Need clarification on application of OSS Release Note:391846 in SAP ERP 6.0

Hi Experts,
We are upgrading the SAP R/3 4.7 to SAP ERP 6.0 in one of our client. In SAP R/3 4.7, OSS Note:391846 has been applied for Automatic Explosion of BOM while converting the planned order. I would like to know whether this functionality is covered in SAP ERP 6.0 or is it required to apply the same OSS note in SAP ERP 6.0?
Thanks in advance.
Venkat Bandaru

Dear Venkat,
note 391846 is also valid for ERP600.
This modification is not part of the SAP Standard Release 600. It's also in 600 a modification.
If you want this function you have to implement the note again in your actual release.
Regards,
Sabine

Similar Messages

Need SPA2002 3.1.18 Firmware Release Notes / Changelog

Hi
I have spa2002 with 3.1.5 firmware. Ive seen that a new firmware is available for download but no changelog attached.....
I need the release notes to decide wether upgrade or not.
Thank You in Advance!

Good luck. They don't make it easy for you to find anything let alone something they want to entirely forget about and claim it never happened.
For the SPA1001 try here.

Understanding bug ID and release notes documentation

Hi !
we planned to upgrade IOS switch on some switches, most switches are running 4 to 10 or more IOS release in late in compare to the most recent one. We would like to upgrade because we had some issue with port flapping and spanning-tree portfast issue with switches. I find in one release document some element looklike solve some of our problems.
So before upgrading we would like to avoid more issue or different issue which may have bigger impact we had actually, so I read latest release notes of our plate-form to choose the correct release for our need....
I find some bug ID in release notes 12.2(55)SE mark as Resolved and do not find it in 12.2(54)SE or 12.2(53)SE as "open" and some bug open in 12.2(53)SE as open and nothing about those in the next 2 releases (Open or Resolved).
So how can I choose correct release for our need, while also minimised required reading release notes documentation !
Thanks !

If the bug was discovered after the 12.2(54)SE release notes were published, only the 12.2(55)SE release note will show the fix. The older release notes will not be updated with bugs discovered after the relesae note is "printed." Only the most current release note has the most current data.
Bugs mentioned in 12.2(53)SE release note SHOULD have a follow up in future release notes, unless engineers determined that the bug was not a bug at all, but an expected behaviour, a customer misconfiguration, or a transient, unreproducable event.
The interactive Bug Tooklit is the best way to tell where a bug applies. If you plug in the bug ids about which you have questions, you can see a real time picture of the current state of every bug id mentioned in the release notes.

Release notes for ECC6.0

Hi Friends,
I want the Release notes and version comparision for ECC6.0, as our client is going to upgrade from 4.6c to ECC6.0. I went through the related threads where i found the website servive.sap.com. But the thing is that i'm nt able to access that as i'm nt having user id & password. so can any one help me out apart from this site where can i get the release notes.

Check this way...
http://service.sap.com/releasenotes
Release Notes
mySAP Solutions
mySAP ERP
SAP ERP 2004
SAP ERP 2005
ECC 6.0
German
English
Japanese
R/3
in the left corner you can see links for ECC5.0, ECC6.0 etc. you can click and see what is the difference between older and latest one.

Release Notes SAP 4.7 - 6.0

Hi,
can you tell me where can I find release notes to SAP upgrade 4.7 to 6.0. I am interested in MM module.
Thank you in advance.
Kasia.

Hi,
Please check the Below link for the Release notes
http://help.sap.com/saphelp_46C/helpdata/EN/8e/b40d35b4909a67e10000009b38f83b/frameset.htm
regards,
santosh

Fix Pack 1.3 Release Notes

Hi,
Anyone seen the release notes for BOXI 3.1 Fix Pack 1.3?
Thanks.

Hi,
Two seperate entries further down the hotfix list on http://service.sap.com/bosap-downloads
Fixpack 1.3 Release Notes:
https://smpdl.sap-ag.de/~sapidb/012002523100003021502009E/boxi31_fp13_release_notes.pdf
Fixpack 1.3 Fixed Issues:
https://smpdl.sap-ag.de/~sapidb/012002523100003021492009E/boxi31_fp13_fixed_issues.pdf
Weren't visible yesterday - so seem to have magically appeared overnight.
Enjoy.

I have an iphone 4, when I upgraded to ios 7.1.1 the application 'superlive pro' is not functioning well it is stucked and some times the device needs to be restarted

I have an iphone 4, when I upgraded to ios 7.1.1 the application 'superlive pro' is not functioning well it is stucked and some times the device needs to be restarted

if there is a compatability between the app and newer versions of the ios then likely the developer if he/she knows about it will release an update fixing the issue
but of cause the developer has to know about it so maybe you should inform the developer about the issue and wait for a fix

Does anyone know of a simple home accounting application? iBank does not seem to be that user friendly and has more features than I need. I would like something that will connect to my bank and will allow the creation of a budget that is simple.

I am looking for a very simple home accounting application. iBank seems to not be very intuitive and it has more features than I need. I am looking for the ability to create a budget and keep a bank register with the ability to connect to my bank and do updates.

I have a small business, I chose Quickbooks because anything else cost much more. That triggered the hiring of a bookkeeper who knew how to use it. It was not the cheapest choice after all.

I am using UPK developer 12.1.0 single user. My sofware has crashed and needs reinstallation. Please suggest how can I take back up of my source files. I am unable to open the application and i can not locate the library backup folder on my local machine.

I am using UPK developer 12.1.0 single user. My sofware has crashed and needs reinstallation. Please suggest how can I take back up of my source files. I am unable to open the application and i can not locate the library backup folder on my local machine.
Also, does reinstallation takes the back up automatically or the files will be lost. Please help.

Here are a bunch of scripts to get folder size under all circumstances. Take your pick.
https://gallery.technet.microsoft.com/scriptcenter/site/search?query=get%20folder%20size&f%5B0%5D.Value=get%20folder%20size&f%5B0%5D.Type=SearchText&ac=2
¯\_(ツ)_/¯

Release notes for 2.16 states that there was a fix for alerts not being modal. We are using 3.0.6 and are experiencing the same issue; was there a regression to the modal fix. What version needs to be used to make sure that alert messages are modal?

Release notes for 2.16 states that there was a fix for alerts not being modal. We are using 3.0.6 and are experiencing the same issue; was there a regression to the modal fix. What version needs to be used to make sure that alert messages are modal?

We are trying to determine why alert boxes are not modal
The fix states it's for Firefox 2.0 - 3.7a1pre
We are using 3.0.6 not the current version of 3.6.13.
Add-on release notes 2.16.1
https://addons.mozilla.org/en-US/firefox/addon/foxyproxy-standard/versions/
Repeating 2.16 release notes since 2.16 was not made available for more than a couple of hours
Fixed bug whereby some alert boxes weren't properly parented/owned. This led to some alerts not being properly modal
with respect to the window/dialog that issued the alert.

"Could not get needed resources for application to be launched (id=-669)"

I keep getting this message
Setup Resourses Status
Could not get needed resources for application [App name. edir path] to
be launched (id=-669).
Problem: Unable to connect to server [server name]
I am able to browse to the server no problem as well as map a drive
directly to it?
I am not sure why I am getting this ?

This is under the "Environment" portion of the "Run Tab"
Craig Wilson - MCNE, MCSE, CCNA
Novell Support Forums Volunteer Sysop
Novell does not officially monitor these forums.
Suggestions/Opinions/Statements made by me are solely my own.
These thoughts may not be shared either Novell or any rational human.
<[email protected]> wrote in message
news:[email protected]...
> Craig where do I to determine that? I know it has to run as admin but I
> am not sure if it is set like that...
>
>> Is the application configured to run "Normal", "Secure System User", or
>> "Unsecure System User".
>>
>> Methods #2 and #3 require the workstation not the user to have rights
> and
>> require the use of UNC instead of a mapped drive.
>>
>> --
>> Craig Wilson - MCNE, MCSE, CCNA
>> Novell Support Forums Volunteer Sysop
>>
>> Novell does not officially monitor these forums.
>>
>> Suggestions/Opinions/Statements made by me are solely my own.
>> These thoughts may not be shared either Novell or any rational human.
>>
>> <[email protected]> wrote in message
>> news:[email protected]...
>> > It is associated with the user and I can get access to the exe via
> their
>> > PC using their login
>> >
>> >> ,
>> >> > Could not get needed resources for application [App name. edir
> path]
>> > to
>> >> > be launched (id=-669).
>> >> >
>> >> > Problem: Unable to connect to server [server name]
>> >> >
>> >> > I am able to browse to the server no problem as well as map a drive
>> >> > directly to it?
>> >> >
>> >> -669 is "wrong password" IIRC. Is this app associated to user or WS,
> ie
>> > is
>> >> t trying to access that path wth the User's or Workstation's
>> > credentials?
>> >>
>> >> - Anders Gustafsson, Engineer, CNE6, ASE
>> >> NSC Volunteer Sysop
>> >> Pedago, The Aaland Islands (N60 E20)
>> >>
>> >> Novell does not monitor these forums officially.
>> >> Enhancement requests for all Novell products may be made at
>> >> http://support.novell.com/enhancement
>> >>
>> >> Using VA 5.51 build 315 on Windows 2000 build 2600
>> >>
>> >
>>
>>
>

Reports not running on Application Server 10g Release 3 (10.1.3)

Hi,
I've downloaded Application Server 10g Release 3 (10.1.3) from Oracle website and installed on my system in order configure report server and to run JSP web reports. But i'm unable to run web reports using the above version of Application server.
While checking the componets included in above version of Application server(10.1.3), I found that it doesn't have "Forms and Reports services" included in it.
Could anybody please confirm if its the reason why i'm not able to run the reports. What version of Application server should i download in order to configure and Run Web Reports?
I would appreciate your expert advice on this.
Thanks
Ratheesh

What version
of Application server should i download in order to
configure and Run Web Reports?10.1.2.0.2
http://www.oracle.com/technology/software/products/ias/htdocs/101202.html
See also Re: 10.1.3 - Reports Server?

Policy Agent 2.2 release notes highlight need for 32 bit - SPARC?

Just to be clear, I don't really believe the release notes in this case, but I would like to hear from someone who knows.
Basically this document :
http://docs.sun.com/app/docs/doc/819-2796/adtcb?a=view
Contains the following entry :
Besides Agent for Apache HTTP Server 2.0.54, web agents do not support the 64-bit version of a deployment container (6474344)
For example, Agent for Sun Java System Web Server 6.1 does not support the 64-bit release of Sun Java System Web Server 6.1.
Workaround:Except when using Agent for Apache HTTP Server 2.0.54, do not use a web agent with a 64-bit version of the supported web container.
I am trying to work out how to comply with this requirement. There seems to be no separate download of a 32 bit version of any server for sparc at present. Nor is there any production of 32 bit sparc hardware ...
respectfully
BJ

This note is applicable to agents for various web servers like Apache, Sun WS6, IIS, Sun Proxy 4, Lotus Domino etc servers. These agents are 32-bit ones by default. 64-bit support is not there yet for all the agents.
-Subba

Application error during release to LiveCache

Hi Experts.
I got some orders stucked in my Outbound Queue in ECC side as SysFail with the error "Application error during release to LiveCache". When I click to activate the queue the order is released and transferred to APO. The question is Why is getting stopped?
Thank you!

Hi Everybody.
SAP Provided me a note to implement to fix this issue. The note number is 1238616 but I need to understand how to reproduce this error in SandBox to implement this note and check if the problem will get fixed...
Currently my OSS is assigned to SAP (Live Cache team) to let me know the root cause for this problem and how to reproduce in lower environment (sandbox) to implement the note and check if the problem will get fixed.
As work around we are manually activating these errors in CIF queues that are getting clean.

Need clarification for these names, R/3, WAS, NetWeaver

Hi All
I posted the question on WAS preview installation, then I realized I should have put it here. Here is the link to that post:
Need clarification for these names, R/3, WAS, NetWeaver
Thanks again for any input
Xueqing
Added the link to the first post
Message was edited by: xueqing Han

Hi Xueqing,
First of all, sorry for any confusion that we have caused you. I hope I can give you an answer that will clear up the confusion. Sorry, but it is a long explanation of the development of two application solution but history tends to be very long winded!
It is not true SAP R/3 Enterprise equals SAP Web AS, and I'll hopefully explain why:
In the beginning (at least in the client server world) SAP only ship SAP R/3. The technology layer under SAP R/3 was called SAP Basis. There was only SAP Basis under SAP R/3.
SAP then started to deliver other software solutions that were not included in or built on the SAP R/3 software. These included SAP Business Information Warehouse, SAP APO, SAP SEM, SAP CRM, and the list goes on.
These solutions needed to run on technology layer (like SAP R/3 did). SAP Basis was the obvious choice for this because of the common technology layer providing DB/OS abstraction and a coding environment.
~2001:
Later there came the need to have SAP Basis support the web and its web standards and other programming languages. This radically changed what SAP Basis was and we decided to rename the new technology layer to SAP Web Application Server (SAP Web AS). So the SAP Basis name was retired and SAP Basis 4.6D was the last release called SAP Basis.
The new release and the "technology change" means that all the applications mentioned above now ran on SAP Web AS. The first release of SAP Web AS was 6.10.
~2002:
SAP Web AS was first used in SAP R/3 Enterprise release .
The important fact is that SAP R/3 Enterprise runs on SAP Web AS. SAP R/3 Enterprise = SAP R/3 business applications + new business functions + SAP Web AS.
~2003:
I hope the above explanation is clear, because technology takes another major change. It was realized that SAP now had a collection of business solutions/applications (SAP R/3, mySAP CRM, mySAP SCM, etc) and a collection of technology solutions (SAP Web AS, SAP BW, SAP EP, etc). The technology requirements for the business solutions did not end at SAP Web AS, they needed portal, data warehouse, knowledge management capabilities, etc to develop business solutions on.
To address this SAP made the decision to combine all the technology solutions and tools into one single platform. This made complete sense for developers (SAP, Partners and customers). This single platform is called SAP NetWeaver. It includes all the old individual components of SAP Web AS, SAP BW, SAP KM, SAP EP, etc).
~2004:
I think you can guess what the next step is. Yes, the new release of SAP R/3. Since the release of SAP R/3 Enterprise and the release of SAP NetWeaver, SAP R/3's name changes. It is now called mySAP ERP as it includes a lot of applications that were previously sold separately (like SAP SEM, MSS, ESS, etc).
So now mySAP ERP runs on SAP NetWeaver (yes everything that was in SAP Basis and then in SAP Web AS is still there but SAP NetWeaver has so much more now).
Also with the release of SAP NetWeaver, SAP starts to stop using the old technology component names - you will not hear us talk about SAP Web AS, SAP BW, etc anymore, just SAP NetWeaver releases.
In addition all the other SAP business applications also run on SAP NetWeaver, so the latest version of mySAP CRM, mySAP SRM, and mySAP SCM all run on SAP NetWeaver.
So to simplify the explanation, it would be :
Evolution of SAP R/3:
SAP R/3 (up to release 4.6c) -> SAP R/3 Enterprise (releases 1.00 through 2.00 -> mySAP ERP (2004 onward)
Evolution of Basis:
SAP Basis (up to release 4.6d) -> SAP Web AS (up to release 6.40 which was included in SAP NetWeaver '04) -> SAP NetWeaver (2004 onward)
SAP NetWeaver and mySAP ERP have their own release cycles. mySAP ERP always has an underlying technology release that it is built on (this is a SAP NetWeaver release)
I hope this helps,
Mike.

Need clarification on application of OSS Release Note:391846 in SAP ERP 6.0

Similar Messages

Maybe you are looking for