Need BIOS for MSI GF615M-P33 V1.2
I need the latest BIOS version for model GF615M-P33 V1.2(FOR EUP)
Live BIOS doesn't works at my pc
Quote from: spinalgr1998 on 28-March-15, 17:17:41
mainboard S/N is MS-7597 VER 1.1
That's not the S/N. You can find the S/N on a white sticker on the box or on the back of the board:
Example:
(board)
(box)
Quote from: spinalgr1998 on 28-March-15, 17:17:41
I can't find BIOS ID.
Follow Svet's advice:
Quote from: Svet on 24-March-15, 22:31:04
list full BIOS ID look for it in BIOS Setup [or during bios post screen press "pause" key]
Similar Messages
-
Help !! Need Bios For MSI GFFX 5900 VTD
I Need Original Bios For GFFX 5900 VTD !!
Send To: [email protected]
or leave post reply.Seems like we'll have to wait for someone to tw33k the VGA BIOS for MSI's FX5900 series VGA card... Else I'll be stuck with my paperweights VGA cards now...
I want to see better results on my MSIs' FX5950U vs FX5900U vs FX5900 non-U... Till date, the best card I've o/c'ed is the FX5950U at 1.05GHz, FX5900U at 990MHz and FX5900 non-U at 950MHz...
Though it seems that the memory clock has the capability to o/c even more one after another but the 3D clock is still not more than 560MHz for all 3... and 3DMarks no big difference... Maybe due to my system's bottleneck problems also... -
HELP! Needing BIOS for MSI RX3870-T2D512E not RX3870-T2D512E-OC
Hi all,
Could someone please post the original BIOS for MSI RX3870-T2D512E (not overclocked)? I am having problems with my RX3870-T2D512E-OC and I need to underclock it to RX3870-T2D512E. The original BIOS is required so that Live Update would work.
Thanks.Quote from: wildwild on 09-August-09, 09:28:59
Hi all,
Could someone please post the original BIOS for MSI RX3870-T2D512E (not overclocked)? I am having problems with my RX3870-T2D512E-OC and I need to underclock it to RX3870-T2D512E. The original BIOS is required so that Live Update would work.
Thanks.
Umf.. that crossflash can kill your VGA and void your warranty..
Quote
I am having problems with my RX3870-T2D512E-OC and I need to underclock it to RX3870-T2D512E.
Do it with software or RMA the VGA if its proved that's VGA fault. -
Hi
I need a bios for motherboard ms-7360 ver:1.0 p35 Neo , the cip is A7360 ims.100
and i need a how to boot this bios ( instruction )
Tnx to all for help
AndrejQuote from: Henry on 08-August-10, 04:22:06
What parts are in your PC? Read this and provide information asked for. >> Posting Guide <<
Before you attempt to flash the BIOS let us help you find the cause of your problem first.
Correct BIOS for your MB is here, the BIOS for G33 Neo is the same as for your P35 Neo, BIOS 7360v1xx P35/G33 Neo BIOS 1xx <<
>> Use the MSI HQ Forum USB flasher <<
my parts in computer are
motherboard : MSI P35 Neo (MS-7360) (2 PCI, 3 PCI-E x1, 1 PCI-E x16, 4 DDR2 DIMM, Audio, Gigabit LAN
Čipset motherboard : Intel Bearlake P35 Memory Timings 5-5-5-18 (CL-RCD-RP-RAS)
ram ddr :transcend 2 x 1g
pqi 2x1g
DIMM1: Power Quotient 1 GB DDR2-800 DDR2 SDRAM (5-5-5-18 @ 400 MHz) (4-4-4-12 @ 266 MHz) (3-3-3-9 @ 200 MHz)
DIMM2: Power Quotient 1 GB DDR2-800 DDR2 SDRAM (5-5-5-18 @ 400 MHz) (4-4-4-12 @ 266 MHz) (3-3-3-9 @ 200 MHz)
DIMM3: Power Quotient 1 GB DDR2-800 DDR2 SDRAM (5-5-5-18 @ 400 MHz) (4-4-4-12 @ 266 MHz) (3-3-3-9 @ 200 MHz)
DIMM4: Power Quotient 1 GB DDR2-800 DDR2 SDRAM (5-5-5-18 @ 400 MHz) (4-4-4-12 @ 266 MHz) (3-3-3-9 @ 200 MHz)
graphic card : gigabyte geforce 8600gt with cooler zalman vf1000
GPU Codename G84GT (PCI Express 1.0 x16 10DE / 0402, Rev A2)
GPU takt (Geometric Domain) 540 MHz (original: 600 MHz)
GPU takt (Shader Domain) 1188 MHz (original: 1450 MHz)
procesor : DualCore Intel Core 2 Duo E6420, 2133 MHz
Multi CPU:
ID osnovne plošče TEMPLATE ETEMPLATE
CPU #1 Intel® Core™2 CPU 6420 @ 2.13GHz, 2135 MHz
CPU #2 Intel® Core™2 CPU 6420 @ 2.13GHz, 2135 MHz
otside takt 267 MHz
moment takt 2136 MHz
Tip Central Processor
power 1.3 V
lan : Realtek RTL8168/8111 PCI-E Gigabit Ethernet NIC
power suply : hck usp 5580
CPU core 1.34 V
+3.3 V 3.31 V 32A
+5 V 5.05 V 35A
+12 V 11.97 V 30A
+3.3 V Standby 3.33 V
-12V 0.5A
+5Vsb 2.5A
dvd rom : +5Vsb 2.5A
TSSTcorp CD/DVDW SH-S162L
hdd : WDC WD1600JS-22MHB0
os : windows xp sp3 -
MSI GF615M-P33 without LAN driver.
I put together a pc with the MSI GF615M-P33 yesterday. With the CD from MSI I was able to install the drivers for Chip, Sound, CPU.
Now, I was not able to press neither the "LAN" or "RAID" buttons in the program to start installing the drivers for this.
The only LAN driver I found for MSI GF615M-P33 was at msi.com. But only for 32-bit Vista. I use Windows 7 64-bit.
Can someone tell me where to find drivers? Really need to get my webconnection up and running as fast as possible!
PC Specs
# Cooler Master Elite 310 Black/Blue Fans: 1x 120mm rear, ATX, mATX, 2x USB, 1x Audio, 17 dBA
# Silver Power SP-400P2C 400W Super Low Noise, 2x PCIe, 12cm Fan
# AMD Athlon II X2 250, 3,0Ghz, AM3, 2MB, 65W, Boxed
# Kingston ValueR. DDR3 1333MHz 4GB, CL9, Kit w/two matched ValueRAM 2GB DDR3
# MSI GF615M-P33, Socket-AM3, m-ATX, GeForce 6150se, DDR3,SATAII, GbLAN, PCI-Ex16
# Sapphire Radeon HD 4670 512MB GDDR3 PCI-Express 2.0, DVI-I, native-HDMI, HDCP, Lite-Retail
# Seagate Barracuda 7200.12 500GB SATA-300, 16MB, 7200RPMQuote from: Fredrik on 19-January-10, 05:13:18
I think you have to find out at Realtek's site if they have come up with drivers:
"Supports 10/100/1000 Fast Ethernet by Realtek 8211CL."
...Can't find any by a quick glance. It wont work with Windows 7 own drivers?
The Realtek's pages has no drivers for the 8211CL, tried that yesterday.. Doesn't seem like Win7 works with it...
Quote from: adamantine on 19-January-10, 05:21:35
I'm not sure, but the standard nforce driver may have installed the LAN drivers for you.
I just downloaded newest nForce and geforce drivers fron NVIDIA, everything including LAN works except audio (which I disabled anyway). It shows up on device manager as "nForce Ethernet" or something like that.
Good luck!
I will try that.
Thanks for both answers! -
MSI GF615M-P33 problem with sb audigy se
Hi everyone
First of all in case it's useful, here's my system:
Windows xp sp2 32bit
AMD Athlon X2 240 2.8GHz Socket AM3 2MB
MSI GF615M-P33 GeForce 6150SE Socket AM3
Asus Radeon X1550 512mb (old card works fine)
Sound Blaster Audigy SE
Crucial 2GB DDR3 1333MHz/PC3-10600 Memory CL9 1.5V
0 Maxtor 80GB SATAII 7200rpm 8MB Cache
1 Maxtor 250GB SATAII 7200rpm 8MB Cache
G7 680 watt psu
So this is my third msi board and everything is fine except windows is giving me this error code: Your computer's system firmware does not include enough information to properly configure and use this device (sound blaster audigy). To use this device, contact your computer manufacturer to obtain a firmware or BIOS update. (Code 35).
I had a look at what I think is the bios version according to the boot screen A7597nms V2.0 123109 (does this look right?). Also, the advertised version of my board had a red pcb, mine is black and the version is 1.2, don't know if that's important, mentioning anyway.
Now I know the card works with the board because I did something slightly different, (just to see if it would work and save time). After building the computer I didn't reformat the hard drive from the previous mother board, just plugged it in and installed the new chipset drivers etc. Everything fine, soundcard working, except the cpu was only in single core and running very cool; less than 30 degrees c. So, decided to reformat properly, all good, cpu in multi and running around 40 degrees c, but just this problem with the sound card.
Another difference I notice is in windows control panel under Power Options I can't enable 'advanced power management' the option isn't there, so have to switch of the computer manually (which isn't a major problem). In the bios I always disable ACPI as I run a lot of audio processing software and according to some stuff I've read, can cause problems with irq's and all that technical stuff that I don't know much about.
Anyway, to the point. My question is: do I need to update the bios to 2.1 or would it be better to buy a new sound card. I've tried various bios settings and updating the drivers but makes no difference. I've even reinstalled windows with acpi enabled, again, the same error code.
Any help/questions much appreciated. Hope I've explained this well enough.Quote
So this is my third msi board and everything is fine except windows is giving me this error code: Your computer's system firmware does not include enough information to properly configure and use this device (sound blaster audigy). To use this device, contact your computer manufacturer to obtain a firmware or BIOS update. (Code 35)
Quote
In the bios I always disable ACPI as I run a lot of audio processing software and according to some stuff I've read, can cause problems with irq's and all that technical stuff that I don't know much about.
What HAL is installed? Look in device manager under "Computer" -
VGA BIOS for MSI RADEON R9 270 GAMING
Can someone please post me a BIOS for VGA BIOS for MSI RADEON R9 270 GAMING?
I flashed mine with the wrong BIOS and realised to late that the BIOS backup did not actually work. This is the 270 and not the 270x. Any help would be appreciated.There seems to be none so far: >>How to contact MSI.<<
I removed the other line. Better don't mention the payment method again. Also such reward is not needed. Either there's such file from MSI or not. -
Request UEFI / GOP bios for MSI R7950 TF 3GD5/OC BE
I need a Biosfile for my UEFI / GOP bios for MSI R7950 TF 3GD5/OC BE.
SN: 602-277-130B1308049407
Bios Revision:015.031.000.001
h***s://skydrive.live.com/redir?resid=72007DCEBD24DB0E!2251&authkey=!AI09801QvTZ1ALohere it is
-
Can you tell me the latest bios for msi r9 280x ? the attachment hows my current bios.
Quote from: moblawski on Yesterday at 15:54:05I've had this issue before, but not on a MSI laptop.
The solution or problem was, that the memory timings set by the controller, was to low compared to manufactures.
Now ... -
I have to report you about bugs in latest BIOS for MSI-6545 ver.1 (ver
I have to report you about bugs in latest BIOS for MSI-6545 ver.1 (version BIOS 1.7).
After flashig BIOS I cannot change parameters "Shutdown temperatures", "Spread spectrum" and some others !!!
When I try to do it, my computer hangs.
I have CPU PIV-2.4-400-512 with memory 512MB Samsung original PC-800 ECC
(By the way,there was no problems with BIOS 1.5 and CPU Intel PIV-1.6)
[email protected]I have also noticed that the bios write protect control is missing.
I don't know the reason why it's been removed but if you want to protect your bios you can set the jumper (J16) on your motherboard.
If the jumper (J16) is shorted (Little plastic thing conecting both pins together) then the bios flash is locked and can't be updated.
If the jumper (J16) is not shorted (Little plastic thing removed) then the bios flash is unlocked.
Also can anyone tell me if two gameports are listed in the Device Manager after clearing cmos using bios 1.7.
Bios 1.5 is ok apart from the fact that i can't upgrade my processor to 2.6GHz as it only supports up to 2.2GHz so if i upgrade processor i won't be able to clear cmos because of the problem with the gameports.
I have tried everything to get rid of one of the gameports but nothing seems to work apart from going back to bios 1.5 which is no good because i wan't to upgrade my processor. -
New Bios For MSI K8N Neo Platinum [ 1.55]
NEW BIOS FOR MSI K8N Neo Platinum !!!!
BIOS 1.55 FOR K8N
AND CLICK
Apothikeusi/Emfanisi (Greek Language )
Your CPU temperature is in the safe range. Please rest assured. If you are
willing to, would you please flash BIOS to the version 1.55 verifying? We
send it by attachment. As to how to flash BIOS, please refer to the word file
in the attached file. Please kindly inform us of the results. Thanks for your
cooperation.
In addition, please enter BIOS to load optimized defaults after flashing BIOS.
Please feel free to let us know if you still have any further issues or inquiries.
Best regards,
MSI Technical SupportOMG !!!!
Something is really weird about this bios !!!!
I can't boot overclocked from bios even at 220 HT, and at the beginning i was REALY disapointed.
Then i set it to optimize defaults ( and yes i did the whole flashing thing ) and i am now IN WINDOWS with my cheapo Kingston Value that did MAX 230 with problems NOW AT A WOOPING 237 Mhz and still going UP !!!!
OMG OMG....
If only i can get it to boot from bios.Seems pretty stable in windows even at 237.
Really strange guys.I thought 230 was my memory limit....
Gonna try higher and let you know.
P.S. this bios seems to like Kinston Ram....Value at least -
Request UEFI / GOP bios for MSI N770 TF 2GD5/OC
Hello,
Could I get the UEFI / GOP bios for MSI N770 TF 2GD5/OC. My cards serial number is 602-V282-23SB1308010699
Thanks in advance
Black23here it is
-
Anyone have the moded 3.0F Bios for MSI U100?
Anyone have the moded 3.0F Bios for MSI U100?
Svet hasn't got round to updating the Wind U100 BIOS yet, so keep an eye on this thread, it will appear there when done:
https://forum-en.msi.com/index.php?topic=121232.0 -
HELP! MSI GF615M-P33 7597 Ver 1.3 BIOS needed!
Hallo!
Please help. on GF615M-P33 7597 Ver 1.3 (!!Ver1.3!!) BIOS crashes :( But Bootlock is alive and Ctrl+Home works ok.
I cant find BIOS for this motherboard.
Please make a dump of this bios if you have same ver 1.3 http://www.msi.com/index.php?func=proddesc&maincat_no=1&cat2_no=171&prod_no=2134 motherboard and send me **Email-Address removed to protect user from spam**
best regards! Pavelhttp://www.msi.com/product/mb/GF615M-P33-V2.html#/?div=BIOS
sn: 601-7597-100b1008615634
when i put the 3 files on my usb stick, an then go on my msi pc i put in usb port and go on my pc.
they print me on the screen:
"FILE NOT FOUND
PLEASE COPY LAST BIOS.... ..."
i would like to download the bios from the site but is only live update5.
My MSI pc is bios cleaned in the moment i work with him i'm not put upgrade or anything else but i work for my office and in a moment they say me this....
:bonk:Virus??? i'm not understand!!!! -
HELP!!!!I need UEFI GOP BIOS for MSI R7870 HAWK 2G
Hi,could i get a uefi gop BIOS for my R7870 HAWK 2G?
Serial Number is: 602-V281-08SC1303005833
This is my rom file :http://pan.baidu.com/share/link?shareid=2536655492&uk=4244730218
Thanks!here it is
Maybe you are looking for
-
Ipod Classic Won't Sync with ITunes - Windows 7
I've been having some problems syncing my Ipod up with my Itunes. The last time I had a successful sync up was probably 2 and a half weeks ago. I've tried multiple solutions already but havne't had any success yet. I tried reinstalling itunes, swi
-
how come i was upgraded iso6 on my iPhone, but now I couldn't link up to iCloud, it keeps asking my icloud password then failed login. But my iPad upgraded it works!! how to solve my iPhone using iCloud?
-
Photos not appearing in photostream
I have updated my iphone 4s to ios 7.0.3. Now when I take photos they are not appearing in my photostream. I always take photos by going into the app, never the lockscreen.
-
Check list for automatic accounting document creation
Sir, I have created a new depot [ STO process ] After that I tested SOP in development server, and could successfully create sales order, delivery, billing, accounting document. Accounting document was automatically created at the time of VF01. But i
-
Where are my subscriptions so I can cancel them
Hello, Where are my subsciption info I am being charged over and over when i add another mini for example, I think I'm paying double in cases. I have way too many online stuff to read. Can you help me ? thank you.