Need clarification on SAP notes

Hi,
I need information on SAP notes relation.
Suppose a note X says corrections are delivered in the attached correction instruction, then its enough if we implement that specific note X.
If we go to correction instruction then it may have several other notes, do we need to implement all those notes specified  in correction instruction 1st and then implement main note or directly we can apply Main note X.
If we apply main note obvisoulsy all the notes within correction instructions will be implemented
Regards,
Ravi

Hi Ravi
Suppose a note X says corrections are delivered in the attached correction instruction, then its enough if we implement that specific note X.
=>Before implementing those correction verify whether that X note applicable to your system release. Also verify is any manual code correction instructed in that note.
If we go to correction instruction then it may have several other notes, do we need to implement all those notes specified in correction instruction 1st and then implement main note or directly we can apply Main note X.
=> Before implementing those correction verify whether that X note applicable to your system release or its already implemented in your system. All these Prerequisites need to implement before final correction.
If we apply main note obvisoulsy all the notes within correction instructions will be implemented.
=> No we need to implement Prerequisites notes before main notes.
Thank

Similar Messages

  • Clarification on SAP note 835466

    Hi,
    I need to proceed with the SAP note 835466 and I would like the clarification on steps # 3 and # 9 from it.
    The prerequisities note 834897 and the relevant application were applied already.
    Please can someone on this one?
    Thanks.

    Hi,
    I understand it in that way.
    You SP level is too low to be able to implement the note correction.
    You have first to update at least to SP 55 before being able to implement the note correction.
    That is one of the reason, to import regularly Support Packages.
    Regards,
    Olivier

  • Need clarification on SAP NetWeaver Certification

    I am having six months experience in SAP. Now I have planned to take NetWeaver certification. I know the following ways.
    1) Attend an Instructor-led ABAP Certification Academy(25 working days, 8hrs/day, 5 days/week, approx Rs.3 Lakh) at an SAP Education Center or Partner such as Siemens, Genovate etc.
    2) Attend an e-learning course at an SAP Online Contact Center(flexible times, no instructor, approx Rs.1,25,000)
    3) Get your company to endorse your ABAP Experience and sponsor your certification(approx Rs.28000, exam only, no materials, no training!)
    4) Register for SAP TechEd and hope they offer a complimentary certification like they do every year(3 days, lots of fun, should be around Rs.15000, no training, a few materials)
    But I heard that there is one more way of doing that, without affording such a big amount and having less experience. Is that true? Can anyone help me out?
    regards
    prabhu

    Hi Ravi
    Suppose a note X says corrections are delivered in the attached correction instruction, then its enough if we implement that specific note X.
    =>Before implementing those correction verify whether that X note applicable to your system release. Also verify is any manual code correction instructed in that note.
    If we go to correction instruction then it may have several other notes, do we need to implement all those notes specified in correction instruction 1st and then implement main note or directly we can apply Main note X.
    => Before implementing those correction verify whether that X note applicable to your system release or its already implemented in your system. All these Prerequisites need to implement before final correction.
    If we apply main note obvisoulsy all the notes within correction instructions will be implemented.
    => No we need to implement Prerequisites notes before main notes.
    Thank

  • Clarification on SAP Note 961897

    Hi,
    We are currently on SAP BASIS 620 --> SAPKB62052.
    With regard to the SAP Note 961897, it has been mentioned that the problem mentioned in the note has been solved in SAP BASIS SAPKB62062, I understand that, if our SP is below SAPKB62062, then we should implement the note corrections.
    But, If we go and see the correction instruction 803799 relevant for 620 release, it has been mentioned that the correction instruction is only valid for SAPKB62055-SAPKB62061.
    Just to try out, I also downloaded the same note through SNOTE and the note has become grey and says this note can not be applied.
    1 --> Is that means this note need not be applied for SAPKB62052.
    ( means the reported problem is irrelevant for SAPKB62052)
    (or)
    2)  --> or the correction instructions for SAPKB62052 is not yet released and we should wait
    Appreciate feedback from someone who faced the same problem.
    Thanks & Regards,
    Raghunahth L

    Hi,
    I understand it in that way.
    You SP level is too low to be able to implement the note correction.
    You have first to update at least to SP 55 before being able to implement the note correction.
    That is one of the reason, to import regularly Support Packages.
    Regards,
    Olivier

  • Clarification on SAP Note 612132-Stock consistency between serial & MM-IM

    In the above Note 612132 SAP Question Number 3 is as under:
    Question:
    How do I achieve a consistent initial status if I have already (inconsistent) stocks?
    Answer:
    With the execution of a complete physical inventory under required serialization conditions, all stocks are serialized or existing inconsistencies are corrected.
    Can anybody explain the steps to be performed to achieve this consistency.
    Regards
    Rajkumar Reddy
    Edited by: Rajkumar Reddy on Aug 26, 2009 8:51 AM

    Hi,
    What is the volume of data you copied. Also have you followed the best practice of minimal/no activity in the source client.
    The dictionary differences seems to be becuase of some SPs not applied in your ECP system yet
    Regards,
    Sanujit

  • Clarification on SAP Notes 1873559

    Hi,
    I want to clarify something about 1873559 - B1iF_Using the DB Purge Tool for Database Size Reduction.
    In Step 9, it says:
    Shrink the integration framework database (e. g. using SQL Server Management Studio 'Shrink' option).
    Under the Shrink task, there are 2 options, Database and Files.  Which one to choose?
    Either which, will the shrinking help to reduce the size of the mdf file?  Because the Intercompany mdf file is now over 40GB and the C drive is running out space.
    Please advise how to reduce the size of the mdf file (not just the LDF file).
    Thanks.
    Regards,
    Richmond

    Hi Richmond,
    Choose shrink database as it will shrink both .mdf and .LDF file.
    Regards,
    Qiaoli

  • Related to SAP Notes Implementation

    Hi Guys,
    I have a dbt and need a clarification on SAP Note.
    How I will be able to know by seeing the SAP Note or how I can judge my self that either (SAP Note)  should be implemented thru manually or using SNOTE transaction.
    Regards,
    Ravi Ganji

    hi Ravi,
       SNOTE Transaction is available from 4.6C version owards only ... and to know whether you have to apply it manually or through SNOTE you will have to confirm it by the user ... for details refer
    OSS Note
    http://www.sappoint.com/basis/.pdf
    http://www.sap-img.com/basis/oss-notes.htm
    http://www.sap-img.com/basis/manually-applying-the-oss-note.htm
    Regards,
    Santosh

  • Sap note applying

    Hi Folks,
                    I need to apply Sap note 791240 in my dev system.I have run SNOTE & down loaded note .But i cannot see that note in the  NEW list.Can any body let me know whether it is down loaded to the system or not.Also is there any other go to apply THE ABOVE NOTE.Please help me out on this issue.
    Thanks in advance,
    Regards,
    chandu

    Hi Rohit,subash
                  when i tried to implement that note i got a screen saying to upload some list of sap notes n i did but finally after giving reauest no it terminated does this going to make any thing wrong in my dev system?
    Please suggest me what exactly i need to do.
    Thanks guys in advance,
    Regards,
    chandu

  • SAP Note 1945137

    Hi
    I need to apply SAP Note - 1945137 in my SAP system,
    But i need steps to apply the same as while implementing
    the note from SNOTE tcode - i am getting the error message - class - “CL_FWTC_SECTIONCODE"
    does not exist and the note doesn't gets implemented,
    Request to please help in getting this issue resolved,
    Thanks in advance ,
    Mansi

    Hi Mansi,
    1727705 - BADI for India
    Above SAP note creates the class CL_FWTC_SECTIONCODE.
    From what i have understood is you are trying to implement the note 1945137 without implementing its prerequisites. Please implement the prerequisites and then try to implement your note.
    Regards.

  • List of SAP Notes - 2010

    Hai.
    Need list of SAP Notes for this year for India Payroll
    Edited by: ECCHCM on Aug 9, 2010 1:19 PM

    Hi ECC,
    hope u r doing good.
    There are some SAP data aggregators which u can use to get all the latest Releases, Notes, Updates, HRSP's.
    for eg : http://www.sd-solutions.com/SAP%20HR%20HRSP%20Update.html
    which u can subscirbe for free for samples, chk it once,
    hope its useful for you.
    Regards
    Rohit.S

  • How to apply SAP Notes

    I need to apply SAP notes for Object TRINT_APPEND_COMM
    How to apply SAP Notes? pls guide

    Hello,
    - Transaction SNOTE;
    - click on the box "SAP NOTE download";
    - enter the note number;
    - after the download, the note will appear in the list below; if the note has a blue arrow as a mark, then it is applyable;
    - double click on that arrow;
    - follow the steps on the screen (which will guide you thru the process, creating a Change Request and so on);
    that's it
    EDIT: i forgot you must be allowed to apply notes, e.g. you should be a thrusted and authorized user.
    Edited by: Matteo Montalto on Nov 3, 2009 11:55 AM

  • Implementing SAP Note query

    Hello,
    My query is  , i need to implement SAP Note 1232490. The highest support package applied in my system is SAPKB46C55.
    This note is part of support pack SAPKB46C59. Can i apply this note now directly or should i apply SAPKB46C56,SAPKB46C57,SAPKB46C58,SAPKB46C59 ?
    If i apply directly,what about if any dependencies exist for that ?how to check the dependencies ?
    Our SAP Version -- 4.6C
    Regards,
    Chaitanya.

    i have one more query.
    for SAP Note : 1449574
    it is written Valid Releases SAP_APPL 46C to higher releases.
    But it is also written in SAP note that, this note comes as part of support pack for minimum 500 release.
    can i apply this in R/3 4.6C ??
    please go through the note pdf and please clear my doubt.
    Regards,
    Chaitanya.

  • Clarification on Canada Year End SAP Note : 1658938 and 1662043

    Dear All ,
    We are currently doing yearend SAP note updates for Canada and need clarification on Canada Year End SAP Note : 1658938 and 1662043 .
    SAP Note : 1658938 is with yearend delta transports which needs to be applied ,but it is mentioned that we need to apply all Year End related notes released on or before December 15th before applying the Delta transports.
    My query is that Note 1662043 released on 12/12/2011 whether this needs to be applied before or after applying delta transports mentioned in 1658938
    Pls help us on this .
    Thanks
    Muthuraj

    Hello Muthuraj,
    You need to apply note 1662043 the note before applying the delta transport.
    I hope it clarifies.
    With Regards,
    S.Karthik

  • Need SAP Note Explanation

    Hi Experts,
    While up grading company db from SAP 8.8 to 9.0 PL10. I got 4 warning messages. I am having little confusion in two messages (SAP Notes: 1729457 and 1934378).
    1) SAP Note 1729457 tells about inventory tracking. Need explanation how it impacts on stock and accounts (if we do/don't reconsile). And what is the      role of consultant here in this stage.
    2) SAP Note 1934378 tells about Fixed Asset. But there is nothing like fixed asset in company db nor depreciation. Please let me know what is role of consultant in this stage.
    With Regards

    Hi,
    1.  SAP Note 1729457
    Reason:
    The inventory taking process is changed in SAP Business One 9.0, and therefore the in-process inventory tracking records in SAP Business One 8.82 or earlier cannot be upgraded to SAP Business One 9.0 or later. When ongoing inventory tracking is identified, a warning message appears to warn you against potential loss of data and propose to finalize the counting prior to upgrade.
    2. SAP Note 1934378
    Reason:
    If the warning message "Transaction created by the SAP Business One Fixed Asset AddOn for the current fiscal year have been detected” is displayed, it means that in company database, transaction actions are detected which need to be reversed according to the documentation prior to the upgrade.
    This is general note for customer. In this case it may not be applicable for your upgrade.
    Hope helpful.
    Thanks & Regards,
    Nagarajan

  • SAP Note clarification

    Hello Guys
    I came through a SAP note that, in extended classic scenaio 'do not have the need to create SAP MM Purchase Requisition or Stock Reservation from the SAP SRM Shopping Cart''
    Please let me know why.
    Thanks in Advance.

    Hello,
    With Extended Classic Scenario, follow-on document for a Shopping Cart is always a Purchase Order.
    This PO is first created in SRM, then replicated to the backend system. Reason why PO can be modified only in SRM system: you cannot edit corresponding PO in MM.
    With Classic Scenario, follow-on document for a Shopping Cart can be:
    - a Reservation,
    - or a Purchase request,
    - or a Purchase Order.
    Those three kind of purchasing documents are always created in the backend system where you can modify them.
    Regards.
    Laurent.

Maybe you are looking for

  • Dynamic configuration not fil in reused OM in NW BPM

    Hi, I'm having problem in operation mapping that i re-used in nw bpm. In my scenerio in the operation mapping, a UDF writes on "TServerLocation" and in the next step of BPM, i have receiver determination rule which read from "TServerLocation" variabl

  • Bridge stops responding to Wacom pen clicks in Windows 8

    When I use Adobe Bridge with the Wacom pen (Intuos 5) the first one or two clicks work but then the program stops responding to any pen clicks until I move the mouse or touch the touchpad, and then all the unresponsive clicks are played back at once.

  • How do i replace an asset with a newer version?

    let's say i have an asset which is a Photoshop file, filename "v1". i want to replace the asset with a newer version of the Photoshop file, filename "v2". how do i replace the "v1" asset with the "v2" asset, so that all instances of "v1" in the proje

  • Changing to manuel syncing

    The directions say to click the ipod symbol in the left pane, etc. to change to manuel syncing after connecting your ipod. Doesn't syncing start right away and won't stuff start getting erased from my ipod if I've cleaned up my itunes and folders? Th

  • Set variable via Javascript

    I got a long string (length exceeds 32512) from Javascript, and want to pass the sting to a variable to a item called P_SQL I use *$x("P_SQL").value* in javascript to set the value, but my process couldn't get the value before I submit, however, when