Need cd for officejet 6600 all in one.

Need the cd to install my printer

Hi,
You won't need the CD. Please download software and drivers from the following link:
    http://support.hp.com/us-en/drivers/selfservice/HP-Officejet-6600-e-All-in-One-Printer-series---H7/4...
But if you wish, you can order a CD using the last item of the above link.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Similar Messages

  • How to download repair of "missing WIA" for officejet J4550 All in one printer

    officejet J4550, all in one
    Problem:  message states "missing WIA"
    I'm missing my installation disk and would like to download the solution to repair/update/install the WIA.
    how to download repair of "missing WIA" for officejet J4550 All in one printer

    HI knewsomga,
    WIA is Windows Image Acquisition, it is a proprietary Microsoft driver model and application programming interface (API) for Microsoft Windows Me and later Windows operating systems that enables graphics software to communicate with imaging hardware such as scanners, digital cameras and Digital Video-equipment. - Source
     Please follow the instructions below.
    Please hold down the windows flag key and the R to open the Run box.
    Type services.msc and press Enter
    Locate Windows Image Acquisition (WIA)
    Right click and open Properties
    Stop the service from the General tab and then Start it again
    Verify that the Startup type is set to Automatic rather then manual
    Also, look for 'Shell Hardware Detection' in the list of services. If it is not enabled/started, make sure to enable/start the service, and make sure the Startup Type set as Automatically from its properties.
    Locate the 'Remote Procedure Call (RPC)' in the list of services. If it is not enabled/started, make sure to enable/start the service, and make sure the Startup Type set as Automatically as well.
    If the issue persist, the HP Print and Scan Dr might help, otherwise I suggest contacting Microsoft.
    Click here to download and run the utility > HP Print and Scan Doctor
    I hope this helps.
    Please click the Thumbs up icon below to thank me for responding.
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Sunshyn2005 - I work on behalf of HP

  • Need generic print driver for Officejet 7210 all-in-one on Windows 8.1

    Updated my Windows 8 to Windows 8.1, which removed my print driver for an Officejet 7210 all-in-one.  Attempted to reinstall.  Error that file not found.  Followed detailed process to a tee (deleted temp files, removed startup programs, everything).  Driver doesn't work but printer does with other computers.  Printer is no longer supported and no help (but is in great working condition).
    I'm looking for a generic driver that would work with my printer and Windows 8.1.  I really appreciate any help...
    This question was solved.
    View Solution.

    Hi LChristofaro,
    I have researched your error message and the Msiexec.exe error and it is an issue with windows installer. I recommend restarting your windows installer.
    To do this:
    1. Run "Services.msc" (without the quotation marks).
    2. Double-click "Windows Installer" in the Services list.
    3. Click Stop and click OK.
    4. Click Start and click OK.
    Restart you computer and try the install again.
    Let me know if this helped.
    Thank you,
    I worked on behalf of HP.

  • WINDOWS 2008 R2 DRIVER FOR OFFICEJET 4610 ALL IN ONE PRINTER

    i am using hp officejet 4610 all in one printer. I need windows 2008 r2 driver for this.
    please help
    saleem

    Hello Saleem,
    Welcome to the Forums
    I have checked the available drivers for your Officejet 4610 and did not see an available driver for Windows 2008 R2. I will post you the link to the drivers that are available below.
    HP Officejet 4610 All-in-One Printer Drivers
    Best wishes,
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

  • Officejet 6600 All But One Laptop Can Connect To Wireless Network Printer

    One windows and 2 macs can connect to the wireless printer over the newtwork just fine  but one (Windows 7) will not. HP Print and Scan Doctor can discover the printer from that laptop as "visible"  but repeatedly says " need to install full software" which I've done, and after, it  runs install wizzard reports, the IP address I've entered is wrong, which it's not. Firewalls are off.  I've un and re installed, tried windows add device which can't connect either. I've had this problem before with this laptop but just can't remember how I fixed it. I remember getting to a screen that offered the option of installing over a nework or wireless directly to the printer and over the network fixed it, but I can't remember how I got there. Any ideas as I'm at wits end. Thanks

    Welcome to the forums @Davidchicago ,
    I read through your post about the installation troubles you are having with one of your Windows 7 computers and your Officejet 6600. I am here to let you know what my suggestion is for you!
    There could be a program blocking the installation and causing the problem. I'd recommend a Clean Boot, restarting your PC, disabling your firewall and running through the installation again.
    Hopefully that will get you through the install. Let me know the results!
    Have a great weekend
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

  • Busy signal when faxing with hp officejet 6600 all-in-one

    I keep getting a busy signal when faxing with all numbers.

    Hi @pbr69,
    Welcome to the HP Forums! 
    I noticed that you are getting a busy signal when faxing with the HP Officejet 6600, and I am happy to help!
    I would recommend to look through this faxing guide, to make sure it is properly configured. Cannot Send or Receive Faxes.
    Also depending on the type of phone connection you are using you may require a different type of configuration. Please also see, How to connect your HP Fax Device to an ISDN, ADSL, PBX, or VoIP line, if you are using one of those types of lines.
    Hope this information helps, and have a wonderful day!
    RnRMusicMan
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to say “Thanks” for helping!

  • Officejet 6600 All In ONe

    When I try to print an envelope with a picture int he left hand corner with our return address -- it deletes the picture and won't print it.  How do I fix this problem?

    Hello rfrantz,
    Welcome to the HP Forums!
    I see that your HP Officejet 6600 will not the picture on your envelopes. I am happy to help you with this printing issue!
    For further assistance, I will need to the following information:
    If you are using a Windows or Mac Operating System, and the version number. To find the exact version, visit this link. Whatsmyos.
    If the printer is connected, Wireless, or USB.
    If the printer is able to make copies by itself.
    If the power cable plugged into a surge protector, or directly to the wall outlet. Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector. This applies to Inkjet printers as well.
    The size of the envelope.
    The program you are printing from.
    Hope to hear from you, and thank you for posting! 
    RnRMusicMan
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to say “Thanks” for helping!

  • Need installer for HP e-all in one printer d411c for Mac OS 10.8.1

    I am unable to setup my new HP e-all in one printer d411c on my MacBook Pro running Mac OS 10.8.1.  Where can I down load driver for the printer?

    I would look on HP's site first. Maybe here http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-107206- 1&cc=us&dlc=en&lc=en&os=219&product=5150158&sw_lang=

  • Printing Mirror Image on HP Officejet 6600 All In One

    Trying to print an Avery (Microsoft)  T-Shirt Template. I am running 64bit  Windows 8.1. I have tried everything to access Mirror Image on my  Printer but I cannot find Mirror Image anywhere. After I click on PROPERTIES I am only shown"Lay Out' & "Paper Quality".  When I click on "ADVANCE SETTINGS" in "LAYOUT" there is  "PRINTER FEATURES"  This only shows "Print in Grayscale";  "Resolution"; Output Quality": HP Realife Technologies"; Borderless Printing" &  " Print all Text as Black.. I have been trying for the last 7 hours to try and figure this out. Hopefully someone can come up with a solution. My warranty  ran out 2 months ago so HP Support wasn't very supportive.

    Hi,
    Pleae try the following instructions:
        http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=bpu02032
    Other option using Word:
       http://www.techrepublic.com/blog/windows-and-office/quick-tip-flip-text-for-a-mirror-image-in-word/#...
    My suggestion: flip image before print. You can use a photo editor to flip images.
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Windows 8.1 will not install the driver for Officejet 6310 All-in-One

    Have downloaded the driver from the HP website, but it will not install. The download wizard "detected a problem with the driver software" but did not say how to resolve it. The option to download the software was still available, so I did that anyway. When attempting to execute from my hard-drive, extraction occurs, followed by a delay, and then a message that reads "This application has requested the Runtime to terminate it in an unusual way". This is in an error box headed "Microsoft Visual C++ Runtime Library".  Can anyone help please? 

    Hi AB-Comp,
    Welcome to the HP Forums! I understand that your are seeing the error The download wizard "detected a problem with the driver software". I am happy to help you with this issue! I have some questions for you:
    What Operating System are you using? Windows or Mac? What version?
    Can you make copies with the printer?
    How is the printer connected? Wireless, Ethernet, or USB?
    Is the power cable plugged into a surge protector or directly to the wall outlet?
    Hope to hear from you, and thank you for posting!
    RnRMusicMan
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to say “Thanks” for helping!

  • Unable to install All-in-one Software & Drivers for Officejet 5610 All-in-One printer

    I downloaded the software "File name: AIO_CDB_NonNet_Full_Win_WW_130_141.exe [1/1, 362.68M] version 13.1.0" and tried to install but was not successful after number of attempts. I tried HP Printer Install Wizard for Windows also but it also failed. I could not download even after number of attempts. It used to get aborted at different stages at every attempt. I am interested in HP solution centre for scanning documents. Please provide solution.

    Hi there , I just wanted to stop in and share my suggestions as well, to hopefully help you out with the installation issue you are having with your Windows 7 system. Try these steps in order: Try unregistering and re-registering the Microsoft Windows Installer service:
    1. Click the Start menu and type " cmd " in the search field and press enter.
    2. Type in " msiexec /unregister " and then press enter.
    3. Type in " msiexec /regserver " and then press enter.
    4. Restart your PC and try the installation. Next, run this SFCS to try and repair any corrupt files in your OS:Using System File Checker to Restore System Files    Let me know the specific results please!Best wishes to you!Show thanks for my reply to help you today by hitting the "thumbs up" icon below!

  • No Drivers for officejet 7410 all-in-one?

    I am having wireless AND driver issues with my previously working perfectly printer.  To bypass the wireless issue I thought I'd just connect with USB to at least get printing capability while I resolve wireless issue.  I had deleted the printer profile when I started having connectivity issues thinking if I started fresh it would be able to connect.  Except now, when I plug in my printer via USB and click on the printer when it shows up in the options, it says NO software update for this machine.  Is it even possible that HP has pulled the drivers?  It's not that old of a machine.  How do I find the drivers if the sofware update method does not work.  I'm on a mac OS 10.8.

    The drivers can be downloaded at the HP site from the link below. 
    Drivers

  • Missing file after installing software for Officejet 6210 All-In-One printer.

    I got the following error message: "The file C:\{Program Files\HP\Digital Imaging\skins\oov1\skin.xml does not exist".  Can anyone tell me where to get the file and then how to download it?  Your help will be much appreciated.

    HI knewsomga,
    WIA is Windows Image Acquisition, it is a proprietary Microsoft driver model and application programming interface (API) for Microsoft Windows Me and later Windows operating systems that enables graphics software to communicate with imaging hardware such as scanners, digital cameras and Digital Video-equipment. - Source
     Please follow the instructions below.
    Please hold down the windows flag key and the R to open the Run box.
    Type services.msc and press Enter
    Locate Windows Image Acquisition (WIA)
    Right click and open Properties
    Stop the service from the General tab and then Start it again
    Verify that the Startup type is set to Automatic rather then manual
    Also, look for 'Shell Hardware Detection' in the list of services. If it is not enabled/started, make sure to enable/start the service, and make sure the Startup Type set as Automatically from its properties.
    Locate the 'Remote Procedure Call (RPC)' in the list of services. If it is not enabled/started, make sure to enable/start the service, and make sure the Startup Type set as Automatically as well.
    If the issue persist, the HP Print and Scan Dr might help, otherwise I suggest contacting Microsoft.
    Click here to download and run the utility > HP Print and Scan Doctor
    I hope this helps.
    Please click the Thumbs up icon below to thank me for responding.
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Sunshyn2005 - I work on behalf of HP

  • Need driver (*.inf) files for HP OfficeJet 5610 All-in-one

    I am setting up a print server and it needs *.inf driver files for my HP OfficeJet 5610 All-in-one printer. Where can i find them? I've installed the drivers on my PC, but they come as *.exe files that will not extract to give the *.inf files. Can anyone help?

    Hello, First I would like to say that I dont like what HP does, I dont want all your software cloging up my computer. What I want if for the hardware I have purchased from you to work the way I want to. Nothing more nothing less. Please give your customers the chance to pick the software they want and not fill up the pc with trash.
    PlanoStar You will find the x86 inf file in the Windows XP Package, it about an 68mb download, just extract EP-CDB-enu_NB.exe using Winrar.
    And ofcourse after the hours spent, with HP trolling you, you would think you are done. Think again. Microsoft will pick up the tradition with some Install x86 Medea ntprint.inf BS. to solve this problem download the files needed from here.
    It will save you hours instead of mounting AIO images and whatever.
    Ps. I have just registered with HP with the sole reason of making this post, and I would just like to say that hp support is rubbish.

  • HP OfficeJet 7110 All-in-One USB'd to PC Need to know how to get mac to see

    Hello all. I am a new mac user and this will become evident soon I am sure. I have a new macbook with the OS X 10.4.10 version. I have a 2.16 duo with 2 gb ram and 120gb hdd. The printer in question is a HP Officejet 7110 all-in-one. The PC it is connected to is a Windows XP 32-bit 1.86 duo 4gb ram. The printer is connected via usb to the pc and works. I have connected the printer to the mac via usb and downloaded the latest drivers for the mac os x version 7.3.1. The printer worked great via usb. I have successfully connected my mac to the pc. I transferred songs and other files to the mac from the pc. I have been searching this forum and apple.com support for ways to get this to work. I even tried the smb://192.168.x.xxx/Patrick/7110 format. I try to print a paper and it goes to print waits awhile then says NT_status something blah or now its saying SMB failed with status 1. I just checked the status of the pc network and i am now connected and sharing with my mac. the printer is also shared on the pc. i have turned on the printer sharing on the mac. Any help with this would be much appreciated.
    Thank you.
    Patrick
    Ps I should tell you how my network is set-up see if you can follow along. My house is hardwired. Meaning every room has a network connection via ethernet. SO have the cable modem into a router. router into i dont know what you call it... its like 4 boxes with 5 connections each, i guess a bigger router for each room, so my PC is hardwired into the house and my mac connects via an airport downstairs that is connected to the pc downstairs that is also hardwired via ethernet. I can see all the computers on the network including the downstairs pc, the canon printer (just cant print), my sisters MACBOOK PRO, my pc, my ps3 and xbox360. So there that is.
    Message was edited by: Flyboy1111
    I tried one more time using the smb://ipaddress/patrick/7110 now it said nt status access denied...try again in 60 sec...unable to connect to SAMBA host retry in 60 sec..
    Message was edited by: Flyboy1111

    although helpful it didnt solve my problem. It might be on my end. My pc is connected to the network. My printer is connected to that pc through a usb cord. Is this possible? I went into printer setup on the mac, typed in the ip address/username/printername and i tried ipadress/printer and neither one worked. all it kept saying is that nt status access denied. I dont know why it would be denied, i dont have a password on that pc. do i need to hook it up someother way or should i just say screw it and just plug it in with the usb to the mac?

Maybe you are looking for