIAL NO'.
        ELSE.
          WRITE :/ 'MATERIAL NO :',IT_VBAP-MATNR.
          WRITE :/ 'MATERIAL TYPE :' , V_MTART.
SUBMIT SLIS_DUMMY WITH P_MATNR EQ IT_VBAP-MATNR
                    WITH P_MTART EQ V_MTART.
        ENDIF.
      ENDIF.
    WHEN 'BACK'.
      LEAVE TO SCREEN 0.
    WHEN 'EXIT'.
      LEAVE TO SCREEN 0.
    WHEN 'CLOSE'.
      CALL TRANSACTION 'SE38'.
ENDCASE.
plz reward if useful

Hi...lags animations in games and messages and album pic..when disable assistive touch,it's true and fix..please release update to fix this in ios 7.1..i need assistive touch and fast game and animation booth!!

Hi...lags animations in games and messages and album pic..when disable assistive touch,it's true and fix..please release update to fix this in ios 7.1..i need assistive touch and fast game and animation booth!!

No Apple here, user to user forum.
I will not be releasing any version of iOS ever.

I am trying to setup Microsoft office mail and need assistance - I am receiving the error, unable to find server and DNS setting in the Network

I am trying to setup Microsoft office mail and need assistance - I am receiving the error, unable to find server and DNS setting in the Network

Which version of OSX and what email provider are you using.

What configuration of the new macbook pro do I need to run FCS 3 without choppy playback.

Yep, just wondering what configuration of the new macbook pro do I need to run FCS 3 without choppy playback or lagging. I'm thinking about the 7200rpm, 2.2ghz, antiglare, 4gb ram, with 1gb GPU graphics card configuration

Nothing wrong with the computer. Playback is dependent on the media and the drives.

I'm a newbee, (Win Tech) Would like to know what command it is for reaching the reinstall menu at boot-up. I do not meen cmd r menu wich just install OSX above the OS. I think I need a totally fresh installation. Do you have any clue?

I'm a newbee, (Win Tech) Would like to know what command it is for reaching the reinstall menu at boot-up.
I do not meen cmd r menu wich just install OSX above the OS. I think I need a totally fresh installation.
Do you have any clue? Have several issues on a new MacBookPro but it's propably "PEBKAC" made..
Uffe

It is Command+r or for the online internet system it is Command+option/Alt+r keys. Then you use Disk Utility to erase the macintosh partition, from the built in recovery hd, or you can repartition the drive as one partition from the online system.
To actually get to the online internet system you have to hold that key combo down until you see a globe on the screen. Otherwise it will just boot from the built in recovery hd on the internal drive.

HT4407 When installing Windows 7 using Bootcamp, I get message: "Need 64-bit Windows Installation USB drive or DVD." I thought my install disk was for 32 or 64 bit. What does this mean?

When Installing Windows 7 using Bootcamp, I get message: "Need 64 bit Windows installation USB drive or DVD." What does this mean?

It means you need the 64 bit Version of Windows on a USB stick or DVD.

Okay, so I try to download and every time it says "There was an error creating a temporary file that is needed to complete the installation". Anyone know how to fix this?

Okay, so I try to download and every time it says "There was an error creating a temporary file that is needed to complete the installation".
Anyone know how to fix this?
Please help. I can't get it to work. I've tried uninstalling and it says the same thing. Is there anyway anyone can help me?

HELP!!!! PLEASE!!!!!

Urgent help : Need to recover a database without backup and archivelogs

Hi,
We are in urgent need to recover a database without backup and archivelogs
one datafile seems corrupted
SQL> recover automatic database until cancel using BACKUP CONTROLFILE;
ORA-00279: change 10527325422479 generated at 07/27/2011 03:13:04 needed for
thread 1
ORA-00289: suggestion : /pys/u5/oradata/PYS/PYSarch/arch0001.0000181845.arc
ORA-00280: change 10527325422479 for thread 1 is in sequence #181845
ORA-00278: log file '/pys/u5/oradata/PYS/PYSarch/arch0001.0000181845.arc' no
longer needed for this recovery
ORA-00308: cannot open archived log
'/pys/u5/oradata/PYS/PYSarch/arch0001.0000181845.arc'
ORA-27037: unable to obtain file status
HP-UX Error: 2: No such file or directory
Additional information: 3
Specify log: {<RET>=suggested | filename | AUTO | CANCEL}
CANCEL
ORA-01547: warning: RECOVER succeeded but OPEN RESETLOGS would get error below
ORA-01152: file 1 was not restored from a sufficiently old backup
ORA-01110: data file 1: '/pys/u2/oradata/PYS/pay_system_01.dbf'

N Gasparotto wrote:
bsac14 wrote:
my database is in no archive mode
can you please tell how to restore
yes it is a datafile corruptionYou did not say how you defined that's a datafile corruption. You provide minimum to zero information.
I just need to bring the database up,no need any exact data
I can refresh from prod laterThen drop and recreate database. Basically and since you are not in archive mode, no recover is possible. Period.
Nicolas.Hi,
How did you come to the conclusion that your datafile is corrupted? Can you provide and supported logs?
Regards .....

I'm uploading a photobook I made to be published. I need assistance in getting it to apple. The book is assembled and gets to the end of uploading when I get an error message, an error occurred while uploading. I have been trying all night. Help!

I'm uploading a photobook I made to be published. I need assistance in getting it to apple. The book is assembled and gets to the end of uploading when I get an error message, an error occurred while uploading. I have been trying all night. Help!

Welcome to the Apple Community.
I have seen previous versions mentioned in a pop up message before on iCloud.com, but I'm not really sure at all how it would help, as I couldn't get it to do anything.
The best advice I have at this time is to back up your work on your iOS device by regularly saving it to iTunes, if anything goes wrong you can then either load it into the numbers app again on the device or recover it via iTunes on your computer.
My syncs are immediate, I never get chance to see if it works in the background, sorry.

Need Assistance on OS Installation without CD

Similar Messages

Maybe you are looking for