Need clarification for firmware & MPIO version for Oracle RAC

Dear All,
We have two-node Oracle RAC configuration 10gR2, Windos 2033 R2, 64-Bit OS using ASM and Oracle 11gR1 clusterware on HP Blades. The SAN storage is from IBM. We want to upgrade the firmware and MPIO version as per vendor recommendation.
Is there any requirement for Oracle RAC to have specific version of firmware and MPIO? Is there any matrix available for this? Or is it like both nodes should be able to see same SAN storage (LUN) irrespective of version used?
Thanks

Please note that Oracle RAC doesnt have requirement any sepcific firm ware. If you upgrade the firmware, it should not break any existing config, so pls check with IBM.
Also if you are doing any specific firmware upgrade then IBM should provide the supported version list.
Hope this help,
Regards
Satishbabu Gunukula
http://www.oracleracexpert.com

Similar Messages

  • Need latest  SLD and NWDI version for PI 7.1 EHP1

    Can any one update me the latest  SLD and NWDI version for PI 7.1 EHP1?
    Kindly provide me the path of implementation guides for SLD, NWDI  which can be used with PI 7.1 EHP1. For PI 7.1 EHP1, can we use the same version of  SLD and  NWDI which used IN PI 7.1?
    Please help me for the above questions.
    Regards,
    Yuvaraj.

    Hi Yuvaraj,
    Please check the NWDI Development Infrastructure 7.11 and SLD 7.11 for the PI 7.1 EHP1.
    Go to Service Market Place - Software Download > Support Packages and Patches > Support Packages and Patches - Entry by Application Group > SAP NetWeaver and complementary products > SAP NETWEAVER PI > SAP EHP1 FOR SAP NW PI 7.1  >Entry by Component > Development Infrastructure.
    Hope it will helps
    Regards
    Arun Jaiswal

  • Waiting for a new version of Oracle Express Edition?!

    I'm waiting for Oracle XE 11g database, any information about release date? Isn't time for that?

    Tnx for your answer, it was really fast, but I must note that this post you linked to is more than two years old...
    Oracle 11g R2 is on the market for a few months, as well as Oracle Open World in San Francisco is behind the present time...
    I hope it is comming soon...

  • SAP DEMO Database for SAP b1 Version for HANA

    I was wondering if anyone can Help. I have installed the SBODEMO database on SAP B1 version for SAP Hana. V9.0 PL4 and then upgraded to PL9HF (901.00 to 902.001) the SBOCOMMON upgraded ok but SBODEMO database failed on the pre upgrade checks with "Parameter type error in stored procedure SBO_SP_TranasctionNotification and refers to Note 134078. I logged it with SAP and they have said uninstall the SBO DEMO database and then reinstall. Can anybody provide details on how to do this as there are no uninstaller just for the DEMO db as it was installed during the SAP B1 server installation.

    Hi Nathan,
    You can uninstall using uninstall.bin typically located in /opt/sap/SAPBusinessOne. If you deleted /opt/sap/SAPBusinessOne or the uninstall fails you can use the command shown below.
    //Check for B1 rpm files
    rpm -q -a | grep B1
    //remove B1 rpm files
    rpm -q -a | grep B1 | xargs rpm -e
    After uninstalling I would recommend deleting the directory (rm -rf  /opt/sap/SAPBusinessOne).
    Best regards,
    Duncan

  • When trying to download ipodreset utility for windows i get a message that says the installer is intended for 32-bit version for windows. what can i do next?

    when trying to download ipod reset utility for windows i get a message that the installer is intended for 32-bit version of windows. what can i do?

    I assume you have tried everything here?
    iPod: Cannot restore or update in iTunes with error 1415, 1417, 1418, 1428, 1429, 1430, 1436, or 1439
    It doesn't mention 1442, but the same troubleshooting applies.
    It wouldn't hurt to also try another available USB port on your machine and another sync cable if possible.
    Lastly, try restoring the iPod on another PC or Mac running iTunes.
    If you know of somebody with a PC running Windows XP still, ask them if you can download the reset utility and use it to reset the Shuffle.
    B-rock

  • Clarification of Template Builder Versioning for Application Users (EBS)

    Hi all,
    I hope this posts finds you all well.... it is Friday after all :)
    A question on versioning (naming convention is fine).
    I'm using Oracle XML Publisher in E-Business Suite R12 which has a base install of XML Publisher 5.6.3.
    But as Tim notes in his Naming and Versioning post ([http://forums.oracle.com/forums/ann.jspa?annID=451]):
    +"The latest BIP Enterprise release is 10.1.3.2 think of this as 5.6.3"+
    So getting to the point of the question (eventually). If I want to create or modify Templates for E-Business Suite R12 and maintain the latest functionailty do I need to use the BI Publisher Desktop 10.1.3.2.1 for Microsoft Windows?
    Kind Regards,
    Gary.

    What a pleasant way to start a thread.
    I liked your way of starting the post :)
    Keep it up,
    Actually,
    the latest desktop version have some interface for few extra features, but the basic rtf functionality will work the same.
    Crosstab or Pivot is the one , that has been changed totally in Latest. which uses some server side coding. so this wont work in the ebiz, unless you have the latest Bi codeline and libraries
    other than that, latest is same as the old, with extra features,..
    so almost all should work in 5.6.3 in ebiz also..
    let me know, which particular feature you are using in template from latest BIP version
    concluding, if you are editing , the old template, for adding or removing, or formatting, there should not be any problem :)

  • MPIO versions for Windows 2008 SP1 and R2?

    Where can I find a list of the latest versions numbers of MPIO for Windows 2008 SP1 and R2?

    Hi,
    Do you mean the latest version of mpio.sys file?
    After search I think the latest version of mpio.sys is 6.1.7601.21687, Date is 19-Mar-2011.
    For all supported x64-based versions of Windows Server 2008 R2
    Collapse this tableExpand this table
    File name
    File version
    File size
    Date
    Time
    Platform
    Mpio.sys
    6.1.7600.20928
    156,544
    19-Mar-2011
    07:34
    x64
    Mpio.sys
    6.1.7601.21687
    156,544
    19-Mar-2011
    07:45
    x64
    For all supported IA-64-based versions of Windows Server 2008 R2
    Collapse this tableExpand this table
    File name
    File version
    File size
    Date
    Time
    Platform
    Mpio.sys
    6.1.7600.20928
    353,664
    19-Mar-2011
    06:52
    IA-64
    Mpio.sys
    6.1.7601.21687
    353,664
    19-Mar-2011
    06:50
    IA-64
    For more information please refer to following MS articles:
    "0x000000D1" Stop error occurs in the Mpio.sys driver in Windows Server 2008 R2
    http://support.microsoft.com/kb/2511962
    "msdsm.sys” and “mpio.sys" files version after SP2 installation
    http://social.technet.microsoft.com/Forums/en/winserverClustering/thread/c18b5111-9888-4aba-bda5-22a54b7227d9
    Lawrence
    TechNet Community Support

  • Need clarification to write transformation routine for my requirement

    Hi all,
    I have a requirement as mentioned below...
    I have a keyfigure amount which will hold the amount value..now i have been asked to add amount_2000 key figure...it has been done..
    But the real problem is that
    They will give a filter value in DTP selection for the field "area".
    now if they give area as 1000 then the amount field should populat with the respective amount value
    but whereas amount_2000 should populate with only the amount of the area 2000 irrespective of the filter condition given...
    i need to write the routine in the transformation...But the problem is that when we give the filter value in DTP i coudnt get value for amount_2000 as only it gets the value for 1000.
    I hope the requirement is clear...
    can any one help me in this.
    Thanks & Regards,
    Hari.

    Write a routine for the InfoObject amount_2000.
    Use amount and area as source fields.
    Now the coding should look like:
    IF source_fields-area = '2000'.
      RESULT = source_fields-amount.
    ELSE.
      RESULT = 0.
    ENDIF.
    This is independent of the filter values in the DTP.
    Best regards
    Dirk

  • Need clarification on Solaris 10 upgrade for E Business suite application

    Hi All,
    Server details :
    (1)Database tier : Sun Solaris 8 - 64 Bit
    (2)Application tier ( E Business suite application services ): Sun Solaris 8 - 64 Bit
    (3)Application tier ( E Business suite External tier - DMZ configuration ) : Sun Solaris 8 - 64 Bit
    (4)10gAS and discoverer : Sun Solaris 8 - 64 Bit
    We are planning to upgrade the Database tier (1) and Application tier (2) to Sun solaris 10 and leave the Application tier {
    External - DMZ configuration } ( 3) and 10gAS and discoverer ( 4 ) with Sun
    solaris 8 .
    Please let us know if we will be having issues if we perform the OS upgrade in such a way.
    Thanks & Regards,
    Rakesh

    Rakesh,
    There should be no issues with this upgrade path. Just make sure you relink all binaries after an OS Upgrade to ensure that everything is working as expected.
    - Take a backup of the application/database
    - Upgrade the OS
    - Relink all binaries
    - Start up the application/database
    - Take another backup once you confirm that everything works properly
    Note: 356878.1 - How to relink the whole Applications 11i Installation
    https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=356878.1
    Note: 131321.1 - How to Relink Oracle Database Software on UNIX
    https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=131321.1
    Note: 407055.1 - Process To Upgrade the Operating System and Oracle Database Server
    https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=407055.1
    Regards,
    Hussein

  • Want to load WindowXP on Mac. Need clarification between OEM & full version

    First I am totally new and green. Have had MacBook for 6 mos.- Have learned a lot but can't figure this one. I want to load Windows XP. I have installed Leopard, had the drive partitioned but now need to know which XP I need. I have already purchased an OEM version and was told it would not work. I returned to seller. Now I am not sure of the difference between 1) licensed copy, 2)full version 3)OEM version. What do I need to buy??
    Carolyn525

    Most any OEM XP SP2 should work unless it is 'vendor specific' to a particular machine (Dell, etc). The seller should know, most buy from places like Newegg, Amazon etc.
    I use Vista System Builder, which is basically your OEM, you don't get Microsoft support and have to provide your own if you run into trouble and have questions is all.
    If new to Windows, you may want to need to know to configure, choose which security software you want to use, etc. I settled on Kaspersky Internet Suite after trying a couple others (AVG, Norton 2007/2008).

  • Disk Image for Firmware Update Utility for LaserJet p2055dn is corrupted

    Yep.  Not sure what happened with that one. I have submitted the issue to the software team.  Hopefully I can get a copy that works out to you soon. Apologies for the inconvenience.  

    Update to my previous post: HP confirms that their Firmware Update Utility is broken, but there is another way to update the firmware on a LaserJet P2055dn using a Mac running OS X, and here it is. HP tech support walked me through this procedure and it worked for me: Getting the printer ready: ensure that the LaserJet P2055dn is connected to your computer and make it the default printer. In System Preferences / Printers and Scanners, find your HP LaserJet P2055dn, select it, Click “Open Print Queue” and on the Printer menu, choose “Make Default.” On that same menu, choose “Print Test Page” and verify that the page prints.Using your Web browser, go to the following page on the HP website and click the “Download” button. Don’t worry that the page says it’s for Windows Vista. The file you’re about to download is for your HP LaserJet printer and doesn’t care what kind of computer you use to install it. Here’s the link:
    http://h20564.www2.hp.com/hpsc/swd/public/detail?swItemId=ja-143142-1#tab1
    When it finishes downloading, go to your downloads folder and find the file HP_LaserJet_P2055dn_20141201_build155964.rfu
    (note: you'll probably get a “Preparing for HP separation” message;. Just click OK)In your Applications/Utilities folder, find Terminal, and open it. In the Terminal window, type lp (space) but don’t press “return” yet. Drag and drop the above file from your finder window into the Terminal window. Then press “return”Watch the LCD display on your printer. It should go through several steps, beginning with “erasing” and finally saying “ready.”Go back to the printer’s “Print Queue” window and print another test page. If the test page prints properly, congratulations. You've done it!

  • Do I need to change OCI layer to utilize Oracle RAC failover Feature?

    Dear Oracle Experts,
    From the Oracle documents, the RAC is a great feature providing the scalability and high availablility. I thought the failover features should be transparent to users.
    However, from this book:
    http://www.oreilly.com/catalog/oressentials2/chapter/ch01.html
    "For instance, in high-availability implementations in which multiple systems share disks and implement Real Application Clusters/Oracle Parallel Server, you may want users to reattach to a second server transparently if the first fails. You can write programs that do this using OCI. "
    "You can write applications with the Oracle Call Interface (OCI) to provide failover to a second instance transparently to the user. "
    I am confused if RAC failover feature have to depend on OCI user application coding?
    I have an application developed over Oracle 8.1.6, if I buy Oracle9i to use RAC failover feature, should I modify my application at OCI layer to make it work? Can I switch the oracle instance when the original one fails only by RAC setup instead of changing OCI code?
    Thanks.
    Wei
    P.S. I am running application over Compaq tru64 5.1A.

    Hi ,
    As answered by Sumit u need not alter ur application for shifting it to RAC.But there are few things which will determine the perfoemance of your application on RAC and depend on the type of application u use .Application partioning,data partitioning,index partitioning ... look for these topics . This may help.
    The other thing u mentioned abt. Oracle Libraries,DB name,SID .. . Now when u'll have RAC there will be more than 1 Node I believe. So each Node will have its SID,Oracle Binaries but DB name will be same.
    Gud Luck!
    Vijay Shanker
    Edited by: Vijay Shanker on Feb 14, 2009 6:12 PM

  • What is the supported version of Oracle Enterprise Quality Data for WebLogic 12c

    Hi All,
    The recent release of Oracle Enterprise Data Quality is 11.1.1.6.1 for which supported weblogic server is WebLogic 10.3.6
    Can anyone tell me that if WebLogic 12c also is a supported version for Oracle Enterprise Data Quality 11.1.1.6.1 and if no, then which version of Oracle Enterprise Data Quality is supported on WebLogic 12c (12.1.2)
    Its really urgent.Please guide!
    Thanks in Advance!

    Hi,
    Thanks But I already followed this link and I forgot to mention that I am looking for the supported version of Oracle Enterprise Data Quality for Product Data for Oracle WebLogic 12.1.2. In the certification matrix of Oracle Enterprise Data Quality for Product Data 11g it is listed that the supported weblogic version is 10.3.6. So I wanted to know which version of Oracle Enterprise Data Quality for Product Data would support weblogic 12.1.2 or if Oracle Enterprise Data Quality for Product Data 11g is supported on weblogic 12.1.2 also.
    I checked the certfication matrix for Oracle Enterprise Data Quality for Product Data 11g from Oracle Fusion Middleware Supported System Configurations link only.
    Please suggest!

  • Developer version of Oracle for Linux

    I am currently enrolled in a class here at ISU where I am working with an off-campus company to develop a better user database for them. They run Oracle, but we must mirror their system on one of our machines to do the work. I was looking for a developer version of oracle that I can use this semester for this project. Does anyone know where I can get something like this?

    You can download it from OTN.
    null

  • How do I exchange CS5.5 Windows version for a Mac version?

    I bought the downloadable online student version of Adobe Creative Suite 5.5 (windows version) over 2 years ago.  I just bought a Mac and would like to re-install CS but according to Adobe website, I need to exchange the windows version for mac version but since I don't have the most current version of CS (CS6?) I actually have to purchase an upgrade to CS6 first in order to exchange the windows version for mac. Does anyone know how to do this and how much it is going to cost?  I found instructions online that led me to a form that was a little vague and confusing so if anyone knows another way to go about doing this let me know!  Also, I don't think my membership allows me the privilege of actually speaking to someone in customer service. 

    contact adobe support by clicking this link and then clicking 'still need help' as soon as it appears, https://helpx.adobe.com/contact.html

Maybe you are looking for