Need assistance with how to run a transaction report

Is there a specific report I can run that shows who has accessed a certain transaction within a certain time frame?
I checked the SUIM reports and I dont seem to find this.

Hi Kevin,
You can see this with another T-code also Like ST03
Go to transaction:-ST03-->export mode-- workload-->particular date(on which date you require) then double click on it.
Then go to Analysis view--> time profile. Here you find time interval. Double click on it .You will found how much transactions are using in this time.
Also use User statement statics --> user profile--> double click on it. you will found ,who will using the particular T-code.
Thanks & Regards,
Bhipra Sakti

Similar Messages

HT201209 I need assistance with trying to figure out how to change my security code answer

I need assistance with trying to figure out how to change my security code answer

If you mean the answers to your security questions, then f
rom http://support.apple.com/kb/HT5665 :
If you have three security questions and a rescue email address
sign in to My Apple ID and select the Password and Security tab to send an email to your rescue email address to reset your security questions and answers (the steps half-way down that page should give you a reset link)
If you have one security question and you know your Apple ID passwordsign in to My Apple ID and select the Password and Security tab to reset your security question.
If you have one security question, but don't remember your Apple ID passwordcontact Apple Support for assistance. Learn more about creating a temporary support PIN to help Apple confirm your identity when you contact Apple Support.
If you can’t reset them via the above instructions (you won't be able to add a rescue email address until you can answer your questions) then you will need to contact iTunes Support / Apple in your country to get the questions reset.
Contacting Apple about account security : http://support.apple.com/kb/HT5699
When they've been reset (and if you don't already have a rescue email address) you can then use the steps half-way down this page to add a rescue email address for potential future use : http://support.apple.com/kb/HT5312

Need assistance with my Porsche Design LaCie Time Capsule... It is not operating at all.. I have ran the diagnostic via the Disk Utility and under the error reading it runs the repair and then says it not about to repair what do I do... Thanks

Need assistance with my Porsche Design LaCie Time Capsule... It is not operating at all.. I have ran the diagnostic via the Disk Utility and under the error reading it runs the repair and then says it not about to repair what do I do... Thanks

LaCie doesnt make ANYTHING. It contains a Seagate 3.5" 5400RPM HD.
Check the HD on another computer, if nothing, your SATA bridge is fried, or the HD (very unlikely since its a Seagate inside)
Youd have to crack open the HD, remove the SATA bridge cart thats plugged into the HD and put the HD into an enclosure or a HD dock to get the data
those external HD use a 50 cent SATA bridge famous for failing. The curse of all the good HD externals is the junk 3rd party SATA bridges attached to them that crash and burn.
Sata bridge:

Need assistance with Windows 2008 R2 server BSOD - ATTEMPTED_EXECUTE_OF_NOEXECUTE_MEMORY (fc)

Need assistance with Windows 2008 R2 server BSOD - ATTEMPTED_EXECUTE_OF_NOEXECUTE_MEMORY (fc)
I have a Windows 2008 R2 server which is experiencing random BSOD during the night. This is occurring maybe once or twice a week. I have gathered two Memory crash files. This server is running Citrix XenApp 6.5 but nothing else is reporting an issue except
for the memory dump. I’m looking for assistance in reading crash file and finding the cause.
I’ve spent over a week going through articles trying to learn and trouble shoot the BSOD but no closer to understanding the WinDbg 6.3.9600 report.
This is a production server and I have verified that Windows Updates has updated the server with latest releases. I’m hoping that the crash file will show something before I have to run the Driver Verifier.
The crash zip file is located -
https://onedrive.live.com/redir?resid=9644A4E0A26873B1!2359&authkey=!AMS4Svuk-SS3-JA&ithint=file%2czip
*                        Bugcheck Analysis
ATTEMPTED_EXECUTE_OF_NOEXECUTE_MEMORY (fc)
An attempt was made to execute non-executable memory. The guilty driver
is on the stack trace (and is typically the current instruction pointer).
When possible, the guilty driver's name (Unicode string) is printed on
the bugcheck screen and saved in KiBugCheckDriver.
Arguments:
Arg1: fffff880009eff38, Virtual address for the attempted execute.
Arg2: 8000000002cfe963, PTE contents.
Arg3: fffff8800da2eea0, (reserved)
Arg4: 0000000000000002, (reserved)
Debugging Details:
DEFAULT_BUCKET_ID: WIN7_DRIVER_FAULT
BUGCHECK_STR: 0xFC
PROCESS_NAME: powershell.exe
CURRENT_IRQL: 0
ANALYSIS_VERSION: 6.3.9600.17237 (debuggers(dbg).140716-0327) amd64fre
TRAP_FRAME: fffff8800da2eea0 -- (.trap 0xfffff8800da2eea0)
NOTE: The trap frame does not contain all registers.
Some register values may be zeroed or incorrect.
rax=fffffa80070f3648 rbx=0000000000000000 rcx=fffffa80070f3648
rdx=fffff8800da2fbf8 rsi=0000000000000000 rdi=0000000000000000
rip=fffff80001680b80 rsp=fffff8800da2f030 rbp=fffff8800da2fbd0
r8=fffff8a01804c680 r9=fffff8800da2fc68 r10=fffffffffffffffd
r11=fffff8800da2fa90 r12=0000000000000000 r13=0000000000000000
r14=0000000000000000 r15=0000000000000000
iopl=0         nv up di pl nz na pe nc
nt!KiPageFault:
fffff800`01680b80 55              push    rbp
Resetting default scope
STACK_COMMAND: kb
FOLLOWUP_IP:
nt! ?? ::FNODOBFM::`string'+44dfc
fffff800`017008b8 cc              int     3
SYMBOL_STACK_INDEX: 1
SYMBOL_NAME: nt! ?? ::FNODOBFM::`string'+44dfc
FOLLOWUP_NAME: MachineOwner
MODULE_NAME: nt
IMAGE_NAME: ntkrnlmp.exe
DEBUG_FLR_IMAGE_TIMESTAMP: 531590fb
IMAGE_VERSION: 6.1.7601.18409
FAILURE_BUCKET_ID: X64_0xFC_nt!_??_::FNODOBFM::_string_+44dfc
BUCKET_ID: X64_0xFC_nt!_??_::FNODOBFM::_string_+44dfc
ANALYSIS_SOURCE: KM
FAILURE_ID_HASH_STRING: km:x64_0xfc_nt!_??_::fnodobfm::_string_+44dfc
FAILURE_ID_HASH: {aa632d36-b0f7-67cf-89e2-1cec389c0a11}
Followup: MachineOwner

Hi Kaysel_GTG,
Just addition. Regarding to Bug Check 0xFC, please refer to following article and check if can help you.
Bug Check 0xFC: ATTEMPTED_EXECUTE_OF_NOEXECUTE_MEMORY
By the way, since it is not effective for us to debug the crash dump file here in the forum. If this issues is a state of emergency for you. Please contact Microsoft Customer
Service and Support (CSS) via telephone so that a dedicated Support Professional can assist with your request.
To obtain the phone numbers for specific technology request, please refer to the web site listed below:
http://support.microsoft.com/default.aspx?scid=fh;EN-US;OfferProPhone#faq607
if any update, please feel free to let us know.
Hope this helps.
Best regards,
Justin Gu

How to run the Transaction Code - BIC for Bank keys uploading

Hi
How to run the Transaction Code - BIC for Bank keys uploading.
please give me suggestion.
Thanks
Indu

Go to BIC transaction screen
Fill the selection screen parameters as below
1. Update Run (Test Run: Check Off: Real Run:Check On)
2. Set Deletion Flag (Check On)
3. Maximum no. of records: 999999
4. Detail List (Check On)
5. Display variant: 1SAP
6. Presentation server (Select Radio Button)
7. Application server (Deselcet Radio button)
8. File name and Path: Select relavant file which is to be upload
9. Bank country: If needed (Give respective country name)
10. Select execute button or F8
NOTE: Make sure that before executing run execute TEST RUN by deselecting Update Run check box
Hope this will meet your requirement
Thanks.

Need help with how to reset bios and admin password to reformat hard drive in 8440p elitebook.......

need help with how to reset bios and admin password to reformat hard drive in 8440p elitebook? removal of cmos, resetting laptop, using cccleaner, windows password recovery and hiren's was noneffective, any help is appreciated. thanks

Hi,
As your notebook is a business class machine, security is more stringent - the password is stored in non-volatile memory and there are no 'backdoor' passwords. Your best option would be to contact HP regarding this.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

I have an itouch, most songs i got off my cd's. i have a new laptop and want to put songs from itouch to laptop.I can only get the songs that i purchased onto the laptop? need help with how to get the rest from itouch to laptop please??

i have an itouch, most songs i got off my cd's. i have a new laptop and want to put songs from itouch to laptop.I can only get the songs that i purchased onto the laptop? need help with how to get the rest of the songs (from my cd's) from itouch to laptop please??

See this previous discussion:
Recovering your iTunes library from your iPod or iOS device: Apple Support Communities

I need assistance with uploading pictures from mobile connection to computer

I need assistance with uploading pictures from my mobile to my computer

I need assistance with uploading pictures from my mobile to my computer

My wife was given a 5s and she sent her 4s to her daughter in Thailand to use. The problem is the 4s needs to have the imei number unlocked. We need assistance on how that can be done. We are long time Verizon customers.

My wife was given a 5s and she sent her 4s to her daughter in Thailand to use. The problem is the 4s needs to have the imei number unlocked. We need assistance on how that can be done. We are long time Verizon customers.

Your daughter will have to send it back to you. You will have to reactivate it on you line. You will then have to request to have it unlocked. See THIS thread for more information.

I need assistance with changing language from German to English

I need assistance with changing language from German to English. Unable to uninstall product from control panel.

What exactly means "unable"?
Since you mention Control Panel, I assume that you are on Windows. Try using http://labs.adobe.com/downloads/acrobatcleaner.html

NAV 2013 R2; How to run a customized report (206 sales invoice) in the classic client

Hello, in preparing a newly installed NAV 2013 R2, I'm questioning the following:
In the Development Environment I have customized report 206 Sales - Invoice in the Design menu View Layout with the space of the logo (by Microsoft SQL Server Report Builder) and
finally saved and compiled.
When I do run it connects to the server of what I call the classic client or the real NAV 2013 R2 and I can select a posted sales invoice to show the new layout and the result is
fine as customized as I wanted.
When I later ordinary print one of the posted sales invoices this customized logo layout doesn't appear on the print. I print in PDF and paper. When I make a next new sales invoice
this new layout is not in use either.
Another thing is run print started from the Development Environment is called Sales - Invoice in the header and not just Invoice that it the name when printing when invoicing and
printing of posted documents.
Additionally this form of Sales - Invoice shows our company details and good information as web, e-mail, bank account and bank name that is well demanded on a perfect invoice.
How to get these informations out normally?
Is the classic client having a wrong report as sales invoice?
How to run a customized report (206 sales invoice) in the classic client NAV 2013 R2?
It is like the customized report (206 sales invoice) is not in use yet in the classic client.
All you wise people out there are welcomed to help me now
Best regards
Carsten

Try on Dynamics Community forum: https://community.dynamics.com/nav/f/34.aspx

How to run non-customised report from command prompt to gen trace file?

Hi
how to run non-customised report from command prompt to gen trace file?
EBS R12 RUP6.
RHEL5
rgrds

Hi,
See (Note: 285497.1 - Rwrun.sh Does Not Generate Trace Output Using TRACEOPTS in Command Line) and/or (Note: 737445.1 - R12 Concurrent Requests Run Forever; rwrun Errors REP-50125) for the command you need to use.
Thanks,
Hussein

How to take unreconcilled transactions report for a date range ?

hi all,
How to take unreconcilled transactions report for a
data range ?
we have taken unreconcilled transactons from
external reconcillation using filter option mentioning
range of dates,But when we take print out using PLD,
it showing unreconcilled transactions for all dates.
But our client requires it as a standard report from SAP ?
Our client is using SAP B1 2005B PL39.
Jeyakanthan

Hi
Financials -> Financial Reports -> Accounting -> General Ledger.
In the 'Display' dropdown select, 'Unreconciled' .
Hope this should help you.

How to run a 10g report in batch mode.

Good Afternoon,
Please advise if there is a way to run a 10g report from command line.
We use 6i right now and our job scheduler runs reports using "D:\ORADEV6I\BIN\RWRUN60.EXE ..." executable in batch mode on a separate server. We plan to migrate to 10g Database, Forms, Reports. Is there a way to keep this functionality and create a "command" to request the report server to run a report?
Thank you,
Dmitri

For those of you interested in following this refer to the same thread in the Reports Forum:
How to run a 10g report in quiet\batch mode

How to run the 9I report from the forms menue 9i

how to run the 9I report from the forms menue 9i.
Shehzad Latif

Hi,
1. create a Reports Object node in Forms. If you use teh same object node name then you can write generic code that works in all Forms
2. Get the whitepaper about Forms/reports integrtion
http://otn.oracle.com/products/forms/pdf/frm9isrw9i.pdf
Frank

Need assistance with how to run a transaction report

Similar Messages

Maybe you are looking for