Need Clarification required for Shipping Type Fields in Transportation

HI
I am New to transportation module , i come to know that shipping document is controlled by shipping Type if i am wrong correct me ?
when i click the shipping Type i have seen so many fields in that few fields i didn't understand few field which i mentioned below
Service Level , Process control , Leg Indicator, adopt route , Determine Leg , Shipping Type Preliminary leg and sub.leg Shipping point
I know may be it is a basic question please don't lock the thread and also i searched in the Google
Difference between stage and leg in shipping & transportation?
https://wiki.sdn.sap.com/wiki/display/ERPLO/Transportation354
I tried to understand by using F1 functionality but i couldn't able to understand clearly .Can anyone guide me how it is useful in a real time scenarios and where and how it is impact
Regards,
Prasanna

Service Level - You can differentiate the type of shipment like Load, General Cargo, Express Cargo etc.,
Process Control - Just press F1 and read "Examples"
Leg Indicator - If the cargo goes directly from origin to destination with one shipment document, then you can assign Direct Leg. If multiple transportation is involved and in each and every stage, if you want to generate shipment document, then you have to assign Preliminary Leg, Main Leg and Subsequent leg
Adopt route - Press F1
Determine legs - Press F1 and go through Explanation of Leg Determination Procedure as it is very difficult to explain
Long time back, I have handled this and hence, not able to give examples against each. Will think of and update in case anything comes to my mind.
G. Lakshmipathi

Similar Messages

Shipping type field in VL01

Hi all,
Our Client is using Ztransaction for Delivery & Shipment., where VL01 was called for BDC. Now the requirement is to capture Shipping type field in the same. But the field Ship. type is not found in VL01 though it is appearing in LIKP.
If I am re-recording BDC through VL01n, I am facing problem in Actual GI date.
Please suggest any solution if available.
Thanks & Regards
Gurunadh

hi,
In VL02n, go to - Header - Shipment, then u will see shipping type at the bottom.
Reward points.
chan

Transfer Requirement for Movement Type 262 (Cancel With Ref to Reservation)

Hi Experts,
it is possible to configure the system to create a Transfer requirement for movement type 262 (Cancel With Reference to reservation) ?
When i execute a movement type 262 (Cancel with reference to Order), the system creates a Transfer Requirement, i can process it in transaction LB12. Now i am using the movement type 262 to Reservation, but the system does not create a transfer Requirement.
I am using SAP ECC 6.0.
Thanks in advance,
Alejandro López.

Hi Alejandro,
Can you clarify what process you are performing by this comment? .. "_Now i am using the movement type 262 to Reservation"_.
As per standard process TR (transfer requirement) creation takes place as per the setting in IM-WM interface. Please check in Tcode OMLR, if TR create field is having "X" for the warehouse and reference movement type record. Normally whenever any material document gets posted in IM, MM-WM interface provide the decisions about which WM movement type to pick for warehouse and data about TR , PCN and TO creation.
Hope this will help.
Regards,
Sudhir

Transfer Requirement for Movement Type 262 to Reservation

Hi Experts,
it is possible to configure the system to create a Transfer requirement for movement type 262 to reservation?
When i execute a movement type 262 to Order, the system creates a Transfer Requirement, i can process it in transaction LB12. Now i am using the movement type 262 to Reservation, but the system does not create a transfer Requirement.
I am using SAP ECC 6.0.
Thanks in advance,
Alejandro López.
Edited by: Alejandro López on Feb 28, 2011 1:55 PM

Hi Alejandro,
Can you clarify what process you are performing by this comment? .. "_Now i am using the movement type 262 to Reservation"_.
As per standard process TR (transfer requirement) creation takes place as per the setting in IM-WM interface. Please check in Tcode OMLR, if TR create field is having "X" for the warehouse and reference movement type record. Normally whenever any material document gets posted in IM, MM-WM interface provide the decisions about which WM movement type to pick for warehouse and data about TR , PCN and TO creation.
Hope this will help.
Regards,
Sudhir

HT201209 How to get an itunes gift card code, no need to wait for shipping

Good day to all,
I want to get an itunes gift card just to download whatsapp on my iphone 3gs. I have my credit card but the billing address is in Haiti, unfortunately Haiti is not in your list of countries. How can I get itunes gift card code immediately in order to download that application? No need to wait for shipping, just want to have the code to add it to my apple account.
If you have a better solution, it's welcome.
Thank you in advance for your reply

Sorry, but you can't, if you live in Haiti. As you say yourself, there is no iTunes Store for Haiti and you are not allowed to use the iTunes Store of any other country.
If you live in a country where there is an iTunes Store, check to see if Apple sells physical gift cards in your country and if so purchase and redeem one of those. There is no way to purchase an electronic gift certificate from Apple without a credit card from the country whose iTunes Store you wish to use.
Regards.

Need information about Contract Renewal type field

I have a requirement to get Contract Renewal Type field from CRM. I got to know that the technical field for Contract Renewal Type field is CRMD_CUSTOMER_H-ZZYARE . This field is of data type/length CHAR 1.
I need to get the text for the Renewal Types - for example, Auto Renewal, Periodic Renewal, Manual Renewal. There is no check table or value table or any value stored in domain level for the field ZZYARE..
Can you please let me know from which table and how can I get the text of Contract Renewal Types ?
And Also in which tab of t-code CRMD_ORDER, I can see this field ?
Thanks,
Papiya

Hi,
As the field is a Z field, it must be visible under Customer fields Tab at header level of the contract transaction.
Just check from which table the search help of this field is getting fetched.
Regards,
PP

Table Name For Shipping Type Descriptions

I am looking for the table name that contains the Shipping type descriptions. When I look in the BP Master at the shipping type and look at the data it gives me a numeric value.
THanks Jim Dyer

Hi
Are you sure about this?
Shiiping type is coming from Business partner
It is OCRD table .
Field name - [ShipType]
Try running a simple query
select * from OCRD from query generator or sql .
Thank you
Bishal

Cost Center required for Mvt Type 309

Hi,
In the standard configuration of Mvt Type 309 without special stock indicator, is the cost center field required?

Hi
Cost center is not a mandatory field for movement type 309.
Material to material transfer posting is possible only if both the materials are maintained in the same base unit of measure.
The following additionally applies to material-to-material transfer postings:
They cannot be preplanned via a reservation.
They can only be posted from unrestricted-use stock of the issuing material to
unrestricted-use stock of the receiving material.
They can only be posted in a single step.
Hope it helps
Thanks/Karthik

How much interaction is required for magazine type apps?

Hi All,
I have just had my app rejected for the second time. Apple quoted that it lacks interaction as well as expected qualities such as in app purchases.
After the first rejection i went through and redesigned the app, putting in lots of scrollable text boxes, slide Multi Object states, Pan and zoom, Aspect differences (ie horizontal vs vertical), Web content (twitter feeds, facebook etc), video, navto links from content pages, slideshows, pull out tabs, live links etc. Each article has at least 2-3 of these in it.
My question is how much do i need to put in? I think any more would be doing it just for the sake of it. It is an educational magazine on Marine Aquarium keeping, underwater conservation etc and has a lot of textual information as well as photos. I thought that bu adding a few different interactive features in each article that apple would approve it as it is now a lot more than what you could do as a web based app.
Also quoting that it lacks in app purchases as a reason for rejection? I always thought that this was a developers option, not a requirement. We only have 1 app presently in review and want to know how this goes before committing to more apps. Therefore i chose a single issue license where in app purchases are not allowed. If i had known that this is a requirement for magazine stlye apps, then we wouldnt have gone down this path to start with as the $1000's of dollars for a professional license is not economically viable for a small business....
Has anyone else been through this?
Im happy to share our published folio to anyone for feedback, as at the moment im really not sure what Apple are requiring.
If you have had a magazine type app approved in the App store and can offer any advice, it would be greatly appreciated. Email me your adobe email and i will share the published folio for your opinions.
I appreciate any advice.
Cheers,
Michael

Hi, Michael-
We are experiencing the same response with our first app attempt. The review response was along the lines of 'simple interaction, would not appeal to a wide audience, and better suited as an HTML5 web mobile app (which apple claims they do not approve for the app store; such as mobile apps with a phonegap shell, etc).
After our response referring to this as a multi-publication shell to which we would make additional content available, their reply was opaque stating that apps are not approved due to the number of features and capabilities, but primarily those that provide an in-app experience you could not get anywhere else. I was under the assumption the DPS system was pretty good at offering a rich experience compared to the print world it is modeled after.
I was very excited after testing the capabilities of DPS but now see that regardless of the investments/time you put into these publications apple still has the final word on whether it will be available to the masses in their 'curated' store.
Best of luck to you, let us not give up.

Input Help for TIME type field

I saw below discussion regarding a dropdown for a "TIME" type field.
Re: Time Search Help
It's a resuable component (that Thomas Jung created) and find it very slick.
I just couldn't make it to work. I'm getting a dump when I pressed the dropdown on the "TIME" field.
I was wondering, has anyone used this in conjunction with select-options (WDR_SELECT_OPTIONS) ?
I'm getting a system-dump, "Component usage VALUE_HELP does not exist". I double checked the name that I used on the "USED COMPONENT" tab and it is VALUE_HELP.
During method ADD_SELECTION_FIELD (for IF_WD_SELECT_OPTIONS) I'm using two parameters I_VALUE_HELP_TYPE = 'APPLDEV' and I_VALUE_HELP_ID = 'VALUE_HELP'.
Maybe I'm not using the right parameters ?
Anyway, I would appreciate if anyone could give me directions to correct the problem.Or maybe there is another and better way of having an input help for a "TIME" type field on select-option.
Thanks.
Vic

That is because the TIME is a freely programmed value help and freely programmed value helps are not supported by the Select-Options component. That limited is listed in the online help:
Type of input help specified as type IF_WD_VALUE_HELP_HANDLER.
Note that only ABAP Dictionary-based input help and OVS input help are supported; freely programmable input help is not supported.
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/45/bf07361248003de10000000a11466f/frameset.htm
The reason for this is that the freely programmed value help is accessed via a component usage. The Select-Options however are a separate component. They have no declaration to your components, component usages. Therefore they produce the error that the component usage doesn't exist - which is correct. It doesn't exist in the Select-Options Component.

Reason code required for movement type 122

I am getting the above error and looked up a thread on the forum which applies to my scenario. However there was a mention of defining a text schema and assigning it to the movemnt type. Can someone help me how to do that?
Jai
The thread is as follows:
We are running SRM 550 with Extended Classic scenario. When I attempt to create a return delivery, I get an error message saying: A reason has to be entered for movement type 122. But there is no way to enter the reason, i.e no fields or indicators.
<b>The text schema for return delivery is maintained and assigned to the document type for confirmations -</b> as far as I am aware this is all the config which is necessary to activate the reason for return delivery function. Am I missing something??

Hi Jai
Text Types Menu Path : SPRO -> SAP Implementation Guide → Supplier Relationship Management → SRM Server → Cross- Application Basic Settings -> Text Schema -> Define Text Types
Text Schema: Menu Path : SPRO -> SAP Implementation Guide → Supplier Relationship Management → SRM Server → Cross- Application Basic Settings -> Text Schema -> Define Text Schema
Fixed Values: Menu Path : SPRO ->SAP Implementation Guide → Supplier Relationship Management → SRM Server → Cross- Application Basic Settings -> Text Schema -> Define Fixed Values for Texts
Best regards
Ramki

Need XSLT code for comparing 2 fields and looping the repatitive attirbute filed to destination schema

Need an Custom XSLT code... where i need to compare 2 attribute fields( Name and Start Date) fromInputMessagePart_0 with the 2 fields ( Name and Start Date) from InputMessagePart_1 and need to map the repetitive attribute field ( phoneno) from InputMessagePart_1
to attribute field( PhoneNo of Destination schema.
this will look like this
Source Schema
Destination Schema
InputMessagePart_0                                                 Item
Record
      - Name
-Name
      - StartDate
- StartDate
      - Addres
- PhoneNo
InputMessagePart_1
     -Name
     -StartDate
     -PhoneNo
Final output should look like by
Details
Name
StartDate
PhoneNo
Details
Name
StartDate
PhoneNo
Details
Name
StartDate
PhoneNo
Details
Name
StartDate
PhoneNo
Need urgent assistance
Thank you in advance
BizTalkLearner

could you also post your sample input instance and expected output instance
Please mark the post as answer if this answers your question. If this post is helpful, please vote as helpful by clicking the upward arrow mark next to my reply.

NEED STANDARD INFOOBJECTS FOR STANDARD R3 FIELDS?

HI ALL,
RESBU
BRESWK
BRTWR_R
BSAKZ
EGLKZ
EMNFR
KTWRT
KZKPF
KZKPO
MEPRF
MPROF
NETWR_R
PRDAT
REVNO
STAKO
STAPO
The above are R3 Fields, i have taken it from datasource (2LIS_02_ITM), I Just want to know the standard infoobjects used for the above said fields.
Is there any way to get the standard infoobjects for the above fields?
Please Help.

Hi
1. Goto SE11 of R3 and give RSOSFIELDMAP
2. Click on contents icon of the table and give the R3 fields names against the field
3. Execute it and the table will list out the corresponding info objects and the data source.
Hope it helps
Regards
Sadeesh

Copy data for long type field

hello
I am trying to copy data from one table to another both have long type field.
but facing an error
like
SQL> copy from neo/neo1234@neo99_local insert temp using select * from temp1
Array fetch/bind size is 15. (arraysize is 15)
Will commit when done. (copycommit is 0)
Maximum long size is 80. (long is 80)
CPY-0012: Datatype cannot be copied
thanks

If I recall correctly there's a restriction that prevents you selecting LONG datatypes over a remote connection.But SQL*Plus COPY command should be able to handle LONGs.
Maybe the table has other datatypes not supported by COPY?!

User Exit Or BADi for Ship-to-Party's Transportation Zone F4 Help in VA01

Dear Experts,
I want to change the F4 help of Transportation Zone in Ship-to-Party Address in VA01.
I have to show the possible entries from Z table which is compared by the city of that particular customer.
Explanation:
1. Go to Transaction VA01.
2. Enter the values in first screen and Enter.
3. select the sold to party and ship to party and Enter.
4. Enter any item in item level.
5. Press Display Doc. Header ICON.
6. Go to partners tab.
7. Double click on Ship to party.
8. One Pop up screen will open. (ie. Address from Master Data for Ship-to-Party (Document Header).
9. Press F4 help for the field Transportation Zone. (It will show the possible entries from the table TZONE (All records).
10. I want to show the possible entries only for that particular city.(For a particular city there may be more than one transportation zone. I will maintain these records in Z table ).
I have tried all user exit from the program MV45AFZZ and ADDRESS_SUBSCREEN BAdI. But I could not get the solution.
Please help help me to do this.
Thanks,
Maruthamuthu

Hi Sandeep,
These are the user exits will trigger in va01 .
SDTRM001 Reschedule schedule lines without a new ATP check
V45A0001 Determine alternative materials for product selection
V45A0002 Predefine sold-to party in sales document
V45A0003 Collector for customer function modulpool MV45A
V45A0004 Copy packing proposal
V45E0001 Update the purchase order from the sales order
V45E0002 Data transfer in procurement elements (PRreq., assembly)
V45L0001 SD component supplier processing (customer enhancements)
V45P0001 SD customer function for cross-company code sales
V45S0001 Update sales document from configuration
V45S0003 MRP-relevance for incomplete configuration
V45S0004 Effectivity type in sales order
V45W0001 SD Service Management: Forward Contract Data to Item
V46H0001 SD Customer functions for resource-related billing
V60F0001 SD Billing plan (customer enhancement) diff. to billing plan
Please check this and post .
Regards,
Madhu.

Need Clarification required for Shipping Type Fields in Transportation

Similar Messages

Maybe you are looking for