Need calrification " am not getting error or success message anywhere "
Dear All,
PI PIcks and Arcives the file successfully but i cant find any error or success message in channel monitiring , Moni or Message Monitoring since i am aware that i am passing XML file and doing FCC in sender channel.
Pls Explain me why PI Picked up and Archived the file since file format was wrong and It doesnt show any error in channel monitoring or Moni or Message Monitoring
and also pls explain me as i understand PI picks the file and Archive it then PI process the file from archive :pls correct me if am wrong
Regards,
Manikandan
>> since i am aware that i am passing XML file and doing FCC in sender channel.
I believe you are converting flat format file to XML using FCC. Dont understand passing xml file and doing fcc in sender channel?
Check the following..
1) See the file you place in the sender side has file permission to execute
2) Are you referencing the right file in the file sender communication channel?
3) Make sure that your fcc sender file throws error by simulating simple error such as giving field names invalid in the fcc. Then we can figure it out whether fcc referencing the appropriate file or some other file.
Hope this helps. I would like to get elaborate explanation about your problem.
Similar Messages
-
i need some help. im getting error -69 when trying to sync my ipod. i dont kno what to do. ive tried googling as much info as i can on this subject but i cant seem to find a answer to get me off to a good starting point. i back all my music up on a external hard drive.
If the file was not originally from iTunes, you'll need to redownload it from it's original source or rerip it from the CD. Files can sometimes go bad and become corrupted. As to how or why that happens, there are a number of ways.
What format are the problematic tracks in? Have you tried converting them to another format in iTunes?
iTunes: How to convert a song to a different file format
B-rock -
Even though I get a installed successful message it is not in applications folder. Where is it?
Hi 88Gears,
Try typing 'Captivate' in spotlight and see if it shows the application else you need to reinstall the software.
Regards,
Rave -
Blank registration screen on CS3... do not get error window saying "Never Register"
I cannot remedy the CS3 blank-screen problem on my Mac (Safari OS) with the suggested fix, as I don't get an error window saying "Never Register" after disconnecting internet and re-launching CS3. Any other ideas?
Hi Curt, I get the normal CS3 desktop (although nothing works) and the blank registration screen. I do not get an error message or any other prompt telling me I can select "Never Register," even after disconnecting from the internet and relaunching CS3. The only way I can get out of the "freeze" is to "Force Quit: CS3. In other words, the suggested fix is not working for me. Thanks Curt.
Michael
Date: Fri, 22 Nov 2013 09:16:08 -0800
From: [email protected]
To: [email protected]
Subject: Blank registration screen on CS3... do not get error window saying "Never Register"
Re: Blank registration screen on CS3... do not get error window saying "Never Register"
created by Curt Y in Photoshop General Discussion - View the full discussion
When you boot up CS3 what do you get?
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5865985#5865985
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5865985#5865985
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5865985#5865985. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Photoshop General Discussion at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0. -
While creating the credit note getting error
hi
while creating the credit note getting error
MsgType Message Msg.no.
E Enter country 216
E Sales document was not changed 219
pls suggest meIs COPA activated? If yes go to teh button PA and give country value in the line item.
Reward if useful
sarma -
I have a speaker with I phone 30 pin dock, it use to work fine but i am not getting error saying accessory not supported,how i can determine what could be the problem
i am getting the same error with my rf transmitter that i use in my car- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Did this start happening after an iOS update? Sometimes an iOS update will break compatibility.
Sometimes this works:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device. -
Error print success message checksum content error: Action procesada.
I have a problem with an application in the HTML DB that I am creating. the problem is:
I create plicacion from each one of the tables, when trying to enter a registry in the application of concept, sends east error to me, but if it stores the registry. the error is:
Error print success message checksum content error: Action procesada./6Ã1Ã9ÃFE08952600ACEC1E0188Ã C/: 4730F16841157B21D061A969F6640A61.
the design I did it with Oracle designer.
the model contains three tables:
1. file .tab the designer
PROMPT Creating Table 'CONSULTOR'
CREATE TABLE CONSULTOR
(ID_CEDULA NUMERIC(12) NOT NULL
PROMPT Creating Table 'CONCEPTO'
CREATE TABLE CONCEPTO
(ID_CONCEPTO NUMERIC(3) NOT NULL
,DESC_CONCEPTO VARCHAR2(120)
,FACTURABLE VARCHAR(5)
PROMPT Creating Table 'GENERAL'
CREATE TABLE GENERAL
(ID_GENERAL NUMERIC(5) NOT NULL
,CONC_ID_CONCEPTO NUMERIC(3) NOT NULL
,CONS_ID_CEDULA NUMERIC(12) NOT NULL
,FECHA_ACT DATE
,DESCRIPCION_ACT VARCHAR2(120)
,CANTIDAD_HORAS NUMERIC(5)
2. file .con the designer
PROMPT Creating Primary Key on 'CONSULTOR'
ALTER TABLE CONSULTOR ADD (CONSTRAINT
CONS_PK PRIMARY KEY
(ID_CEDULA))
PROMPT Creating Primary Key on 'GENERAL'
ALTER TABLE GENERAL ADD (CONSTRAINT
GENE_PK PRIMARY KEY
(ID_GENERAL))
PROMPT Creating Primary Key on 'CONCEPTO'
ALTER TABLE CONCEPTO ADD (CONSTRAINT
CONC_PK PRIMARY KEY
(ID_CONCEPTO))
PROMPT Creating Foreign Key on 'GENERAL'
ALTER TABLE GENERAL ADD (CONSTRAINT
GENE_CONC_FK FOREIGN KEY
(CONC_ID_CONCEPTO) REFERENCES CONCEPTO
(ID_CONCEPTO))
PROMPT Creating Foreign Key on 'GENERAL'
ALTER TABLE GENERAL ADD (CONSTRAINT
GENE_CONS_FK FOREIGN KEY
(CONS_ID_CEDULA) REFERENCES CONSULTOR
(ID_CEDULA))
3 file . lis de designer
Reconcile Report: C:\Documents and Settings\rolando\Mis documentos\aso\xxx.lis
Generated on Tue Jun 07 09:55:25 2005 by Server Generator 9.0.4.3.14
====== ======== ================ ==============
Object Property Repository Value Database Value
====== ======== ================ ==============
Object Property Repository Value Database Value
Table CONCEPTO * NOT IN DATABASE * ***
Object Type
Data Persistence Permanent
Cluster
Index Only No
Cached
Initial Transactions
Max Transactions
Percent Free
Percent Used
Initial Extents
Next Extent
Min Extents
Max Extents
Percent Increase
Freelists
Freelist Groups
Tablespace
Parallel No
Comment
Column ID_CONCEPTO * NOT IN DATABASE * ***
Datatype NUMERIC
Max Length 3
Scale
Mandatory Yes
Default Value
Domain
Comment
Column DESC_CONCEPTO * NOT IN DATABASE * ***
Datatype VARCHAR2
Max Length 120
Scale
Mandatory No
Default Value
Domain
Comment
Column FACTURABLE * NOT IN DATABASE * ***
Datatype VARCHAR
Max Length 5
Scale
Mandatory No
Default Value
Domain
Comment
Primary Key CONC_PK * NOT IN DATABASE * ***
Enabled Yes
Deferred No
Immediate No
Exception Table
Key Column ID_CONCEPTO
Index CONC_PK * NOT IN DATABASE * ***
Unique Yes
Global No
Bitmapped No
Compute Statistics No
Reverse No
Nosort No
Initial Transactions
Max Transactions
Percent Free
Percent Used
Initial Extents
Next Extent
Min Extents
Max Extents
Percent Increase
Freelists
Freelist Groups
Tablespace
Parallel No
Snapshot Log No No
Table CONCEPTO Differences: 1
Object Property Repository Value Database Value
Table CONSULTOR * NOT IN DATABASE * ***
Object Type
Data Persistence Permanent
Cluster
Index Only No
Cached
Initial Transactions
Max Transactions
Percent Free
Percent Used
Initial Extents
Next Extent
Min Extents
Max Extents
Percent Increase
Freelists
Freelist Groups
Tablespace
Parallel No
Comment
Column ID_CEDULA * NOT IN DATABASE * ***
Datatype NUMERIC
Max Length 12
Scale
Mandatory Yes
Default Value
Domain
Comment
Primary Key CONS_PK * NOT IN DATABASE * ***
Enabled Yes
Deferred No
Immediate No
Exception Table
Key Column ID_CEDULA
Index CONS_PK * NOT IN DATABASE * ***
Unique Yes
Global No
Bitmapped No
Compute Statistics No
Reverse No
Nosort No
Initial Transactions
Max Transactions
Percent Free
Percent Used
Initial Extents
Next Extent
Min Extents
Max Extents
Percent Increase
Freelists
Freelist Groups
Tablespace
Parallel No
Snapshot Log No No
Table CONSULTOR Differences: 1
Object Property Repository Value Database Value
Table GENERAL * NOT IN DATABASE * ***
Object Type
Data Persistence Permanent
Cluster
Index Only No
Cached
Initial Transactions
Max Transactions
Percent Free
Percent Used
Initial Extents
Next Extent
Min Extents
Max Extents
Percent Increase
Freelists
Freelist Groups
Tablespace
Parallel No
Comment
Column ID_GENERAL * NOT IN DATABASE * ***
Datatype NUMERIC
Max Length 5
Scale
Mandatory Yes
Default Value
Domain
Comment
Column CONC_ID_CONCEPTO * NOT IN DATABASE * ***
Datatype NUMERIC
Max Length 3
Scale
Mandatory Yes
Default Value
Domain
Comment
Column CONS_ID_CEDULA * NOT IN DATABASE * ***
Datatype NUMERIC
Max Length 12
Scale
Mandatory Yes
Default Value
Domain
Comment
Column FECHA_ACT * NOT IN DATABASE * ***
Datatype DATE
Max Length
Scale
Mandatory No
Default Value
Domain
Comment
Column DESCRIPCION_ACT * NOT IN DATABASE * ***
Datatype VARCHAR2
Max Length 120
Scale
Mandatory No
Default Value
Domain
Comment
Column CANTIDAD_HORAS * NOT IN DATABASE * ***
Datatype NUMERIC
Max Length 5
Scale
Mandatory No
Default Value
Domain
Comment
Primary Key GENE_PK * NOT IN DATABASE * ***
Enabled Yes
Deferred No
Immediate No
Exception Table
Key Column ID_GENERAL
Index GENE_PK * NOT IN DATABASE * ***
Unique Yes
Global No
Bitmapped No
Compute Statistics No
Reverse No
Nosort No
Initial Transactions
Max Transactions
Percent Free
Percent Used
Initial Extents
Next Extent
Min Extents
Max Extents
Percent Increase
Freelists
Freelist Groups
Tablespace
Parallel No
Foreign Key GENE_CONC_FK * NOT IN DATABASE * ***
Enabled Yes
Deferred No
Immediate No
Cascade Delete RESTRICT
Cascade Update RESTRICT
Exception Table
Join Table CONCEPTO
Key Column CONC_ID_CONCEPTO
Referenced Column CONCEPTO.ID_CONCEPTO
Foreign Key GENE_CONS_FK * NOT IN DATABASE * ***
Enabled Yes
Deferred No
Immediate No
Cascade Delete RESTRICT
Cascade Update RESTRICT
Exception Table
Join Table CONSULTOR
Key Column CONS_ID_CEDULA
Referenced Column CONSULTOR.ID_CEDULA
Snapshot Log No No
Table GENERAL Differences: 1
====================================================================================================================================
Total Differences: 3
====================================================================================================================================Rolando - We don't need all that information about the data model and such. Can you describe what the application does on the page that gives the error? I mean, you submit the page, it performs some after-submit processes (what do they do and how many processes are there?) and then it has some kind of branch to the same page or another page. Describe the processes, show us the success message for each process, exactly as they are formatted in the process definition page, and describe the branches (to the same page, another page, do they use URL redirects? And also please post the entire URL that you see when the error page is displayed.
Finally, please provide all the output from the About HTML DB page: Workspace Home -> Click the About HTML DB link under Workspace Administration on the far right side of the page. Then copy all the output and show it here.
Scott -
Hi all, I am trying to update my ipad OS to 5.1, but was unable, keep getting error in installing message. Please advices. Thx
Try this - Disable your firewall and anitvirus software temporarily. Then download and install the iOS update.
After you install iOS 5.x, the next update can be installed when connecred via wireless.
Cheers, Tom -
I have a new iPhone 6 and I am not getting iMessages, only txt messages. How do I change this to receive iMessages, too? My friends are sending me iMessages that I am not receiving.
If you didn't have imessage on and now do, it sometimes takes a while to get synced up.
-
I do not get mobile notification for messages on ...
I do not get mobile notification for messages on Android device Please Help?
Hi,
Couple of questions:
Are you on the latest Android version?
Did you receive notifications in the past but they then stopped arriving?
Do you receive calling and/or chat notifications only?
Do you share your device with others who log into a different Skype account?
Regards,
Brad
Microsoft Skype Notifications PM
PM/PO Notifications RV
Microsoft Skype Prague -
I have two pictures in expert mode in editor. I go to "Move tool", click on picture but I am unable to move and drop in second picture. I do not get the dashed lines around the picture, and if I move cursor to
move picture, I get the following message " This operation cannot be performed on the locked background layer. Do you want to convert the locked background layer into an editable layer?" I have no idea
what I need to check or uncheck to make it work., I am following a lesson plan in a "Infinite Skills" training course. I talked to them, but was unable to come up with a answer. Help, please I have been
trying to do this move for over a week. tks rdfWe don't know whether this tutorial was written for Photoshop or Photoshop Elements, more specifically for which version of PSE. There are differences. Be sure to have the layers palette open.
Try this instead
Open picture B, the one you wish to select something from to add to another picture.
Use one of the selection tools, e.g. selection brush, lasso tool, to select the object. You will see an outline ("marching ants") once the selection is complete
Go to Edit menu>copy to copy the selection to the clipboard
Open picture A, then go to Edit>paste
Use the move tool to position object from picture B.
In the layers palette you should see picture A as the background layer, and object B on a separate layer.
To unlock the background layer, double click on it in the layers palette. Perhaps your tutorial will guide you through the process. -
Need help installing keep getting error message when i install program
i download the beta version on my android epic phone by sprint and when i go to install the program it shows a screen installing then an error message pops up almost immediately and say that application was not installed how do i fix this i have tried to re-download it and install it again but it gives the same error message every time now i have also allowed outside markets apps to download on my phone and i still get this error message or what do i need to do to get it installed on my phone?
Firefox might not be able to run on your mobile . See [https://wiki.mozilla.org/Mobile/Platforms/Android#System_Requirements System requirements for Android mobile] and [https://wiki.mozilla.org/Mobile/Platforms/Android#Known_Issues Known issues for mobiles]
-
Not getting error or warning massage for duplicate MIRO Credit memo
Hi experts
i have checked standard massage "M8 108 Check if invoice already entered under accounting doc. no."M8108 (if accounting documents are found).i have enter the message M8108 in table T100S using transaction
SM30 and then set it as an error via OMRM.then also not getting any massage or error.
regards
sachin LokhandeDear
In T.Code OMRM select the message number 504 Quantity invoiced greater than goods receipt quantity and keep error in Online field, Batchl and warning in Standard field. So that whenever you do MIRO system verifies that the invoiced quantity is not greater than MIGO quantity. This way posting MIRO twice can be avoided.
Regards -
Can't get firefox sync to work. I keep getting 'Error While Syncing' message
I am on Mac OS X 10.6.4, Snow Leopard on a Mini Mac a year old.
I got a message from X Marks telling me they were shutting down.
As I use my bookmarks every day and have thousands of them all sorted into folders I definitely never want to lose them or lose access to them if my house burns down or my computer is stolen!
I was using Firefox 3.6 and followed X Marks advise and downloaded Firefox Sync...but...won't work....kept giving me the 'Error While Syncing' message after trying to sync for a while. I looked at the blog and tried a few things like resetting password, restarting computer, checking my setting etc., but no deal. So, as the Firefox Sync download page told me that if I was using Firefox 4 beta the feature was built in and I didn't need the download, I then downloaded Firefox 4....which has removed my X Marks option, which was at least viable till after Xmas! and I still have the 'Error While Syncing' message beside the Sync button on my status bar....so now I am completely at a loss. The only thing I can do if I can't fix it up is go back to 3.6 and go on using X Marks while it is still available and pray that you get this sorted out before they dissappear.
I also like to be able to get my updated bookmarks on the other browsers I use, like Chrome and IE, so I would really appreciate it if you would include this cross browser sync capability as soon as you can. I have pledged X Marks that I would even pay for their service to continue as it seems they are so ahead of anyone else in their service and it is a large pain in the you know where that they can't keep going.
Thanks. and I hope you can help. From the blogs it seems that I am not the only one having this problem of getting the Firefox Sync working@globaltruth
Thank you for your suggestion. I tried it. Unfortunately, the error message still sits on my statusbar, right after the Firefox Sync image. -
Synchronous scenario(ABAP proxy to HTTP_AAE) getting error exception as "Message Expired Exception"
Dear All,
I have done all the configuration for ABAP proxy scenario using AAE/ICO as per the below "how to guide" using SOAP as sender adapter using xi protocol. My SAP PI is 7.4 dual stack system. here third party is not a webservice its HTTP based we server so no wsdl.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/70066f78-7794-2c10-2e8c-cb967cef407b?overridelayout=t…
However after running the scenario from ECC I am getting the exception as "Returning to application. Exception: com.sap.engine.interfaces.messaging.api.exception.MessageExpiredException: Message 53289257-97e0-06d0-e100-00000a70d384(OUTBOUND) expired.". I do not have any connection problem to third party(bank) URL. moreover I am able to get the response from bank using classical scenario s in PI, but the response message is not getting pushed to ECC, rather its reaming in PI SXMB_MONI with status "Log version".
Thats the reason I am trying to do using ICO, but using ICO PI is not even sending the request out of PI to bank. Please see the below receiver communication channel message log.
Thanks,
FarhanHi,
As per the log, the message has started 23:18:02 and failed at 23.23:02 it took 5min time, if message is not process certain time this kind of errors comes up. Have you changed adapter type for existing SOAP communication channel or created new? provide complete log of the message from starting time to ending time if possible.
Maybe you are looking for
-
Unable to load catalog in CRS application. Indexing is failed
Unable to load catalog in CRS application, Indexation failed: Below is the error msg **** Error /atg/dynamo/service/jdbc/JTDataSource Unable to connect to data source because of SQLException: Unexpected exception while enlisting XAConnection java.sql
-
Error of Creating Data Server for XML
Hi all, When I want to create a new data server for XML in ODI, the error occur. error information: connection failed java.sql.SQLException: Unexpected token: EMP_TABLE in statement [create EMP_TABLE] My JDBC url is: jdbc:snps:xml?f=../demo/xml/MOP/M
-
System seems to have done it since beginning (actually first time the day that I moved to Mountain Lion) but it is now every other day. This defeats the purpose of having a back up. I did see more comments on this but no silutions. No red i displayed
-
Knowing issues with atv3 and Yosemite gm incl iTunes 12 beta
so as I wiite in the headline I have som problems to connect my media library With iTunes a tv always says:unable to connect to your media library it is also impossible to connect to the library from any other device (iPad or iPhone) i checkt it wi
-
Hello I have just been given a new hd box by sky to replace the old sky+ box. In the instructions is says i can connect via hdmi cable if i have an hd ready tv, or skart lead if not. (It is not hd ready) However my old sky box connected with an aeria