Need comparable contact managament to Act by Sage that will synch with iphone

I am having trouble finding a contact management solution similar to Act (which, obnoxiously, does not synch with iphone). Most I am finding are too bloated and complex (ex. Salesforce). I need it to synch with my iphone and Entourage on my MacBook Pro. I am in sales, with an awful memory. I just need somthing to log all interactions with contacts. I do not need to run sales reports, handle campaigns, workflows, etc. Thanks!

Here are just a few suggestions others and by no means is exhaustive, I am sure others will weigh in.
-Just a cursory read of the support forum I have not seen overwhelming complaints that iPhone does not work with windows. It seems mac and windows work equally well with the iPhone
-Ringtones if you like ringtones and could see your self loading your iPhone up go with the mac. Garage Band gives you the ability to make ring tones from your own music collection for free. There are down loads like iToner etc that are unofficial ring tone makers so it makes it a little more difficult to you use.
-As long as memory of your devices exceeds 16 GB (which is as high as the iPhone goes) you will be able to take full advantage of your iPhone. Anything more will not make a difference.
-There is no heavy processing involved with your iPhone syncing to your desktop/laptop. What we are taking about is down loading contact lists music etc. No real graphics rendering is taking place. The iPhone is a seperate system you desktop/laptop to manage your iPhone for preferences downloads etc. So processing speeds do not matter that much.
-iPhone apps work with any iPhone regardless of what OS it is synced to. Even if you would like to use Mobile Me it can utilize some windows programs.
What I would do is figure out which or your personal computers you use most. Then I would set up a Mobile Me account then I would add all other computers you might use to sync with your Mobile Me account and this would solve all of your problems, for 99 bucks/year that is.

Similar Messages

Need a printer driver for a PIXMA MG2900 that will work on my MacBook Pro Operating System OSX 10.4.11

I have just purchased a Canon Pixma MG2900 printer and need to find a driver for this printer that will work with my MacBook Pro Operating System OSX Version 10.4.11.
I was directed to iTunes PIXMA/MAXI, but it didn't seem to download for me. It did say that it was for IPads or IPhones, not sure that it's intended for use on a computer.

Probably best to go to a library and submit your resume there.
You can make many web browsers claim to be ie. Here is how.
TenFourFox -- It's a port of the latest FireFox to run on older hardware and software.
"World's most advanced web browser. Finely tuned for the Power PC."
-- works for me on 10.4. Supports 10.5
http://www.floodgap.com/software/tenfourfox/
alternative download site:
http://www.macupdate.com/app/mac/37761/tenfourfox
OmniWeb uses the lastest Safari framework. The open source WebKit. Other browsers like Safari and iCab use the OS version of WebKit. The OmniWeb downloaded dmg includes it's own copy of the latest WebKit.
http://www.omnigroup.com/products/omniweb/
Safari 4.1.3 for Tiger
http://support.apple.com/kb/DL1069
iCab - The Taxi for the Internet
http://www.icab.de/
What is my user agent?
http://whatsmyuseragent.com/
You want to change your user agent to be ie.
in tenfourfox
tools > add-ons
seearch for change user agent
install
user agent switcher
tools > User agent switcher
change to ie.

I am interested in replacing my contact management software(act) with something on my Ipad.

I am interestuing in replacing my current contact management system(Act) with something on my Ipad. Does anyone have any suggestions? I would need to transfer it from my PC.

Does the Contact Managemet system need to be on the PC? We have software called BlackBook - it's a server-based contact management system on the Mac, and it has a CardDAV server so we can get the contacts on our iPads and iPhones.
Does that help? Here's their website
J

I'm in realestae, and i need a client manager that will sync with my iphone, ipad and mac if i make changes on one device. Any sugestions.

I'm in realestae, and i need a client manager that will sync with my iphone, ipad and mac if i make changes on one device. Any sugestions.

Try using icloud and that should solve your problem

I need to install an App that will work with my iOS. How do I get an earlier App that is not now in the App Store?

I have an iPod Touch that can only run iOS 3.1.3. I have had Zinio & PressReader (both free Apps) installed on it for many years, and subscribe to a number of Magazines and Newspapers. I had backed up the iPod in September 2012. Today, I had to restore the iOS from the backup, but saw that Zinio and PressReader had not been installed. I am aware that the iTunes store explains that the latest versions are for iOS 4.3, but I need the latest version that will work with my iPod on iOS 3.1.3.
Does anyone know how I can get hold of the earlier versions of the "ipa" files, short of asking the publishers themselves?
And, should I expect the Publishers to release the appropriate ipa to me?

You aren't being left in any lurch. Your hardware is obsolete, and the software world has moved on. If you have a qualm about the matter then discuss it with the software's developers. Apple is not responsible for software they do not develop. This is technology, and you will just need to get used to it.

I get no wireless signal in my home, so need a network extender for the Lumia 2520. Specs indicate LTE FDD network:Band 20 (800MHz), Band 3 (1800 MHz), Band 7 (2600 MHz). Does Verizon offer a network extender that will work with the Lumia?

I get no wireless signal inside my home, only outside, so I need a network extender that will work for the Lumia 2520, Specs indicate it uses LTE FDD netork Band 20 (800MHz), Band 3 (1800MHz), Band 7 (2600 MHz). Does Verizon offer a network extender that will work with the Lumia 2520?

We want to make sure you get service in your home Astromandata! I can check your area to see if you qualify for the network extender. What's your zip code? If it does qualify than you will be able to use it for your Lumia to support your voice services. Find out more information here: http://spr.ly/6585fNlt Is anyone else having this issue?
AmberF_VZW
Follow us on Twitter @VZWSupport
If my response answered your question please click the �Correct Answer� button under my response. This ensures others can benefit from our conversation. Thanks in advance for your help with this!!

Need a sound card that will work with my speak

i have the creative Digatal 5700 speakers and i need a card that will work with them using the digital DIN input. also dont have alot of money,and would like with the control panel on the front of the pc like the fatalty.

The <A href="
http://us.creative.com/products/product.asp?category=&subcategory=205&product=907"]Audigy 2 ZS Platinum[/url] should be able to fit your need.
Jason

I have an old MAC using OS 10.5 (does not have Intel processor). I need a new printer, but i cannot find one that will work with such an old operating system. Is there a new printer that will work with this old system?

I have an old IMAC using 10.5, and it cannot use any newer operating system. I need a new printer, but I cannot find one that is compatible with this old system.
Is there a new printer out there that will work with 10.5?
Thanks,
Niles Stroh

Canon Pixma iP4950 works great with my PPC G5 iMac on Leopard. Maybe other of their models do as well.

Need help choosing optimal hardware for a laptop that will run AE CS5

BACKGROUND INFO (Questions listed below)
I need some help figuring out the best hardware configuration for a new laptop. I’m a student at a design school and I will be using the laptop to mainly run After Effects and to a lesser extent Photoshop and Illustrator. I don’t need to worry about 3D rendering software or Premier Pro. I am primarily interested in getting the best performance during editing. I am not looking for the best performance for final output. I would prefer to sacrifice final output times for better editing/interface performance.
I will be working with standard definition content and perhaps HD up to 720p on occasion. I do not need to operate in resolutions higher than 720p. My projects are generally animation and use many sources and many layers.
I’ve been reading up on optimal hardware configurations for CS5 but my understanding is still a little foggy and I would like to use this thread to figure out how to build the best machine for my budget. The budget is about $1400 to $1600 CANADIAN after tax.
I DON’T need help finding the laptop. I will search for it on my own. I just need to understand the best hardware to purchase within my budget.
I realize that it is probably impossible to buy the laptop I want with the hardware configuration I need “off the shelf”. Instead I will be looking for a good base model (~$900-$1100) and I will purchase the necessary hardware upgrades separately. I will not be purchasing a Mac.
Right now I’m thinking of a machine built something like this:
- 15”-16” screen (17” models are too big/heavy)
- Mid to high end i5 processor OR entry level i7 quad core
- 8GB RAM (I would go to 12GB, but it’s hard to find a 15”-16” laptop with 3 memory slots)
- SSD to replace HDD (However, if possible, I would like a laptop with dual HDD support or swap the optical drive for another HDD. If I had access to 2 drives, I would have and HDD/SSD combo).
- Medium/high end NVIDIA GPU to take advantage of OpenGL while editing.
QUESTIONS
1) Does the “Render Multiple Frames Simultaneously” option enhance general editing performance (applying filters, scrubbing through the timeline, reverting history states)? Or does it ONLY help speed up RAM previews and final output? Does it reduce the length of RAM previews?
1b) Is this option even necessary to enable on 64bit systems? (As far as I understand it was used to solve a problem where 32bit systems/software would only recognize 4GB of RAM per instance of AE).
1c) If I turn this option on to help with RAM previews, would I be hindering general editing performance in any way? Or does this option have basically zero drawbacks?
2) How come “Actual CPUs that will be used” will read 0 even if the sum total of RAM assigned to the CPUs plus the RAM reserved for other applications is less than the total available system RAM (on a 64bit system)? For example, I currently have 4GB RAM and 2 installed CPUs. I have 1.5GB reserved for other programs and when I set 0.75GB per CPU both CPUs are used. However when I set 1GB per CPU then 0 CPUs are used, even though the total RAM adds up to only 3.5GB.
CPU
3.) Considering the fact that I am more concerned with smooth performance while editing rather than final output speeds, would it be better to get a dual core i5 clocked around 2.5 or a quad core i7 clocked around 1.8?
4.) What is the difference between an i3 and an i5 processor even if they are clocked at the same speed? How does an i5 460M compare on the grand scheme of things?
RAM
6.) Should the quantity of RAM that I get (8GB vs 12GB) be based on the number of cores in my CPU? If so, how should I be calculating optimal RAM based on # of cores. Should I also be counting threads, or just actual physical cores?
STORAGE/SWAP
7.) Should I replace the HDD with an SSD? I'm looking for snappy interface performance while editing. I would think that if the RAM fills up it would be best to have the SSD for scratch/cache.
8.) What performance benchmarks are most important when considering an SSD for After Effects? (4k writes? IOs per second? Max read/write?)
9.) I can afford the OCZ Vertex2 120GB SSD. Would this be a good choice if an SSD is recommended?
10.) Would it be better to have 8GB of RAM and an SSD, or 12GB of RAM and an HDD? Explain why.
GPU
10.) After Effects utilizes OpenGL to enhance editing performance. I will not really be using Premier Pro, so catering to the CUDA Mercury Engine is not a concern. Do high end gaming cards provide significant gains in OpenGL performance? Or do OpenGL performance gains taper off around the mid-range GPUs? (i.e. can you justify buying a high end GTX 260M graphics card for enhanced editing performance versus an "entry level" dedicated card like the 310M?)
11.) What hardware specs are most important when considering a GPU for editing performance in AE? (Memory size? # of Pixel shaders? Core speed? Shader speed?)
Thanks so much for any answers you can offer to these questions.

Please make sure that you've read through this page and what it points to.
> 1) Does the “Render Multiple Frames Simultaneously” option
enhance general editing performance (applying filters, scrubbing through
the timeline, reverting history states)? Or does it ONLY help speed up
RAM previews and final output? Does it reduce the length of RAM
previews?
It only increases rendering speed for RAM previews and rendering for final output. In After Effects CS5, it doesn't decrease the length of RAM previews. (In CS4, it does.)
1b) Is this option even necessary to enable on 64bit
systems? (As far as I understand it was used to solve a problem where
32bit systems/software would only recognize 4GB of RAM per instance of
AE).
You misunderstood. Yes, it's still relevant on 64-bit computers. Moreso, in a way. (I'd rather not spend my entire Sunday writing out detailed answers to satisfy idle curiosity, so I'm not going to give all the technical detail to that answer.)
> 1c) If I turn this option on to help with RAM previews,
would I be hindering general editing performance in any way? Or does
this option have basically zero drawbacks?
It takes a small but nonzero time for the background processes to start up when they need to be used and shut down when they're done. And as they sit waiting, they take up a little bit of memory. So, it's not exactly correct to say that there are no downsides to leaving it on. But it's close. I leave it on.
> 2) How come “Actual CPUs that will be used” will read 0 even
if the sum total of RAM assigned to the CPUs plus the RAM reserved for
other applications is less than the total available system RAM (on a
64bit system)? For example, I currently have 4GB RAM and 2 installed
CPUs. I have 1.5GB reserved for other programs and when I set 0.75GB per
CPU both CPUs are used. However when I set 1GB per CPU then 0 CPUs are
used, even though the total RAM adds up to only 3.5GB.
4GB - 1.5GB for other software leaves 2.5 GB for After Effects.
If you have 1GB assigned per background CPU, then the foreground takes 1.2x that = 1.2GB. That leaves 1.3GB for background processes, which is enough for one background process. There's no point in starting only one background process to do rendering, so it doesn't bother. (Note: When background processes are rendering, the foreground process isn't rendering.)
> 3.) Considering the fact that I am more concerned with
smooth performance while editing rather than final output speeds, would
it be better to get a dual core i5 clocked around 2.5 or a quad core i7
clocked around 1.8?
Get the quad-core. That gives you a greater total number of cycles. And After Effects works very well with mutliple processors, even beyond Render Multiple Frames Simultaneously multiprocessing. An entirely unrelated sort of multiprocessing (multithreading) spreads work out to multiple processors.
> 6.) Should the quantity of RAM that I get (8GB vs 12GB) be based on the number of cores in my CPU? If
so, how should I be calculating optimal RAM based on # of cores. Should
I also be counting threads, or just actual physical cores?
The optimum amount is the amount that you can cram into the computer. I'm not kidding. Spend your budget on RAM until you have 4GB installed per processor (and I'm counting the virtual processors due to hyperthreading). If you have a quad-core, that's 8 CPUs with hyperthreading, so the optimum amount of RAM installed is 32GB. You can work with less, but you did ask about optimum. For HD work (i.e., 1920 pixels across), you're OK with more like 3GB installed per CPU. That's what I have at home: 24GB in a quad-core. You're going to assign 2/3 or so of the RAM to After Effects, so 3GB installed per CPU is 2GB per core for HD work in After Effects.
> 10.) Would it be better to have 8GB of RAM and an SSD, or 12GB of RAM and an HDD? Explain why.
12GB of RAM. Because After Effects likes RAM. (If you're thinking of deliberatly using virtual memory to swap memory to the hard disk, don't. That's a performance killer.)
> 10.) After Effects utilizes OpenGL to enhance editing performance.
Not really. If you're on a limited budget, don't even think about the GPU until you've already got the most RAM, the fastest CPUs, the largest number of CPUs, two fast hard disks, and a couple of good monitors. Then, and only then, should you even consider getting soemthing beyond a non-stock graphics card. Yes, OpenGL can be used to accelerate some things, but that's only for the low-fidelity preview renderer. (Pardon the bluntness, but I want to make sure that you heed this.)

I need to install Internet Explorer on my iMac G5 (OSX vs 10.4.11). Is there a secure source for downloading an older version of IE that will work with my system?

I'm not sure I properly asked my question. I have a need to post a resume to an employer who requires that the information be submitted via Internet Explorer. My OSX vs 10.4.11 will not accept downloads of the current IE version and Microsoft no longer supports any earlier versions that would work with my Mac. A web search shows thousands of download possibilties, but I am leery of what kind of schmutz might come with them. Has anyone in the community have any recent experience with a secure Internet Explorer download

Probably best to go to a library and submit your resume there.
You can make many web browsers claim to be ie. Here is how.
TenFourFox -- It's a port of the latest FireFox to run on older hardware and software.
"World's most advanced web browser. Finely tuned for the Power PC."
-- works for me on 10.4. Supports 10.5
http://www.floodgap.com/software/tenfourfox/
alternative download site:
http://www.macupdate.com/app/mac/37761/tenfourfox
OmniWeb uses the lastest Safari framework. The open source WebKit. Other browsers like Safari and iCab use the OS version of WebKit. The OmniWeb downloaded dmg includes it's own copy of the latest WebKit.
http://www.omnigroup.com/products/omniweb/
Safari 4.1.3 for Tiger
http://support.apple.com/kb/DL1069
iCab - The Taxi for the Internet
http://www.icab.de/
What is my user agent?
http://whatsmyuseragent.com/
You want to change your user agent to be ie.
in tenfourfox
tools > add-ons
seearch for change user agent
install
user agent switcher
tools > User agent switcher
change to ie.

Do I need rtexprvalue set to true for a String that will vary from page to page?

Hi I am a newbie to JSP tags. I have done enough reading so far to see
          that if I want an attribute of the tag to be a scriplet ie:
          <foor:bar name="<%=myObj.getName()%>" />
          then the rtexprvalue for this attribute in the TLD needs to be true.
          My question is what if I have an attribute that will not be read from
          a scriplet but will vary from page to page. ie:
          <foo:authorize securityLevel="1"> but on another page it will be
          <foo:authorize securityLevel="3"> etc.. Since many servlet containers
          create only one instance of the tag class and then re-use them from a
          pool do I need to set rtexprvalue to true for an attribute like this
          to make sure the tag reads the correct one as I go from page to page?


          You do not need to set rtexprvalue to true for the situation you describe.
          Laura
          Developer Relations Engineer
          BEA Support
          [email protected] (Mike Lomage) wrote:
          >Hi I am a newbie to JSP tags. I have done enough reading so far to see
          >that if I want an attribute of the tag to be a scriplet ie:
          > <foor:bar name="<%=myObj.getName()%>" />
          >then the rtexprvalue for this attribute in the TLD needs to be true.
          >My question is what if I have an attribute that will not be read from
          >a scriplet but will vary from page to page. ie:
          > <foo:authorize securityLevel="1"> but on another page it will be
          > <foo:authorize securityLevel="3"> etc.. Since many servlet containers
          >create only one instance of the tag class and then re-use them from a
          >pool do I need to set rtexprvalue to true for an attribute like this
          >to make sure the tag reads the correct one as I go from page to page?

I need instructions on how to create a button that will email a pdf form to someone else on a websit

I NEED ASSISTANCE CREATING A BUTTON THAT WILL EMAIL A PDF FORM FROM A WEBSITE TO WHOEVER THE VIEWER WANTS TO

Just a bit more info. E-mail can be used, but has potential problems -- often related to the client machine that you have no control over. Use the data submissions (either FDF or XML) rather than the full PDF so you do not have to deal with Reader Rights and the related license issues. The FDF and XML data files are easily imported into the original form so that you see what the client sees. With those aspects in mind, just go ahead and try one. Be aware that you can add form fields using the form tools in the Advanced Editing tools, OR use the forms menu that will take you to Designer. You might want to try both to see the pros and cons. Be sure to keep such a test simple so you are not wasting time on your final form just for testing. I typically create a 1 page form that has all of the possible fields for such a test.

Macbook pro outlook contacts not synching with IPhone 6. Turned off cloud.

I traded in an Iphone 4 for an Iphone 6. MacBook Pro (outlook 2011 contacts) did sync perfectly with iPhone 4. Not able to synch contacts with iPhone 6. (did turn off cloud functionality) . Thanks for your reply.

Hello rob5257,
I'm sorry to hear you are having these issues with your iCloud Contacts. If certain contacts do not appear to be syncing correctly from your devices to iCloud, you may find the troubleshooting steps outlined in the following article helpful:
Get help using iCloud Contacts - Apple Support
Sincerely,
- Brenden

Need to contact manager over a retail store

I am interested in discussing a customer service issue that occurred at a local retail store. Not sure how to go about contacting that person. I asked the store manager for that information and the request was ignored.

You can contact your regional customer service VP. The link is below.
http://www.verizonwireless.com/aboutus/leadership/executive/profiles/joan-bowyer.html
Good Luck

I need help contacting someone that can help me find who the previous owner was who set up my iphone 5s, there is an activation lock and i need to contact the owners. help??? i think the iphone was stolen and then sold to me

i think my iphone was stolen before being sold to me, i need help finding out who the original owner was to unlock the phone. any ideas on numbers i could ring? im super gutted

If you are trying to activate an iPad or iPhone and it is asking for a previous owners Apple ID and password, you have encountered the Activation Lock. This is a security feature that prevents thieves from setting up and using a stolen or lost iPad or iPhone. You have no alternative. You must contact the previous owner to get permission to use the device. If you cannot contact the previous owner return the device to where you bought it and get a refund. You will never be able to activate the device and no one can help you do it.

Need comparable contact managament to Act by Sage that will synch with iphone

Similar Messages

Maybe you are looking for