Need CUBE license for Existing 3945 GW Router ?

Hi
I already have a 3945 Router that have purchased long back
Now we are planning for a SIP TRUNK to Service provider ( PSTN).
We have UC License.
As we have not purchased CUBE license earlier with router , I would like to know
if its available to Purchase CUBE License and Session License
as spare ? if its Right to Use license..how to purchase and inegrate it with existing 3945 Router ?
==============================================================

It is a paper license. You need to contact you cisco reseller to purchase it.

Similar Messages

  • CME required CUBE license for ISP SIP Trunk

    Hi,
    We have IP telephony setup with CME 9.1 with 2921 ISRG2 router.
    Client would like to take ISP SIP trunk.
    Do we require CUBE license for the same.Because I tried in the 2851 router without the CUBE  license and its working fine.
    How I can check CUBE license installed my CME.
    When I check license in CME I can see that UC K9 and IPBasek9 license are permanent.
    Do this enough for the SIP trunk configuration.
    Thanks & Regards
    Nithin Louis.

    Just to add to George answer - CUBE licenses are somekind "honor" based right now which means you can configure everything and it will work but you need license paper for proving that you have adequate number of CUBE licenses for your system.
    Maybe in future Cisco will improve this with option that you will need to install license and only then it will work - like many other licensing right now...
    BR,
    Dragan

  • Addon 9.x licenses for existing deployment

    Can anyone please throw some light on Addon licenses that we need to pick for existing deployment.
    Scenario: I want to migrate 1000 DLU's to 9.x for which i will pick 'LIC-CUCM-9X-ENH-B' under R-UCL-UCM-LIC-K9 bundle and I need additional 300 enhanced plus users. Do I need to pick the same bundle twice - since Cisco does not allow me to select both migration skus and addon skus under the bundle 'R-UCL-UCM-LIC-K9' at one instance.
    I remember earlier we had 'CUCM-USR-LIC-ADD' bundle for 8.5/8.6 where we can select addon users - do we have any such bundle for 9.x.

    Hiya,
    You should indeed use the R-UCL-UCM-LIC-K9 code again for the add-on users. Below BoM for 10 addtional users based on UCL enhanced.
    1         R-UCL-UCM-LIC-K9                        1
              Top Level SKU For 9.x/10.x User License - eDelivery
    2         LIC-CUCM-9X-ENH-A                       10
              UC Manager-9.x Enhanced Single User-Under 1K
    3         CON-ESW-LICCENHA                        10
              ESSENTIAL SW UC Manager-9.x Enhanced Single User-Unde
    4         UCSS-U-UCM-A-3-1                        10
              UC Manager UCSS - 1 ENH User 3 Year Sub Tier A
    5         CUCM-VERS-9.X                           1
              CUCM  Software Version 9.X
    6         PC-10X-STANDARD-K9                      1
              Prime Collaboration Standard 10.x
    7         LIC-CUCM-9X-ENH                         10
              UC Manager Enhanced 9.x License
    8         UCM-PAK                                 1
              UCM 9X PAK
    9         CON-ESW-RUCLUCK9                        1
              ESSENTIAL SW Top Level SKU For 9.

  • Is mysql a free open source database or do you need a license for it in prd

    is mysql a free open source database or do you need a license for it in production.

    Hi,
    It should be free under GPL (General Public license).Usually it will comes with your operating system distribution (eg:RHEL)
    If you download it from Oracle site, it should have the commercial license tied to it, and you need to pay for that if it is in use for production.
    http://www.mysql.com/about/legal/licensing/index.html
    regards,
    mrak

  • Independent developer needs dev license for BW

    Hello.  What are the steps for an independent developer to get a non-trial license of BW for development purposes?
    Thanks,
    Tim

    Here is the "License FAQ" for the Connector. The PDK might have a different license.
    1. Do I need a developer license for the SAP connector for Microsoft .NET?
    Developer licenses are always required when SAP development tools and functionality are being used for development.
    2. We already use ABAP for development. Do we need additional licenses to use the SAP connector for Microsoft .NET?
    If you have existing developer licenses these named persons already have the required license to develop solutions based on the SAP connector for Microsoft .NET. If additional persons want to develop based on the SAP connector for Microsoft .NET, you will have to acquire additional developers licenses for them. In any case, all customers can download the SAP connector for Microsoft .NET from the SAP Service Marketplace under the Quick Link “Connectors”.
    3. How can I purchase developer licenses for the SAP connector for Microsoft .NET?
    To obtain the necessary license please contact your local SAP office.
    4. Do I need a runtime license for running an application that uses the SAP connector for Microsoft .NET?
    The runtime does not require any immediate license fees. However, please note that each user accessing application functionality through the SAP connector for Microsoft .NET is required to be licensed under a respective solution or component license.

  • Project Server 2010 Resource Assigments - Need a license for every Resource?

    I am trying to determine the requirements for Project Server 2010 licenses.
    In Project Server 2010, I need to add resources to the pool, then assign a resource to a project task.  The task will be maintained/statused through a manager, not the resource.  
    Does that resource need to have a Project Server license even if the resource never accesses Project Server even through PWA?

    Hi JenKranich,
    You need licences only for users that will access
    Project Server data by any means :
    MS Project Pro, Sharepoint sites and/or
    PWA.
    But resources not associated with users are not "real person" accessing data but just informal entity, thus no need for licences for those resources.
    It is important to note that if those resources can access the SharePoint site, since it contains Project Server data (risks, issues, deliverables), then they DO need a licence.
    Hope this helps.
    Guillaume Rouyre - MBA, MCP, MCTS

  • OEM - do I need a license for home use?

    Guys
    I installed Oracle 10.1 on Solaris 10 x86.
    Whenever I try to load http://localhost:5500/em, I get a permission denied error.
    01. This is for home use (learning). Do I need a license?
    Thanks in advance

    A few things to check:
    1. Check the installation Manual to ensure the owner(installer) of the software has all the required privilege granted to it and that the dbconsole is started by that user (instead of root).
    2. Check that you are accessing the correct port. It is not always in port 5500. Check the file $ORACLE_HOME/install/portlist.ini to ensure you are entering the right port.
    3. Check that you are using the correct host name. Use the name of the Server instead of localhost. Also if at install time you used the Long Servername (e.g ugoserver.ugonic.com.ng), you will have permission problem when /etc/hosts file has only the entry for the Short Servername (e.g ugoserver). So check and append the long Servername to the end of the line.
    4. Remember to have a look at emca.log file for more error message details

  • Need a license for CS4 ME

    Hi all,
    I want to buy license for adobe CS4 ME software but I cant find any seller/store that will sell me license.
    Is it possible that once the CS5 is out no one will sell CS4?
    and also, will a CS4 license key work with a CS4 ME software?
    Thanks in advance
    Eyal B.

    Hallo Eddy,
    Thanks for the fast reply. But it is still not completely clear for me.
    I have read the Licensing Guide of SBO but I still don't know what we have to do. We are an ISV and make add-ons. We are making an application where an operator in the warehouse can enter a delivery note to the system. This application is using DI API.
    According to what I can read in the licensing guide we need an add-on solution license. How do we get this for our application? How much does this costs?
    What does a customer has to buy from SAP if he has 2 users working with the application of SAP and 10 users that use an application that uses DI API? Is this 2 professional users licenses for x EUR and a license to use add-ons for x EUR?
    Thanks in advance for the reply
    Regards,
    Jeffrey

  • Need new license for upgrade of Sun Web 6.1 SP3 to SP5?

    I want to update my Sun Java System Web Server 6.1 2004Q3 SP3 to Sun Java System Web Server (Multi-Platform) 6.1 SP5 International Edition (essentially going from 6.1 SP3 to SP5). Will this version work with the license that I purchased last November 2005? It seems some of these downloads have a trial license that expires, since it is a full-install rather than just an upgrade piece.

    None of the Web Server 6.1 downloads are crippled or time bombed in any way. If you have a license for 6.1, you can (and should!) apply the latest 6.1 service pack without purchasing an additional license.
    The 6.1 service pack downloads can be used for new installations or to upgrade an existing 6.1 installation. To upgrade an existing installation, run the setup program and instruct it to install to the directory that contains the existing installation.

  • Do I need a license for Uninterruptible Power Supply?

    Hello!
    I want to monitor some infrastructure devices with SCOM 2012. Tell me please, do I need a management license for devices like:
    1) UPS (with integrated management modules available by SNMP)
    2) APC Netbotz with a number of sesnsors (Netbotz itself is available by SNMP)
    3) APC Data Center Expert (APC monitoring server with Linux OS, which can be integrated with SCOM by using management pack from APC).
    Thanks!

    You dont need any specific licenses for monitoring these devices with SCOM.
    www.coretech.dk - blog.coretech.dk

  • Is Solaris Cluster 4.0 Free?. whether we need any license for using it?

    I am able to Download the Solaris Cluster from the Oracle Site. But need to know whether we need any license to use it?

    Hello 1577859,
    and if you like to get the support updates you need a contract to get access to the Solaris Cluster support publisher.
    Hth,
      Juergen

  • Why do I need a hardwire for my WRVS4400N wireless router?

    I am not very technically inclined.  Plug and play is my way.  So when I got my first router (a linksys) i plugged in the ethernet cables and voila!-----internet access as well as connectivity for my xbox 360, ps3 and Wii.  The people rejoiced.
    Times change.  I was happy with my last Linksys hard-wired router, so when I finally got tired of all the wires laying around I went Linksys wireless.  BEST BUY told me the best wireless/hardwire router around is the WRVS4400N.  With this router I can have my 2 360's wireless as well as my pc.  The Wii and PS3 along with my wife's computer are hardwired.  There is also a hardwire going from the router to the Comcast cable modem.  Plug and play this, that and the other thing and voila!-----internet and gaming galore!  Once again, the people rejoiced.
    That is, until, I decided to make my wife's computer wireless.  The people rebelled.  Once my wife's pc went wireless (like my two 360's and pc),  I lost all connectivity.  No logging on to the playstation network, XBOX live, Wii surfing, and no internet access.  After many hours of turning off this, resetting that and plugging/unplugging the other thing, we finally figured out how to keep the people happy--one of the pc's has to be hard-wired to allow everything else to work (internet access, gaming, etc.).
    So the people are happy, but the king is not as his kingdom is bound by the tyranny of one ethernet cable.  Not to mention the fact that his wireless signal is unsecured.
    This makes no sense to me.  Why do I need one of the pc's to be hard-wired just to get everything else to work? 

    Trying to download firmware from this go_____ed company is like trying to pull teeth!  I mean, w_f?!  Are they trying to lose customers?
    I found answer ID 4030 and under step 2 it told me "to go to the Linksys download page, click here and verify the model and version number of your Linksys product."  I clicked on the link and that took me to "Support and Services."  I entered my model number where appropriate and that took me to some kind of small business section!  Small business?!?!?  I'm a bloody home user, not some f____ng businessman!!!!!
    Anyway, I click on this link:  Cisco Small Business (Linksys Business Series) software and firmware downloads (I know it says Small business, but where else was I supposed to go?  I mean, this is where Support and Services sent me).  That link took me to Support>Download Software.
    Under "Support>Download Software>Select a Software Product Category" I clicked on the Router Software link (which had a padlock icon next to it).  They wanted me to login again.  So I try, but I keep getting repeated (and erroneous) login errors telling me I entered my username and password incorrectly.  I checked my username and password many times.  No problems with my username or password.  Thus, a dead end there.
    I went to the "Support>Download Software>Software Search" and entered the model number of my router.  I clicked on this link:  Download Software for Cisco WRVS4400N Wireless-N Gigabit Security Router - VPN V1.0 & V1.1 : wrvs440....  Guess what?  They wanted me to login AGAIN!!!!!  So I try, but I get the same login error messages I got before!!!!!  Je___ _______ ____st!  Another dead end!
    I am at my wits end here.  Getting some kind of firmware for my router to work properly should not be this f____ng difficult!  I don't even know how to access my router's web user interface!
    Any other suggestions before I finally say goodbye to Linksys/CISCO?  Because I mean after this b______t experience, the next time I need some type of router or modem or something along those lines, I'm gonna think twice about going to Linksys/CISCO.
    P.S.  Sorry about my edited language, but if you had to go through what I did, I believe you'd be just as frustrated as I am.  I spent around $250.00 for this router and it doesn't even work right!!!!!
    Message Edited by JohnJr on 04-02-2009 10:07 PM
    Message Edited by JohnJr on 04-02-2009 10:08 PM

  • Does adobe digital edition need a license for business use?

    I would like to find out if a license is required to install Adobe Digital Editions for use in a business?

    I'm giving the same advice a few times on different threads, so I hope it's right.
    Digital Editions recognizes most dedicated eBook readers (as in the list) directly so they show up in ADE,
    but does not recognize tablets that have eBook capabilities.
    This includes android tablets (probably including KoboArc), and ios tablets such as iPad.
    If you have a tablet, you need to install an eBook reading app on it: I suggest Bluefire.
    Make sure Bluefire app is registered to the same AdobeID as your ADE.
    You can then copy epub files from your PC/Mac using a file manager and read them using Bluefire.
    (Apple makes it more difficult, you need iTunes, Dropbox or similar to copy).
    If the books are not DRM, there is no need to use ADE at all;
    either download them direct to the tablet and read on Bluefire, or download to the PC/Mac and copy.
    For DRM library books you will find an Overdrive app that allows books to be checked out, downloaded and read directly on an android/ios device.
    There are also dedicated apps from various vendors.

  • Additional Node License for existing cluster

    Hi,
    I am having two MCS servers having call manager version 8.5 installed in a single cluster. Now I have bought one new MCS server with the same version call manager and I want to add this node in the same cluster but I am having only two node license installed in my call manager cluster and that is already being used.
    Please help me how can I can get the license to add this additional node in the cluster. If I have to order something then please share the part code which I have to order.
    Thanks,
    Shaheen Sidana

    Nodes are free with version 8.5, however you need to order the free part number and receive a PAK, contact your Cisco reseller to submit the order or you can try sending and email to [email protected] to see if they can assist.
    HTH,
    Chris

  • MP4/H.264 video format license for selling videos

    Hello!
    I have searched on the forums and I did not find anything new about this topic.
    I create animated films and I want to export them as .mp4 with H.264 codec. Can I use these films with commercial purpose? (I want to sell the films to companies, as explainer videos, and also post them online to promote small/large companies). So what I would do is sell the film in .mp4 format.
    I also saw that H.264 is open source now. Is it also available for commercial purpose?
    If I need a license for Europe / Romania, where do I get it from?
    I am eagerly waiting for your answers,
    Thank you!
    aNDRA
    PS: I am a small firm (in my country it is called an authorized person aka freelancer)

    No one knows anything? It would be really helpful to get at least a link to where I can ask more about this
    I know about mpegla, but they seem to cover only USA? Are they for Europe as well?
    Thanks!

Maybe you are looking for