Need BI7 HELP LINK.

HAI GURUS
PLS SEND ME THE BI7 HELP LINK.

HI,
Go through these links really helpful...
http://help.sap.com/saphelp_nw2004s/helpdata/en/fc/1251421705be30e10000000a155106/frameset.htm
What's New in BI with SAP NetWeaver 7.0
http://help.sap.com/saphelp_nw04s/helpdata/en/a4/1be541f321c717e10000000a155106/frameset.htm
/people/michael.eacrett/blog/2006/06/07/whats-new-in-sap-netweaver-702004s--an-introduction-to-the-functionality-deltas-and-major-changes
http://csc-studentweb.lrc.edu/swp/Berg/Articles/NW2004s_what_is_new.ppt

Similar Messages

  • Need some Helpful Links for downloading documents

    Hi Experts,
    I would like to know if there are any links from where i can view and download the documents that will be helpful for me in gaining more knowledge on any particular topic in detail for SAP B1 2005B & 2007B.
    I am looking for topics such as Creating Tax codes, VAT and CENVAT, Bank Reconciliations, Financial, Chart of Accounts, Inventory Management, Batch Management, etc.... with some examples or scenarios which are not covered in detail in the course materials.
    Merry Christmas to all....
    Thanks and Regards,
    Kaushal

    Hi Vijay,
    Thanks for your response. But, when i visit the link, i get the following message:
    Alias not available
    Line: -
    The alias SMB/EDUCATION that you have entered does either not exist,
    or you are not authorized to access it.
    Line: -
    I have a s-user id but, i don't know if i can access the documents from the SAP portal. I hope that we should get the access by default by SAP.
    Thanks and Regards,
    Kaushal.

  • HT5625 please i need a help, a cant afford to buy new iphone, i bought pairly used in the market here in khartoum Sudan, mistakenly i reset it where i realised that i cannot use it again because it was linked to an apple id, and i dont know the person.

    please i need a help about how to use my iphone again, i bought pairly used, mistakenly i reset it and then i realised that it was linked to another persons id and password which i dont know or how to contact the person, and still i cant evan see the full email adress of the person which i think i could have contact him directly. so does that means i can no more longer use the phone again? please i need help, am a student from khartoum sudan.

    profuhassan wrote:
    please i need a help about how to use my iphone again, i bought pairly used, mistakenly i reset it and then i realised that it was linked to another persons id and password which i dont know or how to contact the person, and still i cant evan see the full email adress of the person which i think i could have contact him directly. so does that means i can no more longer use the phone again? please i need help, am a student from khartoum sudan.
    That is correct, you now have a paperweight.  Unless you can get a hold of the orignal owner.

  • Hi i need help please . when i want to buy app from store ask me the security question but i forgot the answer  so i need to the link to rest answer of security question

    hi
    i need help please . when i want to buy app from store ask me the security question
    but i forgot the answer
    so i need to the link to rest answer of security question

    The Best Alternatives for Security Questions and Rescue Mail
        a. Send Apple an email request at: Apple - Support - iTunes Store - Contact Us.
        b. Call Apple Support in your country: Customer Service: Contact Apple support.
        c. Rescue email address and how to reset Apple ID security questions.

  • HT1222 I need some help.... I Have the iPhone 4S and downloaded the new software (6.0) and everything seems great so far except when I try to open a link in safari from a different app (messages, Facebook, ext..) it glitches and won't load. Any advice?

    I need some help.... I Have the iPhone 4S and downloaded the new software (6.0) and everything seems great so far except when I try to open a link in safari from a different app (ie..messages, Facebook, ect..) it glitches and won't load. The blue loading bar will just jump back and forth and the page will not load properly if at all....

    It sounds like you may have multiple problems, but none of them are likely to be caused by malware.
    First, the internet-related issues may be related to adware or a network compromise. I tend to lean more towards the latter, based on your description of the problem. See:
    http://www.adwaremedic.com/kb/baddns.php
    http://www.adwaremedic.com/kb/hackedrouter.php
    If investigation shows that this is not a network-specific issue, then it's probably adware. See my Adware Removal Guide for help finding and removing it. Note that you mention AdBlock as if it should have prevented this, but it's important to understand that ad blockers do not protect you against adware in any way. Neither would any kind of anti-virus software, which often doesn't detect adware.
    As for the other issues, it sounds like you've got some serious corruption. I would be inclined to say it sounds like a failing drive, except it sounds like you just got it replaced. How did you get all your files back after the new drive was installed?
    (Fair disclosure: I may receive compensation from links to my sites, TheSafeMac.com and AdwareMedic.com, in the form of buttons allowing for donations. Donations are not required to use my site or software.)

  • I need help linking Microsoft SDK to My visual studio 2010 sp1 project?

    I need help linking Microsoft SDK to My visual studio 2010 sp1 project?
    Hi, I'm on windows 8.1 and I'm getting a lot of Direct x sdk errors every time I try to debug or release a project. Please help me I'm lost trying to fix's this, thanks.

    Hi programmerblizz,
    According to your description, could you please tell me which kind of project you try to debug or release? Is it a c++ project or other?
    If it is a c++ project, I suggest you can refer the following thread check your issue in your side.
    Reference:
    http://stackoverflow.com/questions/26303922/directx-9-cannot-find-the-include-libaries
    If no, please tell me more detail message about your issue.
    Best Regards,
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Need to Add Help links to ESS pages

    Hello,
    I have a requirement to add helps links to ESS services like address etc.
    The services have the roadmap element. Is it possible to add the link besides the roadmap element and right aligned?
    Which component should the link be added to?
    Is it possible that all the personal info services will have the link pointing to respective URLs?
    I figured that I might have to change the sap.compcui_gpxssutils DC. Am I right?
    But here I face a problem, that the DC is not modifiable in the DTR.
    Please let me know your suggestions.
    Thanks and regards,
    Mayuresh

    Hi,
    In Homepage Framework for ESS, there is a help service with every service. Check if this will help you.
    You can create a service as a help service. EIC_SERVICE_REQUEST is an example of help service provided by SAP. Then you can configure this help service to any service you want. This way you can provide access to help informationm without changing the code.
    To create your own help service, you can upload the help documents(say HTML) in portal KM repository. Create a KM document iView for the document. Create a page out of the iView and configure the PCD path of the page in the Hompageframework service.
    Regards
    Srini

  • Need to have the help link at my custom pages

    Hi All,
    I want to have the help link in my few custom page's . Can anyone help me on this ...
    Regards
    Karandeep Singh

    Keerthi,
    Thanks for your update .
    But my requirement was to create the help link on all the custom pages as it is appering in all standard pages .
    For standard pages they have attached the standard function with standard menu (ICX_GLOBAL_MENU) due to which help is appearing in all the standard pages but if we want to have the help link on custom pages then we have to manually set the page layout property "Help Target" of all the custom pages .
    It worked for me and issue is resolved now.
    Regards
    Karandeep

  • I need your help with a decision to use iPhoto.  I have been a PC user since the mid 1980's and more recently have used ACDSee to manage my photo images and Photoshop to edit them.  I have used ProShow Gold to create slideshows.  I am comfortable with my

    I need your help with a decision to use iPhoto.  I have been a PC user since the mid 1980’s and more recently have used ACDSee to manage my photo images and Photoshop to edit them.  I have used ProShow Gold to create slideshows.  I am comfortable with my own folder and file naming conventions. I currently have over 23,000 images of which around 60% are scans going back 75 years.  Since I keep a copy of the originals, the storage requirements for over 46,000 images is huge.  180GB plus.
    I now have a Macbook Pro and will add an iMac when the new models arrive.  For my photos, I want to stay with Photoshop which also gives me the Bridge.  The only obvious reason to use iPhoto is to take advantage of Faces and the link to iMovie to make slideshows.  What am I missing and is using iPhoto worth the effort?
    If I choose to use iPhoto, I am not certain whether I need to load the originals and the edited versions. I suspect that just the latter is sufficient.  If I set PhotoShop as my external editor, I presume that iPhoto will keep track of all changes moving forward.  However, over 23,000 images in iPhoto makes me twitchy and they are appear hidden within iPhoto.  In the past, I have experienced syncing problems with, and database errors in, large databases.  If I break up the images into a number of projects, I loose the value of Faces reaching back over time.
    Some guidance and insight would be appreciated.  I have a number of Faces questions which I will save for later. 

    Bridge and Photoshop is a common file-based management system. (Not sure why you'd have used ACDSEE as well as Bridge.) In any event, it's on the way out. You won't be using it in 5 years time.
    Up to this the lack of processing power on your computer left no choice but to organise this way. But file based organisation is as sensible as organising a Shoe Warehouse based on the colour of the boxes. It's also ultimately data-destructive.
    Modern systems are Database driven. Files are managed, Images imported, virtual versions, lossless processing and unlimited editing are the way forward.
    For a Photographer Photoshop is overkill. It's an enormously powerful app, a staple of the Graphic Designers' trade. A Photographer uses maybe 15% to 20% of its capability.
    Apps like iPhoto, Lightroom, Aperture are the way forward - for photographers. There's the 20% of Photoshop that shooters actually use, coupled with management and lossless processing. Pop over to the Aperture or Lightroom forums (on the Adobe site) and one comment shows up over and over again... "Since I started using Aperture/ Lightroom I hardly ever use Photoshop any more..." and if there is a job that these apps can do, then the (much) cheaper Elements will do it.
    The change is not easy though, especially if you have a long-standing and well thought out filing system of your own. The first thing I would strongly advise is that you experiment before making any decisions. So I would create a Library, import 300 or 400 shots and play. You might as well do this in iPhoto to begin with - though if you’re a serious hobbyist or a Pro then you'll find yourself looking further afield pretty soon. iPhoto is good for the family snapper, taking shots at birthdays and sharing them with friends and family.
    Next: If you're going to successfully use these apps you need to make a leap: Your files are not your Photos.
    The illustration I use is as follows: In my iTunes Library I have a file called 'Let_it_Be_The_Beatles.mp3'. So what is that, exactly? It's not the song. The Beatles never wrote an mp3. They wrote a tune and lyrics. They recorded it and a copy of that recording is stored in the mp3 file. So the file is just a container for the recording. That container is designed in a specific way attuned to the characteristics and requirements of the data. Hence, mp3.
    Similarly, that Jpeg is not your photo, it's a container designed to hold that kind of data. iPhoto is all about the data and not about the container. So, regardless of where you choose to store the file, iPhoto will manage the photo, edit the photo, add metadata to the Photo but never touch the file. If you choose to export - unless you specifically choose to export the original - iPhoto will export the Photo into a new container - a new file containing the photo.
    When you process an image in iPhoto the file is never touched, instead your decisions are recorded in the database. When you view the image then the Master is presented with these decisions applied to it. That's why it's lossless. You can also have multiple versions and waste no disk space because they are all just listings in the database.
    These apps replace the Finder (File Browser) for managing your Photos. They become the Go-To app for anything to do with your photos. They replace Bridge too as they become a front-end for Photoshop.
    So, want to use a photo for something - Export it. Choose the format, size and quality you want and there it is. If you're emailing, uploading to websites then these apps have a "good enough for most things" version called the Preview - this will be missing some metadata.
    So it's a big change from a file-based to Photo-based management, from editing files to processing Photos and it's worth thinking it through before you decide.

  • I want to get iBook, Facebook and Skype to my iphone 4.2.1 through my iTune, but I coudn't because it is said that it requires a newer version of iOS. Please I need your help. Thanks

    I want to get iBook, Facebook and Skype to my iphone 4.2.1 through my iTune, but I coudn't because it is said that it requires a newer version of iOS. Please I need your help. Thanks

    If your iPhone can't be updated to a higher iOS version then the only way to get them is if you downloaded versions of them which were compatible with iOS 4.2.1 and you still have copies of those versions somewhere e.g. on your computer or on a backup - only the current version of each app is available in the store, and as apps (and other content) are tied to the account that downloads them, you will need to have older copies that are linked to your id

  • I need Fusion help creating a demo of BRM JCA Resource Adapter

    I need Fusion help creating a demo of BRM JCA Resource Adapter.
    I know BRM well but am clueless with Fusion.
    I am trying to figure out what Fusion products to download and install and how I manipulate the Fusion side to manipulate BRM.
    My BRM docs say:
    Installing the BRM JCA Resource Adapter ->
    Software requirements
    (yada yada install a bunch of BRM stuff I know how to do)
    The adapter must be deployed on a J2EE 1.4-compliant application server that has implemented the JCA 1.5 specification. The adapter runs only in a managed environment. (Does this imply some particular Fusion package?)
    (more yada yada about installing more BRM packages I know how to do)
    Deploying and configuring the BRM JCA Resource Adapter ->
    Overview of the BRM JCA Resource Adapter configuration procedure
    The procedure for setting up the BRM JCA Resource Adapter includes the following tasks:
    Installing the adapter on your BRM system, if you have not already done so. See Installing the BRM JCA Resource Adapter.
    Generating the schema files for the adapter. See Generating the schema files for your system. (links to some BRM commands np)
    Specifying how to construct XML tags. See Specifying the XML tags for extended fields. (links to an oob file included with directions on how to address BRM customizations np)
    Generating the WSDL files for the adapter. See Generating the WSDL files for your system. (links to an oob file with directions to configure. I could use some help if/when I get this far)
    The last two look pretty important but I haven't a clue. I pasted the text from the docs below.
    Deploying the adapter on your application server. See Deploying the BRM JCA Resource Adapter on an Oracle application server.
    Connecting the adapter to the BRM software. See Connecting the adapter to BRM in Oracle AS.
    Deploying the BRM JCA Resource Adapter on an Oracle application server
    The adapter is dependent on Java Archive (JAR) files to deploy properly. The following table lists the JAR files that the adapter requires from each application in your system.
    Application
    JAR files
    J2EE application server
    classes12.jar, connector15.jar, and jta.jar
    Oracle BPEL process
    bpm-infra.jar, orabpel-thirdparty.jar, orabpel.jar, and xmlparserv2.jar
    BRM J2EE Resource Adapter
    pcm.jar and pcmext.jar
    Apache
    xercesImpl.jar
    If you are deploying the adapter in a standalone Oracle Containers for Java EE (OC4J) instance, make sure these JAR files are available to the class loader that is loading the adapter.
    If you are deploying the adapter by using Oracle SOA Suite, these JAR files are available as part of the oracle.bpel.common code source. You import these libraries as follows:
    Open the Oracle_home/j2ee/Instance/config/applications.xml configuration file for the J2EE instance.
    Add the oracle.bpel.common entry (shown in bold below) to the imported-shared-libraries section of the file:
    <imported-shared-libraries>
    <import-shared-library name="adf.oracle.domain"/>
    <import-shared-library name="oracle.bpel.common"/>
    </imported-shared-libraries>
    Save and close the file.
    Restart the application server or the J2EE instance.
    After you make the JAR files available, deploy the adapter on the Oracle application server by using either the Oracle Application Server (Oracle AS) Application Server Control (ASC) or the Oracle admintool.jar file. Copy the adapter archive file (BRM_home/apps/brm_integrations/jca_adapter/OracleBRMJCA15Adapter.rar) from the installation directory to a location that is accessible to the adapter deployment tool. You can then open and deploy the archive file on your application server.
    After successful deployment, return the applications.xml file to its original settings and add the oracle.bpel.common codesource to the BRM Adapter oc4j-ra.xml file:
    Open the Oracle_home/j2ee/Instance/config/applications.xml configuration file for the J2EE instance.
    Remove the following oracle.bpel.common entry (shown in bold below):
    <imported-shared-libraries>
    <import-shared-library name="adf.oracle.domain"/>
    <import-shared-library name="oracle.bpel.common"/>
    </imported-shared-libraries>
    Save and close the file.
    Open the JCA Resource Adapter oc4j-ra.xml file from the Oracle_home/j2ee/Instance/application-deployments/default/BRMAdapterDeploymentName directory.
    Add the oracle.bpel.common entry (shown in bold below) to the oc4j-connector-factories section of the file:
    <oc4j-connector-factories...>
    <imported-shared-libraries>
    <import-shared-library name="oracle.bpel.common"/>
    </imported-shared-libraries>
    <oc4j-connector-factories>
    Save and close the file.
    Restart the application server or the J2EE instance.
    For more information about deploying the adapter, see your application server’s documentation.
    Connecting the adapter to BRM in Oracle AS
    You connect the adapter to the BRM software by creating connection pools and connection factories. As part of the adapter deployment, the application server creates oc4j-ra.xml from the packaged ra.xml. The ra.xml file is located in the Oracle_home/j2ee/Instance/connectors/AdapterDeploymentName/AdapterDeploymentName/META-INF directory. For example, Oracle_home/j2ee/home/connectors/BRMAdapter/BRMAdapter/META-INF/ra.xml.
    Use the resource adapter home page from the Oracle AS ASC page to create connection pools and connection factories.
    Create your connection pool by following the performance and tuning guidelines in Configuring Connection Pooling in OC4J in Oracle Containers for J2EE Resource Adapter Administrator's Guide. See download.oracle.com/docs/cd/B31017_01/web.1013/b28956/conncont.htm.
    Make sure you set the pool’s Maximum Connections parameter (maxConnections XML entity) equal to or greater than the Oracle BPEL process manager’s dspMaxThreads parameter. For more information, see Oracle BPEL Process Manager Performance Tuning in Oracle Application Server Performance Guide for 10g Release 3 (10.1.3.1.0) at download.oracle.com/docs/cd/B31017_01/core.1013/b28942/tuning_bpel.htm.
    Note To set up JCA Resource Adapter transaction management in BPEL, you must create a private connection pool and set its Inactive Connection Timeout property (inactivity-timeout XML entity) to 0. See About JCA Resource Adapter transaction management in BPEL for more information.
    Create as many connection factories as your system needs. For each connection factory, specify the following:
    The JNDI location for the connection factory.
    The connection pool to use.
    How to connect to BRM by using these entries:
    Entry
    Description
    ConnectionString
    Specify the protocol, host name, and port number for connecting to the BRM software. For example: ip Server1 12006.
    DBNumber
    Specify the database number for the BRM database. For example, enter 1 or 0.0.0.1 for database 0.0.0.1.
    InputValidation
    Specifies whether to validate the input XMLRecord:
    True — The adapter validates the input XMLRecord against the opcode schema.
    False — The adapter does not validate the input XMLRecord.
    The default is False.
    This overrides any other validation parameter specified in the WSDL file.
    OutputValidation
    Specifies whether to validate the output XMLRecord:
    True — The adapter validates the output XMLRecord against the opcode schema.
    False — The adapter does not validate the output XMLRecord.
    The default is False.
    This overrides any other validation parameter specified in the WSDL file.
    LoginType
    Specifies the authentication method:
    1 — The adapter logs in to BRM by using the specified login name and password.
    0 — The adapter logs in to BRM by using the specified service type and POID ID.
    The default is 1.
    UserName
    Specifies the login name the adapter uses for logging in to the BRM software.
    Note This entry is required only if LoginType is set to 1.
    Password
    Specify the password the adapter uses for logging in to the BRM software.
    Note This entry is required only if LoginType is set to 1.
    PoidID
    Specifies the POID ID. This entry should be set to 1.
    ServiceType
    Specifies the service the adapter uses to log in to the BRM software.
    The default is /service/pcm_client.
    You have successfully configured the adapter to connect to BRM.

    I need Fusion help creating a demo of BRM JCA Resource Adapter.
    I know BRM well but am clueless with Fusion.
    I am trying to figure out what Fusion products to download and install and how I manipulate the Fusion side to manipulate BRM.
    My BRM docs say:
    Installing the BRM JCA Resource Adapter ->
    Software requirements
    (yada yada install a bunch of BRM stuff I know how to do)
    The adapter must be deployed on a J2EE 1.4-compliant application server that has implemented the JCA 1.5 specification. The adapter runs only in a managed environment. (Does this imply some particular Fusion package?)
    (more yada yada about installing more BRM packages I know how to do)
    Deploying and configuring the BRM JCA Resource Adapter ->
    Overview of the BRM JCA Resource Adapter configuration procedure
    The procedure for setting up the BRM JCA Resource Adapter includes the following tasks:
    Installing the adapter on your BRM system, if you have not already done so. See Installing the BRM JCA Resource Adapter.
    Generating the schema files for the adapter. See Generating the schema files for your system. (links to some BRM commands np)
    Specifying how to construct XML tags. See Specifying the XML tags for extended fields. (links to an oob file included with directions on how to address BRM customizations np)
    Generating the WSDL files for the adapter. See Generating the WSDL files for your system. (links to an oob file with directions to configure. I could use some help if/when I get this far)
    The last two look pretty important but I haven't a clue. I pasted the text from the docs below.
    Deploying the adapter on your application server. See Deploying the BRM JCA Resource Adapter on an Oracle application server.
    Connecting the adapter to the BRM software. See Connecting the adapter to BRM in Oracle AS.
    Deploying the BRM JCA Resource Adapter on an Oracle application server
    The adapter is dependent on Java Archive (JAR) files to deploy properly. The following table lists the JAR files that the adapter requires from each application in your system.
    Application
    JAR files
    J2EE application server
    classes12.jar, connector15.jar, and jta.jar
    Oracle BPEL process
    bpm-infra.jar, orabpel-thirdparty.jar, orabpel.jar, and xmlparserv2.jar
    BRM J2EE Resource Adapter
    pcm.jar and pcmext.jar
    Apache
    xercesImpl.jar
    If you are deploying the adapter in a standalone Oracle Containers for Java EE (OC4J) instance, make sure these JAR files are available to the class loader that is loading the adapter.
    If you are deploying the adapter by using Oracle SOA Suite, these JAR files are available as part of the oracle.bpel.common code source. You import these libraries as follows:
    Open the Oracle_home/j2ee/Instance/config/applications.xml configuration file for the J2EE instance.
    Add the oracle.bpel.common entry (shown in bold below) to the imported-shared-libraries section of the file:
    <imported-shared-libraries>
    <import-shared-library name="adf.oracle.domain"/>
    <import-shared-library name="oracle.bpel.common"/>
    </imported-shared-libraries>
    Save and close the file.
    Restart the application server or the J2EE instance.
    After you make the JAR files available, deploy the adapter on the Oracle application server by using either the Oracle Application Server (Oracle AS) Application Server Control (ASC) or the Oracle admintool.jar file. Copy the adapter archive file (BRM_home/apps/brm_integrations/jca_adapter/OracleBRMJCA15Adapter.rar) from the installation directory to a location that is accessible to the adapter deployment tool. You can then open and deploy the archive file on your application server.
    After successful deployment, return the applications.xml file to its original settings and add the oracle.bpel.common codesource to the BRM Adapter oc4j-ra.xml file:
    Open the Oracle_home/j2ee/Instance/config/applications.xml configuration file for the J2EE instance.
    Remove the following oracle.bpel.common entry (shown in bold below):
    <imported-shared-libraries>
    <import-shared-library name="adf.oracle.domain"/>
    <import-shared-library name="oracle.bpel.common"/>
    </imported-shared-libraries>
    Save and close the file.
    Open the JCA Resource Adapter oc4j-ra.xml file from the Oracle_home/j2ee/Instance/application-deployments/default/BRMAdapterDeploymentName directory.
    Add the oracle.bpel.common entry (shown in bold below) to the oc4j-connector-factories section of the file:
    <oc4j-connector-factories...>
    <imported-shared-libraries>
    <import-shared-library name="oracle.bpel.common"/>
    </imported-shared-libraries>
    <oc4j-connector-factories>
    Save and close the file.
    Restart the application server or the J2EE instance.
    For more information about deploying the adapter, see your application server’s documentation.
    Connecting the adapter to BRM in Oracle AS
    You connect the adapter to the BRM software by creating connection pools and connection factories. As part of the adapter deployment, the application server creates oc4j-ra.xml from the packaged ra.xml. The ra.xml file is located in the Oracle_home/j2ee/Instance/connectors/AdapterDeploymentName/AdapterDeploymentName/META-INF directory. For example, Oracle_home/j2ee/home/connectors/BRMAdapter/BRMAdapter/META-INF/ra.xml.
    Use the resource adapter home page from the Oracle AS ASC page to create connection pools and connection factories.
    Create your connection pool by following the performance and tuning guidelines in Configuring Connection Pooling in OC4J in Oracle Containers for J2EE Resource Adapter Administrator's Guide. See download.oracle.com/docs/cd/B31017_01/web.1013/b28956/conncont.htm.
    Make sure you set the pool’s Maximum Connections parameter (maxConnections XML entity) equal to or greater than the Oracle BPEL process manager’s dspMaxThreads parameter. For more information, see Oracle BPEL Process Manager Performance Tuning in Oracle Application Server Performance Guide for 10g Release 3 (10.1.3.1.0) at download.oracle.com/docs/cd/B31017_01/core.1013/b28942/tuning_bpel.htm.
    Note To set up JCA Resource Adapter transaction management in BPEL, you must create a private connection pool and set its Inactive Connection Timeout property (inactivity-timeout XML entity) to 0. See About JCA Resource Adapter transaction management in BPEL for more information.
    Create as many connection factories as your system needs. For each connection factory, specify the following:
    The JNDI location for the connection factory.
    The connection pool to use.
    How to connect to BRM by using these entries:
    Entry
    Description
    ConnectionString
    Specify the protocol, host name, and port number for connecting to the BRM software. For example: ip Server1 12006.
    DBNumber
    Specify the database number for the BRM database. For example, enter 1 or 0.0.0.1 for database 0.0.0.1.
    InputValidation
    Specifies whether to validate the input XMLRecord:
    True — The adapter validates the input XMLRecord against the opcode schema.
    False — The adapter does not validate the input XMLRecord.
    The default is False.
    This overrides any other validation parameter specified in the WSDL file.
    OutputValidation
    Specifies whether to validate the output XMLRecord:
    True — The adapter validates the output XMLRecord against the opcode schema.
    False — The adapter does not validate the output XMLRecord.
    The default is False.
    This overrides any other validation parameter specified in the WSDL file.
    LoginType
    Specifies the authentication method:
    1 — The adapter logs in to BRM by using the specified login name and password.
    0 — The adapter logs in to BRM by using the specified service type and POID ID.
    The default is 1.
    UserName
    Specifies the login name the adapter uses for logging in to the BRM software.
    Note This entry is required only if LoginType is set to 1.
    Password
    Specify the password the adapter uses for logging in to the BRM software.
    Note This entry is required only if LoginType is set to 1.
    PoidID
    Specifies the POID ID. This entry should be set to 1.
    ServiceType
    Specifies the service the adapter uses to log in to the BRM software.
    The default is /service/pcm_client.
    You have successfully configured the adapter to connect to BRM.

  • Issue while adding Help Link using personalization

    Hi... i am adding a help links on all the iRec pages using personalization.
    Requirment:-
    Need to have a help link on all the pages of iRec at the left corner of the page
    So i made the following changes to do this...
    1. Created a new Region(This regios is shared by all the pages of iRec)
    StackLayout (AM set to deflaut value)
    |_
    RowLayout (Horz Align set to end)
    2. Now i go to the page, click on personalize link at top, and create a new Stack Layout Region below the PageLayoutRN for the Page
    and set the extend property of this StackLayout to my above create region.
    3. Create a new item under RowLayout, Item Type "Link" and set the destination URI for this link to say "http://google.com"
    I do the same steps above on all the pages of iRec and point the destination URI for the link to the one i want to set and all this is done at Site level.
    But the issue i am getting is that i am not able to see these personalizations for all the users and at some places the links i created are not clickable. They simply display on the page but cannot be clicked.
    Is there something i am doing wrong? so is there any step i did wrongly? Please let me know the solution.
    Thanks
    Sandeep

    It should not be show this behavior. one test you can do in this reference create Two more item at site level say MessageStyleText and one more link and check this behavior to all the user.

  • Need some help in ARCHITECTURE level for upgrading SAP BW 3.5 to SAP BI 7.0

    HI all,
    I am a consultant in a small company, i am curently handling upgradation project i need some help in ARCHITECTURING this complete project, please share me your knowledge, like process flows what information i need to get from clients before starting the project, what is pre upgradation checks, post upgradation cheks  ...............
    Thanks in advance.............

    Hi,
    You need to confirm the downtime during the upgrade activity.
    Check for Space and resource allocation.
    http://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/8d1a0a3a-0b01-0010-eb82-99c4584c6db3
    https://wiki.sdn.sap.com/wiki/display/BI/UpgradefromBW3.XtoBI7.0+%28SP13%29
    https://wiki.sdn.sap.com/wiki/display/BI/Migrationof3.xobjectstoBI7.0
    You need to make sure some OSS notes should be applied, check the below link for the same:
    https://wiki.sdn.sap.com/wiki/display/BI/UpgradetoNetWeaverBI7.0%28SAPNotes+%29
    http://wiki.sdn.sap.com/wiki/display/BI/BIUpgradation-HelpfulOSSnotesfromEDWperspective
    Hope this helps...
    Rgs,
    Ravikanth.

  • Need Some help in Developing an ALV report ..Plz help me

    Hi Experts I am basic learner to ABAP Here I need some help in developing a Delivery *** Invoice Report....Please help me by spending a little time..
    Tables are VBAK VBAP LIPS LIKP   and Document floe table is VBFA
      SELECT VBELN VKORG VTWEG SPART
        FROM VBAK
        INTO TABLE I_VBAK
        WHERE VBELN IN S_VBELN.
      IF I_VBAK IS NOT INITIAL .
        SELECT VBELN POSNR MATKL POSAR WERKS
          FROM VBAP
          INTO TABLE I_VBAP
          FOR ALL ENTRIES IN I_VBAK
          WHERE VBELN = I_VBAK-VBELN.
      ENDIF.
      IF I_VBAP IS NOT INITIAL.
        SELECT * FROM LIPS
          INTO CORRESPONDING FIELDS OF TABLE I_LIPS
          WHERE VGBEL = VBAP-VBELN
          AND VGPOS = VBAP-POSNR.
      ENDIF.
      IF I_LIPS IS NOT INITIAL.
        SELECT VBELN VSTEL VKORG KUNNR
        FROM LIKP
        INTO TABLE I_LIKP.
      ENDIF.
    Moderator message : Outsourcing is not allowed, don't expect others to correct your source code. Thread locked.
    Edited by: Vinod Kumar on Aug 1, 2011 5:43 PM

    hi ,
      Look in this link
      <a href="http://help.sap.com/saphelp_nw04/helpdata/en/b3/0ef3e8396111d5b2e80050da4c74dc/frameset.htm">http://help.sap.com/saphelp_nw04/helpdata/en/b3/0ef3e8396111d5b2e80050da4c74dc/frameset.htm</a>
    <a href="http://help.sap.com/saphelp_nw04/helpdata/en/21/894eeee0b911d4b2d90050da4c74dc/content.htm">http://help.sap.com/saphelp_nw04/helpdata/en/21/894eeee0b911d4b2d90050da4c74dc/content.htm</a>
    <a href="http://help.sap.com/saphelp_nw04/helpdata/en/80/1a62bfe07211d2acb80000e829fbfe/content.htm">http://help.sap.com/saphelp_nw04/helpdata/en/80/1a62bfe07211d2acb80000e829fbfe/content.htm</a>
    Regards
    Renjith Kumar

  • I am the biggest "Newb" on this site,  and I really need some help please..

    Ok, the short of it.... I started training on Database programming about 2 weeks ago. I still don't really know a thing, or even understand the concepts. Now, my boss wants me to fix a bug in Oracle, and I haven't a clue. The ONLY help I've gotten was a link to this forum, and a speech about how I need to help myself. I told him I have the same chance of fixing anything, as monkeys typing hamlet. Anyone up for a challenge?
    When I go to Application System, then Application Entry and enter the password a dialog box appears.... "FRM-40039: Cannot attatch library Empower while opening from APPUSRAPP."
    That's what I have to fix. I have no clue. I don't even really know how to click around in this program. Please help, someone.
    UPDATE: I've been told that everyone's pretty much going to be a jerk to me for asking this, and I'm currently searching old threads and can't find a way to delete this one I posted. So, you could just ignore the post, or jump in and be the internet tough-guy and tell me what I already know.... I'm a newb.
    Edited by: user11033020 on Apr 14, 2009 11:41 AM

    As this appears to be a Forms error (the error begins with FRM) you might get a better response by posting this in the Forms forum:
    Forms
    The Community Feedback forum isn't meant for product-related questions (as it says in the title).
    Still, you should consider searching Metalink as well. If you've paid for support, you have every right to use it.

Maybe you are looking for