Need bios for 2 580 twin frozr/oc .

Question

 Card #1
sn: 602-v255-01sb1101008767
dafault: 823/1645/2138 1.000v
target (use it now with ab) 822/1645/2138 1.025v or 1.038v
Card #2
sn: 602-v255-01sb1101008737
dafault: 823/1645/2138 1.013v
target (use it now with ab) 822/1645/2138 1.025v or 1.038v
The reason I put 1.025v or 1.038 is because both those volts are stable on both cards individually and in sli so I'm not sure which is better to use.
Also , I have a problem with heat on the #1 card while they are in sli (no problems what so ever with heat while by themselves) but in sli the #1 card gets up to 97c so I'm hoping it's just because the cards sit right next to each other on my Gigabyte ex58-UD3R which I will be getting another MB that I can do sli with a gap in between or could the heat be from something else like my evga sli bridge ?  
I also have problems with the screen becoming all fuzzy and red from Stalker COP and it also happened when playing Metro 2033 but that went away after I reinstalled the nvid 266.58 drivers.
I haven't been able to test Stalker cop again in sli because the heat is scaring me.(the red fuzzy thing has never happened while in single mode)
Could this also be the sli bridge I'm using ?
i7 920-Zalman 9700 / GA EX58-UD3R / MSIx2 580 Twin Frozr II/oc / 3x2g 1333 / Cougar sx850w / Silverstone Raven 2ew

Answer 1

Got my 1155 set up going now msi p67a gd65 b3 and the two 580oc twin frozrs and it's running nice and cool (70c load 38 idle) and thats the highest card.
I'm using the msi sli bridge that cam with the gd65 b3 and the temps are great and 3dMark 11 adv ran like butter and so did the Heaven 2 benchmark, Lost Planet 2 and GTA4 gay tony both ran fine all the way through with no problems but lower fps than with only one card.
Stalker COP bench mark is still turning my screen green though ? had the same problem before with Metro 2033 but haven't tried it on the new board.
Running both cards at 1.000v 800 1600 2048 via AB and everything else is at default for now.  
Just ran Dirt2 bench in ultra got 61fps but when I quit and it went to the desk top it was all static looking but not green this time and I opened up the display panel and changed my res which made the static go away than I just put it back to 1920x1080 and all is good but I have to figure out how to stop the static krap, I thought it might just be dx11 but Lost Planet 2 dx11 bench had no problem ? ... the search continues.
Temp finally went up to 81c with Dirt2 on ultra , but it played just fine the couple of races I did in normal single player mode but when going back to the desktop it's always static looking which seems to change colors. ?
(https://home.comcast.net/~ptown57/grn.jpg) pic of green screen during Stalker COP benchmark. 
(https://home.comcast.net/~ptown57/prpl.jpg) pic after playing Dirt 2 just fine.
Played Bulletstorm for about an hour with no problems and no messed up screen during or after plus the temps never got passed 70c but I know it's just dx10.
i5 2500k/msi p67a gd65 b3/580 twin frozr oc sli/g skill rj's 2x2 1600/Cougar sx850w/Silverstone Raven 2ew/