Need Base system driver / SD controller Driver for A30

Hello
I have just recovered this A30 - i had to use a different recovery disk as we had lost the original
The laptop is up and running all other drivers instyalled - i cant find the SD or Base sysrtem Driver anywhere on the net
Can anyone help?
thanks

Hello
Sorry but I have checked it right now and there are listed more than 100 files for Satellite Pro A30.
I really dont know what you mean with Base system driver but if you want to install the chipset driver you can find them there.
I am not sure but this unit has no SD slot and it is no necessary to install any SD driver. Am I right?

Similar Messages

I need the correct driver for an infrared remote control (ENE CIR receiver) for Pavilion DV4-2173nr

I need the correct driver for an infrared remote control (ENE CIR receiver) for Pavilion DV4-2173nr.
The receiver that came with my notebook is a black model one (see picture below), with the following information in its bottom label:
RC1762302/00
3139 228 50021
HP SPS: 435743-001
HP: HSTNN-PRO7
RC6 ir
CP06 60808 A 146218 REV. B
I never managed to make it work, from the very beginning. I know it is working, because I replaced the battery for a brand new one and it shows a blinking IR LED when I press any button and point it to a digital camera.
Searching for "ENE CIR receiver driver" is useless 'cause I received more than one hundred answers - I tried four of them but none worked so far.
So, instead of trying the whole bunch, I am crying for help - could someone please tell me which driver is the correct one for this remote model?
Thanks in advance and regards,
Mike
P.S.: I am using Windows 7 Ultimate 64-bit and Ubuntu 12.04 in this notebook

http://ftp.hp.com/pub/softpaq/sp46501-47000/sp46741.exe
File name:
sp46741.exe [1/1, 1.04M]
System requirements:
No additional prerequisites
Released:
2009-12-31
Version:
2.7.4.0 A
Compatibility:
Microsoft Windows 7 (32-bit), Microsoft Windows 7 (64-bit)
Fix/Enhancement:
Original Software/Drivers

Need sata f6 driver for neo 4 ultra (winxp 64)

or do u even need a f6 driver for windows 64?
yes i have a sata drive.

if you unrar the 64 bit drivers in a folder you get a folder ide
inside are 2 more folders
one says xp one windows 2000
best i can see you need to copy every thing in the xp folder to the floppy
except the raid utility folder
these are what it tells you to copy for 32 bit
Driver for Win2000/XP
Please copy CDROM:
nVidia\System\CK804\IDE\WIN2K or WINXP
disk1 file
idecoi.dll file
nvata.cat file
nvatabus.inf file
NvAtaBus.sys file
nvcoi.dll file
nvide.nvu file
nvraid.cat file
nvraid.inf file
nvraid.sys file
nvraidco.dll file
nvuide.exe file
txtsetup.oem file
so thats every thing bar the raid utility as i said

Base system driver request during Win7 upgrade

In updating from Vista to Win7 and following Toshiba update wizard everything seem to be going fine, and then just before it started the Win7 install it ask for base system driver.
I do not know where it is or how to get it, resulting in my being stuck between installations.

This must be smartcard driver card reader.
Can you please test it?

Need an instrument driver for Stahl product

Hi guys!
I need an instrument driver for the coil temperature measurement device ER-230.01B (company Stahl)!
Does anybody of you have this driver?
I have already searched in the NI Driver list and couldn't find it.
Thx,
Nobby

Hi Nobby_83,
Unfortunately we don’t have the driver for your Stahl device. You have to contact Stahl to know if they have the driver.
http://www.stahl.de/en/start.html
Benjamin R.
R&D Software Development Manager
http://www.fluigent.com/

I need an audio driver for Yoga 13 with Windows 7 Pro 64 bits English

Hi all,
I downgraded my Yoga 13 from Windows 8 to Windows 7 pro 64 bits, and ever since then I have a problem with my microphone.
Skype finds the microphone and can use it, calls are all working fine, but any other program using audio does not work with the microphone.
After troubleshooting, I concluded that I need to update the driver but I cannot find it. Anything that I find on the Lenovo support pages does not install (event the one found on this page: http://support.lenovo.com/fr/fr/downloads/ds002860).
After looking at this post: http://forums.lenovo.com/t5/Idea-Windows-based-Tablets-and/I-need-an-Internet-driver-for-Yoga-13-wit.... I figured I would to be provided with the link by someone from Lenovo support.
Here's the hardware ID of the soundcard: HDAUDIO\FUNC_01&VEN_14F1&DEV_506E&SUBSYS_17AAA001&REV_1000. In Windows it is recognized as High Definition Audio (in the device manager).
Thanks a lot for your help.

Hello,
From looking at the Yoga 13 Hardware Maintenance Manual and downloading the driver package from the Realtek Wireless LAN & Bluetooth Driver for Microsoft Windows 8 (64-bit) - IdeaPad Yoga 13 page and extracting (but not running) it to look at the contents, it appears the Yoga 13 uses a wireless LAN card based on Realtek RTL8732 chipset.
I would suggest that you try downloading the drivers, expanding, but not installing them on to a USB flash drive or SD card, then plugging that into the Yoga 13, running the Device Manager (filename: DEVMGMT.MSC), clicking on the appropriate entry for the wireless network adapter, selecting update, and then choosing the Browse my computer for driver software option, pointing that to the location of the unpacked drivers. Perhaps Device Manager will find the correct drivers to install that way.
Regards,
Aryeh Goretsky
I am a volunteer and neither a Lenovo nor a Microsoft employee. • Dexter is a good dog • Dexter je dobrý pes
S230u (3347-4HU) • X220 (4286-CTO) • W510 (4318-CTO) • W530 (2441-4R3) • X100e (3508-CTO) • X120e (0596-CTO) • T61p (6459-CTO) • T43p (2678-H7U) • T42 (2378-R4U) • T23 (2648-LU7)
Deutsche Community Comunidad en Español Русскоязычное Сообщество

NEED windows 8 driver for MSI fx400 plisss

I need windows 8 driver for msi fx-400 because MSI TDE technology, MSI GPU Boost technology, my power up, camera, and bluetooth not work, plisss i need it thanks

Quote from: flobelix on 17-January-13, 02:40:21
FX400 is not among the notebooks verified to work with Win8 (http://event.msi.com/2012/windows8/index.html). Therefor MSI won't provide any drivers or support for using Win 8 on this computer.

I need an instrument driver for Neocera LTC-21 Temperature Controller and am having problems sending the IDN? string to the same instrument.

Hi,
When I use the instrument wizard in LabVIEW 5.0, to indentify a device (Neocera LTC-21 Temperature Controller), I receieve the following error:
Error.
There was an error sending this string.
VISA error code returned was:
-1073807339
Error -1073807339 occured at VISA Read.
Possible reasons:
VISA: (Hex 0xBFFF0015) Timeout expired before operation completed.
Although, the manual for this instrument states that the response should be a string of characters in the form of "Neocera Model LTC-21 version".
Also, I do not have a driver for this instrument, inspite of checking on the NI Instrument
Divers Network and the company website(www.Neocera.com).
I would truely appreciate if someone can help me.
Thanks,
Kunal.

I could not find any drivers for that instrument. You may just have to make your own. As for getting the device to respond, there are a couple of things you can do. If you are using GPIB: First, you might want to just reset the device by turning it on and off. If there are other instruments on the same bus, make sure 2/3 of them have their power on. Try communicating with it through IBIC. Here is a page that will help.
http://www.ni.com/support/gpib/max/ibic.htm
IBIC communicates with the GPIB on a very base driver level and you set everything manually step by step, so you can see where the break down is. Also make sure you are entering the "*IDN?" and all other commands correctly. Check the device manual to see what commands it should respond to and if there ar
e any special settings you might need. If you are doing serial communication, you may want to check to see if you need a null modem cable for it to function. There also may be a dip switch on the device that switches between serial and GPIB communication.

I need an Internet driver for Yoga 13 with Windows 7 operating system

I downgrade my yoga 13 operating system from Windows 8 to Windows 7 because it has a confliction with my software that I need to use. After that, I cannot connect it to Internet. Does anyone know the driver that I can use for this circumstance please? I also have some unknow devices listed on the Device Manager such as SM Bus Controller, PCI Data Acquisition and Signal Proceussing Controller, USB Controller, etc.

Hello,
From looking at the Yoga 13 Hardware Maintenance Manual and downloading the driver package from the Realtek Wireless LAN & Bluetooth Driver for Microsoft Windows 8 (64-bit) - IdeaPad Yoga 13 page and extracting (but not running) it to look at the contents, it appears the Yoga 13 uses a wireless LAN card based on Realtek RTL8732 chipset.
I would suggest that you try downloading the drivers, expanding, but not installing them on to a USB flash drive or SD card, then plugging that into the Yoga 13, running the Device Manager (filename: DEVMGMT.MSC), clicking on the appropriate entry for the wireless network adapter, selecting update, and then choosing the Browse my computer for driver software option, pointing that to the location of the unpacked drivers. Perhaps Device Manager will find the correct drivers to install that way.
Regards,
Aryeh Goretsky
I am a volunteer and neither a Lenovo nor a Microsoft employee. • Dexter is a good dog • Dexter je dobrý pes
S230u (3347-4HU) • X220 (4286-CTO) • W510 (4318-CTO) • W530 (2441-4R3) • X100e (3508-CTO) • X120e (0596-CTO) • T61p (6459-CTO) • T43p (2678-H7U) • T42 (2378-R4U) • T23 (2648-LU7)
Deutsche Community Comunidad en Español Русскоязычное Сообщество

Need a printer driver for a PIXMA MG2900 that will work on my MacBook Pro Operating System OSX 10.4.11

I have just purchased a Canon Pixma MG2900 printer and need to find a driver for this printer that will work with my MacBook Pro Operating System OSX Version 10.4.11.
I was directed to iTunes PIXMA/MAXI, but it didn't seem to download for me. It did say that it was for IPads or IPhones, not sure that it's intended for use on a computer.

Probably best to go to a library and submit your resume there.
You can make many web browsers claim to be ie. Here is how.
TenFourFox -- It's a port of the latest FireFox to run on older hardware and software.
"World's most advanced web browser. Finely tuned for the Power PC."
-- works for me on 10.4. Supports 10.5
http://www.floodgap.com/software/tenfourfox/
alternative download site:
http://www.macupdate.com/app/mac/37761/tenfourfox
OmniWeb uses the lastest Safari framework. The open source WebKit. Other browsers like Safari and iCab use the OS version of WebKit. The OmniWeb downloaded dmg includes it's own copy of the latest WebKit.
http://www.omnigroup.com/products/omniweb/
Safari 4.1.3 for Tiger
http://support.apple.com/kb/DL1069
iCab - The Taxi for the Internet
http://www.icab.de/
What is my user agent?
http://whatsmyuseragent.com/
You want to change your user agent to be ie.
in tenfourfox
tools > add-ons
seearch for change user agent
install
user agent switcher
tools > User agent switcher
change to ie.

What are the requirements in terms of system drive for visual studio 2013

According to this thread "visualstudio.uservoice.com/forums/121579-visual-studio/suggestions/2120283-allow-users-to-install-entirely-to-another-hard-dr" it is not possible to install visual studio fully on another drive rather that
the system drive. This link "visualstudio.com/products/visual-studio-professional-with-msdn-vs#Fragment_SystemRequirements" states the system requirement for visual studio pro 2013. However can somebody clarify what is needed in terms of system drive
requirement e.g. out of the 20 gb, how much is needed on the system drive.
Thanks

Hi,
Exact space required will vary widely based on installation components chosen and what you may have already installed on your system.
And When you install your VS in another Drive and run the VS installer, you can see system requirement in installation screen.
Because my work computer only have C Drive, I test the VS2012 professional installation in my home computer E drive. The Screen below:
I think the system requirement can also display when you install VS 2013.
Best Wishes!
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place. <br/> Click <a
href="http://support.microsoft.com/common/survey.aspx?showpage=1&scid=sw%3Ben%3B3559&theme=tech"> HERE</a> to participate the survey.

I need a USB driver for Bootcamp?

So I'm trying to get Windows 7 on my Mac and I have a disc with the ISO burned on it, but when I try to install it with Bootcamp I get the message
"There is no USB drive connected to the system. Please insert a USB drive to continue."
I don't have a USB driver and I don't see why I need one.

Follow the Bootcamp instructions http://www.apple.com/support/bootcamp/.
Do you have an internal optical drive? Do you have a retail copy of Windows? Are you using the internal optical drive for your retail copy of Windows? Do you have anything else plugged into the usb ports?

Need SATA RAID driver for RS480M2-IL(ms-7093) to install XP

Greetings,
I have lost my floppy to install the driver for my SATA RAID and can't seem to find the right one anywhere on the web.
It's an ATI SB400 chipset that has a SIL 3112a RAID controller.
The driver doesn't appear to be on the support page: http://global.msi.com.tw/index.php?func=proddesc&maincat_no=1&prod_no=214
If anyone can point me in the right direction, you'd be my hero.
Thanks in advance,
Jeff

Well, I found the correct driver, I think. It was in the ATI System driver package, on this page: http://global.msi.com.tw/index.php?func=driverfile&dno=2427&i=1
However, I still can't get XP to recognize my drive by pressing F6 at install. Perhaps I'm not using the right files from this package (287MB!). I found what I thought might be the correct drivers in the following folder: ATIDrv/SBDrv/RAID4xx and copied all the files to a floppy. Windows sees this driver and loads it, but when it gets to the point of formatting a drive (or whatever the next step is after you hit F^ and load the driver), it says no HD found, hit F3 to restart (sure would be nice to have other options here, like load another driver).
So, here's more info about my system (read the posting guidelines since last time
mobo: RS480M2-IL BIOS 7093v39
PS:Thermaltake TR2-430NP
RAM: G.Skill PC3200 1GBx2
HD1:Seagate Barracuda 7200.10 160GB
HD2:Maxtor Diamondmax20 160GB
Problem started when co-worker shut the machine off hard. On reboot, Invalid System Disk error and looking at RAID Bios shows drives in SYNC state. Removed the drives and attached to another machine, one looks fine so I clone it for good measure. The other is corrupted, XP wants to format as soon as it's mounted. Checking it with Filescavenger3 shows the files are still there, but I just reformat it since I have the good image of the other disk. Now I'm trying to fix the other drive, since it still comes up as Invalid System Disk, so I want to try either using the Recovery Console to FixMBR, or do a repair install of XP. I can't find the right driver to make this happen. I do have a disk with LastXPv2.11 that will recognize the drive, but it doesn't allow me to get into the recovery console or offer to repair xp. If you know how to extract the drivers from a slipstreamed disc, that might work too. Finally, I don't know if I've update the RAID bios, or if that happens when you update the mobo bios. I did update that to v39 and the RAID BIOS shows 4.2.50.
Sorry this is so long, any ideas to help get me going here would be fantastic
Cheers,
Jeff

Need Windows 7 driver for HP color laserjet 3500

Urgently need a driver for my HP color laserjet 3500 to install on new laptop with Windows 7! HP and Windows sites say there is no driver for Windows 7. I really love my printer but need the driver. What can I do?

According to this HP website, Vista driver only works for 64 bits win7

Need networked printer driver for HP LJ 1022N for Windows 8.1 x64

We've had this printer setup on our Windows 2003 print server for years & now that I'm transitioning to a Windows 2012 print server & Win 8.1 clients, the only driver I'm finding is a host-based driver for usb. Is there another driver I can use on the print server for this printer? It wasn't listed in the UPD supported list nor is it in the HP list in the Add driver dialog after updating from Windows Updates. I appreciate any help you can provide!

Hello Glorfindel,
Welcome to the HP Forums.
I understand your concerns with the Laserjet 1022N. If you're looking for a Windows 2012 print server, then there is no full feature software. Now, for your Windows 8.1, there is a full feature software on the HP website here.
If you need help install this software over a network connection, then please follow this HP document on Installing the Printer Software in Windows 8.1 for a USB or Network Connection.
Please let me know if you have any further questions.
I worked on behalf of HP.

Need Base system driver / SD controller Driver for A30

Similar Messages

Maybe you are looking for