NEED BIG HELP PLEASE!!!!!

ok this is whats happend my ISP is with NTL and i went on holiday and forgot to pay the bill so when i got back i was cut off but i paid the bill and got put back on i was on the 1MB boardband and i tryed to play runescape but when i open it all it dose is stay at LOADING GAME ENGINE and after a little bit of time it will load the game and then i login but after i login i can play it for like 5 mins and then its stats to lag really bad and then i close the program and try to do it all again and it just stays at LOADING GAME ENGINE and thats it so i thorght it was my internet so i got the 4MB broardband and it still dose it have i done something to my java do i need something i dont no if any1 can help me then plz do!?!

this isn't a broadband technical support forum, nor a RuneScape game support line.
There's a RuneScape technical support forum you should be using instead
http://kbase.runescape.com/viewcategory.ws?cat_id=126

Similar Messages

Remote App on iPad connects but drops after about 20 mins. Need to turn off wait about 1 minute then turn on wifi on iMac before it can reconnect. Need some help please.

Remote App on iPad connects but drops after about 20 mins. Need to turn off wait about 1 minute, then turn on wifi on iMac before it can reconnect. Need some help please.
Already gone through troubleshooting guide a zillion times. Thanks.

This worked for me... A little time consuming but once you get rolling it goes GREAT... Thanks....
I got my artwork and saved it to my Desktop
Opened up Microsoft Paint and clicked on "File" and "Open" and found it to get it on the screen to resize it
Clicked "resize" and a box for changing it opened up
Checked the box "Pixels" and "Unchecked maintain aspect ratio"
Set Horizontal for 640 and Vertical for 480
Clicked on "OK" and went back to "File" and did a "Save As" and chose JPEG Picture
It came up "File Already Existed" and clicked "OK" (really did not care about the original artwork I found because wrong size)
Went to iTunes and on the movie right clicked on "Get Info", clicked on "Details", then "Artwork"
Go to the little box on the top left that shows your old artwork and click on it to get the little blue border to appear around it and hit "Delete" to make it gone
Click on "Add Artwork" and find it where you put the one from above on your Desktop and hit "Open" and OK and your new artwork is now there and all good.
Sounds like a lot of steps to follow but after around 5 or so you will fly through it. This worked perfect on my iPhone 6 Plus and I have artwork on my Home Videos now.

Hi, my iphone its in recovery mode and when i restore my iphone 5s loading show the blue screen and show note on itunes (unknown error 14) please i need your help please . thanks

Hi, my iphone its in recovery mode and when i restore my iphone 5s loading show the blue screen and show note on itunes (unknown error 14) please i need your help please . thanks

In the article Resolve iOS update and restore errors this is what it says about error 14:
Check your USB connections
Related errors: 13, 14, 1600, 1601, 1602, 1603, 1604, 1611, 1643-1650, 2000, 2001, 2002, 2005, 2006, 2009, 4005, 4013, 4014, or “invalid response."
If the USB connection between your device and computer is interrupted, you may be unable to update or restore.
To narrow down the issue, you can also change up your hardware:
Use the USB cable that came with your device, or a different Apple USB cable.
Plug your cable into a different USB port directly on your computer. Don't plug it into your keyboard.
Try a different computer.
If necessary, resolve any further issues with the USB connection, then with your security software.
If you're still seeing the error message, check for hardware issues by following the next section.

Hi! I got movies on my external hard drive that are AVI kind and won't play on my macbook pro? need some help please!!

Hi! I got Movies on my external hard drive that are AVI kind and won't play on my macbook pro? When I start playing the movie a message pops up and says "a required codec is not available". I tried flip4mac, xvid, divx already and still not playing my video. need some help please!! thanks.

Although vlc mentioned above is a much more powerful and better player you could try installing Perian if you insist on using the quicktime player. It may supply the codec it needs.
Not sure why you wouldn't be able to play straight avi files though in quicktime.

HT1199 I need your help, PLEASE. How can to fix "NO MOUNTABLE FILE SYSTEM" error of my back up hard drive on Mountain Lion OS?

I need your help, PLEASE. How can to fix "NO MOUNTABLE FILE SYSTEM" error of my back up hard drive on Mountain Lion OS?

Did you format the drive for Mac use before you tried to use it as a backup drive?
Are you using Time Machine on the drive? You can't view the contents of its backup database and the only way to access the info is directly from the Time Machine app.

I need serious help please.. We do translations of schoolbooks, I looked for an over-type function but were unable to find, we are working in indesign CS 5. it takes up allot of time to delete text and type in the new language.

I need serious help please.. We do translations of schoolbooks, I looked for an over-type function but were unable to find, we are working in indesign CS 5. it takes up allot of time to delete text and type in the new language.

Argh that's frustrating! I never noticed that key did not work in InDesign.
A bit of research and it turns out the MS Office has this as an option in their software. But I cannot find an option in InDesign preferences to make this work.
However, somethings are not listed in the shortcuts and preferences and are hidden triggers in InDesign which can be accessed through a script.
I'm not saying it's possible to activate the Insert Key through a script, but it's plausible that it can be activated.
Maybe ask on the scripting forum? InDesign Scripting
I know this may be a possibility as with InDesign's earlier versions of PDF export to interactive documents there previously was no way to export interactive pdfs as single pages if in Spreads.
But the option to toggle this setting was scriptable.

HT201328 Hey, i bought an iphone from online shop and its locked by orange france, i contact them to unlock it but they refused, they said that we regret to inform you that we'r not able to unlock second hand phones? I need your help please.

Hey, i bought an iphone from online shop as a used phone and its locked by orange france, i contact them to unlock it but they refused, they said that we regret to inform you that we'r not able to unlock second hand phones? I need your help please. Its not fair , apple should figure it out
Regards,
Orange

This is no different with any carrier locked phone. Getting a carrier locked phone officially unlocked is the responsibility of the carrier, not the cell phone manufacturer. A cell phone manufacture cannot unlock a carrier locked phone without the carrier's authorization.
An iPhone sold as officially unlocked when new can be used by others as a second hand phone, and the same with any carrier locked iPhone that can be unlocked by the carrier, and many carriers offer it.

HT4623 I. Tried many time to install my apple to update software but can't fix I need your help please and Thanks.

How i fix and software update i was tried but cant i need your help please and thanks.

"but cant"
That doesnt tell us anything useful. You need to post EXACTLY what you did and EXACTLY what happened, including any error messages.

Need Urgent help please? I need to restore from a previous iphone backup.

Oops, I admit it - I messed up but need help please?? I received a replacement iphone today. My broken iphone OS and my itunes had the latest software updates and I did a full backup before going to the store to get the rerplacement. However, when I got home with the replacement iphone and plugged it in, it asked if I wanted to update the OS on it. I made the mistake of saying yes. It then made a backup of the empty factory settings from the new replacement and restored from that rahter than the backup I made before going to the store. Yes I know I should have said no and just did the restore which would have resotred my previous backup that I made before going to the store. Then after everything would be allright I could have told it to update the OS.
You can slap my in the face or I will do it myslef for making such a stupid mistake. All ready did the "I should have had a V" thing to my forehead.
After seeing the restore was fromthe factory settings rather than my earlier good backup, I went into my documents and drilled down to the mobile sync backup and saw that one of the three folders (with giberish as a title) has a lot of information with the date and time I did the backup before going to the store.
Could I possibly delete the later (factory setting backup) folder and then do a restore to get my good backup onto the iphone? I didn't do that yet in fear that it might mess something else up on the iphone and I wanted to check with you experts here first for guidance and assistance, PLEASE?
I'll be anxiously awaiting any help you can give!
Thank you!!

rwmac22 wrote:
Hopt and OneOrangeTree, Thank you both very much for replying!!
It took me a long time to get back to the dissucison group because I tried both of your suggestions which therfore had to do about 4 restores. They take quite a while (about 50 minutes each actually). Your help got me half way there and is very apprecaited! I did manage (with your excellent help) to get most of my backup put onto the replaced iphone. the photos, music, and videos didn't get put over. I think I can move those back over by making sure they are selected in the seperate tabbed screens for the iphone. However, I can't get to those screens because every time I connect the iphone now, it brings up the "set up your phone screen". The one with the "an iphone has been previously synced with this compter" setup as new phone or restore from ....
Well I did the resotre from 3 times and that page still comes up when I plug in the iphone. Yes, I did close itunes, reboot the PC, and powered off the iphone and then brouhgt it back up before connecting (all several times), but itunes still takes me to the same "setup iphone screen".
Can you help me to get it to the standard iphone screen and there I will make sure the selected items are checked and do a sync.
Please know I do appreicate your kind assistance so far and hope someone can get me the rest of the way!
The "Backup" do not store your Applications, Music, Video's. It saves your settings, your application preferences, etc.

I am the biggest "Newb" on this site, and I really need some help please..

Ok, the short of it.... I started training on Database programming about 2 weeks ago. I still don't really know a thing, or even understand the concepts. Now, my boss wants me to fix a bug in Oracle, and I haven't a clue. The ONLY help I've gotten was a link to this forum, and a speech about how I need to help myself. I told him I have the same chance of fixing anything, as monkeys typing hamlet. Anyone up for a challenge?
When I go to Application System, then Application Entry and enter the password a dialog box appears.... "FRM-40039: Cannot attatch library Empower while opening from APPUSRAPP."
That's what I have to fix. I have no clue. I don't even really know how to click around in this program. Please help, someone.
UPDATE: I've been told that everyone's pretty much going to be a jerk to me for asking this, and I'm currently searching old threads and can't find a way to delete this one I posted. So, you could just ignore the post, or jump in and be the internet tough-guy and tell me what I already know.... I'm a newb.
Edited by: user11033020 on Apr 14, 2009 11:41 AM

As this appears to be a Forms error (the error begins with FRM) you might get a better response by posting this in the Forms forum:
Forms
The Community Feedback forum isn't meant for product-related questions (as it says in the title).
Still, you should consider searching Metalink as well. If you've paid for support, you have every right to use it.

My stupid iphone turned off sundenly and now is saying i have to connect to itunes and it wont connect to itunes i need ur HELP please please please!!!! whoever helps me u r an amazing person!!!!!

help please my iphone 4 turned off sundenly and now is not working its says to connect to itunes but when i get to itunes it shuts offf or doesnt work!!! i am depley need help!!! if anybody can help that wuold be amazing!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! HELP

The problem is your friend's music does not belong to you. It is owned by your friend.
I'm afraid you cannot do what you are trying to do. Restoring the iPhone is what you would have to do.
In the future, put your music on the computer and transfer it to the iPhone, not the other way.

Need big help creating PDF/X-1a compliant document.

Hi all,
I have tried this on my own but cannot make it work as I am not so computer savy. I have created all the files to specifications as best I can but when I try and use the preset PDF/X-1a it says violation both artbox and trimbox for every page. Ive tried fixing this manually and by using Preflight but it doesnt work for me. Can someone please help me create a PDF/X-1a complient document? I am desperate as I am trying to do this for a friend who needs my help. Looking for a good savior/Samaratin for help. My email is [email removed by host] Any help at all would be greatly appreciated either in an answer here or an email.
Thank you in advance

I create the files in photoshop and saved as PDF with the preset PDF/X-1a_2001 but I cant or at least I dont know how to define the bounding boxes like Trim Box and etc. in photoshop. The problem I am facing is that the pages are supposed to be set as 11.5 x8.75 for printing at 11.0 and 8.5. So I made my files the 11.5 x 8.75 size but now I cant set them to be printed at the right size(if that makes any sense-sorry I am a noob). So I am not sure what to do. I thought saving it as a PDF in photoshop and then fixing it in Acrobat was what I was supposed to do? I tried manually to set the artbox to 0 and set the trimbox to where it needed to be 11.0x8.5 with different parts cut off for the odds and even pages. But still when I try to save as PDF/X-1a it gives me error messages. I have searched the web but cant figure it out. It seems so easy for people to do it but I cant figure it out and I am panicking and need help. Can anyone help me?

Big help please: DC is not responding on host in hyperv

Hi i really need someone help
i have 2 host : host1 and host 2
i can connecto to host1
i cannot connect to host2 du to RPC error, i guess it's because my client and my server are not using the same login
host1 is using the same login on client and server
my domain controller is in host 2.
when im trying to change the host2 login to make it same as client it'says it can reach the DC.
so the host2 is down, the DC is down
how i can bypass the DC to change the login?
i have DC replica on host1 but i can start it cause it says the replication is on going , for that i need access host2 to stop it
1. i tried in powershell to stop the replication to my DC replicate didnt work
2. i tried to put host2 on workgroup in order to change login i cant cause it 's asking me for domain/admin to do so
i create another DC with another adress; i change host2 ip dnd adress but still it says cant reach the DC.
please help my host2 host the DC and i cant do anything without it
Thanks to help

Hi test12test,
Didk you try to use HVRemote to build the connection between "client" and "server" :
https://code.msdn.microsoft.com/windowsdesktop/Hyper-V-Remote-Management-26d127c6
Best Regards
Elton Ji
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

I need your help, please. I can't get my photostream synchronized

Dear friends, I need your help again!!!
My photostream from my computer, windows vista, is not updating the pictures on my photostream in neither one of my IOS devices.
I'm sure that the photostream in both IOS are turned on. In my computer it is also turned on.
For example, I tranferred some pictures from a normal file to the photostream in the computer and I expected that them went also to my
iphone and ipad, but it not occurred.
Please, do you have some advise for me?
Thanks in advance.

first i would try a simple restart of your computer and your iPad and see if they show up after they reboot. Also which folder are you putting them in? on windows there will be a seperate folder in the photostream folder that will show upload/uploads you will want to make sure they are in there. Also here are some basics about photostream to make sure you are meeting all the requirements and are not over your limit, http://support.apple.com/kb/HT4486

Really really need some help please.

lost all my audio. nothing plays anymore. cant even hear the trash empty any more. no itunes, nothing. no dvd audio. also noticed itunes wont play songs anymore, progress bar just sits there. also movies on youtube dont play anymore. when i try to turn up audio i get a zero symbol with a slash thru it. im stumped. help please. thanks

Whatever has happened, I've assumed it just happened and is systemic.
To start: Go to Applications/Utilities and run Disk Utility, select your startup drive, and click on the Repair Permissions button at the bottom of the window.
If that works, you're done, if not, pull out your Tiger startup DVD, insert it, select the Installer, and Restart your Mac from the DVD. When you get to the installer screen, go to the menus at the top of the screen and select Disk Utility, and this time click on the Repair Disk button. This will check your file system integrity and repair it.
When you've done that, post back.
If those don't work, you may need to do an Archive & Install, from this same DVD. This will preserve your accounts/apps/data, but will require you to repeatedly run Software Update to bring everything current again.
Good Luck...

NEED BIG HELP PLEASE!!!!!

Similar Messages

Maybe you are looking for