Need Clarification On Unicode and Upgrade-ECC6.0

Dear All,
I need some clarification unicode and upgrade . It would be great help if you give your time .
We had 2 code pages - 1100,1401 in 4.6B system. We had languages - FR,EN,ES,PT and PL. The system has been upgraded to ECC6.0 non-unicode now.
Now in I18N->System configuration (RSCPINST), only EN is listed. SPUMG asked for activation of I18N to proceed. When the I18N activation was done, it has knocked out the code page 1401 from TCPDB table.
Is this normal?
But, the code pages 1401 is shown as consistent in SCP transaction.
The system setting has changed to Single code page. Will this affect unicode migration? How did the additonal code page 1401 which was in 4.6B get knocked out
now? How did the languages ES,FR,PT, IT and PL which were in 4.6B get knocked out of RCPINST?
We are manually filling the vocabulary since SPUMG is not showing Scanning tabs. The language key in vocabulary is not completely set. The reprocess logs are not completely green. Will this allow unicode migration now? Can we start unicode migration even with this status.
Regards,
Santosh
Edited by: santosh suryavanshi on Nov 18, 2010 11:11 PM
Edited by: santosh suryavanshi on Nov 18, 2010 11:11 PM

Hi Santosh,
SAP ECC 6.0 is not supported with MDMP. This is the reason for the behaviour in RSCPINST.
The standard way for an upgrade based on start release 4.6B with MDMP would be TU&UC (see SAP note 959698).
Do you follow this procedure ?
Best regards,
Nils Buerckel
SAP AG

Similar Messages

Need Clarification on sga_target and sga_max_size

HI,
I need some clarification in SGA_TARGET and SGA_MAX_SIZE.
I have the parameter like below.
SGA_MAX_SIZE=10G
SGA_TARGET=9G
And I spread the 9G to all components like (DB_CACHE,SHARE_POOL etc.,).
My doubt, Incase db need the memory more than 9GB, Whether it automatically take the extra 1G from sga_max_size
or we have to change the sga_target to 10G.

Unless and untill, we set the sga_taget=10G, The extra 1G(from sga_max_size) is not used.
Am i correct?No - its wrong. Any change in the value of SGA_TARGET affects only the sizes of the auto-tuned components. If you increases its value then increased memory will be distributed in only among the components controlled. So, yes 1GB will be used, because have sga_max_size=10G. If you decrease the value then reduced memory is taken back by the auto-tuning policy from one or more of the auto-tuned components.
If SGA_MAX_SIZE is greater than SGA_TARGET, you can increase SGA_TARGET without restarting the instance. Otherwise, you'd need to shutdown and restart the instance if you wanted to increase SGA_TARGET.
Regards
Girish Sharma

Need help choosing models and upgrades

Hi guys,
Basically I am stuck on a air few things with deciding what models along with upgrades to get. I am stuck between getting the MBP 15 inch 2.6GHz or the Retina 15 inch 2.3GHz. For starters I would say I want to use the MBP for general stuff like office and more complex programs like SSPS, surfing the net downloading movies and music and playing games like Rome total War amongst many other games etc. However, I think I have read the Retina display does not even work with all games?
Due to the relative low price I'm sure I will upgrade to 16 GB worth of RAM If get the Retina MBP as you can't upgrade them further down the line (*****). I beleive with the Retina MBP there is no disk drive, so i can't directly insert DVD's or Burn files onto disks etc, but this can be overcome by buying the Apple USB Super Drive, am I correct?
The Retina display only has 256 GB flash storage and that is kinda of low, will it more then enough for what I want to use the MBP for? What would that flash storage not be enough for?
If I get the normal 15 inch 2.6Hz MBP then I will upgrade the screen Hi-res glossy widescreen display as I like to play games and watch movies. Is it worth upgrading the hardrive the improve seed, efficientcy and power performance?
Overall what model would you say best suites my needs thanks?

Actually I have been doing further research and I personally would either go with the 2.6GHz NON RETINA MBP or cough up the cash and go all out on a 2.6GHz RETINA MBP and upgrade the RAM to 16GB and upgrade to 768GB Flash storage, I am a student as well so will get a discount which will help.
My fears are that if I get the Retina model I will not be able to upgrade it even further, I want to keep the computer for at least a good 5 years, during those 5 to 8 years will the current upgrades be enough to keep up with the top games and programs etc? Also I have read that repairing the Retina display model is very diffcult and it can malfunction commonly, so I am guessing I should get apple care on top of it just to be sure with this particular model?
I am assuming that they they will bring out the new models out next year and all the chinks and bugs of the current Retina model will be fixed so to speak, of which I have read there is a few... Would it be worth buying the NON RETINA MBP and then selling and upgrading to an improved RETINA MBP model next year?
Finally if i back up my files on a hardrive would I have to use the USP SUPER DRIVE to install files onto the RETINA MBP or can i directly do this without the USP SUPERDRIVE?
Thanks

Please guide me how to install and upgrade ECC6.0 PI7.0 to PI7.1

SAP Guru's
Please help me as i am confused about PI7.1.
In ECC6.0 SAP PI7.0 server is builtin and no need to install PI seperately like XI3.0 but i want to know how do i upgrade that ECC6.0 PI7.0 builtin server to PI7.1, what are the steps i need to follow.
Is there any other specific DVD for PI7.1 installation or upgrading.
Can i update ECC6.0 PI7.0 with EHP1 for SAP NetWeaver Composition Environment 7.1 - Preview Version, If yes then how as i download this from sdn.
Finally can somebody also tell me from where i will get the PI7.1 IDES dvd or software except sdn as it is no more avaliable in SDN now.

Hi
All information you need abt upgrade is given here.. .check these links
http://service.sap.com/instguidesNWPI71
http://service.sap.com/instguidesNW
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/8085e299-718c-2a10-de94-928f62b763ce
https://websmp102.sap-ag.de/instguidesNWPI71
Regards
Vishnu

Need clarification on Solaris 10 upgrade for E Business suite application

Hi All,
Server details :
(1)Database tier : Sun Solaris 8 - 64 Bit
(2)Application tier ( E Business suite application services ): Sun Solaris 8 - 64 Bit
(3)Application tier ( E Business suite External tier - DMZ configuration ) : Sun Solaris 8 - 64 Bit
(4)10gAS and discoverer : Sun Solaris 8 - 64 Bit
We are planning to upgrade the Database tier (1) and Application tier (2) to Sun solaris 10 and leave the Application tier {
External - DMZ configuration } ( 3) and 10gAS and discoverer ( 4 ) with Sun
solaris 8 .
Please let us know if we will be having issues if we perform the OS upgrade in such a way.
Thanks & Regards,
Rakesh

Rakesh,
There should be no issues with this upgrade path. Just make sure you relink all binaries after an OS Upgrade to ensure that everything is working as expected.
- Take a backup of the application/database
- Upgrade the OS
- Relink all binaries
- Start up the application/database
- Take another backup once you confirm that everything works properly
Note: 356878.1 - How to relink the whole Applications 11i Installation
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=356878.1
Note: 131321.1 - How to Relink Oracle Database Software on UNIX
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=131321.1
Note: 407055.1 - Process To Upgrade the Operating System and Oracle Database Server
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=407055.1
Regards,
Hussein

Need clarification on SATA and PC3200

First of all thanks to all who replied to my first question, I robbed a 3.5 drive out of an old computer and will use it to load driver then remove it. Or I may copy those drivers to cd and see what happens. Is it possible to do this and not have to install a floppy at all? My main question is when I install the Sata hard drive on a brand new system will it work for me to install the OS (win xp) then install the drivers? Whats with using either promise or intel SATA controller? Also should I expect a problem using OCZ pc3200 dual channel ram on the first startup? Sorry to be so dumb but I cant find this info on the net in any detail and I really need this to go smoothly my first time. Here is a rundown on what I am putting together:
Full tower ATX case, loaded with 5 fans
420 watt PS with dual fans
MSI neo FIS2R
P4 3Ghz 800fsb
MSI ti4800se 128mb ddr
Seagate 80GB SATA
Lite on 16x dvd rom
logitech wireless optical moue and keyboard
Win XP oem full version
OCZ pc3200 1GB dual channel copper heat spreader
ancient 3.5" floppy drive circa early 90's (will be removed)
Thank you again for your help.

Copying the drivers on the Windows CD will not be suffient i'm afraid. My best guess is install the driver from an old floppy drive and afterwards you can remove it and disable the FDC controller in your BIOS.
As for the dual channel DDR setup, i didn't experience any problems, so i don't think you will get any either.
Last, the promise S-ATA/ATA controller is only for expansion. I've tested the speed of both controllers (ICH5R and the promise) and didn't find any shocking differences.

Needs Clarification Regarding Segments and Datafiles

Hi,
I want clarification regarding Segments, Datafiles and extents.
As we know that A segment is made of one or more extents and extents are composed of one or more datablocks in the HD.
Since all data are store in Datafiles which are composed of extents and datablocks. I want to know weather a table(Segment) can span to multiple datafiles or in a sigle datafile.
Regards,
D.Abbasi

And an easy way to check it by yourself :
SQL> create tablespace abbasi_tbs
2 datafile 'E:\ORADATA\DEMO111P\abbasi_01.dbf' size 1m autoextend off,
3 'E:\ORADATA\DEMO111P\abbasi_02.dbf' size 1m autoextend off;
Tablespace created.
SQL> create table abbasi_tbl (id number)
2 tablespace abbasi_tbs;
Table created.
SQL> insert into abbasi_tbl
2 select rownum as rn
3 from dual
4 connect by level <=10000;
10000 rows created.
SQL> commit;
Commit complete.
SQL> select distinct file_id
2 from dba_extents
3 where segment_name ='ABBASI_TBL';
 FILE_ID
 6
 7
or...
SQL> select distinct DBMS_ROWID.ROWID_RELATIVE_FNO(rowid)
2 from abbasi_tbl;
DBMS_ROWID.ROWID_RELATIVE_FNO(ROWID)
 6
 7
SQL> select file_name from dba_data_files where file_id in (6,7);
FILE_NAME
E:\ORADATA\DEMO111P\ABBASI_01.DBF
E:\ORADATA\DEMO111P\ABBASI_02.DBF
SQL>Nicolas.
added the ROWID function usage
Edited by: N. Gasparotto on Jun 21, 2009 11:02 AM

Needed clarification on RWRKBENCH and CACHE

Hi,
 I'm new to SAP-XI, Ihave some doubts regarding runtime work bench and cache refreshing
 1.what is difference between complete cache refresh and delta cache refresh in SXI_CACHE transaction.If delta cache refresh is choosen then which components cache will be refreshed?
2.In which case we have to go for complete cache or delta cache refresh ?
3.what is difference between monitoring on RUNTIME WORK BENCH & SXMB_MONI?
 Plz if any body knows anwers to this questions kindly provide explanations.
Good answers will be rewarded.
 Regards,
 Monica.

Hi Monica,
1.what is difference between complete cache refresh and delta cache refresh in SXI_CACHE transaction.If delta cache refresh is choosen then which components cache will be refreshed?
1.Delta Cache Refresh: Any new objects that have been created/modified during the design/configuration activities are inserted into the temporary database tables when we use delta cache refresh option.
2.Full Cache Refresh: All entries in temporary cache tables are deleted and a background program for inserting the complete information about all the design/configuration objects.
2.In which case we have to go for complete cache or delta cache refresh ?
check this
/people/sravya.talanki2/blog/2005/12/02/sxicache--ripped-off
How to handle cache
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/1a69ea11-0d01-0010-fa80-b47a79301290
SXI_CACHE
/people/sravya.talanki2/blog/2005/12/02/sxicache--ripped-off%3Fpage%3Dlast
3.what is difference between monitoring on RUNTIME WORK BENCH & SXMB_MONI?
In RWB we monitor messages whic goes via Adapter Engine.. i.e we monitor messages which r in JAVA stack
In SXMB_MONI we monitor messages of Integartion Engine i.e messages of ABAP stack!!
Hope u r now clear!!!
regards
biplab
Use a Good Subject Line, One Question Per Posting - Award Points
Message was edited by:
 biplab das

Applications and Upgrade

Question does anybody know why do we need to create applications and upgrade applications in financial management?
Thanks

Hanson,
Now that EPMA has become a part of the EPM suite, you have two options for creating HFM applications: (1) Create an application in "classic" mode, which does not involve EPMA in any way or (2) create an application from within EPMA and then deploy it to HFM. The upgrade option allows you to take an application you have created in "classic" mode and import it into the EPMA application library. During the upgrade process, the metadata in the classic HFM application will be added to EPMA's dimension library. Hope this helps!
Best Regards,
Bobby

Migration of BW system to New Hardware and Upgrade to NW04s

Hi,
I'm not sure this is the forum for this post but here goes...
We have recently started a project to migrate our current BW3.5 system to new hardware (HP Superdome) and then upgrade to NetWeaver 2004s.
To do this, we've taken a copy of our current Dev 3.5 system and moved it to the new hardware and will unicode and upgrade to NW04s. Once this is complete, we plan to install NEW instances of QA and Prod with NW04s. We will TRANSPORT all our configuration and reload all the providers in QA and Prod. This will be a MASSIVE task as we have hundreds of infoproviders. Additionally, I'm concerned we will not pick objects currently in 3.5 Prod system (e.g. custom queries/workbooks, infopkgs, process chains, variables, etc.) but not in current 3.5 Dev system.
My question is this - can we instead take copies of the current QA and Prod (3.5) systems and migrate, unicode, and upgrade in the new Superdome hardware. Per Basis, this is NOT possible due to the size of the current systems - approx 2.5 Terabytes. But maybe half of the database is consumed by old PSA's, unused providers, etc. If we were to clean up our current system and do a database reorg to reduce the database size, is it possible to do a system copy (Dev to Dev, QA to QA, Prod to Prod) --> any help/insight is much appreciated.
Thanks,
Senthil

I had this experience in my previous project and i wanna share a with you. we have migrated our total bw landscape from alfa servers to HP superdome servers.
we took all the copies of all the boxes( dev,QA,PRO) and migrate to superdome and upgrade to NW04. but in your case you are not taking copies QA and PRODUCTION. This is not realistic scenario. you got to move all the objects and configuration from dev to respective systems and load the data in the production.
so you have to take all the copies of all the boxes and migrate to superdome and upgrage to NE04, is the right way of doing.

What's the best solution Unicode Conversion and Upgrade on AS 400

Hi Guys,
We have a R/3 4.6C system on AS400 server. Within this year, we' like to change hardware and DB vendor (Oracle), in the meantime we also need to perform the UC and upgrade to ECC6.0.
What 's the best scenario? we have below suggestions.
1
Step1 - Heterogeneous migration and perform UC to new server and DB in one migration (export / import)
Step2 - Upgrade ECC6.0 Unicode
(not sure about this solution, is Unicode conversion to 4.6C without upgrade possible?????)
2
Step1 - Heterogeneous migration to new server and DB
Step2 - UC&UP
3
Step 1 - Heterogeneous migration to new server and DB
Step 2 - Upgrade to ECC non-unicode
Step3 - Unicode conversion to ECC unicode
????? which is better? 2 big question
- is Unicode conversion to 4.6C without upgrade possible?????)
- what's the difference between UC&UP and upgrade first and perform UC later, which is better?
Thanks very much
Lin
Edited by: ye zhulin on Mar 8, 2010 9:53 AM

Hi Lin,
I assume you have an EBCDIC database at the moment.
Point 1 is not possible, since 4.6C is not supported with Unicode.
The difference between CU&UC and a separate Upgrade and a later Unicode conversion is that CU&UC is done in one downtime. However you need to evaluate whether this is possible with your downtime requirements.
My recommendation would be to do the Migration and after that the CU&UC approach (if this is possible in a feasible downtime window - this is highly dependent on your system size / downtime requs / hardware capabilities).
Best regards,
Nils Buerckel
SAP AG
Edited by: Nils Buerckel on Mar 8, 2010 10:34 AM

I upgraded my iBook G4 from 384MBytes to 640Mbytes and upgraded from Tiger to Leopard. After a few weeks the HDD failed. New Leopard install reports: "insufficient memory". I need Tiger install disks so I can install

I upgraded my iBook G4 from 384MBytes to 640Mbytes and upgraded from Tiger to Leopard.
After a few weeks the HDD failed. I bought a new disk, installed it and trued to install Leopard, but the install fails reporting "insufficient memory".
I assume the installation requires more memory than the OS actually needs to be able to run.
I need Tiger install CD/DVD so I can install Tiger first and then upgrade to Leopard.

Call Apple Customer Support 1-800-767-2775, provide the Serial Number and specifications of the Mac, and for a reasonable fee, they will supply a replacement set of system discs (if available).
The discs will be for the original version of the OS that was pre-installed when the Mac was manufactured.
You need much more RAM than that.
Leopard system requirements:
http://support.apple.com/kb/SP517

I have a mac book pro with Boot Camp that also runs windows. I upgraded to Lion and somehow it crashes the mac side peridoically. I am told I need to "clean" it and reinstall lion using the recovery drive. will that delete the windows partition too??

I have a mac book pro with Boot Camp that also runs windows. I upgraded to Lion and now the mac side crashes/freezes periodically, especially iphoto. I am told by the genius' that I probably need to "clean" it and reinstall lion using the "recovery drive" which resets everything back to default and reinstalls the lion operating system. My question is will this also delete the "windows" partition drive and all that data too. If so that will be a huge pain in the ___ to back up and reinstall boot camp and windows. I want to shoot the lion.

There is no system like Acronis for the Mac platform. You can try using the buiilt in Disk Utility to create an Image of the complete Mac drive but I have found that this does not work very well as on tryiing to restore it gives errors sometimes.
You can use SuperDuper or Carbon Copy Cloner to create a bootable Clone of your system partition. But that is only for the System partition and not the complete drive.
If you use Boot Camp to install Windows on your Mac neither of those two programs will clone the Windows side.
Neither will Disk utility as Mac's can not create or write to a NTFS partition. So some other program is need for that.

I had to upgrade from ios7 to ios8 but it needed more storage than i had so i backed up my phone to my computer then deleted the content on my phone and upgraded to ios8. i have not connect my phone and computer since. how do i get my content back?

i had to upgrade from ios7 to ios8 but it needed more storage i had so i backed up my phone to my computer then deleted the content on my phone and upgraded to ios8. i have not connect my phone and computer since. how do i get my content back?

Restore the backup from your computer

I want to upgrade my MacBook Pro 5,2 to Lion, but specs says i need intel core 3 and i have intel core 2, there will be a problem? my computer will run slow? I will need to reinstall my programs again?

I want to upgrade my MacBook Pro 5,2 to Lion, but specs says i need intel core 3 and i have intel core 2, there will be a problem? my computer will run slow? I will need to reinstall my programs again?
Hardware Overview:
Model Name:          MacBook Pro
Model Identifier:          MacBookPro5,2
Processor Name:          Intel Core 2 Duo
Processor Speed:          2.8 GHz
Number Of Processors:          1
Total Number Of Cores:          2
L2 Cache:          6 MB
Memory:          8 GB
Bus Speed:          1.07 GHz
Boot ROM Version:          MBP52.008E.B05
SMC Version (system):          1.42f4
Sudden Motion Sensor:
State:          Enabled

Check to make sure your applications are compatible. PowerPC applications are no longer supported after 10.6.
Application Compatibility
Applications Compatibility (2)

Need Clarification On Unicode and Upgrade-ECC6.0

Similar Messages

Maybe you are looking for