Need clarification on Price unit(MBEW-PEINH) in Accounding view

Hi
In field selection Group ( OMSR ) for the filed MBEW-PEINH it is defined under 033
when we select Accounting view for any material type under Creation or Change filed MBEW-PEINH  is showing as Display ( grey out ), even though it is defined as Optional entry field. [through OMS9 ],  But when we select Costing view along with Accounting view then the field MBEW-PEINH shows as optional entry
Checkd in Table T130F, for filed name MBEW-PEINH found an entry underfiled T130F-SFGRU ( Special Field Selection Group ) a value 032.
How to delete this entry?
Thanks in Advace

Hi Antony,
Thanks for your prompt reply. But need more clarity.
When i go for creation or change(MM01 or MM02) any material type in the accounting view price unit(MBEW-PEINH) field is grey out i.e only in display mode.
But if i select the accounting view along with costing view the field price unit is editable.This despite maintaining the optional or required entry for field status group 033.
When i checked in T130F(Material master field attributes table) found an entry under the field special field selection group(T130F-SFGUR) with a value of 032.
My question is how to remove this value in this field Special field selection group (T130F-SFGUR)?
Regards

Similar Messages

  • Set default value for price unit when creating material master data

    HI: Every
    could you tell me how to use user-exit or else ways to set default value(such as 1000) for field "Price unit" (MBEW-PEINH) when creating material master data(MM01)?
    I have try to use Exit:EXIT_SAPLMGMU_001. However, this way cannot respones it.
    thanks
    Henry

    Hi: Ihave find out a solution
    Use BADI: BADI_MATERIAL_REF
    SPROlogistics general enhancement supplement or change default data (industry)
    And then creating a Implementation Name
    Double click method: CREATE_MATERIAL
    And then write code as below:
    method IF_EX_MATERIAL_REFERENCE~CREATE_MATERIAL.
              c_mbew-peinh = '1000' .
    endmethod.
    However, SAP still store '1000' in database evenif we change the default value such as 100 when we use TCode MM01.
    in additional, we still use MM02 to change the default value such as '100'
    can anybody tell me how to do?
    thanks
    Henry

  • Material Master Price Unit field MBEW-PEINH

    Hello,
    In my experience I've always dealt with the Price Unit being equal to 1000 (1.00 for 1 ; 1000.00 for 1000). It is my understanding that this was decided upon due to the decimal point limitation. In my new project, everything is set to 1. Is this an issue at all? If a few parts are less than .01, could just those be set to per 100 or 1000?

    Hi,
    the price unit can be set on plant level of material master.
    nd it is highly suggested to set the price unit to a level where the valuation price is something like 494,99 / 1000 units instead of 4,95 / 10 units or 0,50 / 1 unit (I've already rounded the values as SAP would do).
    best regards, Christian

  • Price unit field MBEW-VJPEI

    Hi Gurus,
    I would like to change the price unit for previous fiscal year which is right now 1 : I would like to change to 1000; I already have made it for MBEW-PEINH and MBEW-VMPEI by tcode MM17 but I don't know how to make it for MBEW-VJPEI as this field does not exist in MBEWH.
    Does someone have clues about this?
    Thanks and best regards

    Hi
    If it is related to price change of materila check at TCode MR21.
    Srinivas

  • I need to add push button to last extended price unit in sale order item B

    i need to add push button to field  last extended price unit in sale order item additional data B

    i need to add push button to field  last extended price unit in sale order item additional data B

  • Remove default Price Unit from PO Condition type

    Hi,
    I'm an ABAPer.
    We have a requirement to remove the default(which is '1') Price Unit(PEINH) from 'Conditions' Tab in PO for a particular PO Type.
    Could you please suggest if there is any customizing for this?
    Thanks & Regards,
    Adithya M.

    Sorry.. My first sentence was a typo..
    As of my knowledge, You can can't set the field as blank.
    It can be defaulted on PO via info record.
    If you maintain the field value as 100 in info record, then it will carry to PO.
    Regards
    Dev

  • Can we Default PRICE UNIT value in Line Item Tab?

    Hi Everyone,
    As the PRICE UNIT value of MATERIALS is 1 as default.
    Can anyone suggest me the way to change this default value say to 1000 so that when next time Material is pulled, new default value also pull automatically.
    Thanks in advance
    Rakesh

    Hi,
    Not for Price unit in RFx but we had a similar requirement in Master Agreements wherein we needed to default the ECC Integration fields within predetermined values. We had achieved this via scripting.
    For you purpose, you can use the following:
    Scripting Context: Document Lifecycle Event
    External ID:SAPINT_LineitemValidate
    Class: Rfx Line Item(783)
    Script: import com.frictionless.sap.integration.event.RfxLineItemEventHandler
    Herein you can specify the Pricing Unit = "1000";
    Hope this is of help to you.
    Thanks,
    Vikram Shukla

  • Default costing lot size and price unit as 100 in material master

    Hello,
    The costing lot size and price unit is "1" by default in material master. Due to this in CK11N the costing lot size is coming as 1.
    Then we go to MM02 and change the master by making costing lot size as 100 and price unit as 100.
    Please advise how can we make this default as 100 instead of 1 in material master. So that everytime we don't need to change.
    Is it coming from BOM?
    Please suggest.
    Regards,
    Tapan

    Hi Tapan
    No doubts, it is ABAP's responsibility to develop it.. It requires ABAP code to be written
    The functional specifications need to be given by you.. This BADI is called during Mat Master Creation/Change.. Your Func Specs should cover
    1. Which Mat types it should be used for
    2. The costing lot size and price unit to be defaulted...
    I used it to check Plant = Profit Center and it worked... For whatever checks and validations required during Mat Master creation, this badi needs to be used
    Regards
    Ajay M

  • Price unit is incorrectly changed from 1000 to 1 - Impact and correction steps

    Dear Experts,
    We have noticed  there was a Price change ( MR21)  for the materials.
    However during the process,  price unit was wrongly changed to 1. ( Original price unit of the materials consists of 1000, 100, 10 etc)
    Due to this there is a huge impact on Inventory, and other inventory related transactions.
    We noticed , so far these transactions happened and the corresponding accouting documents.
    Need your inputs - best way to post the rectification entries.
    MB01
    10 Accounting Docs
    MFBF
    200 Accounting Docs
    MIGO_GR
    10 Accounting Docs
    MR21
    15 Accounting Docs
    Rds
    SB

    Hi madevi,
    Change in price unit may change the Costing Lot Size in a Costing view of MMR.
    However, I dont see any adverse implications on anything. This is advisable.
    Regards,
    Pravin

  • Order Price unit (OPU) in Purchase Order

    Hi,
    The behaviour of the order price unit (OPU)in the SAP purchase order is unpredictable, Sometimes after the creation of the PO is cannot be changed and sometimes it is changeable. Kindly elaborate what factors influence the changeability of order price (OPU) unit in the PO.
    Thanks & Regards,
    Mohit

    HI,
    In the purchase order, it is possible to specify an order price unit (OPUn) as well as the order unit (OUn). The order price unit is valid in connection with the  net price and is the basis used when valuating the goods receipt and verifying the invoice. You therefore need to enter the delivered quantity in both units of measure when the goods are received (OUn and OPUn).
    Example: You order frozen geese, 10 pieces at the price of 5 euros per kg. In the purchase order, you assume that one goose has an average weight of 4 kg (order value 40 kg * 5 euros). During the goods receipt, you determine that 10 geese
    weigh a total of 45 kg. For the valuation of the goods receipt and the invoice verification, there is an amount of 45 kg * 5 euros for the 10 geese.
    So, after GR, system will not allowed for change OUn.
    Regards,
    Pardeep Malik

  • Re: open purchase order list with price unit

    Hi Guru,
    Please inform if SAP have transaction which can show the list of our open
    order complete with price unit of material.
    Thanks
    Regards
    siva

    i think to get price per unit with the open PO you have to develop an customized report so contact your ABAP team with your requirement and develop a customized report.
    regards,
    qsm sap

  • Purchase order contains an order price unit that differs from the order uni

    Purchase order contains an order price unit that differs from the order unit
    Treatment at the time of "Goods Receipt" so that the stock maintained in Kg and at the same time the purcahse order unit is also to be entered at the time of GR.

    the purchase requisition has your valuation, this is not the price you have with your vendor.
    The valuation in the PR, is automatically copied from material master, dependend on the price control, it is either the moving average or the standard price, the valuation of your current stock. If MAP then this valuation was calculated by historic stock values and receipts from maybe several vendors.
    the valuation is mainly used for the release procedure.

  • CCM 2.0: Field price unit in the csv file

    Hello Colleagues,
    We have SRM 5.5 with CCM 2.0
    We would like to know the name of the column field in the csv file to indicate the price unit. For example, we have articles that the price is 93€ / 1.000 Units. We would like to know the name of the field in the csv file to enter 1.000 and if it is necessary some customization in the SRM to activate this field.
    Thank-you.

    Hello Colleagues,
    We have SRM 5.5 with CCM 2.0
    We would like to know the name of the column field in the csv file to indicate the price unit. For example, we have articles that the price is 93€ / 1.000 Units. We would like to know the name of the field in the csv file to enter 1.000 and if it is necessary some customization in the SRM to activate this field.
    Thank-you.

  • Price unit field in material master

    Hi all,
    Could you please tell me the use of price unit field in accounting view of material master? I know that it is the unit in terms of which standard price is maintained in material master. I also know that it should be equal or less than costing lot size. But i wanted to know if there is any other impact/use of this field like impact on per unit price etc.
    Regards
    Suresh

    Hi
    You have understood it correct...
    Just to add one more point, SAP recommends Price Unit to be higher i.e. 100 or 1000 in order to avoid rounding differences in Product Costing, variance calculation
    Br, Ajay M

  • FM for Material Price Unit Conversion

    Hi
    Can anybody pls let me the FM for converting the price unit of a material.
    From any given "Order Price Unit" to any "Base Price Unit"
    Ex: from Order Proce unit is "KG" and Base price unit is "CS"

    hI
    Thanks for your response.  But this FM did not serve my purpose.
    Pls let me if any other.

Maybe you are looking for