Need Avg sales for 90 fiscal days - thru customer exit or Offset ? ? ? ?

Hi Frns!
My current report generates daily sales for fiscal period using a customer exit variable A.
My requirement now is to have one more column having Average sales for 90 prior fiscal days when i enter a fiscal period thru the same variable A.
As the customer exit variable is of Selection Options, I'm unable to create Offset for the same.
Guyz do need ur help on this urgently.
Cheers! Shana

Any updates !!!!!!!!!!!!!

Similar Messages

Number of working days in customer exit?

Hi, this is actually an extension to the following thread.
How to calculate number of working days
I have very similar requirement. Determine the number of working days (excluding weekends and holidays) from 2 given dates. But the difference here is that, one of the date in the calculation is the current date.
1: Creation Date - this is present as infoobject in the ODS.
2: Current Date - this is 'today''s date.
And, No. of Working days(Zworkdays) = Current Date - Creation Date.
So, as mentioned in the thread 305257 speaks about including the logic in the update rules, I can use system variable sy-datum to get the current date in update routine. But if the load is not scheduled for every day (say,once in 2 days), then when i report this infoobject Zworkdays on Day2, then it will hold Day1 calc rite?
PLease correct me if I am wrong.
Could you please help me with other approachs I can follow. One I can think is Customer Exit in Bex for the same.... but I am not sure how to do the same (i am new to Bex and Customer exit). Could any one of you please guide me how to achieve the same. I Have 0CalDate in the ODS also.
Any other ideas/inputs is greatly appreciated.
Thanks in advance
Ramya

Hi,
search for virtual key figures.
Rgds.
Juergen
P.S. Thanks for assigning points
Message was edited by:
Jürgen Hemelt

How to use Multiple Single Option for selection in the Customer Exit

Hi,
How can we handle the multiple single values in the customer exit variable.
I have a requirement which is as follows -
Table A fiields -> Field Coach, Partner 2, Relation between PArtner 1 & Partner 2, Valid from, valid to date.
Table B -> Service Month, Start Date, End Date.
Table C -> Billing Date, Execution Partner,cal month /year.
For the Field coach in TABLE A, multiple Partner 2 are present.
Report has to be built on Table C.
User inputs the Service month and Field Coach . User can enter multiple field coach values.
For the All the Field Coach values entered, corresponding Partner2's have to be found from Table A and to be passed to the Execution Partner in Table C.
Now if we want to use customer exit variable on the field Execution Partner, how can we handle the Multiple Single selections in the customer exit.
Thanks,
Shubham

Hi,
While creating the variable you must have to specify multiple value.
In customer exit
write code multiple times and append the values.
For example:
when 'variable'.
l_s_range - sign = 'I'.
l_s_range - OPT = 'EQ.
l_s_range - LOW = EXECUTION PARTNER 1.
APPEND L_S_RANGE TO E_T_RANGE.
l_s_range - sign = 'I'.
l_s_range - OPT = 'EQ.
l_s_range - LOW = EXECUTION PARTNER 2.
APPEND L_S_RANGE TO E_T_RANGE.
l_s_range - sign = 'I'.
l_s_range - OPT = 'EQ.
l_s_range - LOW = EXECUTION PARTNER 3.
APPEND L_S_RANGE TO E_T_RANGE.
Regards,
Ranganath.

Need clarification on BEX variable usage in customer exit.

hi,
i am an ABAP guy,i dont have any idea about BW,But here i got one problem,
1)Variable has been craeted in BEX Report (processed by Customer exit).
2)i am trying to write ABAP code in CMOD customer exit(ZXRSRU01),but when i am calling BEX variable it is not taking it is giving error(it should defined by data statment)so how to call the bex varible in Customer exit,if any body have sample code or any idea kindly let me know.

Hi and welcome to SDN!
there are a lot of examples and clarifications in these forums. For instance:
Re: steps for a customer exit.
Re: Regarding the Code for the Customer Exit
Best regards,
Eugene

Customer Exit with offset as input to other Customer Exit variable?

Hi Experts
I have a query which uses a Customer Exit variable "A" with an offset. My problem is then that I would like to use the outcome of "A"+offset as input for another Customer Exit variable "B" in the same query.
Is this possible somehow?
Summing up by example:
Lets say that A return 001 and the offset is 3, then we got the value 4.
Can I somehow get this value (4) and use it in another Customer Exit variable in the same query?
Kind regards,
Torben

Sure
I have 12 rows in a query. One for each month.
Each row is restricted on cust exit A and cust exit B.
A has an offset - the offset is the number of the month, which means 1 for January, 2 for february and so on. Cust exit A returns 001. So the value for Januar is 002, February is 003 and so on.
In cust exit B I need to get the result of cust exit A+offset. 002 for January, 003 for February and so on.
So, how do I get the A+offset for each row?
Kind regards,
Torben

CRM e-Commerce - Need internet sales for Pharma

Hello All,
My pharma company is in need of an online ordering system. We use SAP ECC 6.0 currently and need more information
on how CRM for internet sales can be used with external customers for placing pharma orders.
Any information is appreciated.
Thank you,
LCP

With ECC 6.0 you can implement E-Commerce (Internet Sales) with ERP and create a new ordering channel for your customers. The orders will be created directly in the ECC 6.0 system. This is the quickest path to the customer.
Optionally, you can have CRM and there are more scenarios involving CRM and ECC. However, the new erpcrmstandard scenario lets one use CRM catalog, yet create orders directly in ERP, thus avoiding any complex pricing conversion to Java in CRM.
Since erpcrmstandard uses the configuration and pricing in ECC 6.0, and since there is no need to download the complex pricing in CRM, you can explore if that can help you.
Easwar Ram
http://www.parxlns.com

No change to financial summary or a single sale for 2 days

Can the above be correct. Downloads are showing but have never gone 2 days without a single sale before?
Malcolm Bain
Malcolm Bain

Hello Malcnoo,
If you are still experiencing this issue please contact Dev Center Support for assistance.
-Miles
Windows and Windows Phone Dev Center Support
Send us your feedback about the Windows Platform

Need trial extension for 14 days till I get student ID

The title says it all, could I extend the Mac trial license before I get the ID with which I could buy some of the student bundles? I need it ASAP.
Thanks

Hi Mraak,
You'll probably need to go the Support site for that:
http://www.adobe.com/support/
This is a User forum, so the Adobe folks who respond up here are generally Engineers like me who follow the forums in their spare time, not part of Adobe's formal Support Team. For licensing and account assistance, you'll generally need to go through the Support folks.
-Chris

Calculate sales for last 60 days

hello
want to make key figure or formula, which calculate sales for last 60 days, but also i need to add week group in report, so for each week i need sum sales for last 60 days before this ...
is any solution to that?
thank you.

Alex,
I'm not very clear on what you are asking.
If you use your time parameters in selections you can use caldays and weeks with your key figures.
ie. Selection 1 has your key figure and calday restricted t the last 60 days.
Selection 2 has your key figure and Fiscal Week but I am not clear on the range required for fiscal week.
Regards
Gill

How to capture user input for customer exit processing?

I need to calculate the number of working days elapsed in the current fiscal quarter BASED on the USER INPUT on the reporting front. i.e., say the fiscal quarter started on 1 July 2005 and if the user enters 10 July 2005, I should get the value 8 (Assume that Monday through Friday are all workdays). If the user enters 12 July 2005, I should get 10. I have written customer exits and know how to use factory calendar, but THE CHALLENGE is how do I CAPTURE the user input and use it in my exit? During the varible definition, if I select the check box "Ready for input" then the customer exit is not being processed and unless I check that box I can't get a user entry! If I look at the import values in the customer exit, I see i_t_var_range with type rrs0_t_var_range. My strong feeling is that this parameter gets the user input, but I am unable to use it as the customer exit is not being called if I make the user to input the data. Based on the empirical evidence, I felt that user input and customer exit can not co-exist!! Please somebody prove me wrong and let me know how can I use the user input to process my "customer-exit" variable. I would really appreciate any input from the BW community here.

Hi Sameer,
Most likely, I'm missing something, but I think that the answer is very simple.
CASE I_VNAM.
WHEN 'YOUR_CUSTOMER_EXIT_VAR'.
IF I_STEP = 2. After selecting of input variable
LOOP AT I_T_VAR_RANGE INTO LOC_VAR_RANGE
WHERE VNAM = 'USER_INPUT_VAR'.
CLEAR L_S_RANGE.
L_S_RANGE-LOW = LOC_VAR_RANGE-LOW(4).
APPEND L_S_RANGE TO E_T_RANGE.
ENDLOOP.
ENDIF.
ENDCASE.
In this typical user exit coding you have a user entered value in LOC_VAR_RANGE (originally in I_T_VAR_RANGE) and you construct your user exit variable value in E_T_RANGE.
Best regards,
Eugene
Message was edited by: Eugene Khusainov

How to create an user input variable for customer exit variable? - BW3.5

Hi Guru,
I have a requirement for the selection period of my reports. There are 3 possible reporting periods which should be user selectable:
1. Month: Current reporting month
2. Fiscal Year to Date
3. Project Year to Date
Here I need 2 variable to do these, 1 customer exit and 1 user input variable. I have created a variable customer exit to calculate all these requirement. But can any1 tell on how to create the user input variable for my customer exit? I need a user input variable with drop down list like below.
01-Current month
02- Fiscal Year to Date
03-Project Year to Date
I have create a new master data for this variable, but it's not working. What I need now is a standalone master data which do not need to link to any exiting records. Can any1 tell me how to create this?

Just go to the definition of the variable for which you have created a customer exit. There you will find a check box for "Ready for Input". Just tick that checkbox and the variable will be available as a selection variable in the reports selection screen.
Regards,
Yogesh

Customer exit code to populate three month's fiscal period

Dear frns,
I need an ABAP customer exit code to populate three month's fiscal period.
Please update on this...thanks
Cheers! Shana

Dear,
Thank u for all replies.
My requirement is simple.
Rows:
Fiscal Year
Columns
GR Value
Filters
Material Number
Input Paramters:
Material No.
Fiscal Year
Using customer exit if we populate current fiscal year in the selection screen output be like this....
FISCAL YEAR    GR Value(in crores)
2009                     4000
2008                     3000
2007                     2000
2006                     1000
The cube name Custom Cube ZBBP_C03.
But I dont have time char 0FISCYEAR in my Cube.In my cube avaiable chars are Calender Year,Calender Year/Month,Calender Year/Quarter,Fiscal Period
Please let me know if you need any information.
Waiting for replies,
Thanks & Regards,
Praveen.K

Customer exits for currency field in generic extractor

Hi,
I had a requirement to create a generic extractor. I've created a generic extractor by name 'ZXXZ_XXX_TAX_ATTR'. This extractor was created based on a table T007V in turn view. It has a currency and a quantity type field. Those two fields were not refering to a table fields but were refering a structure. So as per the note 335342, if we have fields of curr/quan type and are having reference fields as a structure field, we need to populate those fields throught a customer exit.
As I have read that the same problem has been solved by you with customer exit. So can you mail me the exit code as I am not a good in ABAP.
Regards,
Amol Gaurkar

Hi Amol,
Here is the code below,
TYPES: BEGIN OF TY_T007V,
 TRKORR TYPE TRKORR,
 ALAND TYPE ALAND,
 MWSKZ TYPE MWSKZ,
 TXJCD TYPE TXJCD,
 DATAM TYPE DATAM,
 KSCHL TYPE KSCHL,
 KBETR TYPE KBETR,
 END OF TY_T007V.
DATA: T_T007V TYPE STANDARD TABLE OF TY_T007V,
 T_EXTRSTRU TYPE STANDARD TABLE OF <Extract Structure>,
**-- Work Area
 W_T007V TYPE TY_T007V,
 L_TABIX TYPE SY-TABIX.
CASE I_DATASOURCE.
 WHEN 'ZXXZ_XXX_TAX_ATTR'.
 REFRESH: T_T007V.
 CLEAR: W_T007V,
 L_TABIX.
 T_EXTRSTRU[] = C_T_DATA[].
 IF NOT T_EXTRSTRU IS INITIAL.
Fetching all the records into internal table T_T007V from the transparent table T007V
 SELECT TRKORR
 ALAND
 MWSKZ
 TXJCD
 DATAM
 KSCHL
 KBETR
 INTO TABLE T_T007V
 FROM T007V
 FOR ALL ENTRIES IN T_EXTRSTRU
 WHERE TRKORR = T_EXTRSTRU-KOKRS
 AND ALAND = T_EXTRSTRU-ALAND
 AND MWSKZ = T_EXTRSTRU-MWSKZ
 AND TXJCD = T_EXTRSTRU-TXJCD
 AND DATAM = T_EXTRSTRU-DATAM
 AND KSCHL = T_EXTRSTRU-KSCHL.
 IF NOT T_T007V IS INITIAL.
 SORT T_T007V BY TRKORR ALAND MWSKZ TXJCD DATAM KSCHL.
 LOOP AT T_EXTRSTRU INTO W_EXTRSTRU.
 L_TABIX = SY-TABIX.
 READ TABLE T_T007V INTO W_T007V
 WITH KEY TRKORR = T_EXTRSTRU-KOKRS
 ALAND = T_EXTRSTRU-ALAND
 MWSKZ = T_EXTRSTRU-MWSKZ
 TXJCD = T_EXTRSTRU-TXJCD
 DATAM = T_EXTRSTRU-DATAM
 KSCHL = T_EXTRSTRU-KSCHL
 BINARY SEARCH.
 IF SY-SUBRC = 0.
 W_EXTRSTRU-KBETR = W_T007V-KBETR.
 MODIFY T_EXTRSTRU FROM W_EXTRSTRU INDEX L_TABIX.
 CLEAR W_EXTRSTRU.
 ENDIF.
 CLEAR: W_T007V,
 L_TABIX,
 W_EXTRSTRU.
 ENDLOOP.
 ENDIF.
 REFRESH C_T_DATA.
 C_T_DATA[] = T_EXTRSTRU[].
 REFRESH: T_T007V,
 T_EXTRSTRU.
 ENDIF.
ENDCASE. "ENDCASE FOR RETREVING THE EXTRACTOR
Reward points if this helps,
Kiran

HT204074 why itunes match cannot associate that device or computer with another Apple ID for 90 days.

i have two country ID. i bought several songs in US then download it. i try to add the music in my TW itunes match but cannot use and need to wait for 90 days. how to combice two country music together?

I have actually been using Amazon cloud for a while now and never had this problem. Actually, I think I did get locked out once and was able to get back in by contacting support and answering some questions. This option isn't available with Apple.. They lock you out for 90 days regardless of whether you can verify your ID. I know this because I contacted them recently and they verified my identity exhaustively and then said 'sorry-there's nothing we can do and you are not getting a refund for time lost.' I think I understand why the policy is there, but I think it's ridiculous that they make no exceptions even when the mistake is on their side, which I'm pretty sure it is in my case.

Bex Customer Exit: I_STEP 2,3 are not getting called up?

Hi All,
I need a small help in BEX variable customer exit. I am trying to give an error message on what user had entered on the selection screen. I kept several breakpoints. But I understand that this particular code is calling up only when 'I_STEP = 1'. For I_STEP 2 and 3, the follwong code is not being called? I have seen so many validations happening on user entered values with error messages.. But I am not sure where I am missing?
Here is my sample code.. can any one extend the help?
The original requirement is to 'modify' what user had entered. But I understand that SAP is not allowing to modify what user had input.. So thought of giving a small error message.. and not able to do that also.. so I am in this Forum..
thanks,
Hari
When 'ZCATID2'.
*data : l_year1(4) type n,
 l_year2(4) type n,
 l_text(12).
data: l_cat(10).
*IF I_STEP <> 2.
*RAISE no_processing.
*ENDIF.
IF I_STEP EQ 3.
break-point.
READ TABLE I_T_VAR_RANGE WITH KEY VNAM = 'ZCATID2'
INTO LOC_VAR_RANGE .
if LOC_VAR_RANGE-LOW CP '*'.
message i999(zz) with 'Test'.
endif.
break-point.

Thanks Roberto for this good document to clear my fundamentals. I think I understand the mistake on my code.
Thanks verymuch for your timely help.
Best Regards,
Hari
( I looked to give more points to you but it allwoed me only 10 points to give you.). Have a nice day!!

Need Avg sales for 90 fiscal days - thru customer exit or Offset ? ? ? ?

Similar Messages

Maybe you are looking for