Need bios reset for hp dv 40000 I hit 3 time error code is09924
I need to reset Bios password for hp dv4000 I hit it 3 time error code 09924
Hi,
Try entering: pjfgn
or
wpkkxh
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience
Similar Messages
-
Need password reset for hp mini 1101
need password reset for hp mini 1101cnu932bkxrplease help
Hi: Please read this post which should resolve your dilemma. http://h30434.www3.hp.com/t5/Notebook-Operating-Systems-and-Software/System-Halt... Then... You can: 1. Use the unlock code you generated to enter the BIOS
2. Disable all passwords that are enabled in the BIOS's security menu.
3. If asked for current password - type the unlock code
4. For new password, just press ENTER key
5. Repeat the same for verify password column. -
Need password reset for HP LaserJet M1536dnf MFP the same as others on this forum.
I have the same M1536dnf password problem here, I can't access the settings.
I can't activate the duplex mode without it.
ThanksHi @HPFix7,
I see that you need the reset for the printer. I can help you.
I can send you that information in a private message.
In the forum beside your handle name just click on the envelope to view it.
Have a wonderful day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP -
I need bios pass for compaq 110c -CNU9310QNC
Help me plz i need bios pass for comaq 110 -CNU93101NC
Hello nersongr,
I see that you are having a problem with your BIOS password. You should post your message in this thread. The thread has numerous users with the same issues. This will get you the best chance of getting help with your problem.
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓ -
Satellite A200-23U - Need Bios update for XP
Hi!
Where I can find BIOS update for this notebook for Windows XP?
Thanks.> Is it possible install other similar BIOS for XP from the Toshiba American driver page? Are there some forecasts for appearance of BIOS XP update on the Toshiba European driver page?
I would not recommend installing different BIOS updates from different notebook series on the Satellite A200-23U.
The point is that a wrong BIOS or not compatible BIOS can damage the ROM module or the motherboard!!!
I would not risk this!!!
Fact is that you should update the BIOS only with the version which was designed and published especially for your notebook model. -
I need bios file for msi fx5900xt-vtd128, please
please send me the bios file of these videocard
[email protected]Hi, what happend? why do you need Bios file? try installing Live update. I think several members of the forum hav that card, Osnavi if Im wrong have it. You could try also this page:
http://www.mvktech.net/component/option,com_remository/Itemid,26/func,selectfolder/cat,81/page,4/ -
Please help me with bios reset password HP pavilion dv4000 - system disabled - 13179 --- s/n (Personal information removed by moderator) - p/n EC329UA#ABA
Thank youWithout the DriveLock password there is no way to access the drive.
Since the DriveLock password is specific to the hard drive I believe your only choice is to replace the drive. You cannot disable or remove DriveLock protection without the password.
Related Info:
DriveLock Hard Drive Protection -
i sold my laptop on craigs.. week later guy says it freezes during boot
me being a nice i figure i'll give refund then just do restore..
but when i get home i get admin password and cant do anything,
and the guy won't return my texts or calls!
so if anyone can please give me reset for
51276377
This question was solved.
View Solution.Dan try.
44154979
REO
I must inform you that these services are not endorsed by HP, and that HP is not responsible for any damage that may arise to your system by using these services. Please be aware that you do this at your own risk.
HP Expert Tester "Now testing HP Pavilion 15t i3-4030U Win8.1, 6GB RAM and 750GB HDD"
Loaner Program”HP Split 13 x2 13r010dx i3-4012Y Win8.1, 4GB RAM and 500GB Hybrid HDD”
Microsoft Registered Refurbisher
Registered Microsoft Partner
Apple Certified Macintosh Technician Certification in progress. -
P43 Neo-3 Board needs cmos reset for each restart
Greetings, thanks to help from this board, I fixed an earlier problem, but I'm still having one issue. I updated to the bios recommended for my cpu (the 7514v15.zip file installed via the usb method recommended on this site), and when I start up the computer (immediately after clearing cmos), it says that the bios is incorrect. If I go into the bios from there, I have tried 1) loading the default settings and 2) loading optimized settings. Each of those allows me to get into the OS and everything works normally, but if I restart, all of the fans start, etc for about 5 sec and go off about 5 sec, and this pattern repeats without a signal getting to the computer. If I clear cmos, it works again, but gives me the bios error that I mentioned above.
Any suggestions?
Here's the gear (all new):
N82E16820231209 MEM 2Gx2|GSK F2-6400CL4D-4GBPI-B R http://www.newegg.com/Product/Product.aspx?Item=N82E16820231209&Tpk=N82E16820231209
N82E16819115037 CPU INTEL|C2D E8400 3G 775 45N R (E0 stepping) (coolermaster cooling)
N82E16813130185 MB MSI P43 NEO3-F 775 RT
N82E16814150316 VGA XFX PVT98GYDLU 9800GT 512M RT
N82E16817341016 PSU OCZ|OCZ500MXSP 500W RT http://www.newegg.com/Product/Product.aspx?Item=N82E16817341016&Tpk=N82E16817341016
N82E16811129021 CASE ANTEC|NINE HUNDRED BK RTThat's not BIOS problem, you have some sort of instability.
Test with just one memory stick only.
Try bump memory voltage to 2.1V in BIOS and use 2T.
Test each one memory stick alone with >>Memtest86<< -
Hi,
I am going to apply bundle patch and my oracle database is 11.2.0.2 and platform Microsoft Windows x86. As per the read me file Oracle recommends that to use OPatch utility release 11.2.0.1.3 or later.To check the accessibility to the inventory i use %ORACLE_HOME%/OPatch/opatch lsinventory command.
It ended up with giving below details.
Invoking OPatch 11.2.0.1.1
OPatch could not create/open history file for writing : ***my oracle home path***\cfgtoollogs\opatch\opatch_history.txt
**oracle_home***\cfgtoollogs\opatch\opatch_history.txt (Access is denied)
Oracle Interim Patch Installer version 11.2.0.1.1
Copyright (c) 2009, Oracle Corporation. All rights reserved.
OPatch could not open log file, logging will not be possible
Oracle Home : *****
Central Inventory : C:\Program Files\Oracle\Inventory
from : n/a
OPatch version : 11.2.0.1.1
OUI version : 11.2.0.2.0
OUI location : **ORACLE_HOME***\oui
Log file location : **ORACLE_HOME**\cfgtoollogs\opatch\opatch2015-04-09_16-27-49PM.log
Patch history file: **ORACLE_HOME**\cfgtoollogs\opatch\opatch_history.txt
Inventory load failed... OPatch cannot load inventory for the given Oracle Home.
LsInventorySession failed: LsInventory cannot create the log directory **ORACLE_HOME***\cfgtoollogs\opatch\lsinv\lsinventory2015-04-
09_16-27-49PM.txt
OPatch failed with error code = 73
Can anyone please help me to solve this?
Do I need to install latest opatch utility?Hi,
this error message " LsInventorySession failed: LsInventory cannot create the log directory **ORACLE_HOME***\cfgtoollogs\opatch\lsinv\lsinventory2015-04-
09_16-27-49PM.txt "
indicates that you have permission issue with your file systems : ORACLE_HOME/cfgtoollogs/opatch
double check the owner of this file system.
Regards, -
I need BIOS setup for 5005-S504
Hello,
I no longer have the original disks, the laptop was OFF for 8 years and the CMOS battery was dead. Windows was corrupt and I installed Win Vista. I need to access the BIOS but the Win XP HardWare utility download won't run in VISTA. Hitting ESC when it boots doesn't work. F2 doesn't either.
How can I access the BIOS setup screens? Is their a reset button somewhere on the motherboard?
Any help appeciated.Satellite 5005-S504
You might try one of the methods mentioned in here.
BIOS Setup / BIOS settings -- access instructions
If the Esc key doesn't work, you're probably out of luck. Why Vista?
Can you boot to DOS, BTW?
-Jerry -
Need BIOS Settings for 180 and AMD XP2400+
Greetings all.
Here is my configuration;
MSI Mega 180 Deluxe
Western Digital 200GB 7200rpm
Athlon XP2400+ Thoroughbred
1x DDR400 512MB PC3200 (Infineon w/Heatsink)
Sony DVD+/-R Dual layer Drive
Gigabyte FX5200 128MB TV out/DVI
MS Windows XP Pro SP2
This is the 1st system I have built and I am a bit confused on what to set in the BIOS to get my processor running at its rated speed. The BIOS reports it at 1.84ghz. I set the FSB to 166. What else do I need to do (and where do I look) to remedy this?
CPU Spd 3700
Sys 46c
CPU 58c
With WinAmp playing and writing this.
Artic Silver on the Heatsink.
I have searched the messages on this forum but find nothing that answers my questions.
Thanks for your responses.Update:
I emailed MSI tech support with the problem and this is what they said:
Dear Customer,
Update the bios to version 3.5, which you can download from this link. And set the cpu fsb to 133 for a thoroughbred cpu, and 166 for a sempron cpu.
http://www.msi.com.tw/program/support/bios/bos/spt_bos_detail.php?UID=546&kind=4
Sincerely,
Technical Support Division
MSI Computer Corp.
MSI Platinum Series Motherboards -- In Pursuit of Quality Perfection.
http://www.msicomputer.com
1.626.913.0828
1.626.581.7721 Fax
Did what they said.
Set FSB to 133
BIOS says 1433 mhz. No change from before.
I reset the FSB to 166 and it now runs at 1866 mhz (rated 2ghz)
As far as the cooling problem, I haven't touched the Heatsink/Cooling fans yet.
Temp dropped when I lowered the FSB.
I bolted a 92mm Fan to the outside of the case (Biohazard grille) and the temp now runs at 48c CPU and 36c Chassis.
Plan to do the fan reversal this weekend and maybe the lapping. -
Need BIOS backup for G480 Model NO 20149(Old version BIOS)
Hi, Those who have Lenovo G480 Model No: 20149, I really need your cooporation to provide me your BIOS backup of OLDER version (The newest version is V9.01). My BIOS information is 5ECN96WW after updated to the newest version. Im requesting this due to performances issues I faced after updated bios to the latest version (laptop seemed to boot slower). Please help me. I need to restore my BIOS to the older version thus I will need the BIOS.rom file.
You can use Universal BIOS Backup Toolkit 2.0(google it) to backup your BIOS. Click Read then wait for it to read then click backup after that. Save the backup file and upload it to the Internet and provide me the download link.
I've used this program to backup my bios and it worked fine. Thank you for your help.
Solved!
Go to Solution.Hi kenpeacez,
thanks for posting. Was rrading through your thread and was wondering if you could explain the issue you're facing upon updating the BIOS.
you mentioned in your post that you saw some performance changes. could you explain that in a little but more detail. Let me see what i can do help you in regards to this.
Hope to hear back.
Regards -
Need BIOS password for old ACS SE
We recently upgraded our ACS SE 1112 to a SE 1113 model. The trade allows us to keep the old hardware. I want to use it for a test Windows or Linux server, however I can't seem to be able to break out of the locked-down Windows boot sequence. Occasionally I am able to press enough keys to get what looks like a BIOS password prompt. Does anyone know what that is?
Thanks for the suggestion. I get challenged with 3 password prompts when I hit F12 during the boot sequence and neither password works. In fact, I'm not sure that is the BIOS password. But I did open a TAC case and they suggested removing the CMOS battery....which worked. Here's the sequence if I had to do it all over again:
1) boot with a diskette to find a utility to remove the master boot record. I used a 3x diskette OS/2 and used FDISK.
2) remove the cover. Take out the CMOS battery. Wait a minute or two and put it back in place.
3) reboot. Do not (yet) select F1 to setup the BIOS. Just hit the prompt to continue booting. The default boot sequence will boot from the CD.
4) Install your OS from the CD. During the install process if the box needs to reboot, do not (yet) hit F1.
5) after installation of the OS, at the next reboot, select F1 at the prompt, set up the BIOS (date/time, etc), exit and save.
It must have something to do with the SATA drive/controller and the IDE controller on the system board - but I could not find the correct BIOS settings to allow me to boot from CD if I pressed F1 after removing the CMOS battery and saved the BIOS configuration. -
I just tried to install a new operating system on my old laptop and I am stuck with a black screen. I'm guessing the BIOS has an incorrect boot order but after 10 years I have no idea what the BIOS password is.
It is an HP Pavillion dv5170us. After 3 failed attempts, I get a "System Disabled [09122]" error.
Is there a code I can type to reset the password? Or maybe instructrions for a jumper reset?
Thank you for your time,
Trevor
This question was solved.
View Solution.Hi,
Enter: jsysw
or
zimvm
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience
Maybe you are looking for
-
Ipod 5th generation started loosing its battery really fast and now it wont even turn on.
My iPod 5th generation is just over a year old and its screen is a bit cracked. a couple of months ago it started to keep its battery less and less and it would go to 100% battery after a couple of minutes and then when unplugged it would die just as
-
Locking "Clea Form" with signatures
I've created a fillable form and have inserted 3 sections. At the end of section one an employee is required to add their signature. In that signature box property I have set it so that once the signature is applied all form fields selected become re
-
Hi, Im unable to send the mail to multiple mailid. In the selection i have given sel_mail as select options.Do i need to declare or initilize this select option with slectionoption parameters/attributes? FM - SO_DOCUMENT_SEND_API1 The code is- Im loo
-
Hi, Additional Excise Duty values and RG23AAED are not appearing in J2IUN for utilization. In configuration i assigned the all necessary gl accounts to UTLZ with subtransaction type IP. in J2IUN i am not able to get the head of RGA23 AED not appearin
-
Packet Loss?? Need help!
Over the past week I've been getting massive problems when gaming online with iRacing. I get halfway through a race and then I get kicked due to packet loss. I did some ping tests and sure enough im losing between 2-5% of the total packets that were