Need B net access number..... i think they r 6000, 6012-6016.......

I was just wonderin if they r right..... and how to let gaming access to b net so i can play diablo.

Hi, please specify as to what exactly you are looking for.. the router details..the issue you are facing

Similar Messages

URGENT: Need to change my access number (moved to ...

I had a US access number. I now live in France and need a French access number. How can I do that? I need to make this change very quickly (within next 45 min, if at all possible). Thanks. Sophie

sophie_remec wrote:
I had a US access number. I now live in France and need a French access number.
Please file here:
https://support.skype.com/en/faq/FA1170/How-can-I-contact-Skype-Customer-Service
TIME ZONE - US EASTERN. LOCATION - PHILADELPHIA, PA, USA.
I recommend that you always run the latest Skype version: Windows & Mac
If my advice helped to fix your issue please mark it as a solution to help others.
Please note that I generally don't respond to unsolicited Private Messages. Thank you.

Skype Access Number in Zurich Switzerland

I am going to Switzerland and will get a cell phone and SIM card once there in Zurich.
I want to use my current Skype account and have calls while there charged to the existing account.
Can I do that?
Also need the Skype access number in Zurich.
Thanks,
Mr. Gamble
[Mod edit: Please do not include personal/private information when making a public post. Thanks!]

same here. Since a couple of days ago Skype to go number gives busy signal when called from a registered landline phone (worked before). When called from a registered mobile phone it gives 2 clicks and that's it.
Incidentally at the same time we changed the cable TV/internet equipment, but that shouldn't have anything to do because the lindline phone is on copper wire.
I must be a general Poland issue.
------------ UPDATE -------------
I have heard from the horse's mouth. My chat with nice people from Skype support (aka Microsoft) indicates that, as far as I understand it, the problem lies most probably with the provider (in my case Orange Polska, former TPSA). They may have changed the policy (no more Skype access and maybe also other ways of circumventing their revenue stream) or it is an instance of traffic shaping, which hopefully is temporary. It was also suggested to me to try changing the access number altogether, although without guarantee of successful resolution.
Guys please report back on this thread as the situation changes!
Usual disclaimer:
Only my case has been discussed and Sype's suggestions may be not applicable to others.

Do i need a different access numbers for each coun...

Hi, If I am in Chile and want to call home (Australia) do I need a Chile access number OR is the Australian access number sufficient? If I need the Chile access numebr hw do I get that?
Cheers

Welcome to the Apple Support Communities
If all of those Macs are for your use, you have to use the same Apple ID on all of them, so you will be able to use all the applications and songs purchased with your Apple ID on them, apart from your iCloud information, in case you have an iCloud account

I got ipod in a public toilet but no one is there to ask who owns it. it has pass code so i cant access her/his info. so i decided to keep it and use it. i want to reset the passcode. do you think they can track it and know whos using it?

i got ipod in a public toilet but no one is there to ask who owns it. it has passcode so i cant access her/his info. so i decided to keep it and want to use it. i want to reset the passcode so that i can change the settings. do you think they can track it and know whos using it?

Hand it to the police and if nobody claims it maybe they will let you have it. The person who loss it will be grateful.

I am sending text messages to some people who think they come from my husband. Also evertime I send a text to my husband, a copy is sent to me too.

I am sending text messages to some people who think they come from my husband. They have both my name & number and my husbands name and number in their contacts. Also everytime I send a text to my husband, a copy is sent to me too. I do however receive text message from people to my phone and it seems to work fine if they do not have my husbands info.

You don't necessarily need separate AppleIDs, but you need to set the Send and Receive for Messages to different addresses (Settings App > Messages).

Outlook Voice Access number

Hey guys,
I've also posted on Exchange 2013 but no one answered me there.
I'm trying to integrate Lync 2013 with Exchange 2013 and i have a coupe of questions:
1. Can i use extensions for my Outlook Voice Access/Auto Attendant numbers? for example: +40756191140;ext=100 and +40756191140;ext=101 . All the users have non-DID numbers and they can contact each other internally with a 3 digit extension. I want to
set up the Outlook Voice Access/Auto Attendant numbers in the same way. Is it possible to enter these numbers like in the example?
2. What is the "E.164
routing numbers for your SIP server" above the Outlook Voice Access numbers? Do i need to enter an extension for this too? Can it be the same as the Outlook Voice Access number?
I would really appreciate some help regarding these 2 questions.
Thanks

You could use "+100" for example. In the dial plan, create normalization rule to add "+" to the three digits you use and make it first (or at least above the general rule for three digit extensions.)
If/when you implement EV, when call to the main number arrive on the gateway, you can transform it to "+100" and then send it to Lync. Of course, it is another question that with one PSTN number
only, you must make a choice which service you want to make available to PSTN. Or... you could configure this for AA and have an option for Outlook Voice Access.
Drago
http://www.lynclog.com

I used to be able to download temple run onto my iPod 2nd generation. I then had to restore the iPod but now I can't re-download temple run onto it. It says you need a higher ios number. Is there anything I can do to get it back?

I used to be able to download temple run onto my iPod 2nd generation. I then had to restore the iPod but now I can't re-download temple run onto it. It says you need a higher ios number. This is the same with many other apps as well and not just temple run. Is there anything I can do to get them back?

So, you need an older version of the iOS app, because the current version no longer works on your iPod touch.
If you do regular backups of your hard drive (as you should), such as by using Apple's built-in Time Machine (if you use a Mac), you may find the older version of the app in the backup archive, and restore it (replacing the newer version). They are stored in the iTunes Media folder, in the Mobile Applications sub-folder. You should then be able to sync the older version to your iPod touch.
I can't think of any other way to get it back...
NOTE: An 2nd gen iPod touch can run up to iOS 4.2.1. If your iPod touch is running something earlier, and that is why the app no longer works, you can also consider updating the iPod's iOS.
I use an even older iPhone (original). I avoid this potential problem by aways updating its apps on the iPhone, not in iTunes on the computer. When I do it on the iPhone, it will not download a newer version of an app that won't run on my old iPhone.

Since the last upgrade i cannot log onto my internet banking. It won't accept my usual access number or format

I can no longer log in to my internet banking. it keeps asking me to use the correct format in my access number, but i haven't changed anything. I have spoken to my bank and they said that it is an issue with the latest Firefox update and that Firefox are aware of it. I just need it fixed or i will have to go back to a previous version of Firefox.

I use only support.mozilla.org and never used any other websites. However, the same problem here. My ID and Password are not accepted. Had to create a new account with a temporary email to use Support - it would not allow me to use my main email, because "it is used by another account". Try to reset password - receive no email (even though there is a confirmation on the website that email to reset password has been sent). At the same time can easily receive a confirmation about User ID and account activation. Thus, the account is completely locked, and I can not use my email address for a new one. Please fix this problem.

Airport extreme connected to Time Warner works fine.Added airport to extend signal, as net access poor in bedroom, not that far away, but doesnt help

Airport Extreme does great job off the Time Warner cable modem. Net access has been weak in the bedroom about 30 feet away and around a corner. Sdded airport as aan extender midway between but net access still bad. Tried moving the airport closer to bedroom and even in bedroom but still net signal from the modem is weak. Madenng. Do I need a second Extreme?

This is a good news and bad news situation.
The good news is that the type of insulation likely installed in the walls of your home has a metal foil layer on at least one side of the insulation and probably both. So, you have good insulation.
The bad news is that this type of insulation will block most of the wireless signal that is trying to pass through. So, I doubt that an AirPort Extreme as an extender will do significantly better than the AirPort Express. If the store will allow you to return the Express and try an Extreme though, it could not hurt to try.
It might work better, and might not. The only way that you will know for sure is to try it out in your home.
If the Extreme still does not do the job, then you will need to look at running an Ethernet cable from the "main" AirPort Extreme to the bedroom. An electrician can do a nice job of hiding the wires....if you do not want to do this yourself......but the cost may be steep depending on the number of obstacles involved.
A possible option, if the Ethernet cabling cannot be run, is to take a look at pair of Ethernet Over Powerline (EOP) adapters to send the signal over the AC powerlines in your home. The theory with these devices is that you already have the wiring in place.....you just need the adapters. In practice though, things do not always work as well as the theory might suggest, so if you decide to try EOP adapters, it would be a good idea to understand the store's return policy in advance before you buy.

N8 application net access permissions

Accidentally hit 'Connect Automatically' when prompted by the Email program. I like to keep all progs on 'Connect This Time'.
I like to be asked, always, by every program trying to access the net - so i can control all net access, and also so i can keep battery usage low...
How can i change this?Is there an individual setting for each program to know if it has permission to connect to the net?
I already have Switch to WLAN set to Manual, Data Use in Home Network set to Always Ask, and Data Use when roaming set to Always Ask... and Packet Data set to When needed, with no access point defined.
thanks!!!

The solution is not very intuitive
You'll have to set the browser's internet option to 'always ask'. What I've seen is that all native, i.e. non Java apps take their cue for the access point to use from the browser (Suite settings only applies to Java apps, you'll know something is a Java app because it has a different icon in the application manager). So if you set the browser to 'always ask', then every other preinstsalled internet app (that doesn't explicitly have a connection configuration option) will also use the same thing.
The above doesn't apply to 3rd party apps like Nimbuzz, since they have their own settings for access point selection.
I'm using a Nokia N8-00 with PR1.1

I accidently click on ''Import the list'' but now all the music have an exclamation point I think they are all in Musique.txt on the desk... How can i take back these music on my library? I tried : Import the list and take Music.txt , but it do not work

I accidently click on ''Import the list'' but now all the music have an exclamation point I think they are all in Musique.txt on the desk... How can i take back these music on my library? I tried : Import the list and take Music.txt , but it do not work

Ok, I had a glitch, forced to restart, and lost my train of thought.
Reinstalling iTunes should fix the major issue that might have gone wrong, perhaps your explaination points will disappear and everything will be peachy again.
But if they don't, you can open the XML file in iTunes Folder using a Text edit program to see what the common pathname is to the iTunes Music folder or where your content is located.
If you moved the itunes folder, it needs to go back.
I can't download iTunes to my Vista virtual machine to test it out right now because iTunes is down, so I can't verify the pathname, perhaps your issue and the iTunes being down are related somehow?
You don't want to import all your music again, but it's a option, but you lose all your playlists, that's what I'm trying to recover.
If oyu don't have a whole lot of playlists, then simply select all the explaimation point music and delete, select File from the menu and import your itunes folder again.

I have 2 iphones, one for personal and one for business. I need my phones not to sync otherwise they will both ring all the time. How can I log out of my icloud and unsync my phones?

I have 2 iphones, one for personal and one for business. I need my phones not to sync otherwise they will both ring all the time. How can I log out of my icloud and unsync my phones?

Syncing your phones to the same iCloud account won't cause them to both ring all the time, it only puts the same contacts, calendars, and other synced data on the phone. The phones will only ring with someone calls the number associated with the phone.
If you want to stop using iCloud on one or both of the phones, go to Settings>iCloud, tap Delete Account, then choose Keep On My iPhone when prompted. This will disconnect them from iCloud and keep a copy of the synced data on the phone.

WHY WE NEED TO ADD PORT NUMBER 1433 TO TCP/IP PROTOCOL INSTEAD OF UDP PROTOCOL

HELLO EVERYONE,
WHILE INSTALLING SQL SERVER I HAD ENCOUNTERED A WARNING MESSAGE REGARDING WINDOWS FIREWALL. AFTER SOME RESEARCH , I GOT TO KNOW THE STEPS TO TROUBLE SHOOT. IT SAYS I NEED TO GO TO WINDOWS FIREWALL AND ADD THE PORT NUMBER 1433 IN INBOUND & OUTBOUND
SECTION USING THE PROTOCOL- TCP/IP & 1434 TO INBOUND & OUTBOUND OPTION SECTION USING THE PROTOCOL OPTION - UDP.
I WANT TO KNOW CAN I ADD THE PORT NUMBER 1433 USING UDP PROTOCOL INSTEAD OF TCP/IP PROTOCOL IN FIREWALL SETTINGS ; IF NO THEN WHAT IS THE REASON?
AND WHY CANT WE HAVE USE ONE PROTOCOL : TCP OR UPD AND ADD THE PORT NUMBERS 1433 & 1434 FOR ACCESSING SERVER & SQL BROWSER SERVICES ?
PLEASE HELP.
THANKS , SAURAV GHOSH
saurav ghosh

We need to understand how the firewall setups are done in your environment like might be some restriction is there also need to check if IP level access are there for you or you need to get that.
Usually in secured setup, for your application, you need to get access on IP and Port to access database server. This is good also but may be more restriction you can bring in.
Also to update in inbound and outbound, is required too at times when you have firewall services on as this is being disabled\stop too in many setup due to application level functionality issues too.
You can definitely go ahead and add these ports, this will not disturb you environment as you are just giving access to sql server available on host which is accessed, how? you need to check, may be your application is accessing through IP not name, application
will look for Port on this IP.
Check some details about it:
http://www.bleepingcomputer.com/tutorials/tcp-and-udp-ports-explained/
Also:
TCP 1433
TCP port 1433 is the default port for SQL Server. This port is also the official Internet Assigned Number Authority (IANA) socket number for SQL Server. Client systems use TCP 1433 to connect to the database engine; SQL Server Management Studio (SSMS) uses
the port to manage SQL Server instances across the network. You can reconfigure SQL Server to listen on a different port, but 1433 is by far the most common implementation.
UDP 1434
UDP port 1434 is used for SQL Server named instances. The SQL Server Browser service listens on this port for incoming connections to a named instance. The service then responds to the client with the TCP port number for the requested named instance.
The SQL Server Browser service listens for incoming connections to a named instance and provides the client the TCP port number that corresponds to that named instance. Normally the SQL Server Browser service is started whenever named instances of the Database
Engine are used. The SQL Server Browser service does not have to be started if the client is configured to connect to the specific port of the named instance.
Understanding this requirement:
http://support.microsoft.com/kb/287932/en-us
Good link: http://msdn.microsoft.com/en-in/library/cc646023.aspx
Hope this helps.
Santosh Singh

I need a purchase order number immediately option in I-proc

Hello,
I created one catalog requisition in I-Proc, and checked " I need a purchase order number immediately" option during checkout. This requisition has been created and i even got message that "Purchase order number 45 has been reversed for you" With this being said...
1. Where can i see this PO number ( I approved above requisition, but i can not see this PO number in PO screen)...?
2. What does this purchase order number do?
Thanks
Deepak

Hi Depak,
Please check this doc...
PO Create Documents
Workflow File Name: poxwfatc.wft
This workflow manages the automatic creation of purchasing documents. The PO Create Documents workflow starts in Oracle iProcurement when you submit a
requisition associated with an existing blanket purchase agreement, contract purchase agreement, or catalog quotation in Oracle Purchasing. Customize the attributes in this workflow to fit your business needs.
The following table shows the attributes that you must consider:
1) Is Automatic Creation Allowed?
Please change to Y
AUTOCREATE_DOC Indicator (Y for Yes or N for No) of whether this workflow is initiated for all approved requisition lines.
Default value: N
2) Is Automatic Approval Allowed?
AUTO_APPROVE_DOC Indicator of whether the purchase order approval workflow is initiated automatically after this workflow.
Default value: N
Please change to Y
3) Should Workflow Create The Release?
CONT_WF_FOR_AC_REL_GEN Indicator of whether this workflow creates, releases, or leaves them to the buyer to create using AutoCreate in Oracle Purchasing.
Default value: N
Please change to Y
You can verify the changes through below query..
select rtrim(w.name) name,
w.text_default Value,
rtrim(w.item_type) item_type
from wf_item_attributes w
where w.NAME in ('AUTO_APPROVE_DOC', 'CONT_WF_FOR_AC_REL_GEN', 'AUTOCREATE_DOC')
Hope this will help.
Regards,
S.P DASH
Another quick question to you, you mentioned UNSPENT code in your queries.. I think it should be UNSPSC code...correct me if I am wrong here..

Need B net access number..... i think they r 6000, 6012-6016.......

Similar Messages

Maybe you are looking for