Need case suggestions to protect the 8220

I just got an 8220 from tmobile and they sold me a leather case for $19.99.. It made sense to me to buy the case as I can drop my phone once in a while and the bulkiness of the leather seems to be a good shock absorber.. What I HATE, is how my screen shows over 80% bubbles because the plastic doesn't adhere to the glass screen.. Any specific ideas that will eliminate the bubbles on the screen , yet still offer great shock protection if I drop the phone on a hard surface floor??  thanks

I went to my mall and looked at one of the kiosks and got a runnber one, it wraps around the sides and back and leaves the front exposed. I absolutely love it!

Similar Messages

  • WE NEED NEW LAWS TO PROTECT THE PUPLIC FROM THE BT...

    We the public need new laws to protect us from BT GREED. your spreading yourself very thin, but you expect us to still pay for 8.0mb when your only giving us 0.6 and to you its acceptable!!!!!!
    its nothing more than a scam and would be classed at a scam if joe puplic tried to run a business that way but big companies like BT are a law unto themselves. no one has the balls to do anything.
    SLOW SLOW BT CONGESTED EXCHANGE THAT I SEEM STUCK WITH HOWEVER AT PEEK TIMES WHEN I HIT A VERY SLOW 1MB ON MY BT LAND LINE THAT COST ME AN ARM AND A LEG I CAN JUST DISCONNECT FROM IT AND CONNECT TO NEXT DOORS VIRGIN MEDIA UNSECURED D-LINK ROUTER AND GET A 2.6 CONNECTION. HOW ???????????????????? AND WHY????????????????? IF ITS CONGESTED HOW IS THAT EVEN POSSIBLE OR DO VIRGIN PAY BT A **bleep** LOAD OF MONEY.

    Hi,
    A mailbox user can have only one managed folder mailbox policy applied. I recommend you remove the managed folder mailbox policy from this mailbox user and then apply a new managed folder mailbox policy to this user.
    To remove the managed folder mailbox policy from the mailbox user run the following PowerShell command:
    Set-Mailbox -Identity test -ManagedFolderMailboxPolicy $null
    Best regards,
    Belinda
    Belinda Ma
    TechNet Community Support

  • Need a Suggestion For implementing the Digital Signature For the Documents

    Hi,
    Currently I am working in a Document Management System. I need a Good Suggestion for how to implement a Digital Signature For the Documents.
    Thanks in Advance
    Sabarish V

    Hmm, if you are not using Oracle Payroll, what are you using for payroll? I am wondering why you could not use your payroll system, whatever it is, to handle this reimbursement program.
    Well, you may want to talk to Oracle support about how to handle this in Oracle iExpense. You can certainly handle advances for Expense Reports. You would then apply the advance to the expense report items. The catch is I don't think you can stop expense item entry after the adavance is satisfied. You would have to set up a work flow process of some kind to have the expense reports reviewed and only approve expenses that are applied to the advance, is what I am thinking. Not your ideal solution, but something to think about. It could be the Oracle folks might know of a sneaky way to handle this. What you are trying to do is unusual. Employee advances are common, but the idea of not being able to exceed the advance amount is what unusual about this. Normally you will accept any expenses over the advance amount and reimburse the employee for those extra amounts not advanced.
    Good luck.
    John Dickey

  • IPhone 4 cases:  How much protection do you think it needs?

    Got my iPhone 4. Luckily, it works perfectly so far.
    But I do think the phone looks much more fragile and breakable than my old 3G.
    Now, I don't mind a thin, attractive case because I'm slightly clutzy and it's gonna drop out of my pocket a few times, this I know.
    So I bought a case from a mall vendor that's no name but seems well made -- thin silicone that covers the back and the sides. $15. Do I need to do better?
    My question(s) to everyone are... how thick and sturdy do you think we need to go to protect the iphone 4 from a drop? And what is the best case material for withstanding a fall? Is there something you've found that is not too bulky and industrial looking -- or does it need to be thick and padded to be truly protective?
    And can I avoid spending $30 on a case (or that Apple bumper thing) and feel like my phone is protected?
    I know nothing about this stuff so would love some opinions. Thanks!

    dagdagdag123 wrote:
    Got my iPhone 4. Luckily, it works perfectly so far.
    But I do think the phone looks much more fragile and breakable than my old 3G.
    Now, I don't mind a thin, attractive case because I'm slightly clutzy and it's gonna drop out of my pocket a few times, this I know.
    So I bought a case from a mall vendor that's no name but seems well made -- thin silicone that covers the back and the sides. $15. Do I need to do better?
    My question(s) to everyone are... how thick and sturdy do you think we need to go to protect the iphone 4 from a drop? And what is the best case material for withstanding a fall? Is there something you've found that is not too bulky and industrial looking -- or does it need to be thick and padded to be truly protective?
    And can I avoid spending $30 on a case (or that Apple bumper thing) and feel like my phone is protected?
    I know nothing about this stuff so would love some opinions. Thanks!
    I went for this one, the black and blue:
    http://ifrogz.com/

  • What is the case that comes with the iPod?

    I'm planning on getting a 30GB iPod but, this stupid company won't say what is in the box. I know it comes with a case. I was wondering if anyone had a picture of the case or could at least give me a brief description. If anyone could, I would greatly appreciate it.
    All I know is, that this company really could care less about it's customers. I can't even contact them about this.
    Thanks Again
    hp pavilion a808x   Windows XP  

    the 5th gen iPod comes with a small faux leather envelope-like case, light grey in color, that has a soft cotton-like interior. it has an opening in the top and is just large enough to hold the ipod. reminds me of one of those tiny wallets that will only hold a credit card. you slide the ipod in the top. while the ipod is in its case you cannot access the click-wheel, screen etc. basically you can't see the ipod.
    if you're looking for a case that will protect the ipod while allowing you to use the interface, you will need to buy anouther one.

  • Need a suggestion for  change in cv02n tcode

    Hi all,
    Need a suggestion to update the additional tab / classification in cv02n transaction.
    I want to update the charecterstics(custom) in the additional tab(and also in classification tab).
    Thanks & regards
    Pavan

    Hi all,
    Found solution

  • I'm trying to find an external drive for the MacPro that will allow me to password protect the external drive in case it is taken.  Any suggestions on a very reliable on that is 2TB or a third party software that is compatable with the need I describe?

    I'm trying to find an external drive for the MacPro that will allow me to password protect the external drive in case it is taken.  Any suggestions on a very reliable one that is 2TB or a third party software that is compatable with the need I describe?

    How much of a hurry are you in, and are you considering upgrading to Lion?
    File Vault on Snow Leopard only encrypts home folders you select, and doesn't work well with Time Machine.
    But Lion will have "full disk encryption" of local or external disks.  See File Vault 2 here: http://www.apple.com/macosx/whats-new/features.html

  • My laptop was stolen and I need to be able to connect my iPhone4 to the new laptop and transfer content (photos, mp3's, apps etc.) to the new laptop.  I'm afraid to try a sync in case it deletes all the content off the iPhone.  Any suggestions?

    My laptop was stolen and I need to be able to connect my iPhone4 to the new laptop and transfer content (photos, mp3's, apps etc.) to the new laptop.  I'm afraid to try a sync in case it deletes all the content off the iPhone.  Any suggestions?

    You should be importing all pics taken with the iphone to your computer regularly as you would with any digital camera.
    iOS: Importing personal photos and videos from iOS devices to your computer

  • Need help to find protective case for iPhone 3G

    I am looking for a protective case (preferably black one) for my new iPhone 3G that can protect the screen from scratches (without bubbles and fairly easy to install), protects the remainder from scratches, and allows access to all its buttons.
    The Apple store seems to be out of many of them and it is difficult to tell on the online Apple store which one is actually going to work.
    Does anyone have any suggestions?

    A friend of mine has an otterbox for his Touch. It it bullet-proof. They have one for the 1st gen iPhone, but not yet for the 3G. It should be out any second now. It is very high quality. I am waiting for that. I need something that I can strap to my arm or Camelbak strap and survive if I crash or it rains. That will. There are reviews on amazon. (cheaper on amazon than their own site)

  • Is there any way to block the shutdown of the device is protected by password? This function would help in case of theft with the issue of the find my iphone app.

    is there any way to block the shutdown of the device is protected by password? This function would help in case of theft with the issue of the find my iphone app.

    Device experiences issues, locks up.
    I need to do a reset.
    How would I do that with a pass code lock in place?
    Wait until the battery dies?
    Apple's changes in iOS 7 are smarter.
    "Losing your iOS device feels lousy. Thankfully, Find My iPhone can help you get it back. But if it looks like that’s not going to happen, new security features in iOS 7 make it harder for anyone who’s not you to use or sell your device. Now turning off Find My iPhone or erasing your device requires your Apple ID and password. Find My iPhone can also continue to display a custom message, even after your device is erased. And your Apple ID and password are required before anyone can reactivate it. Which means your device is still your device. No matter where it is."
    http://www.apple.com/ios/whats-new/

  • Xtrmly urgent : In Case of PO change, the whole IDoc needs to be sent

    Hi All,
       I'm sending PO change IDoc using Message Control ( Process code ME11, function-module IDOC_OUTPUT_ORDCHG, message type ORDCHG).
      In case of mutiple line items PO, if i'm changing a few line items ( but not all ), PO Change IDoc is sent with only those items which are changed.
      But I need to send IDoc with the whole PO with all line items, even if there is change in a single line item.
    Pls suggest me. It's xtrmly urgent. Thnkx in advance,
    Rudresh
    Mumbai

    No..I'm not using change pointers concept. I did modification in partner profile and now I'm not using ME11 for sending PO change IDoc. Instead , I'm using ME10 only with 'Change Des' checkbox ticked.
      This has solved my problem to a great extent. But if I delete, a line item in case of Multiple line item PO, IDoc is not being created. In case of ME11, it was being created in case of deletion of a line item also.
    Please suggest me...
    Thanks,
    Rudresh
    Mumbai

  • Which case offers the best protection for ipad2 I have tried the SURVIVOR but the little rubber things protecting the ports have broken offthanks

    Which case offers the best protection for the ipad2 I have tried the Survivor however the pieces protecting the ports has ripped off. Any suggestions?

    You had to have some kudos for the effort put in to your thread as week as the point you make.

  • What is the Best case for iPad 2 and something to protect the back

    Hi there I am wanting to protect my dear iPad 2 lol. So I would like some advice on the best cases please,I would to protect the back of it too,I see the smart case is ok but no cover for the back,there are loads on eBay but are they just cheap plastic, any names and place to buy is a great help thank you

    Hello tori77,
    the Best will be what suits your needs.
    I use OtterBox Defender Series for my iDevices.
    http://www.otterbox.com/iPad-2-Defender-Series-Case/APL2-IPAD2-D9-E4OTR_A,defaul t,pd.html
    IMHO you should also have a good screen protector.
    Here is a choice:
    http://store.moshimonde.com/ivisorag-for-ipad2-black.html?gclid=CPvLnf2J2qoCFYXt 7QodbGtD6Q
    No bubbles, removable, washable, reusable.
    The above are also carried by BestBuy.
    Happy Computing,
    A

  • Tune the SQL Query need a Suggestion

    Hi,
    There is a view created which takes 17seconds to execute the query, When i split the query and execute each query takes .15 seconds to execute. Below it the query which i need to improve the performance of the code please need your suggestion in order to tweek so that time take for execution become less
    SELECT 'Parature' "Source",
    NULL "Distibutor",
    reseller_name "Reseller",
    NULL "Reseller City",
    NULL "Reseller State",
    A.Country "Reseller Country",
    DECODE (a.state, 'APAC', 'APAC', 'EMEA', 'EMEA', NULL, 'Unknown', 'US' ) "Reseller Theater",
    NULL "Customer Name",
    NULL "Customer City",
    NULL "Customer State",
    NULL "Customer Country",
    NULL "Customer Theater",
    NULL "Sales Book Date",
    NULL "Ship Date",
    c.sales_order_number "Sales Order Number",
    C.Po_Number "PO Number",
    controller_model_number_1 "Product Name",
    TRIM (UPPER (serial_number_1)) "Product Serial Number",
    c.contract_id "Contract ID",
    product_name "Support Name",
    TO_DATE (c.contract_purchase_date) "Start Date",
    TO_DATE (c.contract_expiration_date) "Expire Date",
    NULL "Header Status",
    NULL "Line Status",
    NULL "Line Type",
    NULL "Termination Reason",
    NULL "Location_id",
    NULL "Product_id"
    FROM edb_assets c,
    edb_accounts a
    WHERE controller_model_number_1 != 'NULL'
    AND Serial_Number_1 != 'NULL'
    AND C.Amid = A.Amid(+)
    UNION
    SELECT 'Parature' "Source",
    NULL "Distibutor",
    reseller_name "Reseller",
    NULL "Reseller City",
    NULL "Reseller State",
    A.Country "Reseller Country",
    DECODE (a.state, 'APAC', 'APAC', 'EMEA', 'EMEA', NULL, 'Unknown', 'US' ) "Reseller Theater",
    NULL "Customer Name",
    NULL "Customer City",
    NULL "Customer State",
    NULL "Customer Country",
    NULL "Customer Theater",
    NULL "Sales Book Date",
    NULL "Ship Date",
    c.sales_order_number "Sales Order Number",
    C.Po_Number "PO Number",
    controller_model_number_2 "Product Name",
    TRIM (UPPER (serial_number_2)) "Product Serial Number",
    c.contract_id "Contract ID",
    product_name "Support Name",
    TO_DATE (c.contract_purchase_date) "Start Date",
    TO_DATE (c.contract_expiration_date) "Expire Date",
    NULL "Header Status",
    NULL "Line Status",
    NULL "Line Type",
    NULL "Termination Reason",
    NULL "Location_id",
    NULL "Product_id"
    FROM edb_assets c,
    edb_accounts a
    WHERE controller_model_number_2 != 'NULL'
    AND serial_number_2 != 'NULL'
    AND C.Amid = A.Amid(+)
    UNION
    SELECT 'Parature' "Source",
    NULL "Distibutor",
    reseller_name "Reseller",
    NULL "Reseller City",
    NULL "Reseller State",
    A.Country "Reseller Country",
    DECODE (a.state, 'APAC', 'APAC', 'EMEA', 'EMEA', NULL, 'Unknown', 'US' ) "Reseller Theater",
    NULL "Customer Name",
    NULL "Customer City",
    NULL "Customer State",
    NULL "Customer Country",
    NULL "Customer Theater",
    NULL "Sales Book Date",
    NULL "Ship Date",
    c.sales_order_number "Sales Order Number",
    C.Po_Number "PO Number",
    controller_model_number_3 "Product Name",
    TRIM (UPPER (serial_number_3)) "Product Serial Number",
    c.contract_id "Contract ID",
    product_name "Support Name",
    TO_DATE (c.contract_purchase_date) "Start Date",
    TO_DATE (c.contract_expiration_date) "Expire Date",
    NULL "Header Status",
    NULL "Line Status",
    NULL "Line Type",
    NULL "Termination Reason",
    NULL "Location_id",
    NULL "Product_id"
    FROM edb_assets c,
    edb_accounts a
    WHERE controller_model_number_3 != 'NULL'
    AND serial_number_3 != 'NULL'
    AND C.Amid = A.Amid(+)
    UNION
    SELECT 'Parature' "Source",
    NULL "Distibutor",
    reseller_name "Reseller",
    NULL "Reseller City",
    NULL "Reseller State",
    A.Country "Reseller Country",
    DECODE (a.state, 'APAC', 'APAC', 'EMEA', 'EMEA', NULL, 'Unknown', 'US' ) "Reseller Theater",
    NULL "Customer Name",
    NULL "Customer City",
    NULL "Customer State",
    NULL "Customer Country",
    NULL "Customer Theater",
    NULL "Sales Book Date",
    NULL "Ship Date",
    c.sales_order_number "Sales Order Number",
    C.Po_Number "PO Number",
    controller_model_number_4 "Product Name",
    TRIM (UPPER (serial_number_4)) "Product Serial Number",
    c.contract_id "Contract ID",
    product_name "Support Name",
    TO_DATE (c.contract_purchase_date) "Start Date",
    TO_DATE (c.contract_expiration_date) "Expire Date",
    NULL "Header Status",
    NULL "Line Status",
    NULL "Line Type",
    NULL "Termination Reason",
    NULL "Location_id",
    NULL "Product_id"
    FROM edb_assets c,
    edb_accounts a
    WHERE controller_model_number_4 != 'NULL'
    AND serial_number_4 != 'NULL'
    AND C.Amid = A.Amid(+)
    UNION
    SELECT 'Parature' "Source",
    NULL "Distibutor",
    reseller_name "Reseller",
    NULL "Reseller City",
    NULL "Reseller State",
    A.Country "Reseller Country",
    DECODE (a.state, 'APAC', 'APAC', 'EMEA', 'EMEA', NULL, 'Unknown', 'US' ) "Reseller Theater",
    NULL "Customer Name",
    NULL "Customer City",
    NULL "Customer State",
    NULL "Customer Country",
    NULL "Customer Theater",
    NULL "Sales Book Date",
    NULL "Ship Date",
    c.sales_order_number "Sales Order Number",
    C.Po_Number "PO Number",
    controller_model_number_5 "Product Name",
    TRIM (UPPER (serial_number_5)) "Product Serial Number",
    c.contract_id "Contract ID",
    product_name "Support Name",
    TO_DATE (c.contract_purchase_date) "Start Date",
    TO_DATE (c.contract_expiration_date) "Expire Date",
    NULL "Header Status",
    NULL "Line Status",
    NULL "Line Type",
    NULL "Termination Reason",
    NULL "Location_id",
    NULL "Product_id"
    FROM edb_assets c,
    edb_accounts a
    WHERE controller_model_number_5 != 'NULL'
    AND serial_number_5 != 'NULL'
    AND C.Amid = A.Amid(+)
    UNION
    SELECT 'ERP' "Source",
    Imv.Bill_To "Distibutor",
    Imv.Ship_To "Reseller",
    Ship_To_City "Reseller City",
    Ship_To_State "Reseller State",
    Edb2_Global.Country_Name_Theater(Imv.Ship_To_Country ,'COUNTRY') "Reseller Country",
    Edb2_Global.Country_Name_Theater(Imv.Ship_To_Country ,'THEATER') "Reseller Theater",
    Cl.Company_Name "Customer Name",
    Cl.City "Customer City",
    Cl.State "Customer State",
    Edb2_Global.Country_Name_Theater(Cl.Country,'COUNTRY') "Customer Country",
    Edb2_Global.Country_Name_Theater(Cl.Country,'THEATER') "Customer Theater",
    Imv.So_Booked_Date "Sales Book Date",
    Imv.Ship_Date "Ship Date",
    Imv.Order_Number "Sales Order Number",
    Imv.Cust_Po_Number "PO Number",
    Cp.Item_Name "Product Name",
    Cp.Product_Serial_Number "Product Serial Number",
    TO_CHAR(Imv.contract_number)"Contract ID",
    Imv.Service_Description "Support Name",
    Imv.Service_Start_Date "Start Date",
    Imv.Service_End_Date "Expire Date",
    Imv.Header_Status "Header Status",
    Imv.Line_Status "Line Status",
    Imv.Line_Type "Line Type",
    Imv.Termination_Reason "Termination Reason",
    Cl.Location_Id "Location_id",
    cp.id "Product_id"
    FROM ib_support_contracts_mv imv,
    customer_products cp,
    customer_locations cl
    WHERE Upper (Trim (Imv.Serial_Number)) = Upper (Trim (Cp.Product_Serial_Number(+)))
    AND Cp.Location_Id = Cl.Location_Id(+)
    There is a union for each and every query, Please suggest how to tweek
    Thanks
    Sudhir

    Try
    select distinct a.*
    from (SELECT 'Parature' "Source",
    NULL "Distibutor",
    reseller_name "Reseller",
    NULL "Reseller City",
    NULL "Reseller State",
    A.Country "Reseller Country",
    DECODE (a.state, 'APAC', 'APAC', 'EMEA', 'EMEA', NULL, 'Unknown', 'US' ) "Reseller Theater",
    NULL "Customer Name",
    NULL "Customer City",
    NULL "Customer State",
    NULL "Customer Country",
    NULL "Customer Theater",
    NULL "Sales Book Date",
    NULL "Ship Date",
    c.sales_order_number "Sales Order Number",
    C.Po_Number "PO Number",
    controller_model_number_1 "Product Name",
    TRIM (UPPER (serial_number_1)) "Product Serial Number",
    c.contract_id "Contract ID",
    product_name "Support Name",
    TO_DATE (c.contract_purchase_date) "Start Date",
    TO_DATE (c.contract_expiration_date) "Expire Date",
    NULL "Header Status",
    NULL "Line Status",
    NULL "Line Type",
    NULL "Termination Reason",
    NULL "Location_id",
    NULL "Product_id"
    FROM edb_assets c,
    edb_accounts a
    WHERE controller_model_number_1 != 'NULL'
    AND Serial_Number_1 != 'NULL'
    AND C.Amid = A.Amid(+)
    union all
    SELECT 'Parature' "Source",
    NULL "Distibutor",
    reseller_name "Reseller",
    NULL "Reseller City",
    NULL "Reseller State",
    A.Country "Reseller Country",
    DECODE (a.state, 'APAC', 'APAC', 'EMEA', 'EMEA', NULL, 'Unknown', 'US' ) "Reseller Theater",
    NULL "Customer Name",
    NULL "Customer City",
    NULL "Customer State",
    NULL "Customer Country",
    NULL "Customer Theater",
    NULL "Sales Book Date",
    NULL "Ship Date",
    c.sales_order_number "Sales Order Number",
    C.Po_Number "PO Number",
    controller_model_number_2 "Product Name",
    TRIM (UPPER (serial_number_2)) "Product Serial Number",
    c.contract_id "Contract ID",
    product_name "Support Name",
    TO_DATE (c.contract_purchase_date) "Start Date",
    TO_DATE (c.contract_expiration_date) "Expire Date",
    NULL "Header Status",
    NULL "Line Status",
    NULL "Line Type",
    NULL "Termination Reason",
    NULL "Location_id",
    NULL "Product_id"
    FROM edb_assets c,
    edb_accounts a
    WHERE controller_model_number_2 != 'NULL'
    AND serial_number_2 != 'NULL'
    AND C.Amid = A.Amid(+)
    union all
    SELECT 'Parature' "Source",
    NULL "Distibutor",
    reseller_name "Reseller",
    NULL "Reseller City",
    NULL "Reseller State",
    A.Country "Reseller Country",
    DECODE (a.state, 'APAC', 'APAC', 'EMEA', 'EMEA', NULL, 'Unknown', 'US' ) "Reseller Theater",
    NULL "Customer Name",
    NULL "Customer City",
    NULL "Customer State",
    NULL "Customer Country",
    NULL "Customer Theater",
    NULL "Sales Book Date",
    NULL "Ship Date",
    c.sales_order_number "Sales Order Number",
    C.Po_Number "PO Number",
    controller_model_number_3 "Product Name",
    TRIM (UPPER (serial_number_3)) "Product Serial Number",
    c.contract_id "Contract ID",
    product_name "Support Name",
    TO_DATE (c.contract_purchase_date) "Start Date",
    TO_DATE (c.contract_expiration_date) "Expire Date",
    NULL "Header Status",
    NULL "Line Status",
    NULL "Line Type",
    NULL "Termination Reason",
    NULL "Location_id",
    NULL "Product_id"
    FROM edb_assets c,
    edb_accounts a
    WHERE controller_model_number_3 != 'NULL'
    AND serial_number_3 != 'NULL'
    AND C.Amid = A.Amid(+)
    union all
    SELECT 'Parature' "Source",
    NULL "Distibutor",
    reseller_name "Reseller",
    NULL "Reseller City",
    NULL "Reseller State",
    A.Country "Reseller Country",
    DECODE (a.state, 'APAC', 'APAC', 'EMEA', 'EMEA', NULL, 'Unknown', 'US' ) "Reseller Theater",
    NULL "Customer Name",
    NULL "Customer City",
    NULL "Customer State",
    NULL "Customer Country",
    NULL "Customer Theater",
    NULL "Sales Book Date",
    NULL "Ship Date",
    c.sales_order_number "Sales Order Number",
    C.Po_Number "PO Number",
    controller_model_number_4 "Product Name",
    TRIM (UPPER (serial_number_4)) "Product Serial Number",
    c.contract_id "Contract ID",
    product_name "Support Name",
    TO_DATE (c.contract_purchase_date) "Start Date",
    TO_DATE (c.contract_expiration_date) "Expire Date",
    NULL "Header Status",
    NULL "Line Status",
    NULL "Line Type",
    NULL "Termination Reason",
    NULL "Location_id",
    NULL "Product_id"
    FROM edb_assets c,
    edb_accounts a
    WHERE controller_model_number_4 != 'NULL'
    AND serial_number_4 != 'NULL'
    AND C.Amid = A.Amid(+)
    union all
    SELECT 'Parature' "Source",
    NULL "Distibutor",
    reseller_name "Reseller",
    NULL "Reseller City",
    NULL "Reseller State",
    A.Country "Reseller Country",
    DECODE (a.state, 'APAC', 'APAC', 'EMEA', 'EMEA', NULL, 'Unknown', 'US' ) "Reseller Theater",
    NULL "Customer Name",
    NULL "Customer City",
    NULL "Customer State",
    NULL "Customer Country",
    NULL "Customer Theater",
    NULL "Sales Book Date",
    NULL "Ship Date",
    c.sales_order_number "Sales Order Number",
    C.Po_Number "PO Number",
    controller_model_number_5 "Product Name",
    TRIM (UPPER (serial_number_5)) "Product Serial Number",
    c.contract_id "Contract ID",
    product_name "Support Name",
    TO_DATE (c.contract_purchase_date) "Start Date",
    TO_DATE (c.contract_expiration_date) "Expire Date",
    NULL "Header Status",
    NULL "Line Status",
    NULL "Line Type",
    NULL "Termination Reason",
    NULL "Location_id",
    NULL "Product_id"
    FROM edb_assets c,
    edb_accounts a
    WHERE controller_model_number_5 != 'NULL'
    AND serial_number_5 != 'NULL'
    AND C.Amid = A.Amid(+)
    union all
    SELECT 'ERP' "Source",
    Imv.Bill_To "Distibutor",
    Imv.Ship_To "Reseller",
    Ship_To_City "Reseller City",
    Ship_To_State "Reseller State",
    Edb2_Global.Country_Name_Theater(Imv.Ship_To_Country ,'COUNTRY') "Reseller Country",
    Edb2_Global.Country_Name_Theater(Imv.Ship_To_Country ,'THEATER') "Reseller Theater",
    Cl.Company_Name "Customer Name",
    Cl.City "Customer City",
    Cl.State "Customer State",
    Edb2_Global.Country_Name_Theater(Cl.Country,'COUNTRY') "Customer Country",
    Edb2_Global.Country_Name_Theater(Cl.Country,'THEATER') "Customer Theater",
    Imv.So_Booked_Date "Sales Book Date",
    Imv.Ship_Date "Ship Date",
    Imv.Order_Number "Sales Order Number",
    Imv.Cust_Po_Number "PO Number",
    Cp.Item_Name "Product Name",
    Cp.Product_Serial_Number "Product Serial Number",
    TO_CHAR(Imv.contract_number)"Contract ID",
    Imv.Service_Description "Support Name",
    Imv.Service_Start_Date "Start Date",
    Imv.Service_End_Date "Expire Date",
    Imv.Header_Status "Header Status",
    Imv.Line_Status "Line Status",
    Imv.Line_Type "Line Type",
    Imv.Termination_Reason "Termination Reason",
    Cl.Location_Id "Location_id",
    cp.id "Product_id"
    FROM ib_support_contracts_mv imv,
    customer_products cp,
    customer_locations cl
    WHERE Upper (Trim (Imv.Serial_Number)) = Upper (Trim (Cp.Product_Serial_Number(+)))
    AND Cp.Location_Id = Cl.Location_Id(+)) a
    Edited by: HuaMin on May 9, 2012 2:58 PM

  • Do I need to install virus protection for the windows portion of the partitioned hard drive on the MacBook Pro?

    Do I need to install virus protection for the windows portion of the partitioned hard drive on the MacBook Pro?

    You are running Windows, so yes. I like Microsoft's built in protection and how 8.1 is 'hardened' but I also install Malwarebytes. I will not use Kaspersky anymore. But you do need something. And 8.1 is more secure than prior versions definitely but there were some major zero-day security updates on this month's "Patch Tuesday."
    The forum for you is "Boot Camp" and this if you look above: Communities / Desktop / Mac Pro is not for MacBook Pro
    MacBook Pro
    Boot Camp

Maybe you are looking for