Need Clarification very urgent !!!!!!!!!
Hi Experts
I have a scenerio, where I have to send 3 Master Data Files from our BW systerm to other BW System. Can any one let me know how can we send these in nw04s.Is there any new technologies available for this . Iam planning on Info Spoke to send these files.Is that the correct way in 04s.? Do I need to involve in the set up of Link between our BW system to Other BW system / Does BASIS guys will take care of that ?
1) In this Master Data files one of the file is Company Master File. But in the Functional Spec they have given me a separate spread sheet (with csv data). which contains the Operating Code for the Company Codes. How can I combine this in the file that I want to send it to other BW system, I mean this Flat file data and Master Data ( 0COMP_CODE) data in one file ?
2)Another File is Material Group Master File. We need to send out Local Material Group Descriptions Including Material group (Material Group Master) to Other BW System as a CSV file. For that Iam planning to use 0MATERIAL_ATTR & TEXT. (Are these data Sources are the exact data sources ?)But when I look at the ECC Data Sources I have found different data sources for Material Groups like 0MATL_GRP_TEXT1,0MATL_GRP_TEXT2...etc...TILL 5. How can I include thise in the Material Group Master File that iam sending in to other BW system.
3) Third one is Vendor Master Attributes and Texts, where I found every thing except Geo Graphic Location, Height , Longitude, Latitude Data Source Id of Geo Location. ( Which Table /Data Source will provide these details ?) I checked in LFA1, LFM1, LFB1 etc....
Pelase take the time and try to answer my questions in breif...
Thanks and regards
If you are sending data from one BW to another BW system, you can try datamart datasources. Create export DS on top of your master data infoobject in the source system, connect the source BW system as a source system to the target and do a normal ETL config for these datasources on the target. Basis can setup the source system connection.
1 - You can load this file into a Z table (create it), and in the infospoke (if you are using one) you can explore if the BADI allows you to fill the extra fields by reading from this Z table. This is assuming you are not using datamart. If you are, you can write the same code on the source system extractor user-exit.
3 - This data is stored on BW (do not think it comes from ECC so you can't find it there). I can check and post the table to find this info later; you can go to the infoobject definition and go to Bex Tab (2nd one) and check the lower part of the screen - geographic master data is managed there. I am not sure whether you need to check it for customer no (probably not) infoobject or for some field like Zipcode etc.
Similar Messages
-
Please i need help very urgent !!! after deleting my exchange account because the company changed the password , I lost 150 200 contacts and i need to get them back very soon ! i never backed up on itunes ..please help
No. The contacts are "owned" by the Exchange server.
The Exchange server is owned by the company.
Everything on the Exchange server is owned by the company.
If you quit or were terminated, and your access to the system has been revoked, then there is nothing you and do at this point. Once you deleted the account from your phone, all of the associated data was deleted.
NEVER store personal information on company systems. -
An error has occurred. need help very urgent
An error has occurred.
"You may attempt to sign in again.
If your attempt fails, please contact your System Administrator. "
i am getting above error for only two users in Production envroment. but we dont have access in production, i am unable to replicate same problem in DEV. can u give any suggetion for this problem.
Thanks
Lakshmandid you check for the roles assigned to the 2 users?Without any application access, it is rather difficult, and this is the reason why I suggested to contact somebody who is allowed to connect onto prod env.
Nicolas. -
Need help, MMC tree got deleted, very urgent.
Hi,
My sap MMC tree, got deleted in the server. I have been trying to restore since 2 days and couldnt succeed, please help me.
1) i have uncared the sapmmc.sar from Kernal\NT\I386\MMC\sapmmc.sar file
2) i got about 7 files, in which there is one sapmmc file i have tried to double click it, n check but no go.
3) i also tried to run the Sapstartsrv.exe file and fill in up the values in pop up window. & filled up the following values :-
SID: DEV
NR: 00
StartProfile: (entire start profile path given)
user: devadm
passwd; (given)
- but it says "the account name is invalid or does not exist or the password is invalid for account name specified"/
- no go in both the cases.
Please need help very urgent.
Regards,
Satish.siva,
I am getting same error since 2 days
SID: DEV
NR: 00
Start Profile: (entire start profile path)
User: <hostname>/devadm
passwd: ****
Error:
cannot install service
create service failed:421
The account name is invalid or doesnot exist, or the passwd is invalid for the account name specified.
Edited by: satish c on Jun 4, 2008 11:12 AM -
Hello
HCL Technologies is one of India's leading global IT
services and product engineering companies, providing
value-added, software-led IT solutions and services to
large- and medium-scale organizations.
We need people very urgently with the following skill set.
Compensation is absolutely not an issue for the right candidate.
Position is based in chennai, India.
Should be able to Join by Apr 28, 2003(next week).
Required for a period of 4 months on a contract basis or permanent as desired by the candidate.
Candidates should be excellent designers and should be proficient in
UML.
Position 2 - Core Java, Swing. Experience in Dnd is Preferred.
Role: Guide a team of 6-7 people on Complex java applications and
should be able to design,code, unit test and integrate.
Please Send your resumes to [email protected] along with
your contact numbers.
Pls do not reply to the group, reply to me separately.
Thanks & Regards,
NagendraHi,
I guess you should be a little bit more specific in your questions. Hopefully you did already some research yourself. Last may 2012 I have been visiting the RittmanMead BI Forum. There I had the privilige to attend the following presentation; http://www.rittmanmead.com/files/biforum2012/heljula_security_123.pdf
This should give you a little bit of background.
Feel free to come back with some specific questions after you have tried yourself. One advise upfront. Don't apply security to specific users. Better use the 11g Application Roles
Good Luck,
Daan Bakboord
http://obibb.wordpress.com -
High Contrast Mode (VERY URGENT)
(VERY URGENT...)
Hi all ....
I am developing a Java-Swing based application in Win2K and I need to find out whether the user has switched to the high contrast mode on the fly .... Is there any method that can be called to test the high contrast mode in J2sdk1.4 ??
Also... how do I get the new system font and the new system font size in the high contrast mode ???
Can somebody give me a sulution ??? I need it very urgently ....
Thanks a lot...
Ganesh C.N.I have got the same question for Windows XP. More generally, most of the apple applications (paje, calandar,contact..) interfaces (itune, icloud) and web pages (forum, support..) have a low contraste or colours that are impossible to change.
Any help would be appreciated... -
Need help in Idoc--very urgent.
Hi guys,
i am working on an object where i need to post the data from legacy system to F-27 transaction using Idoc.i hv found two idocs input_idoc_fidcc1 and input_idoc_fidcc2 for posting the data..
Can anyone help in finding the right idoc for triggering the f-27 transaction with the reason...
coz both are perfoming almost the same functionalities...
its very urgent guys..
kindly help me full marks wud be given...
regards
SahilHi,
The function module is related to post the idoc type FIDCPP01
and posts the complete FI document. and as coming to second function module along with Tax you can post item wise with holding tax dataalso. So you choose the required function module based on the data you need to post. If you need not post with holding tax details dont fo for second function modules.
Reward if find useful -
Kernel panics, message saying "You need to restart your computer.Hold down the Power..." I am in the middle of HSC very URGENT please help!! Mac keeps needing to restart!!
I looked in console and its saying that it may be because of Sophos Anti-Virus, i deleted and uninstalled all traces of Sophos but looked in console and this is some of the lines coming up:
26/09/13 10:11:17.945 PM com.apple.launchd: (com.sophos.intercheck[6460]) posix_spawn("/Library/Sophos Anti-Virus/InterCheck.app/Contents/MacOS/InterCheck", ...): No such file or directory
26/09/13 10:11:17.945 PM com.apple.launchd: (com.sophos.autoupdate[6461]) posix_spawn("/Library/Sophos Anti-Virus/SophosAutoUpdate.app/Contents/MacOS/SophosAutoUpdate", ...): No such file or directory
26/09/13 10:11:17.945 PM com.apple.launchd: (com.sophos.notification[6462]) posix_spawn("/Library/Sophos Anti-Virus/SophosAntiVirus.app/Contents/MacOS/SophosAntiVirus", ...): No such file or directory
26/09/13 10:11:17.946 PM com.apple.launchd: (com.sophos.intercheck[6460]) Exited with code: 1
26/09/13 10:11:17.946 PM com.apple.launchd: (com.sophos.intercheck) Throttling respawn: Will start in 10 seconds
26/09/13 10:11:17.946 PM com.apple.launchd: (com.sophos.autoupdate[6461]) Exited with code: 1
26/09/13 10:11:17.946 PM com.apple.launchd: (com.sophos.autoupdate) Throttling respawn: Will start in 10 seconds
26/09/13 10:11:17.946 PM com.apple.launchd: (com.sophos.notification[6462]) Exited with code: 1
26/09/13 10:11:17.946 PM com.apple.launchd: (com.sophos.notification) Throttling respawn: Will start in 10 seconds
26/09/13 10:11:18.291 PM Safari: self <TabContentView: 0x7f8d5dd1aa50>
26/09/13 10:11:22.617 PM Safari: self <TabContentView: 0x7f8d5db7bb00>
26/09/13 10:11:27.866 PM Safari: self <TabContentView: 0x7f8d5c331a70>
26/09/13 10:12:19.939 PM com.apple.launchd.peruser.501: (com.sophos.uiserver[6487]) posix_spawn("/Library/Sophos Anti-Virus/SophosUIServer.app/Contents/MacOS/SophosUIServer", ...): No such file or directory
26/09/13 10:12:19.939 PM com.apple.launchd.peruser.501: (com.sophos.uiserver[6487]) Exited with code: 1
26/09/13 10:12:19.939 PM com.apple.launchd.peruser.501: (com.sophos.uiserver) Throttling respawn: Will start in 10 seconds"
Looked all over computer and cant find anything of Sophos please help very urgent!That was all that there was in the most recent one, how long do you think it could take to fix?
Here is the second most recent:
Wed Sep 25 15:39:39 2013
panic(cpu 0 caller 0xffffff80002c4794): Kernel trap at 0xffffff7f81757965, type 14=page fault, registers:
CR0: 0x0000000080010033, CR2: 0xffffff81acc397fe, CR3: 0x000000001e2b5025, CR4: 0x00000000000606e0
RAX: 0x000000001d31a000, RBX: 0x0000000000000000, RCX: 0x0000000000000000, RDX: 0x0000000000000000
RSP: 0xffffff80b0dbb710, RBP: 0xffffff80b0dbb820, RSI: 0x0000000000000000, RDI: 0x0000000000000001
R8: 0x000000000000000a, R9: 0x0000000000000378, R10: 0x0000000000000128, R11: 0x0000000000000378
R12: 0xffffff800c626400, R13: 0x0000000000000000, R14: 0x0000000000000000, R15: 0xffffff81acc39802
RFL: 0x0000000000010246, RIP: 0xffffff7f81757965, CS: 0x0000000000000008, SS: 0x0000000000000010
CR2: 0xffffff81acc397fe, Error code: 0x0000000000000000, Faulting CPU: 0x0
Backtrace (CPU 0), Frame : Return Address
0xffffff80b0dbb3c0 : 0xffffff8000220792
0xffffff80b0dbb440 : 0xffffff80002c4794
0xffffff80b0dbb5f0 : 0xffffff80002da55d
0xffffff80b0dbb610 : 0xffffff7f81757965
0xffffff80b0dbb820 : 0xffffff7f817667a0
0xffffff80b0dbb840 : 0xffffff7f8173a58e
0xffffff80b0dbb870 : 0xffffff7f8177fb6f
0xffffff80b0dbb8a0 : 0xffffff7f81779632
0xffffff80b0dbb8d0 : 0xffffff7f8177d7d5
0xffffff80b0dbb900 : 0xffffff7f8177c6db
0xffffff80b0dbb9e0 : 0xffffff7f817412b8
0xffffff80b0dbba10 : 0xffffff7f81778684
0xffffff80b0dbba30 : 0xffffff7f817449ce
0xffffff80b0dbbb60 : 0xffffff7f81741a4c
0xffffff80b0dbbbc0 : 0xffffff8000655f3e
0xffffff80b0dbbbe0 : 0xffffff800065681a
0xffffff80b0dbbc40 : 0xffffff8000656fbb
0xffffff80b0dbbd80 : 0xffffff80002a3f08
0xffffff80b0dbbe80 : 0xffffff8000223096
0xffffff80b0dbbeb0 : 0xffffff80002148a9
0xffffff80b0dbbf10 : 0xffffff800021bbd8
0xffffff80b0dbbf70 : 0xffffff80002aef10
0xffffff80b0dbbfb0 : 0xffffff80002daec3
Kernel Extensions in backtrace:
com.apple.driver.AppleIntelHD3000Graphics(7.3.2)[A2328231-E577-32FF-B20F-D08BDC FE9C51]@0xffffff7f81738000->0xffffff7f8179bfff
dependency: com.apple.iokit.IOPCIFamily(2.7)[5C23D598-58B2-3204-BC03-BC3C0F00BD32]@0xffffff 7f80889000
dependency: com.apple.iokit.IONDRVSupport(2.3.4)[7C8672C4-8B0D-3CCF-A79A-23C62E90F895]@0xff ffff7f80d2e000
dependency: com.apple.iokit.IOGraphicsFamily(2.3.4)[D0A1F6BD-E66E-3DD8-9913-A3AB8746F422]@0 xffffff7f80cf5000
BSD process name corresponding to current thread: WindowServer
Mac OS version:
11G63b
Kernel version:
Darwin Kernel Version 11.4.2: Thu Aug 23 16:25:48 PDT 2012; root:xnu-1699.32.7~1/RELEASE_X86_64
Kernel UUID: FF3BB088-60A4-349C-92EA-CA649C698CE5
System model name: MacBookPro8,1 (Mac-94245B3640C91C81)
System uptime in nanoseconds: 1866666823698
last loaded kext at 480357661446: com.apple.filesystems.smbfs 1.7.2 (addr 0xffffff7f80795000, size 241664)
last unloaded kext at 303348424187: com.apple.driver.AppleUSBUHCI 5.1.0 (addr 0xffffff7f80af7000, size 65536)
loaded kexts:
com.sophos.kext.sav 8.0.14
org.virtualbox.kext.VBoxNetAdp 4.2.16
org.virtualbox.kext.VBoxNetFlt 4.2.16
org.virtualbox.kext.VBoxUSB 4.2.16
org.virtualbox.kext.VBoxDrv 4.2.16
com.logmein.driver.LogMeInSoundDriver 1.0.2
com.Greatdy.driver.SystemAudioCapture 1.0.0
com.apple.filesystems.smbfs 1.7.2
com.apple.driver.AppleHWSensor 1.9.5d0
com.apple.driver.AppleMikeyHIDDriver 122
com.apple.iokit.IOBluetoothSerialManager 4.0.8f17
com.apple.driver.AudioAUUC 1.59
com.apple.driver.AppleHDA 2.2.5a5
com.apple.driver.AppleMikeyDriver 2.2.5a5
com.apple.driver.AGPM 100.12.75
com.apple.driver.AppleUpstreamUserClient 3.5.9
com.apple.driver.SMCMotionSensor 3.0.2d6
com.apple.driver.AppleSMCPDRC 5.0.0d8
com.apple.iokit.IOUserEthernet 1.0.0d1
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AudioIPCDriver 1.2.3
com.apple.driver.AppleSMCLMU 2.0.1d2
com.apple.driver.ApplePolicyControl 3.1.33
com.apple.driver.ACPI_SMC_PlatformPlugin 5.0.0d8
com.apple.driver.AppleIntelHD3000Graphics 7.3.2
com.apple.driver.AppleBacklight 170.2.2
com.apple.driver.AppleLPC 1.6.0
com.apple.driver.AppleMCCSControl 1.0.33
com.apple.filesystems.autofs 3.0
com.apple.driver.AppleUSBTCButtons 227.6
com.apple.driver.BroadcomUSBBluetoothHCIController 4.0.8f17
com.apple.driver.AppleUSBTCKeyboard 227.6
com.apple.driver.AppleIRController 312
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 33
com.apple.iokit.SCSITaskUserClient 3.2.1
com.apple.driver.XsanFilter 404
com.apple.iokit.IOAHCISerialATAPI 2.0.3
com.apple.iokit.IOAHCIBlockStorage 2.1.0
com.apple.driver.AppleUSBHub 5.1.0
com.apple.driver.AppleFWOHCI 4.9.0
com.apple.driver.AirPort.Brcm4331 561.7.22
com.apple.driver.AppleSDXC 1.2.2
com.apple.iokit.AppleBCM5701Ethernet 3.2.4b8
com.apple.driver.AppleEFINVRAM 1.6.1
com.apple.driver.AppleSmartBatteryManager 161.0.0
com.apple.driver.AppleAHCIPort 2.3.1
com.apple.driver.AppleUSBEHCI 5.1.0
com.apple.driver.AppleACPIButtons 1.5
com.apple.driver.AppleRTC 1.5
com.apple.driver.AppleHPET 1.7
com.apple.driver.AppleSMBIOS 1.9
com.apple.driver.AppleACPIEC 1.5
com.apple.driver.AppleAPIC 1.6
com.apple.driver.AppleIntelCPUPowerManagementClient 195.0.0
com.apple.nke.applicationfirewall 3.2.30
com.apple.security.quarantine 1.4
com.apple.security.TMSafetyNet 8
com.apple.driver.AppleIntelCPUPowerManagement 195.0.0
com.apple.iokit.IOSerialFamily 10.0.5
com.apple.driver.DspFuncLib 2.2.5a5
com.apple.iokit.IOSurface 80.0.2
com.apple.iokit.IOFireWireIP 2.2.5
com.apple.driver.AppleHDAController 2.2.5a5
com.apple.iokit.IOHDAFamily 2.2.5a5
com.apple.iokit.IOAudioFamily 1.8.6fc18
com.apple.kext.OSvKernDSPLib 1.3
com.apple.driver.AppleGraphicsControl 3.1.33
com.apple.driver.AppleSMC 3.1.3d10
com.apple.driver.IOPlatformPluginLegacy 5.0.0d8
com.apple.driver.AppleSMBusPCI 1.0.10d0
com.apple.driver.AppleBacklightExpert 1.0.4
com.apple.driver.IOPlatformPluginFamily 5.1.1d6
com.apple.iokit.IONDRVSupport 2.3.4
com.apple.driver.AppleSMBusController 1.0.10d0
com.apple.driver.AppleIntelSNBGraphicsFB 7.3.2
com.apple.iokit.IOGraphicsFamily 2.3.4
com.apple.kext.triggers 1.0
com.apple.driver.AppleUSBBluetoothHCIController 4.0.8f17
com.apple.iokit.IOBluetoothFamily 4.0.8f17
com.apple.driver.AppleThunderboltDPInAdapter 1.8.5
com.apple.driver.AppleThunderboltDPAdapterFamily 1.8.5
com.apple.driver.AppleThunderboltPCIDownAdapter 1.2.5
com.apple.driver.AppleUSBMultitouch 230.5
com.apple.iokit.IOUSBHIDDriver 5.0.0
com.apple.driver.AppleUSBMergeNub 5.1.0
com.apple.driver.AppleUSBComposite 5.0.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.2.1
com.apple.iokit.IOBDStorageFamily 1.7
com.apple.iokit.IODVDStorageFamily 1.7.1
com.apple.iokit.IOCDStorageFamily 1.7.1
com.apple.iokit.IOSCSIArchitectureModelFamily 3.2.1
com.apple.driver.AppleThunderboltNHI 1.6.0
com.apple.iokit.IOThunderboltFamily 2.0.3
com.apple.iokit.IOUSBUserClient 5.0.0
com.apple.iokit.IOFireWireFamily 4.4.8
com.apple.iokit.IO80211Family 420.3
com.apple.iokit.IOEthernetAVBController 1.0.1b1
com.apple.iokit.IONetworkingFamily 2.1
com.apple.iokit.IOAHCIFamily 2.0.8
com.apple.iokit.IOUSBFamily 5.1.0
com.apple.driver.AppleEFIRuntime 1.6.1
com.apple.iokit.IOHIDFamily 1.7.1
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 177.11
com.apple.kext.AppleMatch 1.0.0d1
com.apple.driver.DiskImages 331.7
com.apple.iokit.IOStorageFamily 1.7.2
com.apple.driver.AppleKeyStore 28.18
com.apple.driver.AppleACPIPlatform 1.5
com.apple.iokit.IOPCIFamily 2.7
com.apple.iokit.IOACPIFamily 1.4 -
Very urgent help needed in activating a function module
Hello experts.
I had a standard report and i copied into an z report. i need to change some field output , and that field is there in a standard function module.so i copied that fun module into z fun module and stored in a new fun group. Now it is showing the error in the z fun module. include in the fun module is giving the error stating that it is not existing. please help me in coping the standard fun module correctly . please its very urgent.Hi,
You should not copy a Function module alone, as it will have some dependant INLCUDES and global data in TOP include of the function group.
SO if you want the function module copy the entire Function Group into Z function group.
Regards,
Sesh -
Hi every1,
i am in a very bad situation as i am very new to AS3, so i
need some help from any one who can help me out of this.
I have created a FLV Player using FLVPlayback Component
everything is working fine but the only problem is the rewind and
forward button behaves very strange when i test it on web page
residing in a webserver.
In brief i want to say that the rewind and forward control in
the application works alright when i play it in my local machine
but when i take the file to a web sever and play it the controls
behave very strange (when i click on the forward and rewind button
it just takes me to the end of the movie and to the start of the
movie at one shot which should not be the purpose of the rewind and
forward button).
So, somebody please look at my code below and i will be very
thank full to the person who can send me the correct code.
The code for the rewind and forward control is higlighted in
the below code. please help... .very urgent..........
import fl.video.*;
var flvSou:String;
var dynText:String;
myflv.autoPlay = true;
onscreen_play_btn.visible = false;
onscreen_replay_btn.visible = false;
if (myflv.playing) {
onscreen_play_btn.visible = false;
onscreen_replay_btn.visible = false;
//myflv.source = "Call_to_action.flv";
myflv.source = root.loaderInfo.parameters.flvSou;
dynTxt.text = String(root.loaderInfo.parameters.dynText);
slash_txt.text = "/";
myflv.playPauseButton = playPause_btn;
myflv.stopButton = stop_btn;
myflv.muteButton = mute_btn;
myflv.volumeBar = volume_bar;
myflv.volume = .6;
myflv.forwardButton = forward_btn;
myflv.backButton = back_btn;
myflv.seekBar = seek_bar;
myflv.bufferingBar = buffering_bar;
myflv.fullScreenButton = fullscreen_btn;
//========================= Actions for Button Controls
=========================//
//========================= Actions for Play and Pause Button
=========================//
playPause_btn.pause_mc.addEventListener(MouseEvent.CLICK,
clickHandlerPause);
function clickHandlerPause(event:MouseEvent):void {
//trace("clickHandler detected an event of type: " +
event.type);
//trace("the event occurred on: " + event.target.name);
trace("u clicked pause button");
onscreen_play_btn.visible = true;
//myflv.alpha = .5; // uncomment later
playPause_btn.play_mc.addEventListener(MouseEvent.CLICK,
clickHandlerPlay);
function clickHandlerPlay(event:MouseEvent):void {
//trace("clickHandler detected an event of type: " +
event.type);
//trace("the event occurred on: " + event.target.name);
trace("u clicked play button");
onscreen_play_btn.visible = false;
//myflv.alpha = 100; // uncomment later
if (onscreen_replay_btn.visible==true) {
onscreen_replay_btn.visible=false;
//========================= Actions for Play and Pause Button
=========================//
//========================= Actions for FLVPlayback
=========================//
myflv.addEventListener(MouseEvent.CLICK,
clickHandlerPauseFlv);
function clickHandlerPauseFlv(event:MouseEvent):void {
//trace("clickHandler detected an event of type: " +
event.type);
//trace("the event occurred on: " + event.target.name);
trace("u clicked video component button");
trace(myflv.totalTime);
if (myflv.playing==true) {
myflv.pause();
onscreen_play_btn.visible = true;
//myflv.alpha = .5; // uncomment later
} else {
myflv.play();
onscreen_play_btn.visible = false;
onscreen_replay_btn.visible = false;
//myflv.alpha = 100; // uncomment later
//========================= Actions for FLVPlayback
=========================//
//========================= Actions for Fullscreen Button
=========================//
fullscreen_btn.addEventListener(MouseEvent.CLICK,onFullScreenButtonClick);
function onFullScreenButtonClick(event:MouseEvent):void {
stage.displayState = StageDisplayState.FULL_SCREEN;
//or set it to normal like: stage.displayState =
StageDisplayState.NORMAL;
//========================= Actions for Fullscreen Button
=========================//
//========================= Actions for onScreenPlay Button
=========================//
onscreen_play_btn.addEventListener(MouseEvent.CLICK,onScreenPlayButtonClick);
function onScreenPlayButtonClick(event:MouseEvent):void {
trace("working");
if (myflv.playing==true) {
myflv.pause();
} else {
myflv.play();
//myflv.alpha = 100; // uncomment later
onscreen_play_btn.visible = false;
//========================= Actions for onScreenPlay Button
=========================//
//========================= Actions for onScreenReplay Button
=========================//
onscreen_replay_btn.addEventListener(MouseEvent.CLICK,onScreenReplayButtonClick);
function onScreenReplayButtonClick(event:MouseEvent):void {
trace("working");
myflv.play();
//myflv.seek(0);
onscreen_replay_btn.visible = false;
if (onscreen_play_btn.visible==true) {
onscreen_play_btn.visible=false;
//========================= Actions for onScreenReplay Button
=========================//
//========================= Actions for Stop Button
=========================//
stop_btn.addEventListener(MouseEvent.CLICK, StopButtonClick);
function StopButtonClick(event:MouseEvent):void {
myflv.seek(0);
//myflv.autoRewind = true;
//myflv.stop();
onscreen_replay_btn.visible = true;
//========================= Actions for Stop Button
=========================//
//========================= Actions for Button Controls
=========================//
//========================= Actions for Displaying Elapsed
and Total Time =========================//
myflv.addEventListener(MetadataEvent.METADATA_RECEIVED,
cp_listener);
function cp_listener(eventObject:MetadataEvent):void {
//trace("Elapsed time in seconds: " + myflv.playheadTime);
//trace("Total time is: " + eventObject.info.duration);
var rounded:int = Math.round(eventObject.info.duration);
var minutes:int = Math.floor(rounded/60);
var seconds:int = rounded%60;
flvTotalTime_txt.text = eventObject.info.duration;
flvTotalTime_txt.text = (minutes<10 ? "0" :
"")+minutes+":"+(seconds<10 ? "0" : "")+seconds;
//flvElapsedTime_txt.text = String(myflv.playheadTime);
stage.addEventListener(Event.ENTER_FRAME, updateTime);
function updateTime(ev:Event):void {
var rounded:int = Math.round(myflv.playheadTime);
var minutes:int = Math.floor(rounded/60);
var seconds:int = rounded%60;
flvElapsedTime_txt.text = String(myflv.playheadTime);
flvElapsedTime_txt.text = (minutes<10 ? "0" :
"")+minutes+":"+(seconds<10 ? "0" : "")+seconds;
//========================= Actions for Displaying Elapsed
and Total Time =========================//
myflv.addEventListener(Event.COMPLETE, com_listener);
function com_listener(eventObject:Event):void {
trace("movie complete");
myflv.stop();
onscreen_replay_btn.visible = true;
back_btn.addEventListener(MouseEvent.CLICK, BackButtonClick);
function BackButtonClick(event:MouseEvent):void {
myflv.play();
//myflv.autoRewind = true;
//myflv.stop();
onscreen_replay_btn.visible = false;
/************************************ THE CODE FOR FORWARD
AND REWIND CONTROL STARTS HERE *****************************/
var id1:Number;
forward_btn.addEventListener(MouseEvent.MOUSE_DOWN,
ForwardButtonDown);
function ForwardButtonDown(event:MouseEvent):void {
//forward_btn.onPress = function() {
//mklik_flv.pause();
var dest1:Number = myflv.playheadTime;
id1 = setInterval(function ():void {
myflv.seek(dest1 += 2);
}, 100);
forward_btn.addEventListener(MouseEvent.MOUSE_UP,
ForwardButtonUp);
function ForwardButtonUp(event:MouseEvent):void {
//forward_btn.onRelease = function() {
//myflv.play();
clearInterval(id1);
// ************************ Forward Button Function
// ************************ Rewind Button Function
var id2:Number;
back_btn.addEventListener(MouseEvent.MOUSE_DOWN,
BackButtonDown);
function BackButtonDown(event:MouseEvent):void {
//back_btn.onPress = function() {
//mklik_flv.pause();
var dest2:Number = myflv.playheadTime;
id2 = setInterval(function ():void {
myflv.seek(dest2 -= 2);
}, 100);
back_btn.addEventListener(MouseEvent.MOUSE_UP, BackButtonUp);
function BackButtonUp(event:MouseEvent) {
//back_btn.onRelease = function() {
//mklik_flv.play();
clearInterval(id2);
}how long is your flv (in seconds), if allowed to play without
ff/rewind/pause? -
Very Urgent Help needed - Arabic support in Forms6i& reports6i
Hi,
Its a very very very urgent requirement.
How to Provide the arabic support in forms .
I am working on Windows Xp operating system.
1. How to Configure the Windows XP Operating system to provide arabic support?
In Design time i want to use English and during runtime i should be able to toggle beteen English and Arabic for Entering the data.Arabic data should be captured in seperate fields.
1. How to configure the oracle 8i/9i databases to provide both arabic(Saudi Arabia) and english? what characterset i need to
choose for saudi arabic?
2.How to install forms & Reports with arabic support?
3.How to dispaly the data in both english and arabic in forms and reports during runtime?
I will be really greatful if u are able to provide me that help and my advanced thanks to ur help.This very
very urgent.
Regds,
B.Prasad
[email protected]Badma,
1. How to Configure the Windows XP Operating system to
provide arabic support?Please go to "Regional and Language Options" from the Control Panel. In the "Standards and formats" group of the "Regional Opitons" tab, select "Arabic (Saudi Arabia)". In the "Language for non-Unicode programs" group of the "Advanced" tab, select "Arabic (Saudi Arabia)", then restart Windows. If "Arabic (Saudi Arabia)" is not listed, then please go to the "Langauges" tab and make sure the "Install files for complex script and right-to-left languages (including Thai)" in the "Supplemental language support" group is checked.
1. How to configure the oracle 8i/9i databases to provide
both arabic and english? what characterset i need to
choose for saudi arabic?If you're not planning to support other languages than Arabic and English (7-bit), AR8MSWIN1256 should work for you. If you're planning to support other languages in the future, I would recommend you to create your database in UTF8 (Forms/Reports 6i doesn't work with AL32UTF8 database). Please note Arabic characters are represented in 2 bytes in UTF8 while they are 1 byte in AR8MSWIN1256.
2.How to install forms & Reports with arabic support?If you need Arabic translation, then please select Arabic when you're asked the language(s) to install. Otherwise, notmal Forms/Reports installation should work for you.
3.How to dispaly the data in both english and arabic in
forms and reports?Set your NLS_LANG to ARABIC_SAUDI ARABIA.AR8MSWIN1256.
Hope this helps.
Regards,
- Makoto -
Hi AS2 experts,
Regarding AS2 sender adapter:
We will provide the details
TP: HTTP
MP: AS2
*Message Subject = **
1. Can anyone please clarify what is this message subject ??
Its the incoming file name we need to provide?
According to few blogs,
2. We will be providing the below URl to the partner system to send there messages.
HTTP://<your-xi-server>:50000/SeeburgerAS2/AS2Server
Consider im having partner systems A,B,C .
and we will be creating 3 communication channels(CC1 ,CC2 ,CC3) to three partner systems.
If i provide same URL to all the three partner systems.
Then how it will differentiate like which file is belongs to which interface (from which partner it is coming)?
And im not providing anything specific in all the AS2 sender comunication channels to differentiate these files.
What is this AS2ID which we will provide in Party Configuration.
WIll it makes any difference to above problem?
Kindly suggest me if anyone has idea about this asap.
Its Very very urgent.
ThankYou.
Regards
Deepthi.Hi,
>>>>1. We need to provide the below URl and Port to the partner to receive the messages?? HTTP://<your-xi-server>:50000/SeeburgerAS2/AS2Server
I guess yes . you need to provide this URI.
>>>>>2.Is it possible to do content based routing by using Message Subject?
yes it is possible to determine the receiver depending upon ur condition. Please provide the context object at design time and at the time of Configuration , using XPATH you can determine conditional receiver.
please look in to this links u will come to know about seeburger adapter.
/people/bla.suranyi/blog/2006/06/08/sap-xi-supports-edifact
/people/william.li/blog/2006/03/17/how-to-get-started-using-conversion-agent-from-itemfield
/people/paul.medaille/blog/2005/11/17/more-on-the-sap-conversion-agent-by-itemfield
http://www.stylusstudio.com/edi/XML_to_X12.html
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/b0b355ae-0501-0010-3b83-8f2bb566fa47
Details on XI EDI adapter from seeburger
/people/bla.suranyi/blog/2006/06/08/sap-xi-supports-edifact
http://www.seeburger.it/fileadmin/it/pdf/2005_04_sapphire_Ferrero_transcript.pdf
http://www.seeburger.com/fileadmin/com/pdf/Butler_Group_SEEBURGER_Technology_Audit.pdf
http://www.seeburger.com/fileadmin/com/pdf/AS2_General_Overview.pdf
SAP Adapters
EDI with XI
http://www.seeburger.com
http://www.seeburger.com/fileadmin/com/pdf/AS2_General_Overview.pdf
http://www.seeburger.it/fileadmin/it/pdf/2005_04_sapphire_Ferrero_transcript.pdf
http://www.seeburger.com/fileadmin/com/pdf/SEEBURGER_SAP_Adapter_engl.pdf
http://www.seeburger.com/fileadmin/com/pdf/Butler_Group_SEEBURGER_Technology_Audit.pdf
http://www.sap.com/france/company/events/2006/02-01-Automotive-Seeburger.pdf
http://h41123.www4.hp.com/presentations/ISUG/XISeeBurger.ppt
http://www.sap.com/asia/company/events/nwtechdays/presentation/australia-slides/Pre-Built_Integration.pdf
http://www.seeburger.com
http://www.seeburger.it/fileadmin/it/pdf/2005_04_sapphire_Ferrero_transcript.pdf
http://www.seeburger.com/fileadmin/com/pdf/Butler_Group_SEEBURGER_Technology_Audit.pdf
http://www.sap.com/france/company/events/2006/02-01-Automotive-Seeburger.pdf
http://h41123.www4.hp.com/presentations/ISUG/XISeeBurger.ppt
Hope this will help you.
Regards
Aashish Sinha
PS : reward points if helpful -
Very urgent need to install 9.2.0.5 on IBM pSeries!!
Hi All,
This is very urgent requirement for me that I need to install 9.2.0.5 on IBM pSeries AIX V5.3 LPAR configured with HACMP.Is there any precution need to make before installation? and what is "LPAR configured with HACMP".
I mean if you describe "LPAR configured with HACMP" the the task become simple.your advise is highly appriciated.
lot's of thatnks to you.My reply to this post is a pure guess and is based on my experience on VMware tool.
LPAR is a tool which helps you put many OSes on a single Hardware, allowing to run all of them at the same time. Basically all the OSes will share the hardware resources.
This saves the hardware cost for the company and helping utilize the same hardware more effectively. Again, each OS will act as an independent machine (lets call it Virtual Machine), users can specifically connect to this virtual machine istead of connecting to the host machine.
In your case LPAR has one of the OS as AIX V5.3.
So, probably your task is to Install Oracle 9.2.0.5 on the OS AIX V5.3.
Hope it helps. -
I need one recurcive(unended loop) pl/sql example, its very urgent pls
Hi,
I need one recurcive (unended loop) pl/sql example, its very urgent pls
Thanks,
Sathis.I suppose you'll want to know how to get out of your undended loop too (although that does stop it being unended).
Example...
SQL> ed
Wrote file afiedt.buf
1 DECLARE
2 v_cnt NUMBER := 0;
3 BEGIN
4 LOOP
5 EXIT WHEN v_cnt = 1000;
6 v_cnt := v_cnt + 1;
7 END LOOP;
8* END;
SQL> /
PL/SQL procedure successfully completed.
SQL> -
VERY URGENT: need to access back to trial account - also paying
Hi,
my trial account for Adobe Connect is expired.
If I'll pay for new session, will I be able to access to my trial account? (I need to download the flv registration.)
I've already asked to the Adobe Marketing: NOBODY replied to me.
It's very urgent.
Thank you,
MCSo I contacted an Italian reseller, because I didn't receive any answer from Adobe (how really really bad is the Adobe support?).
They said the registrations couldn't be recover.
How bad!
A reminder that my account was expiring and the chance to upgrade my account would have been enough...
I'm looking forward to other non-Adobe solutions with better support!
MC
Maybe you are looking for
-
Plug in says to update Adobe Acrobat, but I have newest version
I have updated and it has verified when I retried to update but yet the plugin still tells me to update as there is a vulnerability. Should I uninstall Firefox and reinstall?
-
SOAP response XI - SAP Business Connector
Hi all, I'm working on a project using SOAP messaging between SAP BC and XI. I'm sending a soap message from XI to BC. I configured the communication channel: Adapter Type - SOAP Transport Protocol - HTTP Message Protocol - SOAP 1.1 ecc..
-
Apr 9 20:49:13 server.example.com clamd[27683]: Can't get file status Apr 9 20:49:13 server com.apple.launchd[1] (org.clamav.clamd[27683]): Exited with code: 1 Apr 9 20:49:13 server com.apple.launchd[1] (org.clamav.clamd): Throttling respawn: Will
-
Creating ImageIcon from Image is very slow
Hi I have a program which reads a number of files which may contain (amongst other things) image data in various formats such as JPG.I read scale this down into an image object fine, and then I want to display a small version of it on screen so I put
-
EREC: work experience, make end date not mandatory, current employer flag?
Hi, is there a way to make the end date of an external candidate's work experience NOT mandatory when the candidate is created by a recruiter? Here's the code that triggers the error message when the recruiter doesn't enter an end date: WD: ERC_C_CAN