Need component to raise message to automatically confirm the patch

Hi,
We have our DVM Scoping Session scheduled with SAP ,for this I have to upload some patches in SOLMAN, but while confirming the patches from SOLMAN it is giving an error "error during call of SAP backend system".I read SAP note number
982045 and accordingly found that our OSS password is correctly maintained still this error.I have raised a customer message to SAP for this.
In the mean time can anyone tell me the component via which I can raise a message to SAP to release the patch,
so that it can be downloaded from the download basket.I googled but couldn't find.
This would be a great help.
Regards,
Edited by: Pramod Gurjar on Mar 31, 2010 8:39 AM

Got it.
It is SV-SMG-MAI-APR
Regards,

Similar Messages

Can Markers (or anything else) automatically change the patch?

I've been looking all over to try and figure out how to have MainStage automatically change to the next patch when a new Marker comes up on the backing track through PlayBack.
Basically, when i'm playing to a backing track, i sometimes play the pads and keys on my Akai MPK49, and when a new section comes up and i need need to change my synth sound, i don;t physically have enough hands to change to the next patch. I've read a load guides, but using the AIC driver in Logic seems far too complicated and I'm getting a bit out of my depth.
The whole point of me using markers is to identify different sections with different instruments, but I have to change between them manually anyway?
Is there a way to have the Marker automatically change the patch? The only other way i can see of getting round this live is having a midi footswitch to automatically cycle through the patches, which means Markers are of no use to me in my 'Perform' view really.
Any help would be amazing!

Hi
Currently, there is no 'super easy' way to have MS change patches automatically, and definately NOT directly from Playback markers.
It may be possible to make use of the MIDI file 'send' capability per patch or set, routing out and back in to MS, but frankly, NOT a great workaround.
CCT

How to avoid messages going automatically to the archive folder in Apple Mail?

Dear list members, I've been using Apple Mail (version 7.3 (1878.6)) on my MacBook Pro 13" (9,2) (MacOS 10.9.4) for years to integrate my GMail, university, and other e-mail accounts in the imap mode. Since some weeks, Mail is behaving odd: some messages are sent automatically to the archive folder. That's quite annoying, as I have to move them manually back to the inbox folder, and sometimes I mess some messages. I did not change any config in Apple Mail or my e-mails servers. Could you please help me solve this problem? Thanks.

The Archive folder in Apple Mail is linked to the All Mail "label" in Gmail. A label is treated like an IMAP folder, but it really isn't the same thing.
In case you weren't aware, Gmail saves every email you send or receive inside the All Mail label. In Gmail, you can tag a file with multiple labels. So, a file that comes into Gmail appears in two places at once, the Inbox and All Mail. When you trash a file, the Inbox label is removed, but it still remains in All Mail.
Previously, the All Mail label was hidden from you in Mail. Apple has been trying to make Mail work with Gmail, but that hasn't been going well.
I have never had a problem, but I have both Gmail and Apple Mail set up such that any email I trash actually gets deleted and not stored on the Gmail server. I also have it set to no display the All Mail folder at all. This may not be a fix as others have similar setups, but have problems with Gmail.
This is how I set it up. I followed the original article, not the Part Deux article. However, you don't need to change the IMAP path prefixes or the label names in Gmail settings. I just have the part where I configured it to delete the emails when I trash them, and hid all the Labels I didn't care to see in IMAP.
Remember, this may not resolve your problems. I don't know of another "fix."

How can I store messages sent automatically in the inbox?

I am using Thunderbird and want to Switch to Mac Mail. One feature I cannot do without it having my own sent messages delivered in my inbox rather than in the sent box. I cannot find such an option in Mac Mail.

You could also try a rule, although I haven't tested it. The criteria would select messages in "sent" box less than a certain age and move to "inbox."
BTW, if you want a lot more control over sending in Mail take a look at Mail ActOn by Indev. It gives you many more options in Mail, especially in sending.
Rob

Why can I only see ten text messages? If i receive an 11th message it automatically knocks the last one off. Please help, it's driving me mad!!!

I have an Iphone 4s and my friends can see all text messages, going back years but I can only see the last ten. If I receive any more than 10 it just knocks the last dated ones off! I have not deleted any so if I haven't deleted any then they must be there but I can't access them. Somebody please help - i've tried everything and gone through every menu!!

I have had a similiar issue with this as well. It gets even scetcher when you create the file extension dynamically.
Technically if one is clever they can create something like this and make the file extension and output format dynamic. What ends up happening is the file extension will get stripped.
I logged a tar with oracle. Kevin in support told me to upgrade to the latest one off patch, I did. The issue still persisted. Kevin then stated, using the java api's is unsupported sucks to be me huh.
Example:
<?xml version="1.0"?>
<xapi:requestset xmlns:xapi="http://xmlns.oracle.com/oxp/xapi" type="bursting">
<xapi:request select="/XXBOL_POXPRPOP/LIST_G_INIT_INFO/G_INIT_INFO/LIST_G_HEADERS/G_HEADERS">
<xapi:delivery>
<xapi:filesystem id="save1" output="/u20/app/DUVS1/apduvs1/applmgr/apps/apps_st/appl/xxbol/1.0.0/temp/bursted/Output_${POH_PO_NUM}.${FILE_EXT}"/>
</xapi:delivery>
<xapi:document output-type="${FILE_OUPUT_FORMAT}" delivery="save1">
<xapi:template type="xsl-fo" location="xdo://XXBOL.XXBOL_POXPRPOP_TP1.en.GB"/>
</xapi:document>
</xapi:request>
</xapi:requestset>
Anyways, it seems like whenever there is an error or mistake anywhere pdf is defaulted (just like you said). It would be much better if it just bombed.
For the sake of doubt try changing it to:
/XXBOL_POXPRPOP/LIST_G_INIT_INFO/G_INIT_INFO/LIST_G_HEADERS/G_HEADERS/POH_PO_NUM
There is zero doubt this node and value should be available to the burster. If that doesn't work it's tar time. Verify the xpath is good in cooktop or xml spy.
Ike

Installing dreamweaver on mac air osx. Message appears update failed the patch is not applicable to you

Can't install dreamweaver on new mac air osx Keep getting message Update failed This patch is not applicable to you.

Dreamweaver download prob which version of Dreamweaver are you trying to install? What version of Mac OS do you have installed on your new MacBook Air? Finally what specific update is failing?

Automatically confirming phase

Hi PPPI Guys,
For some reason I want to add 1 Resourse at last operation in Master recipe.
Eg:-
0010
0020
0030 Resourse1
0040 phase1
0050 Resourse1
0060 phase2
By confirmation of phase1 0040 then remaining last phase automatically confirm using COR6N.
Please gives me required setting ..

No, the way it works in SAP is you normally confirm in the sequence of increasing operation numbers. 0010 then 0020 then 0030 but you can reduce the effort you can either confirm all the operation at once by setting a milestone control key in the last operation (technically you can use milestone in any operation, not just last one) and when you confirm the last one all the operations prior to it like 0010 and 0020 will be confirmed (or) you can confirm at order header level. But... it is not possible to confirm some random operation in the middle and expect to automatically confirm the last operation.

Automatically selecting the correct network.

My wife has an G4 iBook. She has a wireless network at work and home. When she turns on her iBook at work, it automatically connects to that network.
At home, the iBook selects our neighbor's network. She has to manually select our home network. We want the iBook to select our home's network not the neighbor's.
What settings do I need to change so it will automatically select the home network not the neighbors, when at home and still automatically select the work network when at work?
Thank you
Power Mac G5 Mac OS X (10.4.7)

The laptop is running 10.3.9. I do not see a preferred network list. I can select the location Home and select by default join, Home in the menu. This works from home. But when she goes to work the laptop does not automatically join the work network so she has to manually select the work network.
Only one location works automatically, the other one must be selected manually.
Am I missing something?
Power Mac G5 Mac OS X (10.4.7)

When i turn on itunes, it crashes automatically with the error message saying "itunes has encountered a problem and needs to close." I've tried reinstalling itunes but its the same. CAN SOMEONE PLEASE HELP!!!

when i turn on itunes, it crashes automatically with the error message saying "itunes has encountered a problem and needs to close." I've tried reinstalling itunes but its the same. CAN SOMEONE PLEASE HELP!!!

Try:
iOS: If you can't back up or restore from a backup in iTunes

I have the email confirming iphone is unlatched but need to unlock through itunes. To do this, do I use old sim or new sim? I have backed up and restored but there is no message from itunes saying the phone is unlocked? Please help

I am having problems unlocking my iphone 5. I have received an email from my old provider confirming that the phone is being unlatched and I need to complete the process through itunes. I have backed up and restored but I have not received a message from itunes stating the phone is unlocked. Do I use the old or new sim card while connecting to itunes or does it not matter. I dont know what else to do to finish the unlock?

You can use either, but if you restored to the backup, then you will not see the message. You need to restore the device as new first, then restore the backup. Make sure you can continue with the unlock first. Many of the emails report, "Your unlock has been approved, restore your device in iTunes in 24 hours", or something like that. If it is ready to go, then as I said earlier, restore as new first, and then you should see the confirmation.

The description for Event ID 0 from source VSTTExecution cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.

Hi,
Can any one help me on the below issue ?
while executing automated test case in test center it is showing as test case is in progress, then i navigated to virtual machine (where the test agent is online), there Internet
explore has opened automatically and my test case execution started, but with in a seconds IE has closed . However, in test center, test case status is showing as in
progress, after 2 or 3 min some of test cases getting passed and some are failed.
Here my question is in lab center-->virtual machine, IE has opened automatically and navigated the 2 or 3 links and with in seconds IE has getting closed. Why IE is getting closed without completing execution?
Error Message :
The description for Event ID 0 from source VSTTExecution cannot be found. Either the component that raises this event is not installed on your local computer or the
installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
(mtm.exe, PID 5240, Thread 4) FileAggregatorSessionInfo: Error occurred while deleting temporary directoryException: System.IO.DirectoryNotFoundException: Could not find a part of the path
at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath)
at System.IO.Directory.Delete(String fullPath, String userPath, Boolean recursive, Boolean checkHost)
at Microsoft.VisualStudio.TestTools.Execution.Aggregation.FileAggregator.FileAggregatorSessionInfo.DeleteTemporaryDirectory(String temporaryDirectory)
the message resource is present but the message is not found in the string/message table
Thanks
Suresh
Suresh

Hi,
Can any one help me on the below issue ?
while executing automated test case in test center it is showing as test case is in progress, then i navigated to virtual machine (where the test agent is online), there Internet
explore has opened automatically and my test case execution started, but with in a seconds IE has closed . However, in test center, test case status is showing as in
progress, after 2 or 3 min some of test cases getting passed and some are failed.
Here my question is in lab center-->virtual machine, IE has opened automatically and navigated the 2 or 3 links and with in seconds IE has getting closed. Why IE is getting closed without completing execution?
Error Message :
The description for Event ID 0
from source VSTTExecution cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
(mtm.exe, PID 5240, Thread 4) FileAggregatorSessionInfo: Error occurred while deleting temporary directoryException: System.IO.DirectoryNotFoundException:
Could not find a part of the path
at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath)
at System.IO.Directory.Delete(String fullPath, String userPath, Boolean recursive, Boolean checkHost)
at Microsoft.VisualStudio.TestTools.Execution.Aggregation.FileAggregator.FileAggregatorSessionInfo.DeleteTemporaryDirectory(String
temporaryDirectory)
the message resource is present but the message is not found in the string/message table
We are using VS 2013 (premium) and IE 10.0, scripts have been created on the same versions. It is working fine on
developers command prompt but the same tests are getting failed in lab center test agent machine
test agent log:
QTAgentService.exe, AgentService: calling AgentObject.RunEndFileCopyComplete
QTAgentService.exe, AgentProcessManager.WaitForDataCollectionAgentProcessToStart: waiting for agents to start.
QTAgentService.exe, AgentProcessManager.WaitForDataCollectionAgentProcessToStart: Agents started.
QTAgentService.exe, AgentProcessManager.PerformActionIgnoringExceptions: Successfully called 'Cleanup' on the test agent
QTAgentService.exe, AgentProcessManager.PerformActionIgnoringExceptions: Calling 'StopDataCollection(int)' on the data collection agent
QTAgentService.exe, AgentProcessManager.IsDataCollectionAgentNeeded: IsExecutedOutOfProc? True
QTAgentService.exe, AgentPro
QTAgentService.exe, AgentProcessManager.WaitForDataCollectionAgentProcessToStart: Agents started.
QTAgentService.exe, AgentService: Connection to controller is up.
Thanks
Suresh

Automatic confirmation in process order

Hello everybody.
I need made automatic confirmation to some phases in process order, I hade read that this is possible using process messages.
Process management supports the direct confirmation from the PI sheet and process control system to the process order by sending process messages to predefined message destinations.
Someone know what are the steps I need to follow to customize process message?
What are the transactions that I need to use?
In some documentation say that for access process management, I need proceed as follows:
From the main R/3 menu, select the menu options Logistics u2192 Production - process u2192 Process management.
The system branches to the initial process management menu. From here, you can access all the application functions of process management.
But when I access that path there is not any transaction for use process management.
Something is missing for install or what is the transaction that I need use?
Thanks in advance.

Hi,
You can do that in T Code CORW.
For the required production scheduler select the batch creation for process order.
Also in the Assignment tab of the process order, there is a field for batch, next to it there is a Create button. Click that, you will get the batch number in that field.
Hope that helps.
Regards,
Rohit.
Added: I apologise, its not the Assignment tab in process order. It is Goods Receipt tab.
Edited by: Rohit Chauhan on Aug 3, 2009 9:42 AM

How to Activate component is Support Message

Dear Friends,
Path: Support Message -> Transaction Data -> SAP Attributes-> Component Field, press F4
in the F4 I will get list of components. But for ' MM Material Management' its Grey. If I select MM, system gives error"Software component PP not available , check your entry"
So if I activate this componet MM, then I think it will allow to choose MM & will not give error.
Regards
Praveen K

Dear Rajeev,
The path which I have mentioned. Path: Support Message -> Transaction Data -> SAP Attributes-> Component Field
In this filed MM comes automatically, since end user has raised the support desk message with MM component.so that it will determine MM support team.
Once the support desk message is in process & if I want to change the component (which is already having MM) in the path :Support Message -> Transaction Data -> SAP Attributes-> Component Field
If I edit this MM coponent & try to enter PP it will give error, but even if I want save it with same MM component it give error. ANy way if I want to select MM from F4 , it will not select, Becoze MM Grey color(Not active)
Regards
Praveen K
Edited by: PK on Mar 19, 2010 10:26 AM

***Raising Alerts When the message is struck in the Queue

Hi Experts,
Is there any way of Raising Alerts When the message is struck in the Queue I want to notify the user if the message is struck in Queue(smq1,smq2).Please let me know the same.
Thanks,
Srinivasa

hi
you can trigger alert for any of the component failure.
for this u nees the ccms configuration.
than you need to configure in RZ20 and RZ21.
steps.
1. create alert category in ALRTCATDEF
2.enter long text
3. add fixed recepient.
4.go to RZ21.
5. select display overview for method
6. serch for method CCMS_Send_Alert_to_ALM.
7. copy the method and create ur own Z method.
8. open ur method.
9. under control tab select ONLY IN CENTRAL SYSTEM TRIGGERED BY CCMS AGENTS.
10. in parameter tab give ur alert cat created before.
11.under release tab select AUTO REACTION METHOD.
12. go to RZ20.
13. a list of system will be displyed select ur own xi system
14. now select the queue name for which u want to trigger alert.
15.goto property button and double click.
16. go to method tab and click on method assigment.
17. goto method radio button and assigne the method u created in RZ21.
done.....enjoy....
u can check the log in slg1 tcode
regards,
navneet

Eventlog Forwarding Issues - Either the component that raises this event is not installed on your local computer or the installation is corrupted.....

Hello all,
OK so I do have Event Forwarding working - but I've noticed that when it's first configured I get messages similar to:
The description for Event ID 104 from source Microsoft-Windows-Eventlog cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on
the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
The locale specific resource for the desired message is not present
If I alter the subscription (wecutil ss subname /cf:events) the forwarded events are rendered correctly.
However a product we are evaluating (which depends on event forwarding to work) always ends up with a couple of mal-rendered lines - always look something like:
Required Privs: %9
I built a standalone AD domain and joined the same 'problem' clients to this domain and re-configured Event Forwarding - there was no need to change the subscription format type to "events" and the events were forwarded correctly and also
the product we are looking at worked straight away.
It seems that when event forwarding is configured in our live domain (or any of the test labs we have) I always get the attached errors....
I've read a number of blogs that describe the issue and most recommend altering the subscription format - this however does not solve the issue entirely...
Has anyone else seen this issue and maybe found out how to resolve?
Thanks all
Carl

Yes,
I have ACS forwarder and OPSmgr Agent on Event log collector computer.
Event log collector computer shows some of the forwarded events incorrectly like "The
description for Event ID 104 from source Microsoft-Windows-Eventlog cannot be found"
When I change regional settings on Collector computer, event log shows all events(also previous) correctly.
Forwarded with ACS and Opsmgr Agent events
from collector computer were saved in DB correctly, even when event log show them incorrectly like "The
description for Event ID 104 from source Microsoft-Windows-Eventlog cannot be found"

Need component to raise message to automatically confirm the patch

Similar Messages

Maybe you are looking for