Need confirmation on Import Batch to TCA Registry

Hi Team,
On one of the instance the Import Batch to TCA Registry is getting succeeded and on other instance the same concurrent request is getting failed with ORA-01400 :cannot insert NULL INTO.
Where the both instances are same where i have cloned from the same instance.Could anyone help on this.why it is getting failed.

Pl see if the steps in MOS Doc 279924.1 (How To Import Parties Using Bulk Import Process) can help
HTH
Srini

Similar Messages

Batchbatch assignment ( multiple batches ) takes place - at goods receipt ( order confirmation ) assignment ( multiple batches ) takes place - at goods receipt ( order confirmation )

Hi all,
when will the batch assignment ( multiple batches ) takes place - at goods receipt ( order confirmation ) for each process order ?
we will be prompted for the batch assignment ?
thanks
Vinu

Hi,
Yes system will create three process order considering you have maintain maximum lot lize as 1 Lac in Mateial master MRP 1 View.
and these three process order will have different three batches considering you have batch number assignment as the time of release of production order.
this can be multiple batches as well if partial confirmation done and batch number assignment is done on GR.
If you are looking for one batch for three process order you need to go with development.
Thanks

COR6 can't confirm due to batch

I try to confirm a process order, but encounter below error:
Batch 3000001 Z001 Z010 0000000078 does not exist
Message no. M7042
Diagnosis
For material 3000001, you have entered a batch that does not exist in plant Z001, storage location Z010.
Procedure
If this error has occurred during the entry of a reservation, you can do the following:
Enter the reservation without specifying the batch. The reservation can be posted on a non-batch-specific basis. The batch is not determined until the goods movement is posted.
If you wish to reserve a certain batch, you can call up the stock overview to display a list of existing batches.
If this error occurred on entry of a physical inventory document, you can do the following:
Do not enter a batch. The system will automatically determine all batches that can be included in the physical inventory document.
But I have use MSC1N to create the batch 0000000078 , I didn't put any production date, I put class type:023, this batch appeared in BMBC, Do I need to release this batch, how to release?
if I remove 78 batch and use batch determination in COR6, It says
T331 entry for warehouse number 301 and storage type not found
Message no. LC1004
what's wrong? how to confirm the material 3000001?

Dear
Please check wether you have this set up in place :
1. If you want to do the batch determination during confirmation then you have to create search strategy in MBC1 with MovType/Plnt/MatlNo
2.Did you mark automatic Batch Determination flag in OPJ2 ??
3.Check the batch determination procedure for process order in COB2 ??
4. Check the batch selection criteria in 000000078 whether process order date ?
Refer my earlier thread : batch determination COR6N
Automatic batch determination in process order
Try and check
Regards
JH

Need help to import and syncronize HCM pagelets with Interaction Hub, how can I do that?

Hi,
I need help to import and synchronize HCM pagelets with Interaction Hub, how can I do that? The default page "Select Remote Content" of the WorkCenter "Unified Navigation WorkCenter" is not working as well, when I run the import/sync button I get the following error message:
Integration Gateway: General Connection Failed (158,10836)
This error is thrown when there is no valid response.
Possible errors include:
Bad gateway URL
Sync Service Timeout set and Service actually timed out.
Java exception thrown - Check Application Server for possible Java exception

Do you have integration configured between the two systems? It sounds like you don't from the error. Here is a walk-through on setting up Unified Navigation although it assumes you have integration already working. If you haven't done that, it's documented a hundred different places.
http://remotepsadmins.com/2013/03/04/peoplesoft-unified-navigation-with-peoplesoft-applicatations-portal-interaction-hub/

Need help for importing oracle 10G dump into 9i database

hi, Someone help me to import oracle 10G dump into 9i database. I'm studying oracle . Im using oracle 10G developer suite(downloaded from oracle) and oracle 9i database. I saw some threads tat we can't import the higher version dumps into lower version database. But i'm badly need help for importing the dump...
or
someone please tell me the site to download oracle 9i Developer suite as i can't find it in oracle site...

I didnt testet it to import a dump out of a 10g instance into a 9i instance if this export has been done using a 10g environment.
But it is possible to perform an export with a 9i environment against a 10g instance.
I am just testing this with a 9.2.0.8 environment against a 10.2.0.4.0 instance and is working so far.
The system raises an EXP-00008 / ORA-37002 error after exporting the data segments (exporting post-schema procedural objects and actions).
I am not sure if it is possible to perform an import to a 9i instance with this dump but maybe worth to give it a try.
It should potentially be possible to export at least 9i compatible objects/segments with this approach.
However, I have my doubts if this stunt is supported by oracle ...
Message was edited by:
user434854

Flex pitch (Time) needs midi track import function

Flex pitch (Time) needs midi track import function

HI it's me again ( under my studio name).. I don't use Garage Band. I use Logic x. so don't know why you'd suggest doing away with another program when I have no use for Garage Band.
I think it ended up working only because it was a glitch.... when I exited the program and came back to it, it started working. The only thing that didn't appear was the pitch correction on the left hand side of the sound editor.. the slider button where you can go up to 100%...
but at least it worked. This Apple operating system always has bugs .. but gllitching on my projects doesn't make me a happy camper.
They don't even offer support for it. unless you pay through the roof.
Anyway.. it showed up... not sure how it did, but rebooted my computer and miraculously it was there.

How can I delete all of my contacts from my iphone? I have updated my contact list in Outlook, and need to re-import that "clean" list.

How can I delete all of my contacts from my iphone? I have updated my contact list in Outlook, and need to re-import that "clean" list.

There is a checkbox on the 'info' tab in iTunes that will allow you to overwrite the address book on the phone with the one from the computer on the next sync.

Status "confirming" with payment batch

Hi,
I am working on payment batches et I have a problem with one batch.
Usually, when I want to confirm my payment batches, it works et the status of the batch switch from " formatted" to "confirmed".
The problem is, that I wented to confirm one of my payment batches, but instead of ths status "confirmed", I found "confirming" status et I have only one option: cancel the batch, and I don't want to cancel this one but I want to confirm it.
This is my problem, thank you foryou help.

This seems to be known issue of AP patchset level N or below in 11.5.10. Raise SR and Oracle support should be able to provide your patch.
Tarun

APP-SQLAP-10252: You cannot Confirm a payment batch

Dear all:
IN ORACLE EBS 11.5.9 , When I click the button "Action 1" in "Payment --> Entry --> Payment Batch" and choose the "Confirm the payment Batch" will show the error:
*"APP-SQLAP-10252: You cannot Confirm a payment batch that does not have any payment documents"*
How can I fix the issue?
Regards
Terry

Dear Hussein:
Thank you for your reply. I've checked the ad_bugs and find the Patch 3682716 and 2375849 had been applied. My case seems like hit the Note: 282133.1. I was new for the AP module, I'm not sure the directory of the setting in Note 282133.1. Can you tell me the directory?
1. Review the Preliminary Payment Register output file. It should show an invoice with Document
Number=******* and message No Supplier Bank
2. Check that there is an existing supplier bank
3. Check that a supplier bank is attached to the supplier site for the impacted invoice
4. Check that the Remit-to bank account in Invoice Payment Schedules is correctly populated.
Regards
Terry

Schema export dump needs to be imported to primary and standby

Hi All,
I have one production Db with standby. I have taken the schema level export from the other database which needs to be imported to the production as well standby.
I can manage the down time.
So, can I import it to the production first and then import to the standby. Later on can I synchronize the primary with standby? How
Request your advice on this.
Regards,

SS! wrote:
Hi All,
I have one production Db with standby. I have taken the schema level export from the other database which needs to be imported to the production as well standby.
I can manage the down time.
So, can I import it to the production first and then import to the standby. Later on can I synchronize the primary with standby? How
Request your advice on this.
Regards,You need firstly apply these changes (import the data) to Primary database, then by creating and transferring archived redo log files, apply all changes to Standby database

Document for Import Batch Manager

I am using MDM 5.5 SP6.
Can someone provide me the concepts for MDM Import Batch Manager.
Also provide me the document for MDM Import Batch Manager

Hi Laksmi,
As far as I know, the Import Batch Mechanism has been taken away from MDM SP05 onwards. You can perform the Automatic Importing and Syndication using the MDIS and the MDSS respectively.
You can find the complete process of Automated Import and Syndication in the 2 links mentioned below:
1) Master Data Management Import Server and Master Data Management Syndication Server - Webinar Powerpoint
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/8973bcaf-0801-0010-b7a7-f6af6b1df00e
2) MDM Syndication - This gives you the MDSS config required in the .ini file
/people/harrison.holland5/blog/2006/11/27/mdm-syndication
The 1st link will give you step by step info about Automatic Import and Syndication process.
Hope this helps.
Thanks and Regards
Nitin jain

Exporting/Importing Batch Process

Hello,
I've created a very lengthy batch process and I would like to use it on other computers. Is it possible to export and import batch processes, or do I have to create them from scratch every time?
Thanks

You can run the following JavaScript in Acorbat's JavaScirpt conosle and locate the location of the sequence files:
var userBatch = '\nProduct: ' + app.viewerType + ' version: ' + app.viewerVersion + '\n';
// find application sequences
try {
userBatch += 'Application sequences path: ' + app.getPath('app', 'sequences') + '\n';
} catch(e) {
userBatch += 'There are not any defined application batch sequences\n';
// find user sequences
try {
userBatch += 'User defined sequences path: ' + app.getPath('user', 'sequences');
} catch(e) {
userBatch += 'User has not defined any custom batch sequences';
console.println(userBatch);
And obtain results similiar to:
Product: Exchange-Pro version: 8.101
Application sequences path: /C/Program Files/Adobe/Acrobat 8.0/Acrobat/Sequences/ENU
User defined sequences path: /C/Documents and Settings/loginid/Application Data/Adobe/Acrobat/8.0/Sequences
true

Need help on import from external drive!

I just imported several thousand pictures from an external drive into iphoto 08--unfortunately all photos are listed as one big event--I am now a little confused as to what to do next---I would like them to be imported in the original files (years) if possible...thanks for the help!

In iPhoto preferences (iPhoto menu ==> Preferences ==> events) under AutoSplit events you need to check "Imported items from finder" before you import
Probably the best thing to do *IF THE ONLY THING IN YOUR LIBRARY* is this import is to trash the iPhoto Library from your pictures folder, verify your preference settings and reimport
LN
Message was edited by: LarryHN

HT1338 trouble logging into my imac desktop, why wont it accept my valid password?? Please help I need to retrieve important files. Thanks.

trouble logging into my imac desktop, why wont it accept my valid password?? I was using it fine last night... Please help I need to retrieve important files. Many Thanks.

Do #5 and #6 here others as needed
..Step by Step to fix your Mac
Most commonly used backup methods

IMac Freezing Issue -Need Confirmation...

Hey all,
I need confirmation on whether or not zapping the PRAM seems to stop the iMac freezing issue. I have had 3 freezes within 10 minutes. I restarted after my last preparation to installing Leopard and the screen saver kicked in, which is the 'Cosmos' slide show and the graphics froze up. Screen went black and I left it for a couple of minutes. I came back to it, and had an image on the screen, but it was still locked up. So I restarted it. After boot up, I opened Activity monitor, and locked up again.
So I zapped the PRAM on this 3rd restart and have not locked up since. I'd bet 100 to 1 that if I were to restart, without the PRAM reset, I would crash within 5 minutes of the start up.
I really believe without a doubt these iMac reboot issues are related to specific EFI versions failing to initialize graphics correctly.
Can anyone confirm this? If your iMac crashes, does Zapping the PRAM fix it?
I'll be calling Executive relations contact and telling her the bad news.
Okay, so first off, this isn't a solution to this iMac plague, but it should prevent the freezing and NO, it does not have to do with removing the ATI drivers.
I was asked to install Leopard by Executive relations at Apple and told her that, as soon as I do, my iMac will freeze. So, I have been preparing the Leopard install and have crashed 3 times, in a row... at that point I said, Leopard is going to be a no go but I needed to use my iMac without it crashing. So, zapped the PRAM like I did before and immediately the graphic freezes went away.
So

Here is my experience, iMac 24:
I bought in JR NY 2 weeks ago. I had to use it without internet connection (so no updates) and no freezes.
Then I connected to internet and installed the available updates and start to get the freezes, even trying the PRAM reset.
I tried to remove the extra memory, change memory slot but no lucky, video artifacts (like pixels not refreshing) when moving the mouse over the dock icons then freeze.
I had no other softwares installed at all, only the OS applications.
I formatted the HD and reinstalled the Tiger and didn't accepted any update, so I could use the imac for 2 days without a single freeze, but some black screens when screen saver starts.
Since no freezes, I decided to update the OS again and after the first boot the freezes came back very fast, I could start a freeze in about 10 seconds.
I tried the PRAM reset without sucess and my machine was ready to go to a tech person.
Yesterday I updated the OS to 10.4.11 and did a PRAM reset after the update and tested the machine for 2 hours without a freeze or video artifacts, looks very stable, but I have to test it more.
You guys tried the Tiger last update ?
Ulisses

Need confirmation on Import Batch to TCA Registry

Similar Messages

Maybe you are looking for