Need Business Content (BI) on MRSS Datasources- /MRSS/RM_DS0001,/MRSS/RM_DS0002,/MRSS/RM_DS0003 and /MRSS/QUAL_DS0001

Hi All,
We have a requirement of finding the Business Content Extractors, DSO's, Infocubes, Multiproviders and Queries for the below Datasources.
/MRSS/RM_DS0001
RM Request Role
/MRSS/RM_DS0002
RM Request Role
  Status
/MRSS/RM_DS0003
RM Candidate Status
/MRSS/QUAL_DS0001
Requirement Profile:
  Structured Qualifications
Please provide the suitable BI Content for the above extractors.
Thanks,
Purushotham.

Hi,
i think you know the data sources.
if yes then thru them you can find application component at RSA5.
once you got the application component, search for the same application component at bw side RSA1--> BI content. use grouping options after and before.
drag application component into right side pane. that may pulls all data flows.
Using data source name also you can find related cube/reports/dso by using above information at bw side.
Thanks

Similar Messages

  • Business content not found for  CRM5.0 Datasources

    Hello,
    I cannot find the business content for the following datasources of CRM 5.0.
    We are on BW 3.5 version and i am unable to find the business content for the below.Did anyone face this problem and is there any solution or we need to build custom info objects and ODS.
    Master data:
    0CRM_LI_CAT_TEXT
    0CRM_LI_ID_ATTR
    0CRM_LI_ID_TEXT
    NOTE: relevant info objects not found.
    Transaction data:
    0CRM_MLI
    Thanks in advance,
    Rao

    HI
    I have checked in my system also. 0CRM_C08 This InfoCube contains date about the CRM activity items. It is based on the Activity Items ODS object (technical name: 0CRM_ACTI).
    As you mentioned  like that The cube is not based on the another cube(0PH_C01). And it is not available in Metadata Repository also.
    May be you are looking in wrong way. Please check it once again.
    Any furhter questions are there please let me know.
    Thanks & Regards,
    Nagaraju.V

  • Error in Installing Business Content

    Hi All,
    I need to Install SD cube : 0SD_C03 through Business content.  Before doing this, In ECC I have activated the relevant SD datasource : 2LIS_11_VADHR in RSA5 and then activated the same datasource in LBWE also. Then deleted the setup tables in LBWG. Coming to BI , I have replicated the datasource .
    In Business content tab , I have set Grouping Option as Only necessary Objects , and Collection Mode as automatically and selected the Cube : 0SD_C03 through Object Type in Business Content tab. Clicked on INSTALL option . I am getting many errors like :
    Activation of Objects with Type InfoObject
        Checking InfoObject 0MATERIAL
           Attribute 0RT_SEAROLL from characteristic 0MATERIAL not (actively) available
           Hierarchy characteristic 0CM_CDT1 of characteristic 0MATERIAL is not active
    Like this I am getting 0VENDOR,0PLANT , 0CM_CTAR, 0CM_CDT1...infoobjects not actively available. I have tried Installing individual Infoject , still it is failing with same Issues.
    Also I have tried Installing the cube with all the Options in Grouping Objects , Still I am facing the errors.
    Please do the needful
    Regards,
    Mahesh

    Hello, please help post solution to this issue. Im having same exact symptom.
    Attribute 0BPARTNER from characteristic 0CUSTOMER not (actively) available. This is a completely new install.
    best regards,
    alfonso
    |Characteristic 0CUSTOMER: Enter description of navigation attribute 0DBHQDUNS             |    |
    |    |Attribute 0BPARTNER from characteristic 0CUSTOMER not (actively) available                |    |
    |    |Attribute 0DB87SIC1 from characteristic 0CUSTOMER not (actively) available                |    |
    |    |Attribute 0DBAREACOD from characteristic 0CUSTOMER not (actively) available               |    |
    |    |Attribute 0DBCTRYCOD from characteristic 0CUSTOMER not (actively) available               |    |
    |    |Attribute 0DBCTYNAM from characteristic 0CUSTOMER not (actively) available                |    |
    |    |Attribute 0DBCUSTAT from characteristic 0CUSTOMER not (actively) available                |    |
    |    |Attribute 0DBDISTRCOD from characteristic 0CUSTOMER not (actively) available              |    |
    |    |Attribute 0DBEMPBND from characteristic 0CUSTOMER not (actively) available                |    |
    |    |Attribute 0DBGUDUNS from characteristic 0CUSTOMER not (actively) available                |    |
    |    |Attribute 0DBHQDUNS from characteristic 0CUSTOMER not (actively) available                |    |
    |    |Attribute 0DBLGLSTAT from characteristic 0CUSTOMER not (actively) available               |    |
    |    |Attribute 0DBLOCACOD from characteristic 0CUSTOMER not (actively) available               |    |
    |    |Attribute 0DBREGCOD from characteristic 0CUSTOMER not (actively) available                |    |
    |    |Attribute 0DBSALBND from characteristic 0CUSTOMER not (actively) available                |    |
    |    |Attribute 0DBSECTCOD from characteristic 0CUSTOMER not (actively) available               |    |
    |    |Attribute 0DBYRSBND from characteristic 0CUSTOMER not (actively) available                |    |
    |    |Attribute 0DB_MAKTCOD from characteristic 0CUSTOMER not (actively) available              |    |
    |    |Attribute 0DB_MATCDS from characteristic 0CUSTOMER not (actively) available               |    |
    |    |Attribute 0BPARTNER from characteristic 0CUSTOMER not (actively) available                |    |
    |    |Attribute 0DB87SIC1 from characteristic 0CUSTOMER not (actively) available                |    |
    |    |Attribute 0DBANSALES from characteristic 0CUSTOMER not (actively) available               |    |
    |    |Attribute 0DBAREACOD from characteristic 0CUSTOMER not (actively) available               |    |
    |    |Attribute 0DBCTRYCOD from characteristic 0CUSTOMER not (actively) available               |    |
    |    |Attribute 0DBCTYNAM from characteristic 0CUSTOMER not (actively) available                |    |
    |    |Attribute 0DBCUSTAT from characteristic 0CUSTOMER not (actively) available                |    |
    |    |Attribute 0DBDISTRCOD from characteristic 0CUSTOMER not (actively) available              |    |
    |    |Attribute 0DBEMPBND from characteristic 0CUSTOMER not (actively) available                |    |
    |    |Attribute 0DBEMPTOT from characteristic 0CUSTOMER not (actively) available                |    |
    |    |Attribute 0DBGUDUNS from characteristic 0CUSTOMER not (actively) available                |    |
    |    |Attribute 0DBHQDUNS from characteristic 0CUSTOMER not (actively) available                |    |
    |    |Attribute 0DBLGLSTAT from characteristic 0CUSTOMER not (actively) available               |    |
    |    |Attribute 0DBLOCACOD from characteristic 0CUSTOMER not (actively) available               |    |
    |    |Attribute 0DBREGCOD from characteristic 0CUSTOMER not (actively) available                |    |
    |    |Attribute 0DBSALBND from characteristic 0CUSTOMER not (actively) available                |    |
    |    |Attribute 0DBSECTCOD from characteristic 0CUSTOMER not (actively) available               |    |
    |    |Attribute 0DBYRSBND from characteristic 0CUSTOMER not (actively) available                |    |
    |    |Attribute 0DBYRSTD from characteristic 0CUSTOMER not (actively) available                 |    |
    |    |Attribute 0DB_MAKTCOD from characteristic 0CUSTOMER not (actively) available              |    |
    |    |Attribute 0DB_MATCDS from characteristic 0CUSTOMER not (actively) available               |    |
    |    |Attribute 0DBTRDSTYL from characteristic 0CUSTOMER not (actively) available               |    |
    |    |Attribute 0DBADDRES1 from characteristic 0CUSTOMER not (actively) available               |    |
    |    |Attribute 0DBADDRES2 from characteristic 0CUSTOMER not (actively) available               |    |
    |    |Attribute 0DBCTRYNA from characteristic 0CUSTOMER not (actively) available                |    |
    |    |Attribute 0DBSTPRCOD from characteristic 0CUSTOMER not (actively) available               |    |
    |    |Attribute 0DBPOSTCOD from characteristic 0CUSTOMER not (actively) available               |    |
    |    |Attribute 0DBNATID from characteristic 0CUSTOMER not (actively) available                 |    |
    |    |Attribute 0DBNATIDCO from characteristic 0CUSTOMER not (actively) available               |    |
    |    |Attribute 0DBTELPHON from characteristic 0CUSTOMER not (actively) available               |    |
    |    |Attribute 0DBCEONAME from characteristic 0CUSTOMER not (actively) available               |    |
    |    |Attribute 0DBLNOFBUS from characteristic 0CUSTOMER not (actively) available               |    |
    |    |Attribute 0DBANSLUS from characteristic 0CUSTOMER not (actively) available                |    |
    |    |Attribute 0DBCURNCCO from characteristic 0CUSTOMER not (actively) available               |    |
    |    |Attribute 0DBEMPHERE from characteristic 0CUSTOMER not (actively) available               |    |
    |    |Attribute 0DBSUBCODE from characteristic 0CUSTOMER not (actively) available               |    |
    |    |Attribute 0DBHQNAME from characteristic 0CUSTOMER not (actively) available                |    |
    |    |Attribute 0DBHQCTYNM from characteristic 0CUSTOMER not (actively) available               |    |
    |    |Attribute 0DBHQSTPR from characteristic 0CUSTOMER not (actively) available                |    |
    |    |Attribute 0DBHQCTRYN from characteristic 0CUSTOMER not (actively) available               |    |
    |    |Attribute 0DBULDUNS from characteristic 0CUSTOMER not (actively) available                |    |
    |    |Attribute 0DBULNAME from characteristic 0CUSTOMER not (actively) available                |    |
    |    |Attribute 0DBULCTYNM from characteristic 0CUSTOMER not (actively) available               |    |
    |    |Attribute 0DBGUCTRYN from characteristic 0CUSTOMER not (actively) available               |    |
    |    |Attribute 0DBGUCTRYC from characteristic 0CUSTOMER not (actively) available               |    |
    |    |Attribute 0DBGUNAME from characteristic 0CUSTOMER not (actively) available                |    |
    |    |Attribute 0DBNUMFAM from characteristic 0CUSTOMER not (actively) available                |    |
    |    |Attribute 0DBHIERCO from characteristic 0CUSTOMER not (actively) available                |    |
    |    |Attribute 0DBFAMUPDT from characteristic 0CUSTOMER not (actively) available               |    |
    |    |Attribute 0DBBUSNAME from characteristic 0CUSTOMER not (actively) available               |    |
    |    |Attribute 0DB_MATCH from characteristic 0CUSTOMER not (actively) available                |    |
    |    |Checking InfoObject 0DBDUNS_NUM                                              

  • Business Content Installation Errors

    Hi All,
    I need to Install SD cube : 0SD_C03 through Business content. Before doing this, In ECC I have activated the relevant SD datasource : 2LIS_11_VADHR in RSA5 and then activated the same datasource in LBWE also. Then deleted the setup tables in LBWG. Coming to BI , I have replicated the datasource .
    In Business content tab , I have set Grouping Option as Only necessary Objects , and Collection Mode as automatically and selected the Cube : 0SD_C03 through Object Type in Business Content tab. Clicked on INSTALL option . I am getting many errors like :
    Activation of Objects with Type InfoObject
    Checking InfoObject 0MATERIAL
    Attribute 0RT_SEAROLL from characteristic 0MATERIAL not (actively) available
    Hierarchy characteristic 0CM_CDT1 of characteristic 0MATERIAL is not active
    Like this I am getting 0VENDOR,0PLANT , 0CM_CTAR, 0CM_CDT1...infoobjects not actively available. I have tried Installing individual Infoject , still it is failing with same Issues.
    Also I have tried Installing the cube with all the Options in Grouping Objects , Still I am facing the errors.
    Please do the needful
    Regards,
    Mahesh

    Hi Ravikanth,
    I ahve taken all the InfoObjects which were failling and tried Installing with Grouping Option as : Only Necessary Objects . Still I got the same errors .
    My System Version is :
    Software Component : SAP_BW
    Release : 702
    Level : 0009
    Highest Support : SAPKW70209
    Please do the needful.
    Regards,
    Mahesh

  • Install Business content Infosource 2LIS_11_VAHDR on BI

    Hello,
    When i try to Install the Business content Infosource 2LIS_11_VAHDR grouping function I am selecting "In Dataflow Bfr and Aft"
    In the left side under Infosource I selected 2LIS_11_VAHDR then the system is connecting to source system then I have to enter my user name and password then system asking you want to check you have full authorization I selected Yes.
    after few seconds i got runtime error message:
    Runtime Errors         ASSIGN_LENGTH_0
    Date and Time          07/18/2008 22:36:54
    Short dump has not been completely stored (too big)
    Short text
    Program error: ASSIGN with length 0 in program "SAPLSNR3".
    What happened?
    Error in the ABAP Application Program
    The current ABAP program "SAPLSNR3" had to be terminated because it has
    come across a statement that unfortunately cannot be executed.
    Tried to create a field with length 0. This is not
    possible.
    Error analysis
    In an ASSIGN statement in the program "SAPLSNR3" a field symbol with
    length 0 should have been created. However, this is not possible.
    length 0.
    This is not possible.
    Trigger Location of Runtime Error
    Program                                 SAPLSNR3
    Include                                 LSNR3F01
    Row                                     178
    Module type                             (FORM)
    Module Name                             LOCAL_BUFFER
    Source Code Extract
    Line
    SourceCde
    148
    ID 'NONRSWAP' FIELD TNRO-NONRSWAP.
    149
    IF SY-SUBRC < 4.
    150
          Es wurden entsprechend viele Nummern gezogen
    151
          Returncode berechnen
    152
    CASE SY-SUBRC.
    153
    WHEN 0.
    154
               alles ok
    155
    P_RETURNCODE = SPACE.
    156
    WHEN 1.
    157
               Nummern sind im kritischen Bereich
    158
    P_RETURNCODE = '1'.
    159
    WHEN 2.
    160
               Das war die letzte Nummer
    161
    P_RETURNCODE = '2'.
    162
    IF NOT TNRO-NONRSWAP IS INITIAL.
    163
    MESSAGE E028 WITH BNRIV-FROMNUMBER BNRIV-TONUMBER
    164
    P_OBJECT RAISING INTERVAL_OVERFLOW.
    165
    ENDIF.
    166
    WHEN 3.
    167
               Es werden mehr Nr. verlangt, als noch vorhanden sind
    168
    P_RETURNCODE = '3'.
    169
    IF NOT TNRO-NONRSWAP IS INITIAL.
    170
    MESSAGE E028 WITH BNRIV-FROMNUMBER BNRIV-TONUMBER
    171
    P_OBJECT RAISING INTERVAL_OVERFLOW.
    172
    ENDIF.
    173
    ENDCASE.
    174
    175
          Nummernstand dem Aufrufer zurückgeben
    176
    G_NR_LENGTH = STRLEN( BNRIV-FROMNUMBER ).
    177
    G_OFFSET    = 20 - G_NR_LENGTH.
    >>>>>
    ASSIGN BNRIV-NRLEVEL+G_OFFSET(G_NR_LENGTH) TO <G_F>.
    179
    P_NUMBER = <G_F>.
    180
          Funktionsbaustein kann beendet werden
    181
    P_EXIT = YES.
    182
    EXIT.
    183
    184
    ELSEIF SY-SUBRC = 4.
    185
          Das Intervall wurde nicht gefunden
    186
    MESSAGE E751 RAISING INTERVAL_NOT_FOUND WITH P_OBJECT P_SUBOBJECT
    187
    P_NR_RANGE_NR TNRO-CODE.
    188
    ELSEIF SY-SUBRC = 19.
    189
          Der Nummernkreis ist nicht intern
    190
    MESSAGE E752 RAISING NUMBER_RANGE_NOT_INTERN.
    191
    ELSEIF SY-SUBRC = 15.
    192
          Overflow
    193
    IF NOT TNRO-NONRSWAP IS INITIAL.
    194
    MESSAGE E028 WITH BNRIV-FROMNUMBER BNRIV-TONUMBER
    195
    P_OBJECT RAISING INTERVAL_OVERFLOW.
    196
    ENDIF.
    197
    ELSEIF SY-SUBRC = 11.
    Why I am getting this error message
    Thanks

    Roshan, Try the following steps again
    1) Activate the Datasource in LBWE on ECC.
    2) Replicate the Datasources.
    3) Find the datasource and try to edit it. If the infosource is not installed it will try to install again.

  • How to install Business Content of SAP BW

    Hi BW guru's
    Can anyone tell how to install business content in bw.
    we have installed central instance , data base instance and bw component then stuck up can any one help where and how to install Business content
    Thanks in advance
    Regards
    Srini--

    Hi Srinivas,
    To install and activate the business content, you can do that using RSA1 and then going to the business content tab. select the required objects and drag and drop them to the right side window. Then click on the Activate and install button to install the business content.
    You can make use of the grouping option available, to install the required objects together.
    Hope this helps...let me know if you need any further info on this.
    Best Regards,
    Nene.
    <i>Dont forget to assign the points if the answer is helpfull.</i>

  • Missing Update Rules for 0IC_C03 in Business Content

    We had a problem with 0IC_C03,  so we decided to reload from Business Content and then migrate to 7.0 format again.
    However, when we try to gather all of the dependent objects for the InfoCube in Business Content, we only get one set of obsolete update rules (2LIS_40_S278), and the update rules for 2LIS_03_BX, 2LIS_03_BF, 2LIS_03_UM do not show up.  They do not appear under update rules, either.
    I know they were there at one point because I activated and migrated the cube once already.
    Can someone help us find our lost update rules?

    Hi Dan,
    There are no update rules deliverd with BI 7.0 for 0IC_C03. There are only
    transformations Delivered as part of the content. In the new release
    Transformation replace the update rules and the transfer rules.                                                                               
    You have the 3 data sources and the associated transformations to  
    upload data to the infoCube.                                                                               
    Transformations installed                                          
    TRCS 2LIS_03_BF_TR -> CUBE 0IC_C03                                 
    TRCS 2LIS_03_BX_TR -> CUBE 0IC_C03                                 
    TRCS 2LIS_03_UM_TR -> CUBE 0IC_C03                                                                               
    DataSources installed                                             
    2LIS_03_BF                                                        
    2LIS_03_UM                                                        
    2LIS_03_BX

  • Usage of MDM's material master relevant XI Content and Business Content

    Dear all,
    In MDM's material-relevant XI content, there's a message interface "MDMMatmasIn". But in the demo system this interface is not used to write material master data to file. The IDoc type MATMAS.MATMAS05 is used instead. No mapping is used. May I ask why?
    I tried the 00_MATMAS05_R3.map file and can import file in the format of MATMAS.MATMAS05. But some value mappings are not done and have to be added manually. Do I miss precedent steps?
    In MDM Business content, there're lots of import map files like 00_MATMAS05_R3.map and 03b_Units_SAP_R3.map. During the data consolidation procedure, should we just use one map to import the IDoc-XML file? Shouldn't we first use other map file to fill the lookup tables? If not, what are those map files used for? Is there any document about the usage of those map files?
    Very sorry for asking so many questions. I'm very new in this area and desperately need help...
    Best Regards
    Jerome

    Hi Christiane,
    Thanks for the document. But I didn't find how  to import the customization data into the lookup tables. For example, in the MDM standard business content, the "Material" repository contains a lookup table "Material Type". It doesn't contain the values like "ROH" and "HAWA". How can we fill such tables?
    And the standard map "00_MATMAS05_R3" doesn't automatically add such values into lookup table by value mapping. When I tried to import a material master, I had to manually modify this map. Is there any solution to this problem?
    Best Regards
    Jerome

  • How to deliver/bundle/package your own business content

    Hi all,
    I´m resubmitting this question that hadn´t response more than 1 year ago:
    Hi there,
    We have developed some custom BI content for an external system (incl. custom extractors, ODS objects, cubes and queries). Is it possible to package this solution somehow so that it is bundled with SAP BI Content as part of it? What are the steps. Is there any other solutions of packing this product?
    thanks
    Thanks a lot.

    Hi,
    I do not see how your custom developments can be packaged with SAP's Business Content.
    However you should be able to take the .CO and .DAT files of your transports and import them in a new system chain and utilize it.  I have done this on the R/3 side but not on the BW side.  This would need to be experimented with on the BW side to check what needs to be tweaked to make it work.
    BR/
    Mathew.

  • How to identify the best match Business Content CUBEs

    Hi Experts
    I got the reporting requirments from the user...
    How can i identify is there any suitable business content bw objects (Data Source,DSO,Cube..etc) avaliable that i can use to meet the requirment or
    alteast find a nearst match so that i can enhance
    Please advise me how to start
    Thanks

    Hi,
    Once you collected requirements then you can take a look at the business content site for the datasources or cubes etc.which fit with your requirements.If you tell your requirements then we can suggest you what to use or you can start taking a look at  the link below.
    http://help.sap.com/saphelp_nw70/helpdata/en/3d/5fb13cd0500255e10000000a114084/frameset.htm
    Regards.

  • Hi........What is business content..

    Hi all,
    what is business content ? when this comes into picture in real time....
    Thanks & Regards,
    Bhaskar Rao Javvaji

    Hi..
    Business Content is a pre-configured set of role and task-relevant information models based on consistent metadata in the SAP Business Information Warehouse.
    Business Content provides selected roles within a company with the information they need to carry out their tasks.
    Business Content can
    be used in particular industries without being modified
    be modified, meaning you can work with it to any degree of detail
    serve as a template or an example for customer-defined Business Content
    This information model includes integral Roles, Workbooks, Queries, InfoSources, InfoCubes, ODS objects, key figures, characteristics, Update rules, and extractors for SAP R/3, mySAP.com Business Applications, and for other selection applications.
    To summarize,
    Business Content enables a quick and cost-effective implementation.
    Provides a model that can be used as a guideline during implementation using experience gained from other implementations
    SAP delivers Business Content in the SAP Delivery Version (D version).
    Changes are saved in the M version.
    Active Business Content is saved in the A version.
    In the Administrator Workbench, one can collect and transfer the Business Content delivered by SAP. In this way, all additional necessary objects are taken into account automatically, as is the sequence for the activation.
    SAP delivers the Business Content objects in a new D Version. The customer can compare the new Business Content with his/her active customer version, and either adopt the new version or merge it with his/her version.
    Adopt: The customer version is deleted and replaced by the new Business Content version.
    Merge: The “total” is made from both objects and saved as a new customer version.
    The Match indicator is set as default in order to prevent the customer version being unintentionally overwritten.
    If the Content of the SAP delivery version is to be matched to the active version, you have to set the Install indicator separately.
    The active version is overwritten with the delivery version if the match indicator is not set and the install indicator is set. In other words, the delivery version is copied to the active version.
    If the Install indicator is not set, the object is not copied or matched. In this case, the Match indicator has no effect.

  • Loading Business Content cubes

    Hi
    I am new to BW area, and am posting a basic question, Once the Cube is activated from Business content what are the steps to Load data into the infocube and how to identify the right info sources for that cube, can any one please explain?

    daniel,
    the business content from BW already prescribes certain infosources for infocubes (via update rules assigned to them).
    once you have identified which datasources are prescribed by business content activation, you should activate the datasources related to these infosources. replicate the datasources in the source system, then activate the transfer rules in BW. then create an infopackage under the infosources and schedule the extraction.
    you could also go look around in the forums since this has already been discussed in great detail. =)
    hope this helps, and spread the love (by rewarding points). =)
    ryan.

  • Activate Business content - "In dataflow afterwards" or "Only necessary" ?

    Hello experts,
    I would like to activate the business content for 0FI_GL_1 infosource. I am not sure which method to follow. Can you please advice?
    Method 1
    AWB --> Business Content --> From the left most frame Clicked on "Object types"
    In the right most (3rd) frame set the grouping to "In dataflow afterwards"
    In the second frame expanded the "Info sources" and clicked on "Select objects"
    In the popup window, searched for "0FI_GL_1" and clicked on "Transfer Datasource"
    And then choose "Install" from the right most frame
    It activated lot of unnecessary stuff like Infosets, Multi Provider etc
    Method 2
    AWB --> Business Content --> From the left most frame Clicked on "Object types"
    In the right most (3rd) frame set the grouping to "Only necessary objects"
    In the second frame expanded the "Info sources" and clicked on "Select objects"
    In the popup window, searched for "0FI_GL_1" and clicked on "Transfer Datasource"
    And then choose "Install" from the right most frame
    Repeat the above steps for the all (Infocube, ODS, update rule, transfer rule)
    Thanks in advance
    Sri

    Hi,
    Installing the BC is depends upon your requirement.Please see the folowing information regarding BC installment.
    <b>In Data Flow Before</b>
    If your start point is an InfoCube, all those objects that are in the data flow before the InfoCube, and are therefore necessary for providing data to the InfoCube, are collected. This includes, for example, update rules and InfoSources.  So that these objects can be activated, all the corresponding objects required for these objects have to be collected in addition. For activating an InfoSource, InfoObjects may also be necessary which are not contained in the InfoCube and have therefore not yet been collected. However, for these additional objects, the objects that come before them in the data flow are not collected.
    <b>In Data Flow Afterwards</b>
    For example, if your start point is an InfoCube, all those objects that are in the data flow after the InfoCube, and are therefore reporting objects that serve to display the data stored in the InfoCube, are collected. This includes, for example, queries and Web templates. So that these objects can be activated, all the corresponding objects required for these objects have to be collected in addition. For activating a role, additional workbooks that are based on other InfoCubes may also be necessary. However, for these additional objects, the objects that come after them in the data flow are not collected. These additional workbooks cannot be used for reporting unless they are transferred from the Business Content by some other means.
    <b>
    In Data Flow Before and Afterwards</b>
    For example, when using an InfoCube, the objects necessary for activating the InfoCube are collected together with other objects that are required for activating those objects collected as well. This includes objects positioned both before and after the InfoCube in the data flow. 
    With the InfoCube, all incoming data streams and the evaluation string are activated. Both are then completed with data streams, enabling a complete evaluation in the workbooks.
    <b>Collection Mode</b>
    Collect Automatically (default setting): The data is collected directly when the objects are selected.
    Start Manual Collection: The data is collected only when you click on the  Gather Dependent Objects icon.
    Set the collection mode to Start Manual Collection. You can then select all objects without having to wait.
    Thanks
    Reddy
    Message was edited by: Reddy

  • Business content installation query

    Hi Experts ,
    i am installing PM Business content installation , while installing 0PM_C03 there is an infoobject 0EQUIPMENT which is existing in present system but of old version   and mst of the attributes are time independent
    now  i  want to install   business content in such away that current 0EQUIPMENT  should not be disturbed  and business content version has attributes that are time dependant
    Question is shall i install 0EQUIPMENT  or not,  and let the old version remain , as 0EQUIPMENT  is under use at few places
    secondly if i dont install in future will there be any problem in loading PM data .
    Please Advise,
    Thanks in Advance,
    Nitya

    HI,
    hi,
    use the option Match (X) or copy.
    The Match indicator is set as default in order to prevent the customer version being unintentionally overwritten. If the Content of the SAP delivery version is to be matched to the active version, you have to set the Install indicator separately.
    The active version is overwritten with the delivery version if:
    ¡        The match indicator is not set, and
    ¡        The install indicator is set.
    In other words, the delivery version is copied to the active version.
    Note
    If the Install indicator is not set, the object is not copied or matched. In this case, the Match indicator has no effect.
    For more info search in forums or check the sap help.
    http://help.sap.com/saphelp_nw2004s/helpdata/en/80/1a66d5e07211d2acb80000e829fbfe/frameset.htm
    Regards
    KP

  • Business Content Objects on BI side for the business content data sources

    Hi All,
    We are doing a fresh implementation, and would like to know the step by step way through which i can know the relevant business content objects on BW side for a BC data sources ,,,,,
    0material_attr
    and 0mat_sales_Attrt
    As Per my understanding, once installed the BC data sources, the data would be feed to the master data info object 0material
    But the question is how do i know the complete Business content object on BW / BI side, and use the same building the entire flow.
    I have a hint that we can know it through the help.sap.com, and it would be highly appreciated and awarded for your expertises guidence, i have tried sercing in it, but dont know the correct trick.
    Even for the other  business content data sources.
    Example, the relevant infoobject or the DSO or the Cube,transformation, dtp,etc..
    Thanks
    Daljeet sing Nagi

    Hi Vineeth,
    Do you mean this way in the meta data repository, it will propose the flow for the business content object, and if yes, then even if they are in delivery version and not in active version, still it shall propose the flow for the business content objects,
    And to cut short my requirement,  as specified we are doing the fresh implementation,
    and i have identified that we would require first to load the material master data, and based on our present requirement, the data source which i have identified are
    0material_attr   (for the table mara in ECC system)
    0mat_sales_attr (for the table mvke in ECC system)
    all the fields data would be loaded to which master data info object,
    will it be 0material or ????
    Thanks for your support and surly as promised

Maybe you are looking for